High precision determination accurate to 1 Lu for different lights
Operating Voltage: 3-5VDC
Built-in 16bit A/D converter
I2C interface
Current Ratio: 5 A:5 mA
Rated Primary Current at 50/60 Hz: 5 A
Winding D.C. Resistance at 20 °C: 155 Ω
Maximum Primary Current at 50/60 Hz: 20 A
Transformer Turns Ratio: Np:Ns = 1000:1
Digital I2S interface with high precision 24-bit data
High signal to noise ratio is 61 dBA
High sensitivity – 26 dBFS
Stable frequency response from 60 Hz to 15 kHz
Low power consumption: low current consumption 1.4 mA
High PSR: -75 dBFS
QUICK OVERVIEW:
Working voltage: DC 3.3-5V.
IC Chip: LM393
Signal output indication.
The output is digital.
Single channel signal output.
With the retaining bolt hole, convenient installation.
Output low level and the signal light when there is sound.
Adjustable wrist strap with alligator clip tip.
Inner conducting layer made of stainless shell filaments.
Durable Polyurethane-Coated Coil Cords.
High-Quality Strain relief.
The soft elastic band comfort.
Rinsing Resisting.
QUICK OVERVIEW:
The 41F is a switched Hall-effect IC designed for contactless switching applications. It incorporates various components on a single chip, including an on-chip Hall voltage generator for magnetic sensing, an amplifier to amplify the Hall voltage, a Schmitt trigger to provide switching hysteresis for noise rejection, and an open-collector output. This integrated design allows for precise and reliable switching in response to changes in magnetic fields without the need for physical contact, making it suitable for a wide range of applications requiring non-contact switching functionality.
Actuation Distance : 15 – 25 mm;
Connecting cable length: 30 cm.
Magnetic sensor alarm, control the switch of the circuit via the built-in magnet
Alarm when someone intrudes into your places
Can be used in places like apartment, hotel, office, etc.
Model No.: XH-W3001
Operating Voltage Range: 6 to 12V
Rated Power (W): 120W
Rated Current: 10 Amp Max.
Measurement Input: NTC10K
Temperature Measuring Range:-50C~110C
Temperature Control Range:-50C~110C
Control Accuracy: Upto 0.1
Measuring Accuraccy: 0.2
Working Voltage : 3 – 5.5V.
The maximum Current : 49mA 5V.
Range : 20cm to 800 cm
Quick review :
High Photo Sensitivity
Fast Response Time
Sensitivity adjustable
Detects a flame or a light source of a wavelength in the range of 760nm-1100 nm.
Detection range: up to 100 cm.
Adjustable detection range.
Detection angle about 60 degrees, it is sensitive to the flame spectrum.
Comparator chip LM393 makes module readings stable.
Operating voltage 3.3V-5V.
Digital and Analog Output.
QUICK OVERVIEW:
QUICK OVERVIEW
Probe sheath material: Stainless Steel
Style: B3950 10K
Resistance value: 10K ± 1%
Measurement range: -20 to 105 °C
Cable Length: 0.5 Meter
QUICK OVERVIEW:
QUICK OVERVIEW:
QUICK OVERVIEW:
Detection distance: 2-40cm
IO Interface: 4-wire interfaces (- / + / S / EN)
Output signal: TTL level
Adjustment: adjust multi-turn resistance
Effective angle: 35 °
QUICK OVERVIEW:
Capacity: 10KG
Rated output(MV/V): 2.0±0.15
Accuracy class: C2
Maximum number of laod cell verification intervals(N max): 2000
Minimum number of laod cell verification intervals(Vmin): EMax/5000
Combined error(%RO): <±0.030
Creep(%RO/30min): 0.03
Temperature effect on sensitivity(%RO/°C): 0.0016
Temperature effect on zero(%RO/°C): 0.003
Zero balance(%RO): 1.0
Input resistance(O): 402±6
Output resistance(O): 350±3
QUICK OVERVIEW:
QUICK OVERVIEW:
QUICK OVERVIEW
Power Supply Voltage: 3-5V
Dimensions: Approximately 14 x 14mm
Communication Interface: I2C
LED Wavelengths: Red and Infrared
Color: Purple
Temperature Coefficient Type: NTC (Negative Temperature Coefficient)
Thermal Time Constant: 10s
Resistance: 100kΩ
Tolerance: ±1%
Maximum Power Rating: 75mW
Maximum Operating Temperature: +150°C
Minimum Operating Temperature: -80°C
QUICK OVERVIEW
Operating Voltage(V): 5 ~30
Current Consumption Max: 5 mA
Detection distance(mm): 5 mm.
Type of detection: Inductive.
Cable Length: 100cm.
Response Frequency: 500Hz Max.
Protection class: IP 67.
Material: Acrylic
Dimensions: 50 x 40 x 18 (LxWxH) mm.
Weight: 8 gm
QUICK OVERVIEW
QUICK OVERVIEW:
QUICK OVERVIEW:
Input voltage: 3.0 V – 5.5 V
Output form: digital output (high and low level)
Detection distance: 0 – 4 cm (black and white line sensors)
0 – 5 cm (adjustable distance detection)
Using high-quality dual-panel design, with power indicator and TTL signal output instructions.
The switching signal having a DO (TTL) output and analog output AO.
TTL output valid signal is low.
The higher the voltage, the concentration of the analog output voltage is higher.
A hydrogen gas detection with good sensitivity.
Has a long life and reliable stability
QUICK OVERVIEW:
Low-noise Analog signal path
Device bandwidth is set via the new FILTER pin
5 µs output rise time in response to step input current
Small footprint, low-profile SOIC8 package
2.1 kV RMS minimum isolation voltage from pins 1-4 to pins 5-8
Supply Voltage: 4.5V~5.5V DC
Measure Current Range: 20A
Sensitivity: 100mV/A
Model: R20XC
USB Plug and Play.
RFID reader 0-8cm Reading Distance.
Windows/Android Supported.
S50/S70 Card Supported.
OTG Phone Connection.
Built-in buzzer and LED for identification.
QUICK OVERFVIEW:
QUICK OVERVIEW:
QUICK OVERVIEW:
QUICK OVERVIEW:
QUICK OVERVIEW:
QUICK OVERVIEW:
Model: SN04-P
Operating Voltage(V): 10 ~30
Current Consumption Max: 5 mA
Detection distance(mm): 5 mm.
Cable Length: 150 cm.
QUICK OVERVIEW:
Red LED checks the state of the proximity sensor
High repeated positioning accuracy
High switching frequency
Wide voltage range
Antivibration, dust, water, and oil prevention
Reverse power protection, short circuit protection, directly connecting with PLC
It can replace small switches and limit switches.
On orders above ₹999
Min. order ₹250 for COD
Available on all orders
Delivered across India
Toll Free: 1800 209 0998