Maximum 20A current
Operating Voltage: 5V-12V
Size: 41mm*16mm*14mm
Net Weight: 13g
CSR8635 Bluetooth 4.0 Stereo Audio Receive Board Speaker Module
SKU: AI0679 ₹383.50 (₹325.00 + GST)Quick Overview
- Module own antenna, good RF distance, and consistency
- 128K EEPROM
- USB sound card function
- AUX-IN input switching function
- Support A2DP, AVRCP, HSP, HFP and other protocol frameworks
CH375B USB Disk Read-write Module USB Flash Disk For Arduino
SKU: AI3423 ₹197.06 (₹167.00 + GST)QUICK OVERVIEW:
- 2×8 connector, easy with the MCU mount.
- Jumper selectable can work in parallel or serial mode.
- On board 3.3 V LDO 1117, provides 800 mA current.
- 5 V power supply is powered by the target board.
- 12 MHZ crystal.
5V 2 Channel SSR G3MB-202P Solid State Relay Module 240V 2A Output with Resistive Fuse
SKU: AI0841 ₹169.92 (₹144.00 + GST)
2 channel 2 AMP Solid State Relay board
Control 2 loads of up to 2 amps each at 120V or 240V AC.
Good for lighting, holiday displays etc.
Input control signal voltage:
0-0.5V the state of low-level relay ON
0.5-3.3V Unknown State
3.3-5V high-level relay OFF
Operating Voltage: 5V
Operating Current: 16mA
Maximum Load: 2A @ 240VAC
CJMCU-MINI USB 5V/3.3V Socket USB DC Power Socket AMS1117 Module
SKU: AI0649 ₹76.70 (₹65.00 + GST)Quick Overview:
- Type: CJMCU MINI USB AMS1117
- MINI USB Interface Input: 5V
- MINI USB Outputs: 5V and 3.3V
- DC Power Socket Interface Input: 5V–12V
- DC Power Outlet Output (5V label): 5V and 3.3V
MINI560 DC-DC 9V 5A Step-Down Stabilized Voltage Source Module Note:SMD Resistance Marked 16C Represents 9V
SKU: AI3030 ₹62.54 (₹53.00 + GST)
Switching Frequency: 500KHz
Input Voltage: 9 Volts
Output Voltage: 5 Volts
Module Nature: Non-isolated step-down
External Dimensions: 29185.4mm (lengthwidthheight)
Color: Output 5V
Add to cart
Add to Compare
1500W DC-DC 12-48V to, 24-72V Boost Step Up Converter For Car, Laptop Solar Battery
SKU: AI2345 ₹1,593.00 (₹1,350.00 + GST)Quick Overview:
- Product Name: 1500W DC-DC 12-48V to, 24-72V Boost Step Up Converter For Car, Laptop Solar Battery
- Module model: SZ-BT07CCCV-D1
- Dimensions: 130mm x 50mm x 74mm
- Input voltage: DC10-60V
- Input current:
- 10-30V input voltage, maximum current 30A
- 31-60V input voltage, maximum current 25A
- Static working current: 15mA
- Output voltage:
- 12-90V continuously adjustable (default output is adjusted to 19V)
- 12-90V fixed output
24V Cold White 5050 SMD LED Strip-5Meter
SKU: AI2833 ₹417.72 (₹354.00 + GST)QUICK OVERVIEW:
- LED Glow Color: Cold White
- Strip Length: 5 Meter
- Operating Voltage: 24VDC
- No. of LEDs: 60LED/Meter
- Protection Level: IP20 (Not Waterproof)
XH-M229 Desktop PC ATX Power Supply Transfer Module
SKU: AI2773 ₹207.68 (₹176.00 + GST)QUICK OVERVIEW:
- Input Connector: 24 Pin ATX motherboard Connector
- Output Connector: 4* Binding Posts
- Onboard ON/OFF switch
- Fuse for each output line
8 Channel 12V Relay Module USB (PC Intelligent) Control Switch
SKU: AI1478 ₹761.10 (₹645.00 + GST)- Square onboard USB interface for connection stability
- The use of imported high-performance USB controller chip
- Use the special relay driver chip ULN2803, relay work more stable
- Military grade PCB board production
- Input voltage: DC 12 V
- Input Current: more than 300mA
- Connection : NC / COM / NO
MINI V2.1 ELM327 OBD2 Bluetooth Interface Auto Car Scanner
SKU: AI3447 ₹244.26 (₹207.00 + GST)- The newly developed wireless scan tool.
-
It supports most of the OBD-II protocols.
-
Bluetooth connection, no Batteries, Cables, or Switches.
-
Wireless (Bluetooth) 5~10 meter
-
Retrieve Fault Codes (DTCs) and clear Check Engine lights.
-
Clear trouble codes and turn off the MIL (“Check Engine” light)
- Set the maximum number of responses to obtain
TPA3110 Mono Channel Digital Amplifier Board 30W Power Amplifier Module
SKU: AI2766 ₹132.16 (₹112.00 + GST)- Amplifier Chip: TPA3110.
- Working Voltage: DC 8-26V.
- Output Power: 1 x 30W.
- Applicable Speaker Impedance: 4/6/8 ohm(8 ohms Best).
- PCB Board Size: 44 x 30 x 10 / 1.65 x 1.18in.
MAX9814 High Performance Microphone AGC Amplifier Module CMA- 4544PF-W
SKU: AI6301 ₹187.62 (₹159.00 + GST)- Supply Voltage: 2.7v-5.5v @ 3mA current
- Output: 2Vpp on 1.25V bias
- Frequency Response: 20Hz – 20 KHz
- Programmable Attack and Release Ratio
- Automatic gain, selectable max from 40dB, 50dB, or 60dB
4 CHANNEL USB QC3.0 QC2.0 DC-DC Buck Converter Charging Step Down Module 6-32V 9V 12V 24V to Fast Quick Charger Circuit Board
SKU: AI6289 ₹328.04 (₹278.00 + GST)- Input voltage: 6~32V
- Type: 6-32V DC-DC Buck Converter Step Down to Fast Quick Charger Circuit Board
- Material: Metal + Plastic
- Output voltage: default 5V, automatically adjust between 3-12V after triggering fast charge
- Output power: up to 24W (5V/3.4A, 9V/2.5A, 12V/2A, etc.)
- Output voltage cable compensation function
- Conversion efficiency: 90%-97%
5M Neon Light Dance Party Decor Light Neon LED Lamp Flexible EL Wire Rope Tube Waterproof LED Strip – Only EL Wire -BLUE
SKU: AI6281 ₹276.12 (₹234.00 + GST)- Can offer 360 degrees of illumination
- Energy-saving, long lifetime
- Wire diameter: 2 mm
- EL light length: 5M
- Lifetime: >12,000 hours
- Color: Blue
NY-D01 40A Digital Display Spot Welding Controller Board
SKU: AI2949 ₹844.88 (₹716.00 + GST)QUICK OVERVIEW:
- Material: Plastic+Metal
- The controller is compatible with 100A SCR.
- Digital control interface, you can display the current time and current settings.
- Time input 1-50, unit cycle (1 cycles is 20ms)
44 Keys RGB IR Remote Controller for 12V 5050 RGB LED Strip
SKU: AI2807 ₹132.16 (₹112.00 + GST)QUICK OVERVIEW
- Supply voltage: DC 12V
- Output current: 2 A each color
- Connecting mode: common anode
- Output: Three CMOS Drain-open Output
- Number Of buttons: 44
- Working temperature: -20℃-60℃
2 Channel 12V Relay Module Solid State High Level SSR DC Control 240V 2A with Resistive
SKU: AI3161 ₹168.74 (₹143.00 + GST)- Part Number: G3MB-202P
- Power supply:12VDC/160mA
- Switching Voltage (VAC):240@2A
- Isolation: Phototriac
CJMCU-2317 MCP23017 Serial Interface Module
SKU: AI0838 ₹285.56 (₹242.00 + GST)
16 Bit Bidirectional I/O Port.
Configurable Interrupt Output Pins
Configurable Interrupt Source.
High-Speed I2C Bus Compatible.
External Reset Input.
Low Standby Current
5V Active Alarm Buzzer Module for Arduino
SKU: AI5243 ₹44.13 (₹37.40 + GST)- Operating voltage 3.3V-5V
- PCB Dimensions: 29 (L) x 14 (W) x 12 mm (H)
- Wire length: 20cm
- Weight: 7 gm.
- Frequency: 2500Hz
64Mbit 8MByte Data Flash module SPI Interface BV/FVinter
SKU: AI1583 ₹71.98 (₹61.00 + GST)- IC: 25Q64FVSIG-1935
- Capacity: 64M-bit / 8M-byte
- Clock frequency: <104MHz
- Working voltage: 2.7V ~ 3.6V
- Current: 4mA
- Dimensions (LxWxH): 15.5 x 14.5 x 3.7 mm
MINI560 DC-DC 3.3V 5A Step-Down Stabilized Voltage Source Module Note:SMD Resistance Marked 64B Represents 3.3V
SKU: AI3029 ₹62.54 (₹53.00 + GST)Input Voltage: 5V to 20V
Output Voltage: 3.3V
Maximum Output Current: 5A
Size: 30185.4mm
Switching Frequency: 500KHz
Topology: Non-isolated buck, synchronous rectification
Operating Temperature Range: -40°C to +85°C
Waveshare Solar Power Management Module, for 6V~24V Solar Panel
SKU: AI1488 ₹684.40 (₹580.00 + GST)QUICK OVERVIEW:
- Model: Waveshare Solar Power Management Module
- Solar panel input voltage : 6V~24V
- Micro USB input voltage : 5V
- Pinheader / USB output : 5V 1A
- Charging cutoff Voltage: 4.2V±1％
Waveshare RP2040-Zero Without Header
SKU: AI1559 ₹402.38 (₹341.00 + GST)- Processor: Raspberry Pi official RP2040 mini
- Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
- 264KB of SRAM, and 2MB of onboard Flash memory
- USB-C connector, keeps it up to date, easier to use
2 x 2 Matrix 4 Push Button Keyboard Module
SKU: AI3437 ₹42.36 (₹35.90 + GST)
QUICK OVERVIEW:
- 2×2 Matrix Keyboard Module with 4 buttons
- Small in size and hence Save space
- More convenient to use
- Expanded development application modules for single chip
- With 4 keys and 4 pin
TTP229 16-Way Capacitive Touch Switch Digital keypad Module
SKU: AI3419 ₹89.68 (₹76.00 + GST)
QUICK OVERVIEW:
- Working voltage: 2.4V to 5.5V
- Built-in regulator
- Two modes
- Simple 8 key mode with independent 8 Channel parallel output.
- Advanced 16 Key modes with I2C interface output.
- Modes can be selected and configured by the user.
- Adjustable sensitivity
Capacitive Touch Switch HTTM Touch Button Sensor Module-RED
SKU: AI2960 ₹75.52 (₹64.00 + GST)
QUICK OVERVIEW:
- Operating voltage: + 2.7 ~ 6V
- Working temperature: 30 ~ + 70 Celsius
- OUT pin output voltage: + 3.3V ± 0.1V
- OUT pin Maximum output current: 500mA
Capacitive Touch Switch HTTM Touch Button Sensor Module-YELLOW
SKU: AI2961 ₹64.90 (₹55.00 + GST)
QUICK OVERVIEW:
- Operating voltage: + 2.7 ~ 6V
- Working temperature: 30 ~ + 70 Celsius
- OUT pin output voltage: + 3.3V ± 0.1V
- OUT pin Maximum output current: 500mA
2 Channel USB QC3.0 QC2.0 DC-DC Buck Converter Charging Step Down Module 6-32V 9V 12V 24V to Fast Quick Charger Circuit Board
SKU: AI5915 ₹205.32 (₹174.00 + GST)- Two channels, allowing you to simultaneously charge two USB devices.
- Supports Quick Charge 3.0 (QC3.0) and Quick Charge 2.0 (QC2.0) standards.
- Accepts input voltages in the range of 6-32V. This flexibility allows the module to be used in various applications with different power sources, such as automotive systems (12V), power adapters, or other DC power supplies.
LilyPad LED Normal Green Color(1pcs)
SKU: AI4108 ₹15.69 (₹13.30 + GST)Type: LilyPad LED
Color: Green
Quantity: 1 piece
Attachment: Snap-apart design
Integration: Large sew tabs for easy sewing into fabric
2 x 18650 Lithium Battery Shield for Arduino,ESP32 ,ESP8266
SKU: AI3452 ₹374.06 (₹317.00 + GST)QUICK OVERVIEW:
- Provides Multiple Output
- Good-Quality Construction
- Supports two 18650 Li-ion cells
- Dual Outputs 5V 3A; 3V 1A
Reed Switch Module
SKU: AI2586 ₹47.91 (₹40.60 + GST)QUICK OVERVIEW:
- Working voltage 3.3V-5
- Output format: digital switching output (0 and 1)A
- fixed bolt holes for easy installation
W5100 Ethernet Module Ethernet Network Module for Arduino
SKU: AI0256 ₹912.14 (₹773.00 + GST)Quick Overview
- Support Hardwired TCP/IP Protocols: TCP, UDP, ICMP, IPv4 ARP, IGMP, PPPoE, Ethernet
- 10BaseT/100BaseTX Ethernet PHY embedded
- Auto-Negotiation (Full-duplex and half duplex)
- Support Auto MDI/MDIX
- Simultaneously Supports to 4 independent sockets
- 0.18 µm CMOS technology
- 3.3V operation with 5V I/O signal tolerance
- 8. Provide Serial Peripheral Interface (SPI MODE 0, 3) support
Dual Display 3A DC-DC 5-23V To 0-16.5V Step Down Power Supply Buck Converter Adjustable LCD Step- down Voltage Regulator Without Case
SKU: AI6242 ₹559.32 (₹474.00 + GST)- Input voltage: 5-23V.
- Converter Type: DC-DC.
- Quantity: 1pc.
- Display Accuracy: 1%.
- Module Size: 62*44*18 mm.
5V 16 Channel Relay Module with Light Coupling LM2596S Power Supply
SKU: AI5291 ₹547.52 (₹464.00 + GST)- 5V relay with AC contact capacity of 10A 250V and optocoupler protection.
- Onboard power supply module does not need an external power supply. I / O port driver is active low.
- The module can be used as a microcontroller development board module and also as appliance control, PLC extended output.
- It is using the industry’s top -quality isolation optocouplers, strong anti-jamming ability, stable performance.
- The 1-16 road can be any full on/off or any road.
- All interfaces can be directly connected through the terminal leads, very convenient.
Type-c USB 90 degree angle conversion adapter
SKU: AI4387 ₹95.55 (₹91.00 + GST)This is a 90-degree Angled extension USB Type-C connector.
It is useful for outputting the flight controller connector in case it is difficult to access
USB: Type C
Dimensions: 21x9x12mm
Momentary Tactile Push Button Module DC 5V Switch
SKU: AI2539 ₹30.44 (₹25.80 + GST)
Operating Voltage: 5V
Contact Resistance : 50mΩ max (initial)
Electrically Life:100,000 cycles
Environment temperature: -25°C to +105°C
Operating Force: 180/230(±20gf)
Seal temperature:250ºC-280ºC
I/O pins: 3 pins
DC-DC DC8-55V to 3.3V 2A Step Down Buck Module Regulated Power Supply Module 2A High Current Circuit Board
SKU: AI2451 ₹185.26 (₹157.00 + GST)QUICK OVERVIEW:
- Model type: DC-DC Step Down Power Supply Module
- Size: 26 x 17.2mm
- Input voltage: 8-55V
- Output voltage: 3.3V
- Dissipation Power: 2A
8 Road/Channel Relay Module (with light coupling) 24V
SKU: AI2405 ₹377.60 (₹320.00 + GST)QUICK OVERVIEW:
- Operating Voltage: 24V DC
- Equipped with high-current relay [email protected] / [email protected]
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- LED Status indicators to indicate the relay ON/OFF status
- Mounting holes provided
LilyPad Buzzer
SKU: AI0731 ₹64.90 (₹55.00 + GST)QUICK OVERVIEW
- Wearable e-textile technology.
- Available Various input, output, power, and sensor boards.
- Washable
1 Channel 3-24V Relay Module Solid State Low Level SSR DC Control DC with Resistive Fuse
SKU: AI2969 ₹125.08 (₹106.00 + GST)QUICK OVERVIEW:
- Part Number: H3MB-052D
- Power supply: 3-24VDC/160mA
- Trigger Voltage (VDC): 3-24 VDC
- Switching Voltage (VDC): 50@2A
- Isolation: Phototriac
Waveshare Industrial Modbus RTU 8-Channel Relay Module RS485 Bus, Multi Protection
SKU: AI0825 ₹2,765.92 (₹2,344.00 + GST)
Power supply voltage: 5V
Communication interface: RS485
Relay channels: 8
Contact form: 1NO 1NC
Communication protocol: Standard Modbus RTU protocol
Red Electronic Building Blocks Big Key Button Module High Level Output
SKU: AI3081 ₹22.89 (₹19.40 + GST)
QUICK OVERVIEW:
- Product: Red Electronic Building Blocks Big Key Button Module High Level Output
- Interface: Standard electronic block (GND, VCC, SIG)
- Working voltage: 2-5.5VDC
- Working Current: 0.55mA(MAX)
- Output: digital level (press high, release low)
- Great for DIY projects
DC-DC 5A Step-Down Constant Voltage Constant Current MPPT
SKU: AI3860 ₹506.22 (₹429.00 + GST)QUICK OVERVIEW:
- DIY a voltage Regulator, with constant current function, Short-circuit proof, can protect the load.
- It can power supply for electronic devices.
- For a variety of battery charge, can observe the state of charge.
- charger for all kinds of batteries, with MPPT function, can enhance the charging current to double. With a constant current and prevents battery overcharge, effective protection of the battery.
- it can support high-power LED.
- As a car power supply , it can for your cell phone or digital products supply.
12V 8 Channel Relay Module
SKU: AI0336 ₹349.28 (₹296.00 + GST)Quick Overview:
- Using high-current relay, AC250V 10A DC30V 10A.
- Contact some independent wiring, safe and reliable.
- The standard interface can be extended to a variety of development boards.
- With fixed screw holes for easy installation.
- Suitable for a variety of platforms such as 8051/AVR/AVR/ARM.
2 Channel Relay Module 30A with Optocoupler Isolation 12V Supports High and Low Triger （with Guide Rail）
SKU: AI4134 ₹464.92 (₹394.00 + GST)Supply Voltage: DC 12V
Quiescent Current: 5mA
Maximum Operating Current: 190mA
Trigger Mode: High and low-level trigger
Load Voltage: DC 30V / AC 250
Load Current: 30A
Relay Life: more than 100,000 times
24V RGB 5050 SMD LED Strip- 5Meter
SKU: AI2834 ₹494.42 (₹419.00 + GST)QUICK OVERVIEW:
- LED Glow Color: RGB
- Strip Length: 5 Meter
- Operating Voltage: 24V DC
- Strip width: 10 mm
- No. of LEDs: 60LED/Meter
- Protection Level: IP20 (Not Waterproof)
USB Input QC2.0/3.0 Decoy Module Boost Trigger Motherboard 9V 12V 20V Adjustable Power Supply
SKU: AI3062 ₹188.80 (₹160.00 + GST)Product name: PD2.0/3.0 decoy
Input voltage: DC 5V
Output voltage: 5V>9V>12V>15V>20V
Maximum output voltage: 20v
Maximum output current: 5A
Working temperature: -25 ℃ ~ 85 ℃
Working humidity: 5% ~ 95% RH
Waveshare RS485 to Ethernet Converter
SKU: AI0803 ₹2,619.60 (₹2,220.00 + GST)
Communication rate: 10/100Mbps
Baudrate: 600bps~230.4Kbps
Power supply: 5.0~7.0V (EU plug)
Operating current: 150mA (@5V)
Power consumption: <1W
DC5-12V PWM Power controler Remote Control Relay Model Remote Switch lamp PWM With LED Display
SKU: AI4403 ₹367.50 (₹350.00 + GST)
ESP8266 ESP-01 12V 1 Channel WiFi Relay Module Things Smart Home Remote Control Switch
SKU: AI4136 ₹337.48 (₹286.00 + GST)
Quick Overview: ESP8266 ESP-01 12V 1 Channel WiFi Relay Module Things Smart Home Remote Control Switch
Add to cart
Add to Compare
- Diode effusion protection
- Short response time
- Onboard Relay:12V,10A/250V AC 10A/30V DC relay
- Transmission distance : 400m (max)
- Operating Voltage:12 V
- Baud Rate: 9600
Type-C Input QC2.0/3.0 Decoy Module Boost Trigger Motherboard 9V 12V 20V Adjustable Power Supply
SKU: AI3060 ₹206.50 (₹175.00 + GST)- Product name: Type-C Input QC2.0/3.0 Decoy Module
- Input voltage: DC 5V
- Output voltage: 5V>9V>12V>15V>20V
- Maximum output voltage: 20v
- Maximum output current: 5A
- Working temperature: -25 ℃ ~ 85 ℃
- Working humidity: 5% ~ 95% RH
USB Type-B Female Head to DIP 4 pin Breakout PCB Module
SKU: AI2634 ₹17.11 (₹14.50 + GST)QUICK OVERVIEW:
- Connector Type: USB Type -B
- Compatible Devices: Printer Dev. Board etc
- PCB Size: 20 x 20 mm
- Weight: 4gm
LM7806 6V DC / AC, Three Terminal Voltage, Regulator Power
SKU: AI2524 ₹88.50 (₹75.00 + GST)
QUICK OVERVIEW:
- Input Voltage: 9-24V DC/AC
- Output Voltage: 6V DC
- Max Current: 1.2A
Serial DB9 RS232/485 9 pin Terminal Female Nut
SKU: AI3864 ₹70.80 (₹60.00 + GST)
Brings all 9 pins of a DB9 connector to screw terminal blocks
Adapter used for communication debug
9 pcs signal line was all lead out, name and number clearly labeled;
All-copper DR9 seat, anti-oxidation, better contact;
Military board, three anti-paint sprays an entire board, corrosion-resistant;
Terminal spacing 3.96MM, screw hole diameter 2MM, need to use a width of 2MM screwdriver for assembly;
Use of environmentally friendly copper terminals, through IS0-9001.
Add to cart
Add to Compare
CJMCU-4051 74HC4051 8 Channel Analog Multiplexer/Demultiplexer Breakout Board for Arduino
SKU: AI3436 ₹70.80 (₹60.00 + GST)QUICK OVERVIEW:
- Wide Analog Input Voltage Range: +/-5V
- Low “ON” Resistance: 80 ohm (type) at Vcc = 4.5V; 70 ohm (type) at Vcc = 6.0V; 60 ohm (type) at Vcc=9.0V
- Logic Level Translation: to enable 5V to communicate with +/-5V analog signals
- Board Size: 30 x 19 mm
2 Channel Relay Module 30A with Optocoupler Isolation 5V Supports High and Low Triger (with Guide Rail）
SKU: AI4133 ₹403.56 (₹342.00 + GST)Supply Voltage: DC 5V
Quiescent Current: 5mA
Maximum Operating Current: 190mA
Trigger Mode: High and low-level trigger
Load Voltage: DC 30V / AC250
Load Current: 30A
Relay Life: more than 100,000 times
Black Electronic Building Blocks Big Key Button Module High Level Output
SKU: AI2938 ₹18.64 (₹15.80 + GST)QUICK OVERVIEW:
- Interface: Standard electronic block (GND, VCC, SIG)
- Working voltage: 2-5.5VDC
- Working Current: 0.55mA(MAX)
- Output: digital level (press high, release low)
- Great for DIY projects
LM2577 3A DC-DC Step UP LED Voltmeter 3-34 to 4-35V Adjustable Boost Converter Module
SKU: AI1014 ₹282.02 (₹239.00 + GST)
Input voltage range : 3-34V DC
Output voltage range : 4-35v DC adjustable
Output current:3A
Voltmeter range:0 to 40V,error +-0.1v
Multiple output regulator.
One button to switch input and output voltage display.
Power-down memory function.
Press the button for 3 seconds can turn OFF/ON the LED display.
USB Adapter Board Male To Female Adapter Micro USB/Type-C Interface 4P 2.54mm
SKU: AI6346 ₹56.64 (₹48.00 + GST)- Product Number: XY-USB4
- Voltage: 5VDC
- Temperature range: -20℃ ~ 85℃
- Working Humidity range:0%-95%RH
- 2.54 mm – 4P (VCC/D-/D+/GND)
- It is stable.
- Multiple interfaces
Waveshare Industrial Grade Isolated RS232 to RS485 Converter (With Power Adapter)
SKU: AI6116 ₹2,236.10 (₹1,895.00 + GST)QUICK OVERVIEW:
- Product type: industrial-grade isolated converter
- Baudrate: 300-921600bps
- Device port: RS232/RS485 standard complaint
- 1200m transmission distance of RS485
- 15m transmission distance of RS232
Waveshare PL2303 USB UART Board (Type C), USB To UART (TTL) Communication Module, USB-C Connector
SKU: AI1563 ₹300.90 (₹255.00 + GST)- Adopts PL2303GS new version device
- Supports windows XP/7/8/10/11/
- 3x LED indicators: TXD, RXD, PWR
Waveshare Industrial RS232/RS485 to Ethernet Converter (EU)
SKU: AI1544 ₹5,134.18 (₹4,351.00 + GST)
Communication rate: 10/100Mbps
Baudrate: 600bps~230.4Kbps
Power supply: 5.0~36.0V
Operating current: 86.5mA (@5V)
Power consumption: <1W
Add to cart
Add to Compare
Mini SD Card MP3 Sound Module For PIC Arduino WTV020-SD
SKU: AI0725 ₹126.26 (₹107.00 + GST)Supports FAT file system SD carrier
Supports playing of 4Bit ADCPM format files
Recognize the voice files automatically
Support microprocessor and key control
Audio output: 16bitDAC and PWM
Maximum voice storage: 512 voice
Operating voltage: DC 2.6 to 3.6V
Quiescent current: 16 μA (SD card is not inserted)
10000W Original Chips Thyristor Super Power Electronic Regulator can Change Light Speed and Temperature
SKU: AI3907 ₹1,031.32 (₹874.00 + GST)QUICK OVERVIEW:
- Use voltage: AC 220V
- Maximum power: 10000W resistive load limit power, room temperature is recommended for 5000W for a long time
- Voltage regulation: 0-100% (220 volts, 100-level adjustment, non-linear)
- It is suitable for water heater heat transfer, lighting dimming, small motor speed, electric iron thermostat
- It can be used in large appliances with an electric power of less than 10,000 watts.
Stainless Steel 1m Conductive Thread Wire for Wearable Lilypad (Pack of 5)
SKU: AI3352 ₹198.24 (₹168.00 + GST)QUICK OVERVIEW:
- Material: 12UM Stainless steel fiber
- Gram Weight: 0.2458g/m
- Strength: 2.8KGF.
- Length: 1m.
- Diameter(mm): 0.12.
- Resistance (Ω/m) : 27.
- 12m per spool (on plastic spools).
Piezo Buzzer 23mm
SKU: AI3583 ₹10.74 (₹9.10 + GST)QUICK OVERVIEW:
- Plate Diameter: 23mm
- Plate Material: Brass Resonant
- Frequency (kHz): 6.3 +/- .6kHz
24V 8 Channel Relay Module
SKU: AI3213 ₹416.54 (₹353.00 + GST)QUICK OVERVIEW:
- Header connector for connecting power and trigger voltage.
- LED on each channel indicates relay status.
- Screw terminal connector for easy relay output and aux power connection.
Solar Energy Step-down and Step-up Module Red
SKU: AI3543 ₹261.96 (₹222.00 + GST)QUICK OVERVIEW:
Output Current: 12V to 5V maximum 2A (output other voltage, calculated by 15W current, formula 15 / output voltage = output current)
Output Power: maximum 15W (such as high temperature please strengthen the heat)
80W DC10-35 to 1-35V Automatic Voltage Up and Down Voltage Stabilized Constant Current Power Supply Module
SKU: AI3844 ₹549.88 (₹466.00 + GST)QUICK OVERVIEW:
- Input voltage : DC 10 – 35 V
- Output Voltage : DC 1-35 V(Adjustable)
- Output Current : 8.5A(MAX)
- Input current : 12A (MAX) ( heatsink will be necessary for over 6A)
- Output Power : natural cooling 80W (MAX)
- Conversion efficiency : 90.5% Max (14V to 12V 2A)
- Ripple and Noise : 200mVp-p
- No-load current : 6mA typical
- Voltage regulation : ± 0.5%
- Load regulation : ± 0.5%
- Dynamic response speed : 300uS
4 Channel 5V Relay Module Solid State High Level SSR DC Control 250V 2A with Resistive
SKU: AI3163 ₹365.80 (₹310.00 + GST)- Part Number: G3MB-202P
- Power supply:5VDC/160mA
- Trigger Voltage (VDC):5
- Switching Voltage (VAC):240@2A
- Isolation: Phototriac
WS2812B 5V Addressable RGB IP67 Waterproof LED Strip – 5m
SKU: AI2573 ₹2,767.10 (₹2,345.00 + GST)
QUICK OVERVIEW:
- 5m total length.
- 60 LEDs/m.
- 24-bit color control (8-bit PWM per channel).
- 16.8 million colors per pixel.
- The one-wire digital control interface.
- Each RGB LED draws approximately 50 mA at 5 V with red, green, and blue at full brightness.
- Waterproof.
Waveshare UART TTL to Ethernet Converter
SKU: AI1545 ₹1,322.78 (₹1,121.00 + GST)M0 series 32-bit ARM processor
Protection: built-in 1.5KV electromagnetic isolation
Interface: 3.3V TTL
Supported protocols: IP, TCP, UDP, ARP, ICMP, DHCP, DNS, HTTPD Client
Support DHCP, DNS, AUTO MDI/MDIX, User-defined MAC address
Provide(socket), VB, C++, Delphi, Android, IOS
DC 12V Bluetooth 4 Channels Relay Module, Internet Smart Remote, Control Mobile Phone, Switch Wireless Relay
SKU: AI3152 ₹689.12 (₹584.00 + GST)Effective Control Distance (on open area): 10m
Operating Voltage: 12VDC
Relay Type: 12V, 10A / 250V AC, 10A / 30V DC
Relay Endurance: 100,000 cycles continuously
Waveshare CP2102 USB UART Board (Type C), USB To UART (TTL) Communication Module, USB-C Connector
SKU: AI1574 ₹475.54 (₹403.00 + GST)- Supports Mac OS, Linux, Android, WinCE, Windows 7/8/10/11…
- Voltage output support: 5V or 3.3V
- Integrated USB protection device: SP0503
- 3x LED indicators: TXD LED, RDX LED, POWER LED
- Pins accessible on pinheaders: TXD, RXD, RTS, CTS
USB2.0 Audio Video Capture Card Adapter VHS To DVD Video Capture Converter
SKU: AI4293 ₹355.18 (₹301.00 + GST)USB2.0 Audio Video Capture Card Adapter VHS To DVD Video Capture Converter
24V 4 Channel Relay Module
SKU: AI3212 ₹182.90 (₹155.00 + GST)QUICK OVERVIEW
- Header Connector for connecting power and trigger voltage.
- LED on each channel indicates relay status.
- Power Battery Terminal (PBT) for easy relay output and aux power connection.
12V Relay Module with Automatic Delay Timer
SKU: AI2781 ₹428.34 (₹363.00 + GST)QUICK OVERVIEW:
- Operating Voltage: 12VDC
- Output Capacity: Can Control the Load within DC 30V 5A or AC 220V 5A
- Working Current: 50mA
24V 6 channel with light coupling relay
SKU: AI2398 ₹280.84 (₹238.00 + GST)
2V relay with AC contact capacity of 10A 250V and optocoupler protection.
The onboard power supply module does not need an external power supply. I / O port driver is active low.
The module can be used as a microcontroller development board module and also as appliance control, PLC extended output.
It is using the industry’s top-quality isolation optocouplers, strong anti-jamming ability, stable performance.
The 1-16 road can be any full-on/off or any road.
All interfaces can be directly connected through the terminal leads, very convenient.
Full Color LED Module / RGB V2 Light Water for Arduino
SKU: AI1089 ₹92.04 (₹78.00 + GST)Good PRINT PACK design, very beautiful.
8 worlds of the three primary colors (red-green-blue) LED color, scanning control mode.
Applicable for various platforms, such as 51 / AVR / AVR / ARM / for Arduino All kinds of platforms.
PCF8563 RTC Board For Raspberry Pi Real Time Clock Module-Blue
SKU: AI0949 ₹253.70 (₹215.00 + GST)
Model: PCF8563
Weight : 3 gm.
I2C pin header,
3.3V battery.
Dimensions : 61 x 16 x 11 mm (LxWxH).
Free Shipping
On orders above ₹999
COD Available
Min. order ₹250 for COD
GST Invoice
Available on all orders
1,50,000+ Orders
Delivered across India
Expert Support
Toll Free: 1800 209 0998
Product categories
- Show All Categories
- 3D Printers and Parts (379)
- Batteries, Chargers and Accessories (811)
- Clearance Sale (0)
- Development Boards (438)
- DIY Learning and Robot Kits (117)
- Drone Parts (1364)
- EBike parts (140)
- Electronic Components (783)
- Electronic Modules and Displays (1201)
- FPV Freestyle Mid/High KV Drone Motors (0)
- IoT and Wireless (544)
- Mechanical Parts and Workbench Tools (241)
- Motors & Drivers & Pumps & Actuators (583)
- Sensor Modules (639)
- Electronic Modules and Displays (1201)
- Character LCD Displays (2)
- Display modules (265)
- Electronic Modules (755)
- Audio Amplifier Module (51)
- Breakout Board (40)
- Buck Boost Voltage Regulators (158)
- Electronic Switches/Keypads Modules (49)
- LASER Module (12)
- LED Module (13)
- Logic Level Converter (6)
- Piezo Buzzer Module (7)
- Potentiometer Module (3)
- Relay Modules (175)
- RGB LED Strips and Drivers (36)
- RTC Module (16)
- Solar Panels and Controllers (8)
- USB Interface Module (160)
- Wearable Electronic (21)
- Measuring Instruments (102)
- Power Supply (62)
- Signal Generator Module & Oscilloscopes (17)