QUICK OVERVIEW:
| Model number | MP135 |
|---|---|
| Item Weight | 1 g |
| Item Weight | 1 Grams |
| Item model number | MP135 |
This is a High-accuracy good quality IR sensor from Waveshare. Infrared Obstacle Avoidance IR Sensor Module (Active Low) has a pair of infrared transmitting and receiving tubes. When the transmitted light waves are reflected back, the reflected IR waves will be received by the receiver tube. The onboard LM393 voltage comparator circuitry does the processing
Liquid Temperature: Not More Than 60C
Rated Voltage: 5V
Max Current: 10mA( 5V)
Maximum water pressure: 1.75MPa
Flow range: 1-30L/min
Connector: Male XH-3P
External Thread Diameter: G1/2
Ingress Protection Rating: IP65
Color: Black
QUICK OVERVIEW:
QUICK OVERVIEW:
• Detects: TVOC, CO₂, CH₂O
• Communication: UART
• Features: Sensitive, low power, compact
• Resources: Manual & examples for Raspberry Pi, Arduino, ESP32
The sensor determines the concentration of alcohol in the air, the result can be obtained measuring the voltage on the analog output. The system is powered with the voltage from 2.5 V to 5 V. It has a digital and analog output, making it compatible with mostof the commissioning modules including Raspberry Pi and Arduino. The digital output
44E A1344EUA-T Hall
Digital Output Hall-effect sensor.
Operating voltage: typically 5V.
Output Current: 25mA.
It can be used to detect both the poles of a magnet.
49E Hall
Operating Supply Voltage: 3 V to 6.5 V;
Operating Supply Current: 3.5 mA;
Maximum Output Current: 10 mA
Digital Output Hall-effect sensor.
Operating voltage: typically 5V.
Output Current: 25mA.
It can be used to detect both the poles of a magnet.
Suitable for Remote Applications
• Low-Cost Due to Wafer-Level Trimming
• Operates From 4 V to 30 V
• Less Than 60-μA Current Drain
• Low Self-Heating, 0.08°C in Still Air
• Non-Linearity Only ±¼°C Typical
QUICK OVERVIEW:
Operating Voltage : 5v
Temperature measurement range : -55°C to 125°C.
Measurement Accuracy : ±0.5°C.
QUICK OVERVIEW
Model number: TEC1-12706
Operating Voltage: 12V
Maximum Voltage Umax (V): 15.4V
Maximum Current Imax (A): 6A
Maximum Power: 92 W
Maximum Temperature: 138°C
Power Cord: 200mm
Rating contract (Max.): 10 W
Switching power supply (Max.): 110VDC
Resistance contract (Max.): 100 Ω
Appro. Float Ball Size (mm) : 24×17 (LxD)
Body Total Length (mm) : 85
Cable Length (cm) : 37
Total Float opening: 70°
Switch ON/OFF angle Approx. betn 15° to 20°
LED peak wavelength: 660nm/880nm
LED power supply voltage: 3.3~5V
Detection signal type: light reflection signal (PPG)
Output signal interface: I2C interface
Humidity measuring range: 20%~90%RH(0~50 degree
Temperature measuring range: 0~+50degree.
Humidity measurement accuracy: ±5.0%RH.
Temperature measurement accuracy: ±2.0degree.
Low power consumption.
Relative humidity and temperature measurement
All calibration, digital output
Excellent long-term stability
Operating Voltage: 3.5V-5V
Supply Current: 15mA
Optimal Sensing Distance: 3mm
Designed with the reflected infrared sensor, indicator light.
Built in a potentiometer for sensitivity control.
On-board LM393 voltage comparator chip and infrared sensing probe TCRT5000L
Signal detection sensitivity can adjust
Reserve all the way more circuits (P3 voltage drawn)
Voltage: 12v/24v
Power: 3A
Delay time: 20-60s
Detecting range: 120 degrees
Detecting distance: 1-3m
Technical Indexes: BF series
Strain limit: 2.0%
Fatigue life: ≥1M
Resistance: 350 ohms
Contrast: 800: 1 (Min) (transmission)
Sensitivity Co-efficient: 2.00-2.20
Small Module.
Very easy to use.
Glass Length: 14mm
Glass Diameter: 2mm
Total Length: 45mm
Max. Switching Voltage: 300 VDC
Min. Breakdown Voltage: 150 VDC
Max. Contact Rating: 10W
Max. Switching Current: 0.55 A
Max. Operate time: 0.45 ms
Temperature range: -50°C ~ +110°C
Temperature display resolution: ±0.1
temperature measurement accuracy: 1°C
Cable Length: 1M
Display Dimensions : 48 x 29 x 16 (LxWxH) mm.
Easy to use, small and handy module.
Contact Rating: 10 W.
Switching Voltage: 220 V.
Switching Current: 0.5 A.
Breakdown Voltage: 220 VDC.
Carry Current: 1 A.
Contact Resistance: 100 mΩ.
QUICK OVERVIEW:
QUICK OVERVIEW
LM393 based design.
Can detect ambient brightness and light intensity.
Adjustable sensitivity (via blue digital potentiometer adjustment).
Output Digital – 0V to 5V, Adjustable trigger level from preset.
LEDs indicating output and power.
Operating Voltage: 3.3V to 5V DC.
Operating Current: 15ma.
Main chip: LM393, Electret condenser microphone
Working voltage: DC 3.3-5V
Induction distance is 0.5M
Signal output Indication
Single channel signal output
The output effective signal is low level.
On orders above ₹999
Min. order ₹250 for COD
Available on all orders
Delivered across India
Toll Free: 1800 209 0998