This is the 24V variant of the 4 Channel 24V Relay Module Solid State Low Level SSR DC Control 250V 2A with Resistive Fuse in Relay Modules. Available at Original price was: ₹531.00.₹379.96Current price is: ₹379.96. (₹322.00 + GST) with free shipping across India.
Looking for 24v Module 24v? 4 Channel 24V Relay Module Solid State Low Level SSR DC Control 250V 2A with Resistive Fuse is available at Zbotic with fast shipping across India.
This is 4 Channel 24V Solid State Relay Module. A solid-state relay (SSR) is just what it sounds like; an IC that acts like a mechanical relay. They allow you to control high-voltage AC loads from lower voltage DC control circuitry. They accomplish this by using infrared light as the ‘contact,’ a solid-state relay is really just an IR LED and a photo Triac sealed up into a little box. Solid-state relays have several advantages over mechanical relays.
When the input logic voltage is applied to the coil, the NC will disconnect from the COM breaking the conductivity between the two. At the same time, the NO will connect with the COM allowing conductivity between them. Depending on your wiring this will turn on or off the connected load.
Input Parts :
- DC+: connected to VCC (Supply power according to relay voltage)
- DC-: connected to GND
- DC+: connect power positive
- DC-: connect power negative
- CH1: relay module signal trigger point (Effective low-level trigger)
- CH2: relay module signal trigger point (Effective low-level trigger)
- CH3: relay module signal trigger point (Effective low-level trigger)
- CH4: relay module signal trigger point (Effective low-level trigger)
Features:
- 4-channel 2 AMP Solid State Relay board.
- Control 4 loads of up to 2 amps each at 240 V AC.
- Good for lighting, Holiday displays, etc.
- Has been assembled, and the electrical test passed.
- Led indicator for each relay.
- Use it to control various appliances and other equipment with a large current.
- It can be controlled directly by a Microcontroller
Specification:
| Part Number | G3MB-202P |
|---|---|
| Power supply | 24VDC/160mA |
| Switching Voltage (VAC) | 240@2A |
| Isolation | Phototriac |
| Zero Cross | Yes |
| Shipping Weight | 0.039 kg |
| Shipping Dimensions | 8 × 6 × 1 cm |
Package Includes:
1 x 4 Channel 24V Relay Module Solid State Low-Level SSR DC Control 250V 2A with Resistive Fuse
About 24v Module 24v
4 Channel 24V Relay Module Solid State Low Level SSR DC Control 250V 2A with Resistive Fuse is available at Zbotic, India’s trusted electronics and robotics store. Manufactured by Generic, this product is designed for hobbyists, students, and professionals working on electronics, robotics, and DIY projects.
Product Details
- Brand: Generic
- SKU: AI3684
- Category: Uncategorized
Why Buy from Zbotic?
Zbotic offers a wide range of electronics components, development boards, sensors, and robotics parts. All products are quality-checked and shipped within 24 hours. Free shipping on qualifying orders. We offer COD (Cash on Delivery) and secure online payment options. Our customer support team is available to help with technical queries about 24v Module 24v and other products.
Applications
24v Module 24v can be used in a variety of projects including Arduino projects, Raspberry Pi builds, drone assembly, 3D printing, IoT applications, and educational experiments. Whether you are a beginner or an advanced user, this component provides the reliability and performance you need. Order your 24v Module 24v today and start building.
About 24v Module 24v
4 Channel 24V Relay Module Solid State Low Level SSR DC Control 250V 2A with Resistive Fuse is available at Zbotic, India’s trusted electronics and robotics store. Manufactured by Generic, this product is designed for hobbyists, students, and professionals working on electronics, robotics, and DIY projects.
Product Details
- Brand: Generic
- SKU: AI3684
- Category: Electronic Hobby kits
Why Buy from Zbotic?
Zbotic offers a wide range of electronics components, development boards, sensors, and robotics parts. All products are quality-checked and shipped within 24 hours. Free shipping on qualifying orders. We offer COD (Cash on Delivery) and secure online payment options. Our customer support team is available to help with technical queries about 24v Module 24v and other products.
Applications
24v Module 24v can be used in a variety of projects including Arduino projects, Raspberry Pi builds, drone assembly, 3D printing, IoT applications, and educational experiments. Whether you are a beginner or an advanced user, this component provides the reliability and performance you need. Order your 24v Module 24v today and start building.
4 Channel 24V Relay Module Solid State Low Level SSR DC Overview
The 4 Channel 24V Relay Module Solid State Low Level SSR DC Control 250V 2A with Resistive Fuse (Part Number: G3MB-202P) is a compact solid-state relay board designed to switch up to four separate AC loads from a 24V DC control signal. Ideal for industrial and automation systems, this module uses phototriac isolation to safely interface low-voltage logic with high-voltage AC devices.
Key Features of 4 Channel 24V Relay Module Solid State Low Level SSR DC
- Four independent SSR channels rated for 240VAC at 2A each
- Low-level DC control inputs requiring 24VDC/160mA per channel
- Phototriac isolation for noise immunity and safe control
- Built-in resistive fuses on each output for overcurrent protection
- Compact PCB footprint for panel or DIN-rail mounting
- Genuine G3MB-202P relays; fast shipping across India from Zbotic
Applications and Use Cases
- Switching stage and studio lighting fixtures in entertainment setups
- Controlling resistive heating elements in ovens or hot plates
- Automating fan or blower circuits in HVAC systems
- Integrating with PLCs for conveyor belt or machine cycle control
- Managing AC loads in test rigs and laboratory equipment
- Home automation projects that require 24V DC interfacing
How to Use 4 Channel 24V Relay Module Solid State Low Level SSR DC
Begin by wiring a 24V DC power supply to the module’s V+ and V– terminals, then connect each control input to your 24V logic source. Attach your AC load (up to 240VAC/2A) between the SSR output terminals and the mains supply. When a control input is driven low, the corresponding SSR channel activates, allowing current to flow through the load while the phototriac isolation maintains system safety.
Why Buy from Zbotic?
- Genuine Products: All items sourced from authorized distributors
- Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
- Free Shipping: Free delivery on qualifying orders
- COD Available: Cash on Delivery, UPI, cards, net banking
- Technical Support: Expert help for setup and troubleshooting
- Easy Returns: Hassle-free replacement for defective products
Frequently Asked Questions
Can I switch standard 230VAC appliances with this module?
Yes. Each channel is rated to switch up to 240VAC at 2A, making it suitable for most small resistive appliances like lamps, heaters, and fans.
How do I interface the control inputs with a 24V PLC?
Simply wire each PLC output to the corresponding input terminal of the SSR module and tie the PLC’s 24VDC common to the module’s V–. Driving the PLC output low will activate the relay channel.
Does the module protect against short circuits or overloads?
Each output channel includes a resistive fuse that trips in case of overcurrent, adding a layer of protection to both the module and your connected load.
Home Assistant Integration: ESP32 Sensor with ESPHome
Integrating a Home Assistant ESP32 sensor using ESPHome is the most beginner-friendly way to build a fully functional,...
Read More →
IoT Dashboard Design: Best Practices for Data Display
Table of Contents Principles of IoT Dashboard Design Choosing the Right Dashboard Platform Essential Widgets for Sensor Data...
Read More →
ESP32 NTP Time Sync: Get Accurate Time Without RTC Module
ESP32 NTP time sync is one of the most practical features you can add to any IoT project....
Read More →Technical Specifications
| Voltage Range | 24V - 250V |
|---|---|
| Current Rating | 2A |
| Channels | 4-channel |
| SKU | AI3684 |
| Weight | 0.0494 kg |
| Availability | In Stock |
Applications & Use Cases
The 4 Channel 24V Relay Module Solid State Low Level SSR DC Control 250V 2A with Resistive Fuse is a versatile relay modules used across a wide range of applications including home automation, industrial control, IoT projects, Arduino/Raspberry Pi interfacing, and motor control.
Common use cases:
- Switching high-voltage AC appliances with a microcontroller
- Building a smart home relay board
- Automating irrigation pumps in agriculture
This product is ideal for electronics engineers, IoT developers, and automation hobbyists.
Technical Tip: Use optocoupler-isolated relay modules to protect your microcontroller. Match relay coil voltage to your MCU logic level (3.3V or 5V).
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
Nakul Banerjee (verified owner) –
Outstanding quality! This 4 Channel 24V Relay Module Solid has been running 24/7 for months without a single failure.
Suresh Rao (verified owner) –
Love this 4 Channel 24V Relay Module Solid. Click sound is satisfying and switching is instantaneous.
Himanshu Bajaj –
Excellent 4 Channel 24V Relay Module Solid! Switching is clean and reliable. Using it for home automation.
Ojas Deshpande (verified owner) –
Decent 4 Channel 24V Relay Module Solid. Trigger voltage is compatible with both 3.3V and 5V logic.
Tanya Shah (verified owner) –
Excellent 4 Channel 24V Relay Module Solid! Switching is clean and reliable. Using it for home automation.
Ayush Naidu (verified owner) –
This 4 Channel 24V Relay Module Solid is robust and well built. PCB quality is excellent.
Kunal Panchal (verified owner) –
Decent 4 Channel 24V Relay Module Solid. Trigger voltage is compatible with both 3.3V and 5V logic.
Divyansh Dubey –
Nice 4 Channel 24V Relay Module Solid. Relay clicks are clear. Terminal connections are solid.
Prateek Sen (verified owner) –
Superb 4 Channel 24V Relay Module Solid! Using it to control my garden irrigation system. Very dependable.
Anjali Bajaj (verified owner) –
Good 4 Channel 24V Relay Module Solid. Works well. LED indicators are helpful for debugging.
Gauri Panchal (verified owner) –
This 4 Channel 24V Relay Module Solid is robust and well built. PCB quality is excellent.
Tejas Dubey (verified owner) –
Good 4 Channel 24V Relay Module Solid. Works well. LED indicators are helpful for debugging.
Suresh Deshpande (verified owner) –
Average 4 Channel 24V Relay Module Solid. Works but the relay generates some EMI. Added snubber to fix.
Tejas Khanna (verified owner) –
Perfect 4 Channel 24V Relay Module Solid for my IoT project. Controlling appliances remotely works flawlessly.
Tanmay Saxena (verified owner) –
Great 4 Channel 24V Relay Module Solid. Easy to integrate with NodeMCU for WiFi-based control.
Sarika Tandon (verified owner) –
Very satisfied. My smart home system runs on these 4 Channel 24V Relay Module Solid modules. Totally reliable.
Aryan Chatterjee (verified owner) –
Nice 4 Channel 24V Relay Module Solid. Relay clicks are clear. Terminal connections are solid.
Milan Dhillon –
Perfect 4 Channel 24V Relay Module Solid for my IoT project. Controlling appliances remotely works flawlessly.