Buy sensor modules online in India at Zbotic. We offer one of the largest selections of sensors in India including temperature and humidity sensors, ultrasonic distance sensors, gas and air quality detectors, LiDAR modules, IMU and gyroscope modules, PIR motion sensors, load cells, pressure sensors, pH and water quality sensors, soil moisture sensors, current and voltage sensors, and many more. All our sensor modules are compatible with Arduino, ESP32, Raspberry Pi, and other popular microcontroller platforms. Perfect for IoT projects, robotics, home automation, environmental monitoring, and industrial applications.
44E A1344EUA-T Hall
Digital Output Hall-effect sensor.
Operating voltage: typically 5V.
Output Current: 25mA.
It can be used to detect both the poles of a magnet.
Model: AS-10-220
Input Voltage: AC 220V
Max Load Current: 10A
Frequency:50-60Hz
Load power: 2200W
Off delay time: 0.1S
Small Module.
Very easy to use.
Glass Length: 14mm
Glass Diameter: 2mm
Total Length: 45mm
Max. Switching Voltage: 300 VDC
Min. Breakdown Voltage: 150 VDC
Max. Contact Rating: 10W
Max. Switching Current: 0.55 A
Max. Operate time: 0.45 ms
Model: YF-S401
Working Voltage: DC 3.5V~24V
Maximum Working Current: 15mA @ 5V DC
Flow Rate Range: 0.3~6L/min
Connection: 6mm (external diameter)
Inlet Water Pipe Diameter: 2.5-4mm
Load Capacity: ≤10mA (DC 5V)
Temperature range: -50°C ~ +110°C
Temperature display resolution: ±0.1
temperature measurement accuracy: 1°C
Cable Length: 1M
Display Dimensions : 48 x 29 x 16 (LxWxH) mm.
Easy to use, small and handy module.
Sensitivity to Ammonia, Sulphide and Benzene steam
Sensitive for benzene, alcohol, smoke
Fast response and recovery
Adjustable sensitivity
Signal output indicator
Output voltage boosts along with the concentration of the measured gases increases.
Technical Indexes: BF series
Strain limit: 2.0%
Fatigue life: ≥1M
Resistance: 350 ohms
Contrast: 800: 1 (Min) (transmission)
Sensitivity Co-efficient: 2.00-2.20
QUICK OVERVIEW
QUICK OVERVIEW:
QUICK OVERVIEW
Operating Voltage: 3.3 ~ 5.5 VDC.
Operating Current: 5mA.
Interface: PH2.54-3P.
Dimensions mm(LxWxH): 98 x 23 x 4.
Supports 3-Pin Gravity Sensor interface
Analog output.
Weight (gm): 15.
Low noise operation.
Small fog particles.
High stability.
Driving Voltage: DC 5V.
High Conversion Efficiency.
Low Impedance Stable Waveform.
High sensitivity to Ammonia, Sulfide and Benzene
Stable and Long Life
Detection Range: 10 – 300 ppm NH3, 10 – 1000 ppm Benzene, 10 – 300 ppm Alcohol
Heater Voltage: 5.0V
Dimensions: 18mm Diameter, 17mm High excluding pins, Pins – 6mm High
Long life and low cost
QUICK OVERVIEW
Operating voltage:( 5V DC).
Detector distance: (1CM).
Adjust the potentiometer, let the modules work normally.
Small and easy to use module.
It comes with a Buzzer for metal detection indication.
Power Supply: 3.3~5.5V DC
Output: 4-pin single row
Measurement Range: Humidity 20-90%RH, Temperature 0~50℃
Accuracy: Humidity ±5%RH, Temperature ±2℃
Resolution: Humidity 1%RH, Temperature 1℃
Interchangeability: Fully Interchangeable
Long-Term Stability: <±1%RH/year
Operating Voltage: 3.5V to 5.5V
Operating current: 0.3mA (measuring) 60uA (standby)
Output: Serial data
Temperature Range: -40°C to 80°C
Humidity Range: 0% to 100%
Resolution: Temperature and Humidity both are 16-bit
Accuracy: ±0.5°C and ±1%
Operating Voltage(V): 5 ~30
Current Consumption Max: 5 mA
Detection distance(mm): 5 mm.
Type of detection: Inductive.
Cable Length: 100cm.
Response Frequency: 500Hz Max.
Protection class: IP 67.
QUICK OVERVIEW
The width of the optical coupling slot: 10mm
With a signal output indication.
Single signal output
The circuit board output switch!
The output valid signal is low.
Heating Material: PTC Thermistor
Shell Material: Aluminum
Lead wire: Silicone Line
Voltage: 12V
Power: 30W
Surface Dry Heating Temperature: 220ºC
Output Channel: 1
Power Supply: 3.3/5V
Built in a potentiometer for sensitivity control.
Onboard signal output indication, output effective signal is high, at the same time the indicator light up, the output signal can directly connect to microcontroller IO.
Detection angle about 60 degrees, the flame spectrum especially sensitive.
The flame of the most sensitive sensors flames, the regular light is also a response, generally used for fire alarm purposes.
Heating voltage: 5±0.2V
Working current: 5-10mA
The detection concentration range: PH0-14
The detection range of temperature: 0-60 centigrade
The response time: ≤ 5S
Stability time: ≤ 60S
Power consumption: ≤ 0.5W
Power supply voltage of 2.5 V ~ 5 V
Low power consumption
Wide detection range: 240 nm to 370 nm
Wide Angle: 130 degrees
Schottky type photosensitive diode
Good linear response
High sensitivity
Model: SN04-P
Operating Voltage(V): 10 ~30
Current Consumption Max: 5 mA
Detection distance(mm): 5 mm.
Cable Length: 150 cm.
QUICK OVERVIEW
QUICK OVERVIEW:
QUICK OVERVIEW:
On orders above ₹999
Min. order ₹250 for COD
Available on all orders
Delivered across India
Toll Free: 1800 209 0998