2 Channel 12V Relay Module Solid State High Level SSR DC Control 240V 2A with Resistive
SKU: AI3161- Part Number: G3MB-202P
- Power supply:12VDC/160mA
- Switching Voltage (VAC):240@2A
- Isolation: Phototriac
4 CHANNEL USB QC3.0 QC2.0 DC-DC Buck Converter Charging Step Down Module 6-32V 9V 12V 24V to Fast Quick Charger Circuit Board
SKU: AI6289 ₹328.04 (₹278.00 + GST)- Input voltage: 6~32V
- Type: 6-32V DC-DC Buck Converter Step Down to Fast Quick Charger Circuit Board
- Material: Metal + Plastic
- Output voltage: default 5V, automatically adjust between 3-12V after triggering fast charge
- Output power: up to 24W (5V/3.4A, 9V/2.5A, 12V/2A, etc.)
- Output voltage cable compensation function
- Conversion efficiency: 90%-97%
2 Channel USB QC3.0 QC2.0 DC-DC Buck Converter Charging Step Down Module 6-32V 9V 12V 24V to Fast Quick Charger Circuit Board
SKU: AI5915 ₹194.70 (₹165.00 + GST)- Two channels, allowing you to simultaneously charge two USB devices.
- Supports Quick Charge 3.0 (QC3.0) and Quick Charge 2.0 (QC2.0) standards.
- Accepts input voltages in the range of 6-32V. This flexibility allows the module to be used in various applications with different power sources, such as automotive systems (12V), power adapters, or other DC power supplies.
DC-DC 5A Step-Down Constant Voltage Constant Current MPPT
SKU: AI3860QUICK OVERVIEW:
- DIY a voltage Regulator, with constant current function, Short-circuit proof, can protect the load.
- It can power supply for electronic devices.
- For a variety of battery charge, can observe the state of charge.
- charger for all kinds of batteries, with MPPT function, can enhance the charging current to double. With a constant current and prevents battery overcharge, effective protection of the battery.
- it can support high-power LED.
- As a car power supply , it can for your cell phone or digital products supply.
2 x 2 Matrix 4 Push Button Keyboard Module
SKU: AI3437
QUICK OVERVIEW:
- 2×2 Matrix Keyboard Module with 4 buttons
- Small in size and hence Save space
- More convenient to use
- Expanded development application modules for single chip
- With 4 keys and 4 pin
SD Card Reading Writing Module for Arduino
SKU: AI2454 ₹53.10 (₹45.00 + GST)QUICK OVERVIEW:
- All SD SPI pins output, MOSI, SCK, MISO, and CS.
- Support 5V/3.3V input.
- This module can handle 2GB SD cards.
- Size:4.7 x 3.1 cm.
- LED indicator.
- SD Card Holder.
- Onboard 3.3V regulator (AMS1117-3.3) for +5v to 3.3V generation. 3.3V is also available as output.
Red Electronic Building Blocks Big Key Button Module High Level Output
SKU: AI3081 ₹19.12 (₹16.20 + GST)
QUICK OVERVIEW:
- Product: Red Electronic Building Blocks Big Key Button Module High Level Output
- Interface: Standard electronic block (GND, VCC, SIG)
- Working voltage: 2-5.5VDC
- Working Current: 0.55mA(MAX)
- Output: digital level (press high, release low)
- Great for DIY projects
Momentary Tactile Push Button Module DC 5V Switch
SKU: AI2539 ₹25.96 (₹22.00 + GST)
Operating Voltage: 5V
Contact Resistance : 50mΩ max (initial)
Electrically Life:100,000 cycles
Environment temperature: -25°C to +105°C
Operating Force: 180/230(±20gf)
Seal temperature:250ºC-280ºC
I/O pins: 3 pins
Solar Energy Step-down and Step-up Module Red
SKU: AI3543
QUICK OVERVIEW:
Output Current: 12V to 5V maximum 2A (output other voltage, calculated by 15W current, formula 15 / output voltage = output current)
Output Power: maximum 15W (such as high temperature please strengthen the heat)
Add to cart
Add to Compare
Reed Switch Module
SKU: AI2586 ₹61.36 (₹52.00 + GST)
QUICK OVERVIEW:
- Working voltage 3.3V-5
- Output format: digital switching output (0 and 1)A
- fixed bolt holes for easy installation
8 Road/Channel Relay Module (with light coupling) 24V
SKU: AI2405 ₹388.22 (₹329.00 + GST)QUICK OVERVIEW:
- Operating Voltage: 24V DC
- Equipped with high-current relay [email protected] / [email protected]
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- LED Status indicators to indicate the relay ON/OFF status
- Mounting holes provided
Waveshare USB to RS232/485 Industrial Grade Isolated Converter, Onboard Original FT232RNL Chip, Multiple Protection
SKU: AI6705 ₹1,886.82 (₹1,599.00 + GST)- Input Voltage: 6V~24V
- Output Voltage: 5V
- Output Current: 3A
- Charging Method: Solar panel or Type-C connector
- Protection Circuits: Over-charge, over-discharge, overheat, over-current
- Charging Indicator: LED indicators for solar panel and battery status
12V 8 Channel Relay Module
SKU: AI0336 ₹370.52 (₹314.00 + GST)Quick Overview:
- Using high-current relay, AC250V 10A DC30V 10A.
- Contact some independent wiring, safe and reliable.
- The standard interface can be extended to a variety of development boards.
- With fixed screw holes for easy installation.
- Suitable for a variety of platforms such as 8051/AVR/AVR/ARM.
Dual Display 3A DC-DC 5-23V To 0-16.5V Step Down Power Supply Buck Converter Adjustable LCD Step- down Voltage Regulator Without Case
SKU: AI6242 ₹636.02 (₹539.00 + GST)- Input voltage: 5-23V.
- Converter Type: DC-DC.
- Quantity: 1pc.
- Display Accuracy: 1%.
- Module Size: 62*44*18 mm.
5V 8 Channels Relay Module High and Low, Triggering Optocoupler, Isolation Relay Module, PLC Signal Amplifier, Board
SKU: AI3253
QUICK OVERVIEW:
- Trigger Voltage :5
- Switching Voltage (VAC) :10A 277VAC
- Switching Voltage :12A 125VAC
W5100 Ethernet Module Ethernet Network Module for Arduino
SKU: AI0256Quick Overview
- Support Hardwired TCP/IP Protocols: TCP, UDP, ICMP, IPv4 ARP, IGMP, PPPoE, Ethernet
- 10BaseT/100BaseTX Ethernet PHY embedded
- Auto-Negotiation (Full-duplex and half duplex)
- Support Auto MDI/MDIX
- Simultaneously Supports to 4 independent sockets
- 0.18 µm CMOS technology
- 3.3V operation with 5V I/O signal tolerance
- 8. Provide Serial Peripheral Interface (SPI MODE 0, 3) support
LilyPad Buzzer
SKU: AI0731 ₹94.40 (₹80.00 + GST)QUICK OVERVIEW
- Wearable e-textile technology.
- Available Various input, output, power, and sensor boards.
- Washable
Waveshare RS485 CAN HAT for Raspberry Pi
SKU: AI1541 ₹824.82 (₹699.00 + GST)- Operating voltage: 3.3V
- CAN controller: MCP2515
- CAN transceiver: SN65HVD230
- 485 transceiver: SP3485
- Mounting hole size: 3.0mm
Type-C Input QC2.0/3.0 Decoy Module Boost Trigger Motherboard 9V 12V 20V Adjustable Power Supply
SKU: AI3060 ₹206.50 (₹175.00 + GST)- Product name: Type-C Input QC2.0/3.0 Decoy Module
- Input voltage: DC 5V
- Output voltage: 5V>9V>12V>15V>20V
- Maximum output voltage: 20v
- Maximum output current: 5A
- Working temperature: -25 ℃ ~ 85 ℃
- Working humidity: 5% ~ 95% RH
USB Input QC2.0/3.0 Decoy Module Boost Trigger Motherboard 9V 12V 20V Adjustable Power Supply
SKU: AI3062
Product name: PD2.0/3.0 decoy
Input voltage: DC 5V
Output voltage: 5V>9V>12V>15V>20V
Maximum output voltage: 20v
Maximum output current: 5A
Working temperature: -25 ℃ ~ 85 ℃
Working humidity: 5% ~ 95% RH
Add to cart
Add to Compare
Optical Endstop Light Control Limit Optical Switch
SKU: AI2550 ₹66.08 (₹56.00 + GST)QUICK OVERVIEW:
- Increased reliability
- Increased precision
- Dimensions : 33 x 20 x 10 mm.
- Weight: 25 gm.
- Optical Endstop Switches help to protect your 3D printer or machine from moving past its intended range and damaging itself.
Waveshare RS485 to Ethernet Converter
SKU: AI0803 ₹2,476.82 (₹2,099.00 + GST)
Communication rate: 10/100Mbps
Baudrate: 600bps~230.4Kbps
Power supply: 5.0~7.0V (EU plug)
Operating current: 150mA (@5V)
Power consumption: <1W
MINI560 DC 5V 5A, Step-Down Stabilized Module
SKU: AI2538 ₹93.22 (₹79.00 + GST)
Model: MINI560
Type: Power Module
Power supply current: 5A
Power supply voltage: 5V
colour: as shown
Material: PCB
Size: 2.9×1.8×0.54cm
10000W Original Chips Thyristor Super Power Electronic Regulator can Change Light Speed and Temperature
SKU: AI3907 ₹991.20 (₹840.00 + GST)
QUICK OVERVIEW:
Add to cart
Add to Compare
- Use voltage: AC 220V
- Maximum power: 10000W resistive load limit power, room temperature is recommended for 5000W for a long time
- Voltage regulation: 0-100% (220 volts, 100-level adjustment, non-linear)
- It is suitable for water heater heat transfer, lighting dimming, small motor speed, electric iron thermostat
- It can be used in large appliances with an electric power of less than 10,000 watts.
CJMCU-4051 74HC4051 8 Channel Analog Multiplexer/Demultiplexer Breakout Board for Arduino
SKU: AI3436QUICK OVERVIEW:
- Wide Analog Input Voltage Range: +/-5V
- Low “ON” Resistance: 80 ohm (type) at Vcc = 4.5V; 70 ohm (type) at Vcc = 6.0V; 60 ohm (type) at Vcc=9.0V
- Logic Level Translation: to enable 5V to communicate with +/-5V analog signals
- Board Size: 30 x 19 mm
Arduino PCF8574T I2C 8 Bit IO GPIO expander module
SKU: AI6320 ₹73.16 (₹62.00 + GST)- Item Type: PCF8574T
- Communication Protocol: I2C
- Digital Pins: 8 additional GPIO pins
USB Adapter Board Male To Female Adapter Micro USB/Type-C Interface 4P 2.54mm
SKU: AI6346 ₹64.90 (₹55.00 + GST)- Product Number: XY-USB4
- Voltage: 5VDC
- Temperature range: -20℃ ~ 85℃
- Working Humidity range:0%-95%RH
- 2.54 mm – 4P (VCC/D-/D+/GND)
- It is stable.
- Multiple interfaces
Waveshare USB to RS232/485 Serial Converter, Onboard Original FT232RNL Chip
SKU: AI6712- Chipset: Original FT232RNL
- Multiple devices applicable
- Multi-OS compatible
- Transmission distance: About 5mOperating voltage: 5V
- Operating Systems: Compatible with Mac, Linux, Android, Windows 11/10/8.1/8/7
5D Rocker Joystick for Arduino, MCU, AVR Game
SKU: AI5926 ₹69.62 (₹59.00 + GST)- Supports up/down/left/right/middle with extra set and reset button
- 2V-9V wide working voltage
- The number of IO: 7
- Operating temperature: -40℃ to 85℃
- Size: 4×2.5cm
Stainless Steel 1m Conductive Thread Wire for Wearable Lilypad (Pack of 5)
SKU: AI3352 ₹86.14 (₹73.00 + GST)QUICK OVERVIEW:
- Material: 12UM Stainless steel fiber
- Gram Weight: 0.2458g/m
- Strength: 2.8KGF.
- Length: 1m.
- Diameter(mm): 0.12.
- Resistance (Ω/m) : 27.
- 12m per spool (on plastic spools).
DC 12V Bluetooth 4 Channels Relay Module, Internet Smart Remote, Control Mobile Phone, Switch Wireless Relay
SKU: AI3152Effective Control Distance (on open area): 10m
Operating Voltage: 12VDC
Relay Type: 12V, 10A / 250V AC, 10A / 30V DC
Relay Endurance: 100,000 cycles continuously
LM7806 6V DC / AC, Three Terminal Voltage, Regulator Power
SKU: AI2524
QUICK OVERVIEW:
- Input Voltage: 9-24V DC/AC
- Output Voltage: 6V DC
- Max Current: 1.2A
Waveshare Industrial Grade Isolated RS232 to RS485 Converter (With Power Adapter)
SKU: AI6116 ₹1,886.82 (₹1,599.00 + GST)
QUICK OVERVIEW:
Add to cart
Add to Compare
- Product type: industrial-grade isolated converter
- Baudrate: 300-921600bps
- Device port: RS232/RS485 standard complaint
- 1200m transmission distance of RS485
- 15m transmission distance of RS232
DC-DC 0-32V 12A, Constant Current LCD, Digital Display, Adjustable Voltage Buck, Step Down Power, Supply Module Board, （With Case）
SKU: AI2447 ₹1,082.06 (₹917.00 + GST)
QUICK OVERVIEW:
- Working Voltage: DC 5.3V-32V
- Output Voltage: DC 1.2V-32V
- Output Current: 12A (12A need a heat sink, 8A is stable for long time)
- Output Power: 160W(160W need heat sink, 120W is for 8A)
- Voltage Display Range: 0 -32V
- Voltage Display Precision: ±0.5V
- Voltage Display Resolution: 0.05V
- Current Display Range: 0 -12A
- Current Display Precision: ±0.3A
- Voltage Display Resolution: 0.01A
- Conversion efficiency: About 96%
Mini SD Card MP3 Sound Module For PIC Arduino WTV020-SD
SKU: AI0725 ₹141.60 (₹120.00 + GST)Supports FAT file system SD carrier
Supports playing of 4Bit ADCPM format files
Recognize the voice files automatically
Support microprocessor and key control
Audio output: 16bitDAC and PWM
Maximum voice storage: 512 voice
Operating voltage: DC 2.6 to 3.6V
Quiescent current: 16 μA (SD card is not inserted)
Waveshare PL2303 USB UART Board (Type C), USB To UART (TTL) Communication Module, USB-C Connector
SKU: AI1563 ₹305.62 (₹259.00 + GST)- Adopts PL2303GS new version device
- Supports windows XP/7/8/10/11/
- 3x LED indicators: TXD, RXD, PWR
USB2.0 Audio Video Capture Card Adapter VHS To DVD Video Capture Converter
SKU: AI4293 ₹384.68 (₹326.00 + GST)USB2.0 Audio Video Capture Card Adapter VHS To DVD Video Capture Converter
WS2812B 5V Addressable RGB IP67 Waterproof LED Strip – 5m
SKU: AI2573 ₹2,621.96 (₹2,222.00 + GST)
QUICK OVERVIEW:
- 5m total length.
- 60 LEDs/m.
- 24-bit color control (8-bit PWM per channel).
- 16.8 million colors per pixel.
- The one-wire digital control interface.
- Each RGB LED draws approximately 50 mA at 5 V with red, green, and blue at full brightness.
- Waterproof.
80W DC10-35 to 1-35V Automatic Voltage Up and Down Voltage Stabilized Constant Current Power Supply Module
SKU: AI3844 ₹647.82 (₹549.00 + GST)QUICK OVERVIEW:
- Input voltage : DC 10 – 35 V
- Output Voltage : DC 1-35 V(Adjustable)
- Output Current : 8.5A(MAX)
- Input current : 12A (MAX) ( heatsink will be necessary for over 6A)
- Output Power : natural cooling 80W (MAX)
- Conversion efficiency : 90.5% Max (14V to 12V 2A)
- Ripple and Noise : 200mVp-p
- No-load current : 6mA typical
- Voltage regulation : ± 0.5%
- Load regulation : ± 0.5%
- Dynamic response speed : 300uS
4 Channel 5V Relay Module Solid State High Level SSR DC Control 250V 2A with Resistive
SKU: AI3163 ₹358.72 (₹304.00 + GST)- Part Number: G3MB-202P
- Power supply:5VDC/160mA
- Trigger Voltage (VDC):5
- Switching Voltage (VAC):240@2A
- Isolation: Phototriac
Waveshare FT232 USB UART Board (Micro-USB)
SKU: AI1532
This is the FT232 USB UART converter Board. This is a great little tool for embedded systems that require a...
Add to cart
Add to Compare
USB Blaster ALTERA CPLD/FPGA Programmer
SKU: AI5961 ₹258.42 (₹219.00 + GST)- Stably support SignalTap II embedded logic analyzer function, no mistake while crawling data.
- Fully support all Altera products such as CPLD: MAX3000, MAX7000, MAX9000 and MAXII.
- FPGA: Stratix, StratixII, StratxIII, Cyclone, CycloneII, CycloneIII, ACEX1K, APEX20K and FLEX10K etc.
- Active serial configuration device: EPCS1, EPCS4, EPCS16, EPCS64 etc.
- Enhanced configuration devices: EPC1, EPC4.
- Supports 3 download mode: AS, PS and JTAG.
Full Color LED Module / RGB V2 Light Water for Arduino
SKU: AI1089 ₹92.04 (₹78.00 + GST)Good PRINT PACK design, very beautiful.
8 worlds of the three primary colors (red-green-blue) LED color, scanning control mode.
Applicable for various platforms, such as 51 / AVR / AVR / ARM / for Arduino All kinds of platforms.
DC-DC 2V-5V to 5V Step Up Boost Power Supply Module
SKU: AI2997 ₹69.62 (₹59.00 + GST)QUICK OVERVIEW:
Input voltage: 2V-5V
Maximum current: 600mA
Output voltage: 5V
Maximum efficiency: 75%
4×4 Matrix 16 Push Button Keyboard Module
SKU: AI3225 ₹74.34 (₹63.00 + GST)
QUICK OVERVIEW:
- 4×4 Matrix Keyboard Module with 16 buttons
- Small in size and hence Save space
- More convenient to use
- Expanded development application modules for single chip
- With 16 keys and 8 pin
- Keypad dimensions: 39mm x 43mm x 6mm
24V 8 Channel Relay Module
SKU: AI3213 ₹416.54 (₹353.00 + GST)QUICK OVERVIEW:
- Header connector for connecting power and trigger voltage.
- LED on each channel indicates relay status.
- Screw terminal connector for easy relay output and aux power connection.
DC-DC5-40V to 5V 1A Buck Step Down Converter Module with PIN
SKU: AI3005- Input voltage 5~40V
- Output: 5V
- Maximum output current 1A
- Efficiency: 76-90%
- Material: electronic component
12V Relay Module with Automatic Delay Timer
SKU: AI2781 ₹428.34 (₹363.00 + GST)QUICK OVERVIEW:
- Operating Voltage: 12VDC
- Output Capacity: Can Control the Load within DC 30V 5A or AC 220V 5A
- Working Current: 50mA
Waveshare Solar Power Manager (C) Supports 3x 18650 Batteries Multi Protection Circuits
SKU: AI0877 ₹1,791.24 (₹1,518.00 + GST)
Supports MPPT (Maximum Power Point Tracking) function, maximizing the efficiency of the solar panel
Flexible battery recharging: from the solar panel as well as USB TYPE-C power adapter
Compatible with 6V~24V solar panels, DC-002 jack input or screw terminal input
Heavy Aluminium body with a stylish finish and Multi status LEDs
Batteries can be easily replaced by removing the cover.
5V/7-28V ESP8266 WIFI 8 Channel Relay Module ESP-12F Development Board
SKU: AI3251 ₹1,568.22 (₹1,329.00 + GST)
QUICK OVERVIEW:
- Board size: 149*80mm
- Weight: 140g
- Power supply mode supports DC7-28V/5V
- Onboard WIFI module RST reset button
- 4M Byte Flash
24V 4 Channel Relay Module
SKU: AI3212QUICK OVERVIEW
- Header Connector for connecting power and trigger voltage.
- LED on each channel indicates relay status.
- Power Battery Terminal (PBT) for easy relay output and aux power connection.
24V 6 channel with light coupling relay
SKU: AI2398 ₹261.96 (₹222.00 + GST)
2V relay with AC contact capacity of 10A 250V and optocoupler protection.
The onboard power supply module does not need an external power supply. I / O port driver is active low.
The module can be used as a microcontroller development board module and also as appliance control, PLC extended output.
It is using the industry’s top-quality isolation optocouplers, strong anti-jamming ability, stable performance.
The 1-16 road can be any full-on/off or any road.
All interfaces can be directly connected through the terminal leads, very convenient.
1 Channel Relay Module, 30A with Optocoupler, Isolation 24V Supports, High and Low Triger（with Guide Rail)
SKU: AI3142 ₹392.94 (₹333.00 + GST)- Channel: 1 channel
- Comes with GUIDE RAIL
- Relay Voltage: 24V
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
PCF8563 RTC Board For Raspberry Pi Real Time Clock Module-Blue
SKU: AI0949 ₹271.40 (₹230.00 + GST)
Model: PCF8563
Weight : 3 gm.
I2C pin header,
3.3V battery.
Dimensions : 61 x 16 x 11 mm (LxWxH).
Precision AC-DC 220V to24V 200MA（5W）Step Down Converter Power Supply Module Transformer
SKU: AI3851 ₹293.82 (₹249.00 + GST)Input Voltage: 220VAC
Output Voltage: 524VDC.
Output Power: 5W.
Output overload and short circuit protection.
2 Channel 3-24V Relay Module Solid State Low Level SSR DC Control DC with Resistive Fuse
SKU: AI3157- Part Number: H3MB-052D
- Power supply:3-24VDC/160mA
- Trigger Voltage (VDC):3-24 VDC
- Switching Voltage (VAC):50@2A
- Isolation: Phototriac
Waveshare Industrial USB TO 4Ch RS485 Converter, Multi Protection Circuits, Multi Systems Support, Aluminium Alloy Case
SKU: AI6669 ₹1,832.54 (₹1,553.00 + GST)- Product Type: Industrial Grade USB to RS485 converter
- Host Port: USB
- Baudrate: 1200bps to 460800bps
- Operating voltage: 5V
Waveshare Industrial USB TO 4CH TTL Converter, USB To UART, Multi Protection & Systems Support
SKU: AI6668 ₹1,453.76 (₹1,232.00 + GST)- Working voltage: 5V
- Working current: 32mA
- Serial Baud rate: 1200bps ~ 460800bps
- TTL voltage: 3.3V / 5V (configurable)
- Working temperature: -40°C ~ 85°C
- Supported OS: Mac OS, Linux, Windows 11/10/8.1/8/7, Android
Waveshare Industrial Isolated Multi-Bus Converter, USB / RS232 / RS485 / TTL Communication
SKU: AI2046 ₹2,240.82 (₹1,899.00 + GST)
The Multibus Converter is an industrial grade isolated converter that supports USB / RS232 / TTL to RS232 / 485 / TTL, with built-in power...
Add to cart
Add to Compare
Waveshare Industrial grade USB HUB , Switchable dual hosts, Multi Protections
SKU: AI6708 ₹2,358.82 (₹1,999.00 + GST)- Standard High-Speed USB 3.2 Gen 1
- Data Rate Up To 5gbps
- USB Output 5v@imax:1.2a, Usb-a Connector
- USB Hub Input 5v, Switchable Dual Usb-a Connectors
- External Power Dc Power Supply Terminal 7~36v
12V Cold White 5050 SMD LED Strip- 5Meter
SKU: AI2826 ₹518.02 (₹439.00 + GST)
QUICK OVERVIEW:
- LED Glow Color: Cold White
- Strip Length: 5 Meter
- Operating Voltage: 12V DC
- Strip width: 10 mm
- No. of LEDs: 60LED/Meter
- Protection Level: IP20 (Not Waterproof)
Waveshare ESP32 Servo Driver Expansion Board, Built-In Wi-Fi and Bluetooth
SKU: AI0988 ₹1,532.82 (₹1,299.00 + GST)
Supply voltage: DC 6-12V(the input voltage and the servo voltage must be matched)
Controller: ESP32
Control interface: UART
Download interface: Type-C
Waveshare PL2303 USB To UART (TTL) Communication Module V2, USB-A Connector
SKU: AI2043 ₹293.82 (₹249.00 + GST)
QUICK OVERVIEW:
Add to cart
Add to Compare
-
Adopts PL2303GS new version device
-
Supports windows XP/7/8/10/11/…
- Operating Voltage(V): 3.3 to 5
- No. of Pins: 4
Yellow Electronic Building Blocks Big Key Button Module High Level Output
SKU: AI3082
QUICK OVERVIEW:
- Interface: Standard electronic block (GND, VCC, SIG)
- Working voltage: 2-5.5VDC
- Working Current: 0.55mA(MAX)
- Output: digital level (press high, release low)
- Great for DIY projects
Stereo Wireless Speaker Bluetooth 4.0 Audio Receiver Module For DIY Modified Speaker
SKU: AI2606
QUICK OVERVIEW:
Add to cart
Add to Compare
- Stereo Wireless Speaker Bluetooth 4.0 Audio Receiver Module For DIY Modified Speaker has a built-in Bluetooth module.
- The antenna structure is simple.
- The power supply voltage is 3.7 ~ 5V;
- active speakers increase Bluetooth connection function. The 7PIN output interface is spacing 2.54 through a hole; The LED state port is connected with a 100-ohm
Waveshare Industrial 8-Ch Analog Output Module, 12-bit DA Conversion, Supports 8-ch Simultaneous Voltage Output DC 7~36V Wide Voltage Power Supply
SKU: AI7497 ₹2,625.50 (₹2,225.00 + GST)Quick Overview:
- Model: Waveshare Industrial 8-Ch Analog Output Module
- 12-bit DA Conversion for precise analog output
- Supports 8-ch Simultaneous Voltage Output
- Wide Voltage Power Supply: DC 7~36V
- Modbus RTU Analog Output: 8 Channels
- Output Range: 0–10V
- Industrial Grade Isolated Protection for safety and reliability
ESP8266 ESP-01 12V 4, Channels WiFi Relay, Module Things Smart, Home Remote Control, Switch
SKU: AI3148 ₹610.06 (₹517.00 + GST)- Transmission Distance(m) :400
- Relay Channel:4
- Trigger Voltage (VDC): 12
- Switching Voltage (VAC):250@10A
- Switching Voltage (VDC):30@10A
- Baud Rate:9600
5V Modbus RTU 1Channel Relay Module Input Optocoupler Isolation RS485 MCU for Arduino
SKU: AI3819 ₹317.42 (₹269.00 + GST)Product Name:1 Bit Modbus RTU Relay Module
Working Voltage: DC 5V
Working Current:1A
Work Temperature:-25℃~85℃
Work Humidity:5%~95%RH
12V Modbus RTU 8, Channels Relay Module, Input Optocoupler, Isolation RS485 MCU
SKU: AI2968
QUICK OVERVIEW:
- Product Name:8 Bit ModbusRTU Relay Module
- MCU: One STM8S103K
- Working Voltage: DC 12 V
- Work Temperature:-25℃~85℃
- Work Humidity:5%~95%RH
Green Electronic Building Blocks Big Key Button Module High Level Output
SKU: AI2933
QUICK OVERVIEW:
- Interface: Standard electronic block (GND, VCC, SIG)
- Working voltage: 2-5.5VDC
- Working Current: 0.55mA(MAX)
- Output: digital level (press high, release low)
- Great for DIY projects
5mm Two-Color LED Module
SKU: AI2504Quick Review:
- Operating Voltage: 2.0v ~ 2.5v
- Current: 10mA
- Diameter: 5mm
- Color: Red + Green
- Beam Angle: 150
DC-DC 3A 5V-12V 24V to 12V Step-Down Power Supply Module
SKU: AI0672 ₹50.74 (₹43.00 + GST)Quick Overview:
- Product Name: DC-DC 3A 5V-12V 24V to 12V Step-down Power Supply Module
- Max Output Current:9A Max
- Conversion efficiency: can up to 97.5%
- Switch frequency: 500KHz
- Operating temperature: Industrial grade (-40 ° to + 85 °)
- Improve conversion efficiency
4 Channel 24V Relay Module Solid State Low Level SSR DC Control 250V 2A with Resistive Fuse
SKU: AI3684
Part Number: G3MB-202P
Operating Voltage: 24V
Power supply: 24VDC/160mA
Switching Voltage (VAC): 240@2A
Isolation: Phototriac
Add to cart
Add to Compare
4 Channel 24V Relay Module Solid State High Level SSR DC Control 250V 2A with Resistive Fuse
SKU: AI3686
MODEL NO: HY-M283
QUICK OVERVIEW:
Add to cart
Add to Compare
- Part Number: G3MB-202P
- Trigger Voltage (VDC):24
- Switching Voltage (VAC):240VAC~5060Hz,2A
- Isolation: Phototriac
- Zero Cross: Yes
8 Channel 5V Solid State Relay Module Board OMRON for Arduino
SKU: AI2404 ₹1,119.82 (₹949.00 + GST)
8-channel 2 AMP Solid State Relay board.
Control 8 loads of up to 2 amps each at 120 V or 240 VAC.
Good for lighting, Holiday displays etc.
With 8 Solid State Relays: 2A at 100 to 240 VAC.(50/60 Hz).
Power supply: 5 V DC (160 mA)
Trigger Current: 2mA.
Trigger Voltage: 3.3V-5V.
5V 1 Channel Bluetooth, Relay Module Things, Smart Home Remote, Control Switch
SKU: AI3149- Onboard Bluetooth status indicator and relay indicator
- With optocoupler isolation, strong anti-interference ability
- Onboard N76E003/STM8S003 and SPP-C Bluetooth 2.1 module
- Effective control distance(on open area): 10m
- Module Operating Voltage: 5VDC
- On-board 5V, 10 A / 250 v AC 10 A / 30 v DC relay, absorb 100000 times continuously.
Waveshare PCIe TO M.2 Adapter, Supports Raspberry Pi Compute Module 4
SKU: AI1569 ₹401.20 (₹340.00 + GST)- Adapter For NVMe Protocol M.2 SSD, Faster Reading/Writing, Improving Efficiency
- Supports Base Boards With PCI-E×1 / ×4 / ×8 / ×16 Socket
- Supports Raspberry Pi Compute Module 4
- Compatible With Different Sizes Of M.2 SSD
5V 2 channel USB PC Intelligent Control Relay Module
SKU: AI0842 ₹417.72 (₹354.00 + GST)
Contact type: NC / COM / NO
Input current: ≥300mA
Input voltage: DC 5V
Support Win7, XP 32-bit systems
Onboard square USB interface, stable connection.
Use imported high-performance USB control chip.
Application code: Green indicates that the relay is closed, the red disconnect
Military grade PCB board production.
Add to cart
Add to Compare
Waveshare Industrial Grade 2-Ch CAN To Ethernet Server, 2-Ch CAN + RS485 + Ethernet Port, Supports CAN Repeater / CAN To RS485, Dual SOCKET
SKU: AI7581 ₹8,848.82 (₹7,499.00 + GST)Quick Overview:
- Product Name:Waveshare Industrial Grade 2-Ch CAN To Ethernet Server
- Ethernet Port: 10/100Mbps with Auto-MDI/MDIX support
- CAN Baud Rate: 10K~1Mbps
- Power Input: 5~36V
- Supported Protocols: TCP/IP, UDP
- Operating Temperature: Industrial-grade
- Dimensions: Compact, suitable for wall-mount installation
Waveshare TTL UART to Ethernet Mini Module, Castellated Holes With Immersion Gold Design, Highly Integrated Packaging
SKU: AI7533 ₹1,296.82 (₹1,099.00 + GST)Quick Overview:
- Baudrate: 300 ~ 115200 bps
- Parity Bit: none, odd, even, mark, space
- Data Bit: 5 ~ 9 bits
- Protocol: ETHERNET, IP, TCP, UDP, HTTP, ARP, ICMP, DHCP, DNS
- Configuration Host: web browser, device management functions library
- Communication Method: TCP/IP direct communication, VCOM
Free Shipping
On orders above ₹999
COD Available
Min. order ₹250 for COD
GST Invoice
Available on all orders
1,50,000+ Orders
Delivered across India
Expert Support
Toll Free: 1800 209 0998
Product categories
- Show All Categories
- 3D Printers and Parts (379)
- Batteries, Chargers and Accessories (811)
- Clearance Sale (0)
- Development Boards (438)
- DIY Learning and Robot Kits (117)
- Drone Parts (1364)
- EBike parts (140)
- Electronic Components (783)
- Electronic Modules and Displays (1201)
- FPV Freestyle Mid/High KV Drone Motors (0)
- IoT and Wireless (544)
- Mechanical Parts and Workbench Tools (241)
- Motors & Drivers & Pumps & Actuators (583)
- Sensor Modules (639)
- Electronic Modules and Displays (1201)
- Character LCD Displays (2)
- Display modules (265)
- Electronic Modules (755)
- Audio Amplifier Module (51)
- Breakout Board (40)
- Buck Boost Voltage Regulators (158)
- Electronic Switches/Keypads Modules (49)
- LASER Module (12)
- LED Module (13)
- Logic Level Converter (6)
- Piezo Buzzer Module (7)
- Potentiometer Module (3)
- Relay Modules (175)
- RGB LED Strips and Drivers (36)
- RTC Module (16)
- Solar Panels and Controllers (8)
- USB Interface Module (160)
- Wearable Electronic (21)
- Measuring Instruments (102)
- Power Supply (62)
- Signal Generator Module & Oscilloscopes (17)