-
Processor: RP2040
-
SRAM: 264KB
-
Flash Memory: 16MB
-
Compact Form Factor
-
GPIO Pins
QUICK OVERVIEW:
5V (The max current depends on your USB port, usually 500mA)
3.3V (Using LDO, 300mA MAX)
Use CH340G with stable performance.
Driver: 1. CH340G USB to UART driver.
Quick Overview:
Quick Overview:
16-Pin PCIe for easy Pi 5 integration
40-Pin GPIO for HATs
PoE for power and network in one cable
5V & 12V Outputs for up to 4.5A (25W max)
Operating Voltage: 2.5-5.25 V
Operating Temperature:20~70 °C
Material: Plastic.
Application: Electronic Circuits.
Dimensions: 28 x 22 x 8 (LxWxH) mm
Weight: 2 gm
Quick Overview:
Quick Overview:
POWER INPUT: 37 V ~ 57 V DC in
POWER OUTPUT: 12 V 2.1 A DC out
NETWORK STANDARD: supports IEEE 802.3af/at PoE
DIMENSIONS: 21 × 92 mm
Operating Voltage: 5VDC
Onboard Bluetooth status indicator and relay indicator
With 2 optocoupler isolation, strong anti-interference ability
Onboard N76E003/STM8S003 and SPP-C Bluetooth 2.1 module
Effective control distance(on open area): 10m
On-board 5V, 10 A / 250 v AC 10 A / 30 v DC relay, absorb 100000 times continuously.
Quick Overview:
Waveshare Rail-Mount Serial Server
Brand: Waveshare
Run voltage: DC 5-36V
Wireless standard: 802.11 b/g/n
Frequency range: 2.412 GHz-2.484 GHz
Support RS485 to Wifi/Ethernet communication
Rich indicator LED: Power, link, RXD, TXD
NVMe Protocol Support
High-speed Reading/Writing
Raspberry Pi Compute Module 4 Compatibility
Operating voltage: 3.3V-5V
RS232 transceiver: SP3232EEN
Communication bus: UART
Baudrate: 300~912600bps
Processor: RP2040
SRAM: 264KB
Flash Memory: 16MB
Compact Form Factor
GPIO Pins
Input voltage: 4V-35V.
Output voltage: 1.25-30V.
Output current: 3A (MAX)
Minimum pressure: 1.5V
Output current: rated current 2A, 3A maximum.
Output Power: 15W maximum.
It’s efficient up to 93%
It can source a good amount of current
The maximum output current: 2A
Input voltage: 2V-24V DC
The maximum output voltage: 5V-28V DC
1 channel relay board
Operating Voltage 5V
Max Current: 20mA
Relay Contact Current Capacity at AC250V: 10A.
Relay Contact Current Capacity at DC5V: 10A
Power supply indicator lamp
Control indicator lamp
Triode drive, increasing relay coil
Input Voltage: 220V AC.
Maximum Power: 2000W.
Adjustable Voltage: 50-220V AC.
AC frequency: 50-60Hz.
Size(LxWxH): Approx 38.1x 35 x 26.3 mm.
Working voltage: AC85-265V
Shell size: 37.2*27.5mm
Load power: <40W
Sensing distance: 3-5m
Induction angle: 120 degrees
Delay time: 30s
Input Supply voltage (V) : 7 ~ 40
Output voltage (V) : Continuously adjustable (1.25 ~ 35)
Output Current (A) : 8A (10A maximum)
Conversion efficiency: : 95%
Operating frequency (KHz) : 300
No-load current : Typical 20mA
Load regulation : 1%
Voltage Regulation: 1%
On-board MAX485 chip, A low power consumption for the RS-485 communication, slew-rate limited transceiver.
A low power consumption for the RS-485 communication
Onboard then 5.08 (mm) pitch 2P terminal to facilitate RS-485 communication wiring.
Slew-rate limited transceiver
All pins of the chip have been lead to can be controlled through the microcontroller.
Convenient RS-485 communication wiring
Multiple Units can be connected to the same RS-485 bus wiring.
All Chip pins are brought out for proper controls
QUICK OVERVIEW
Input Voltage: 12V
Connector: 5.5mm DC Jack
Output power on/off switch
Two-row multiple pin outputs, easy to use and connect
2V to 6V operation
“On” resistance: 70 Ohms @ 4.5V
6ns break-before-make @ 4.5V
Wide operating temperature range: -55C to 125C
Quick Overview
Operating voltage 3.3V-5V
PCB Dimensions: 29 (L) x 14 (W) x 12 mm (H)
Wire length: 20cm
Weight: 7 gm.
Frequency: 2500Hz
QUICK OVERVIEW
Low price
Small size (49.5mm x 19.4mm) and lightweight
Easy PCB mounting
Good consistency
Widely acclaimed.
Fully compliant USB 2.0 standard, backward compatible with USB1.1
Support System: Windows XP, Vista, Windows 7, Linux, MacOS, and WinCE5.0 drive
Baud Rate Range: 75bps – 115200bps, up to 6Mbps
Supports Plug, Play and hot-swap ( USB side)
Better than using CH341D chip or similar chip to support the laptop USB port.
Communication distance up to 1.2KM
Supports FAT file system SD carrier
Supports playing of 4Bit ADCPM format files
Recognize the voice files automatically
Support microprocessor and key control
Audio output: 16bitDAC and PWM
On orders above ₹999
Min. order ₹250 for COD
Available on all orders
Delivered across India
Toll Free: 1800 209 0998