Buy relay modules online in India at Zbotic. Our extensive relay module range includes 1, 2, 4, 8, and 16-channel relay boards in 5V and 12V trigger versions, with optocoupler isolation. Available in mechanical relay and solid-state relay (SSR) configurations for switching AC and DC loads up to 30A. These modules let your microcontroller safely control high-power devices like motors, lights, fans, and appliances.
ZMPT101B 2mA AC Single Phase Voltage Transformer Sensor Relay
SKU: AI0684Low price
Small size (49.5mm x 19.4mm) and lightweight
Easy PCB mounting
Good consistency
Widely acclaimed.
NE555 Delay Timer Switch Adjustable 5V Relay Module
SKU: AI0170 ₹102.66 (₹87.00 + GST)
NE555 Delay Timer Switch Adjustable 5V Relay Module Introducing the NE555 Delay Timer Switch Adjustable 5V Relay Module, your go-to...
Add to cart
Add to Compare
36W 3A Short Distance IR Hand Sweep ON-OFF Sensor Module
SKU: AI0666Operating voltage: 12vDC
Output Voltage: 12 V
Output type: Double output
Detection range: adjustable 10-80 MM
Max Power Load: 36 W
Delayed off time: none
Field of application: DC, constant pressure
Load current: 3A optional
Standby current: 10mA
Airfly 5V Single Channel Relay Module (Made In India)
SKU: AI0532 ₹35.40 (₹30.00 + GST)Quick Overview
- 1 channel relay board
- Operating Voltage 5V
- Max Current : 20mA
- Relay Contact Current Capacity at AC250V: 10A
- Relay Contact Current Capacity at DC5V: 10A
1 Channel Relay Module, 30A with Optocoupler, Isolation 12V Supports, High and Low Triger
SKU: AI2962
QUICK OVERVIEW
- Channel: 1 channel
- Relay Voltage: 12V
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
6-20V 1-Channel Power Relay Module with Adjustable Timing Cycle
SKU: AI2788 ₹142.78 (₹121.00 + GST)QUICK OVERVIEW:
- Operating voltage: 6-20V
- Time interval:0.1 s (minimum) ~ 999 min (maximum) continuously adjustable.
- Optocoupler Isolation.
5V 8 Channel Relay Module
SKU: AI0054 ₹274.94 (₹233.00 + GST)Quick Overview :
- Product Name: 5V 8 Channel Relay Module
- Channel: 8 channel
- Relay Operating Voltage: 5V
- Power supply and relay instructions, lit, disconnect is off;
- Input signal, signal, common Terminal and start conducting;
- Input signal, signal, common Terminal and start conducting;
- Useful for appliance control;
- DC or AC signal, control, you can control the 220V AC load;
- There is a normally open and one normally close contact;
- The module is compliant with international safety standards, control and load areas isolation trenches.
5V Double Channel Relay Module (Made In India)
SKU: AI0531 ₹82.60 (₹70.00 + GST)Quick Overview
- High current relay, AC250V 10A, DC5V 10A
- 2 LEDs to indicate when relays are on
- Works with logic level signals from 3.3V or 5V devices
- Opto isolation circuitry
FR120N MosEFT control Module Replacement Relay
SKU: AI1535- Model: FR120N
- MOS tube: 100V 9.4A
- Dimensions: 33mm X 17mm
- Mounting Holes Diameter: 2mm
- Compatible with MCU and control board, 3V or 5V signal.
- High-level start, low-level stop, PWM speed regulation.
4 Road/Channel Relay Module 12V (with light coupling)
SKU: AI0323 ₹258.42 (₹219.00 + GST)Quick Overview:
- Operating Voltage: 12V DC
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc.
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- LED Status indicators to indicate the relay ON/OFF status
- Mounting holes provided
1 Channel 5V Relay Module Solid State High Level SSR DC Control 250V 2A with Resistive Fuse
SKU: AI2970 ₹134.52 (₹114.00 + GST)QUICK OVERVIEW;
- Part Number: G3MB-202P
- Power supply:5VDC/160mA
- Switching Voltage (VAC):240@2A
- Isolation: Phototriac
5V 16 Channel Relay Module with Light Coupling LM2596S Power Supply
SKU: AI5291 ₹506.22 (₹429.00 + GST)- 5V relay with AC contact capacity of 10A 250V and optocoupler protection.
- Onboard power supply module does not need an external power supply. I / O port driver is active low.
- The module can be used as a microcontroller development board module and also as appliance control, PLC extended output.
- It is using the industry’s top -quality isolation optocouplers, strong anti-jamming ability, stable performance.
- The 1-16 road can be any full on/off or any road.
- All interfaces can be directly connected through the terminal leads, very convenient.
10A RC TX Controlled Relay Switch PWM Receiver
SKU: AI1255 ₹413.70 (₹394.00 + GST)- RX lead length:100mm
- Power in/out lead length:100mm (each)
- Switching load current (DC):10A (Continuous current)
- Input Voltage (DC):5-28V
2 Channel 12V Relay Module Solid State High Level SSR DC Control 240V 2A with Resistive
SKU: AI3161- Part Number: G3MB-202P
- Power supply:12VDC/160mA
- Switching Voltage (VAC):240@2A
- Isolation: Phototriac
12V 8 Channel Relay Module
SKU: AI0336 ₹352.82 (₹299.00 + GST)Quick Overview:
- Using high-current relay, AC250V 10A DC30V 10A.
- Contact some independent wiring, safe and reliable.
- The standard interface can be extended to a variety of development boards.
- With fixed screw holes for easy installation.
- Suitable for a variety of platforms such as 8051/AVR/AVR/ARM.
2 Channel Relay Module 30A with Optocoupler Isolation 12V Supports High and Low Triger （with Guide Rail）
SKU: AI4134
Supply Voltage: DC 12V
Quiescent Current: 5mA
Maximum Operating Current: 190mA
Trigger Mode: High and low-level trigger
Load Voltage: DC 30V / AC 250
Load Current: 30A
Relay Life: more than 100,000 times
Add to cart
Add to Compare
5V 8 Channels Relay Module High and Low, Triggering Optocoupler, Isolation Relay Module, PLC Signal Amplifier, Board
SKU: AI3253 ₹1,463.20 (₹1,240.00 + GST)
QUICK OVERVIEW:
- Trigger Voltage :5
- Switching Voltage (VAC) :10A 277VAC
- Switching Voltage :12A 125VAC
DC 12V Bluetooth 4 Channels Relay Module, Internet Smart Remote, Control Mobile Phone, Switch Wireless Relay
SKU: AI3152Effective Control Distance (on open area): 10m
Operating Voltage: 12VDC
Relay Type: 12V, 10A / 250V AC, 10A / 30V DC
Relay Endurance: 100,000 cycles continuously
24V 8 Channel Relay Module
SKU: AI3213 ₹416.54 (₹353.00 + GST)QUICK OVERVIEW:
- Header connector for connecting power and trigger voltage.
- LED on each channel indicates relay status.
- Screw terminal connector for easy relay output and aux power connection.
12V Relay Module with Automatic Delay Timer
SKU: AI2781 ₹428.34 (₹363.00 + GST)QUICK OVERVIEW:
- Operating Voltage: 12VDC
- Output Capacity: Can Control the Load within DC 30V 5A or AC 220V 5A
- Working Current: 50mA
5V/7-28V ESP8266 WIFI 8 Channel Relay Module ESP-12F Development Board
SKU: AI3251 ₹1,341.66 (₹1,137.00 + GST)QUICK OVERVIEW:
- Board size: 149*80mm
- Weight: 140g
- Power supply mode supports DC7-28V/5V
- Onboard WIFI module RST reset button
- 4M Byte Flash
24V 6 channel with light coupling relay
SKU: AI2398 ₹280.84 (₹238.00 + GST)
2V relay with AC contact capacity of 10A 250V and optocoupler protection.
The onboard power supply module does not need an external power supply. I / O port driver is active low.
The module can be used as a microcontroller development board module and also as appliance control, PLC extended output.
It is using the industry’s top-quality isolation optocouplers, strong anti-jamming ability, stable performance.
The 1-16 road can be any full-on/off or any road.
All interfaces can be directly connected through the terminal leads, very convenient.
2 Channel 3-24V Relay Module Solid State Low Level SSR DC Control DC with Resistive Fuse
SKU: AI3157- Part Number: H3MB-052D
- Power supply:3-24VDC/160mA
- Trigger Voltage (VDC):3-24 VDC
- Switching Voltage (VAC):50@2A
- Isolation: Phototriac
5V Modbus RTU 1Channel Relay Module Input Optocoupler Isolation RS485 MCU for Arduino
SKU: AI3819 ₹317.42 (₹269.00 + GST)Product Name:1 Bit Modbus RTU Relay Module
Working Voltage: DC 5V
Working Current:1A
Work Temperature:-25℃~85℃
Work Humidity:5%~95%RH
12V Modbus RTU 8, Channels Relay Module, Input Optocoupler, Isolation RS485 MCU
SKU: AI2968
QUICK OVERVIEW:
- Product Name:8 Bit ModbusRTU Relay Module
- MCU: One STM8S103K
- Working Voltage: DC 12 V
- Work Temperature:-25℃~85℃
- Work Humidity:5%~95%RH
4 Channel 24V Relay Module Solid State High Level SSR DC Control 250V 2A with Resistive Fuse
SKU: AI3686
MODEL NO: HY-M283
QUICK OVERVIEW:
Add to cart
Add to Compare
- Part Number: G3MB-202P
- Trigger Voltage (VDC):24
- Switching Voltage (VAC):240VAC~5060Hz,2A
- Isolation: Phototriac
- Zero Cross: Yes
8 Channel 5V Solid State Relay Module Board OMRON for Arduino
SKU: AI2404 ₹1,274.40 (₹1,080.00 + GST)
8-channel 2 AMP Solid State Relay board.
Control 8 loads of up to 2 amps each at 120 V or 240 VAC.
Good for lighting, Holiday displays etc.
With 8 Solid State Relays: 2A at 100 to 240 VAC.(50/60 Hz).
Power supply: 5 V DC (160 mA)
Trigger Current: 2mA.
Trigger Voltage: 3.3V-5V.
12V 2 Channel Low Level Relay Module Without Light Coupling
SKU: AI4160Default Relay trigger Setting : Low-Level
Logic Input (V) : 3.3 ~ 5
Trigger Voltage (VDC) : 12
Switching Voltage (VAC) : 250@10A
Switching Voltage (VDC) : 30@10A
8 Channel 3-24V Relay Module Solid State Low Level SSR DC Control DC with Resistive Fuse
SKU: AI3166 ₹1,310.98 (₹1,111.00 + GST)
Part Number: H3MB-052D
Power supply:3-24VDC/160mA
Switching Voltage (VAC):50@2A
Isolation: Phototriac
5V 1 Channel Bluetooth, Relay Module Things, Smart Home Remote, Control Switch
SKU: AI3149- Onboard Bluetooth status indicator and relay indicator
- With optocoupler isolation, strong anti-interference ability
- Onboard N76E003/STM8S003 and SPP-C Bluetooth 2.1 module
- Effective control distance(on open area): 10m
- Module Operating Voltage: 5VDC
- On-board 5V, 10 A / 250 v AC 10 A / 30 v DC relay, absorb 100000 times continuously.
Songle Single-Channel 24V 30A Relay Module Power Failure Relay High Level
SKU: AI3674 ₹193.52 (₹164.00 + GST)Quick Overview:
- Product Name : Songle Single-Channel 24V 30A Relay Module Power Failure Relay High Level
- Trigger Voltage: 24VDC
- Switching Voltage: 250VAC@30A; 30VDC@30A
- Trigger current : 5mA
- Optical coupling isolation, driving ability is strong, stable performance
4 Channel 24V Relay Module Solid State Low Level SSR DC Control 250V 2A with Resistive Fuse
SKU: AI3684
Part Number: G3MB-202P
Operating Voltage: 24V
Power supply: 24VDC/160mA
Switching Voltage (VAC): 240@2A
Isolation: Phototriac
Add to cart
Add to Compare
DC 5V Bluetooth 4 Channels Relay Module Internet Smart Remote Control Mobile Phone Switch Wireless Relay Module
SKU: AI3679 ₹767.00 (₹650.00 + GST)
QUICK OVERVIEW:
Add to cart
Add to Compare
- Onboard Bluetooth status indicator and relay indicator
- With 4 optocoupler isolation, strong anti-interference ability
- Onboard N76E003/STM8S003 and SPP-C Bluetooth 2.1 module
- Effective control distance(on open area): 10m
- Module Operating Voltage: 5VDC
5V Modbus RTU 2Channels Relay Module Input Optocoupler, Isolation RS485 MCU
SKU: AI3321 ₹352.82 (₹299.00 + GST)QUICK OVERVIEW:
- This is a relay module with two channels that supports Modbus RTU protocol. It operates on a 5V DC power supply and has a current rating of 1A. It can work in temperatures ranging from -25℃ to 85℃ and humidity levels from 5% to 95% RH.
12 Channel 12V Relay Module (without light coupling)
SKU: AI3841 ₹1,572.94 (₹1,333.00 + GST)- Number of Channels: 12
- Relay Type: Normally Open (NO) interfaces
- Maximum Load:
- AC: 250V/10A
- DC: 30V/10A
- Optocouplers: Top-quality ultra-compact two-way isolation optocouplers
- Trigger Current: 3mA
- Operating Voltage: 12V
- Control Compatibility: Microcontroller (8051, AVR, PIC, DSP, ARM, MSP430, TTL logic)
- Driver Current: 15-20mA per channel
- Relay Type: High-current relay
5V 4 Channel SSR Solid State Relay Module 240V 2A Output with Resistive Fuse
SKU: AI0910
Has been assembled, and electrical test passed.
Led indicator for each relay.
Operating Voltage: 5V
Operating Current: 12.5mA
Maximum Load: 2A @ 240VAC
Waveshare Industrial Modbus RTU 4-ch Relay Module with RS485 Interface, Industrial Grade Rail-Mount Case
SKU: AI7721 ₹4,364.82 (₹3,699.00 + GST)Quick overview:
-
Address Configurable (1~255)
-
Flash-On/Off Relay Control
-
Wide Voltage Input (7V~36V)
-
Isolated Power Supply
AC220V ESP8266 Wireless WIFI Relay Module 1 Channel ESP-12S Wifi Development Board
SKU: AI4222
Model: LC-Relay-ESP12-1R-MV
Work Voltage: AC90-250V/DC7-12V/USB5V.
WIFI IC: ESP8266
Communication Protocol:UART
Load current:10A(Max)
Add to cart
Add to Compare
6 Channel 5V Relay Module Solid State High Level SSR DC Control 250V 2A with Resistive Fuse
SKU: AI3690
Part Number: G3MB-202P
Working current(mA):12.5
Trigger Current (mA):2
Trigger Voltage (VDC):5
Switching Voltage (VAC):50\60@2A
Max. Load:2A @240V AC
Add to cart
Add to Compare
4 Channel 12V Relay Module Solid State High Level SSR DC Control 250V 2A with Resistive Fuse
SKU: AI3685
Part Number: G3MB-202P
Power supply:12 VDC/160mA
Trigger Voltage (VDC):6-12
Switching Voltage (VAC):240@2A
Isolation: Phototriac
Add to cart
Add to Compare
12V 1 Channel Relay Module Double-Ended Terminal
SKU: AI3840
QUICK OVERVIEW:
Add to cart
Add to Compare
- 1Single-channel Thermal Relay Control Sensor Module Temperature Switch 12V Specifications: - Use thermistor to sense the environmental temperature, nterface Maximum load: AC 0V-250V/10A, DC0V-30V/10A - Use potentiometer to adjust sensitivity - Intelligent adjust design - temperature range - 20℃...
2 Channel 5V Relay Module Solid State High Level SSR DC Control 250V 2A with Resistive Fuse
SKU: AI3160- Part Number: G3MB-202P
- Power supply:5VDC/160mA
- Trigger Voltage (VDC):5
- Switching Voltage (VAC):240@2A
- Isolation: Phototriac
8 Channel 24V Relay Module Solid State Low Level SSR DC Control 250V 2A with Resistive Fuse
SKU: AI4141 ₹1,028.96 (₹872.00 + GST)
Part Number: G3MB-202P
Working current(mA):12.5
Trigger Current (mA):2
Trigger Voltage (VDC):25
Switching Voltage (VAC):240@2A
Max. Load:2A @240V AC
Add to cart
Add to Compare
6 Channel 24V Relay Module Solid State High Level SSR DC Control 250V 2A with Resistive Fuse
SKU: AI3692
Part Number: G3MB-202P
Power supply: 24VDC/160mA
Trigger Voltage (VDC): 24
Switching Voltage (VAC): 240@2A
Isolation: Phototriac
Add to cart
Add to Compare
8 Channel 12V Relay Module Solid State High Level SSR DC Control 250V 2A with Resistive Fuse
SKU: AI3693 ₹755.20 (₹640.00 + GST)
Part Number: G3MB-202P
Power supply:12VDC/160mA
Trigger Voltage (VDC):12
Switching Voltage (VAC):240@2A
Isolation: Phototriac
8 Channel 12V Relay Module Solid State Low Level SSR DC Control 240V 2A with Resistive Fuse
SKU: AI4140 ₹784.70 (₹665.00 + GST)
Part Number: G3MB-202P
Working current(mA):12.5
Trigger Current (mA):2
Trigger Voltage (VDC):12
Switching Voltage (VAC):240@2A
Max. Load:2A @250V AC
Add to cart
Add to Compare
6 Channel 5V Relay Module Solid State Low Level SSR DC Control 250V 2A with Resistive
SKU: AI3165- Part Number: G3MB-202P
- Working current(mA):12.5
- Trigger Current (mA):2
- Trigger Voltage (VDC):5
- Switching Voltage (VAC):240@2A
- Max. Load:2A @240V AC
DC 5V Bluetooth 2 Channels Relay Module Internet Smart Remote Control Mobile Phone Switch Wireless Relay Module
SKU: AI4137 ₹566.40 (₹480.00 + GST)Operating Voltage: 5VDC
Onboard Bluetooth status indicator and relay indicator
With 2 optocoupler isolation, strong anti-interference ability
Onboard N76E003/STM8S003 and SPP-C Bluetooth 2.1 module
Effective control distance(on open area): 10m
On-board 5V, 10 A / 250 v AC 10 A / 30 v DC relay, absorb 100000 times continuously.
6 Channel 24V Relay Module Solid State Low Level SSR DC Control 250V 2A with Resistive Fuse
SKU: AI3688 ₹612.42 (₹519.00 + GST)
Has been assembled, and the electrical test passed.
Led indicator for each relay.
Use it to control various appliances and other equipment with a large current.
It can be controlled directly by a Microcontroller
Input control signal voltage:
0-2.5V status low level, relay OFF
3-5V status high level, relay ON
Add to cart
Add to Compare
6 Channel 12V Relay Module Solid State High Level SSR DC Control 250V 2A with Resistive Fuse
SKU: AI3691
Part Number: G3MB-202P
Power supply:12VDC/160mA
Trigger Voltage (VDC):12
Switching Voltage (VAC):240@2A
Isolation: Phototriac
6 Channel 12V Relay Module Solid State Low Level SSR DC Control 250V 2A with Resistive Fuse
SKU: AI3687 ₹637.20 (₹540.00 + GST)
Part Number: G3MB-202P
Working current(mA):12.5
Trigger Current (mA):2
Trigger Voltage (VDC):5
Switching Voltage (VAC):240@2A
Max. Load:2A @240V AC
Add to cart
Add to Compare
5V/7-28V 8 Channels Bluetooth Relay Module Development Board
SKU: AI3765
DC7-28V/5V
4M Byte Flash
Board size: 148*79.8mm
Weight: 140g
Add to cart
Add to Compare
5V 1 Channel Relay Module
SKU: AI0018 ₹53.10 (₹45.00 + GST)
1 channel relay board
Operating Voltage 5V
Max Current: 20mA
Relay Contact Current Capacity at AC250V: 10A.
Relay Contact Current Capacity at DC5V: 10A
Power supply indicator lamp
Control indicator lamp
Triode drive, increasing relay coil
Add to Compare
6-30V 1-Channel Power Relay Module with Adjustable Timing Cycle
SKU: AI0096 ₹102.66 (₹87.00 + GST)
QUICK OVERVIEW
Add to Compare
- Operating voltage: 6-30V
- Time interval:0.1 s (minimum) ~ 999 min (maximum) continuously adjustable.
- Trigger Signal Source: High-Level Trigger (3.0 V-24 V)
- Output Capacity: can control no more than DC 30V 5A AC or 220 V devices 5A
- Optocoupler Isolation.
DC 12V Relay with Adjustable Delay Time Signal Triggering Switch Module
SKU: AI0321 ₹116.82 (₹99.00 + GST)Quick Overview:
- Module based on: NE555 chip.
- Precision Pulse Generation / Timing.
- Adjustable Duty Cycle.
- Monostable Operation.
- Standby no power consumption
- Countless Application and Information Sources.
- Time can be adjusted by a potentiometer, the default is 0-25 seconds.
- Module supplies a diode with an anti-power reverse connection.
NE555 Time Delay Monostable Switch Module 12V
SKU: AI0088 ₹54.28 (₹46.00 + GST)
Module based on the NE555 chip.
Input voltage: DC 12V
Adjustable time: 0-10 s
AC Control voltage: 250V/max. 10A
DC Control Voltage: 30V/max. 10A
Max. load: 2200W
Add to Compare
5V 4 Channel Relay Module
SKU: AI0066 ₹153.40 (₹130.00 + GST)Quick Overview:
- Product Name : 5V 4 Channel Relay Module
- 5V 4-Channel Relay interface board and each one needs 15-20mA Driver Current.
- Equipped with high-current relay, AC250V 10A; DC30V 10A.
- Standard interface that can be controlled directly by microcontroller (for Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
- Indication LED’s for Relay output status.
5V 2 Channel Relay Module
SKU: AI0084 ₹83.78 (₹71.00 + GST)Quick Overview
- 2 Channels
- Maximum switching voltage: 250VAC / 30VDC
- Maximum switching current: 10A
- Each relay features an LED indicator.
- Dimensions: 51 x 39 x 18mm (Length x Width x Height)
Timing Delay Switch Circuit with Double MOSFET Control
SKU: AI2753 ₹129.80 (₹110.00 + GST)Wide voltage power supply (6~30V)
supports micro USB 5.0V power supply
The interface is clear and simple, powerful, easy to understand
All set parameters automatically save power.
1 channel 5V 10A Relay Control Board Module with Optocoupler
SKU: AI0902 ₹56.64 (₹48.00 + GST)
Channel: 1 channel
Relay Voltage: 5V
High impedance controller pin
Pull-down circuit for the avoidance of malfunction
One normally closed contact and one normally open contact
Triode drive, increasing relay coil
1 Road/Channel Relay Module (with light coupling) 12V
SKU: AI0832 ₹70.80 (₹60.00 + GST)
Operating Voltage: 12V DC
Equipped with high-current relay 10A@250VAC / 10A@30VDC
It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
Freewheeling diode to protect your microcontroller
Input Signal Pin connected to Burg stick for easy accessibility
LED Status indicators to indicate the relay ON/OFF status
Mounting holes provided
Add to Compare
D4184 Mosfet control Module Replacement Relay
SKU: AI2432 ₹38.47 (₹32.60 + GST)
QUICK OVERVIEW:
- Model: D4184
- MOS tube: 40V 50A
- Dimensions: 32.6mm X 16.5mm
- Mounting Holes Diameter: 2mm
- Compatible with MCU and control board, 3V or 5V signal.
- High-level start, low-level stop, PWM speed regulation.
PC817 2 CH Optocoupler Isolation Module
SKU: AI5225 ₹70.80 (₹60.00 + GST)- I/O Isolation for MCUs (Micro Controller Units)
- Noise Suppression in Switching Circuits
- Driving Port Signal Voltage: 3.6-24V
- Output Port Voltage Port: 3.6-30V
- Output Can Be Switched From Pull-Up or Pull-Down With Jumpers.
A03B 1 Road 5V Low Level Solid State Relay Module with Fuse SSR 250V 2A Fuse
SKU: AI0320 ₹94.40 (₹80.00 + GST)Trigger voltage: 5VDC
Trigger current: 2mA
Switching Voltage: 240VAC@2A
Triggering: Low-level
XH-M131 DC 12V Light Control Switch Photoresistor Relay Module
SKU: AI2770 ₹113.28 (₹96.00 + GST)QUICK OVERVIEW:
- Material – Steel, Plastic, PVC
- Power Supply – DC 12V
- Operating Current – Before the relay actuation: less than 5mA
Relay after pull-in: 5V module is less than 50mA - Switching Voltage: 250VAC@10A; 30VDC@10A
ESP8266 WiFi 5V 1 Channel Relay Module
SKU: AI0352 ₹224.20 (₹190.00 + GST)Quick Overview:
- Onboard Module: ESP8266 WiFi module; in AP mode it can connect with 5 Clients at the same time
- Operating Way:
- Cellphone connected directly to the WiFi module
- Cellphone and WiFi module connected to the same router, and use the APP to control relay
- Transmission Distance: 400m (max)
- Relay: 5V, 10A / 250V AC, 10A / 30V DC
- Baud Rate: 9600
- Diode effusion protection
- Short response time
12V Dual Channel Relay Module (with Light Coupling)
SKU: AI0335 ₹93.22 (₹79.00 + GST)Operating Voltage: 12V DC
Two separate LEDs for On/Off indication of the Relay
Triggering input voltage 3.3V – 5V 4)
Back EMF protection
Equipped with high-current relay 10A@250VAC / 10A@30VDC
It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
Freewheeling diode to protect your microcontroller
Input Signal Pin connected to Burg stick for easy accessibility
Mounting holes provided
PC817 4 CH Optocoupler Isolation Module
SKU: AI5214 ₹109.74 (₹93.00 + GST)- I/O Isolation for MCUs (Micro Controller Units)
- Noise Suppression in Switching Circuits
- Driving Port Signal Voltage: 3.6-24V
- Output Port Voltage Port: 3.6-30V
- Output Can Be Switched From Pull-Up or Pull-Down With Jumpers.
1 channel 5V 30A Relay Module Power Failure Relay
SKU: AI0663 ₹141.60 (₹120.00 + GST)Quick Overview
- Trigger Voltage: 5VDC
- Switching Voltage: 250VAC@30A; 30VDC@30A
- The module can be set high level or low-level trigger by the jumper
24V 4-Channel Relay Module (with Light Coupling)
SKU: AI0322 ₹180.54 (₹153.00 + GST)Operating Voltage: 24V DC
Two separate LEDs for On/Off indication of the Relay
Triggering input voltage 3.3V – 5V 4)
Back EMF protection
Equipped with high-current relay 10A@250VAC / 10A@30VDC
It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
Freewheeling diode to protect your microcontroller
Input Signal Pin connected to Burg stick for easy accessibility
Mounting holes provided
1 Channel 12V 30A Relay Module with Optocoupler and Guide Rail
SKU: AI0662 ₹332.76 (₹282.00 + GST)
Channel: 1 channel
Comes with GUIDE RAIL
Relay Voltage: 12V
High impedance controller pin
Pull-down circuit for the avoidance of malfunction
One normally closed contact and one normally open contact
Triode drive, increasing relay coil
Add to Compare
LR7843 Mosfet Control Module Replacement Relay
SKU: AI1000 ₹42.72 (₹36.20 + GST)
Model: LR7843
MOS tube: 30V 161A
Dimensions: 23mm X 16mm
Mounting Holes Diameter: 2mm
Compatible with MCU and control board, 3V or 5V signal.
High-level start, low-level stop, PWM speed regulation.
Add to Compare
XH-M131 DC 24V Light Control Switch Photoresistor Relay Module
SKU: AI3136 ₹119.18 (₹101.00 + GST)- Module Name: Photosensitive Relay Module
- Module Model: XH-M131
- Input Voltage: 24 VDC
- Load capacity: 20 A
- Output Type: Output Switch
1 Channel Relay Module, 30A with Optocoupler, Isolation 24V Supports, High and Low Triger
SKU: AI3140 ₹182.90 (₹155.00 + GST)- Channel: 1 channel
- Relay Voltage: 24V
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
433MHz 5V 1 Channel Relay Module Wireless Remote Control Switch without Battery
SKU: AI0759 ₹357.54 (₹303.00 + GST)Operating voltage: DC 5V
Operating temperature: -40~80 degrees
Operating frequency: 433MHZ Receive sensitivity: ≥-95dB
Working Mode: jump switch, point action, self-locking, and interlocking(adjustable)
2 Channel Relay Module 30A with Optocoupler Isolation 5V Supports High and Low Triger
SKU: AI2963 ₹363.44 (₹308.00 + GST)
QUICK OVERVIEW:
- Supply Voltage: DC 5V
- Quiescent Current: 5mA
- Maximum Operating Current: 190mA
- Trigger Mode: High and low-level trigger
- Load Voltage: DC 30V / AC250
- Load Current: 30A
- Relay Life: more than 100,000 times
2 Channel Relay Module, 30A with Optocoupler, Isolation 12V Supports, High and Low Triger
SKU: AI2964 ₹310.34 (₹263.00 + GST)
QUICK OVERVIEW:
- Supply Voltage: DC 12V
- Quiescent Current: 5mA
- Maximum Operating Current: 190mA
- Trigger Mode: High and low-level trigger
- Load Voltage: DC 30V / AC 250
- Load Current: 30A
- Relay Life: more than 100,000 times
433MHz 12V 1 Channel Relay Module Wireless Remote Control Switch with Battery
SKU: AI0821 ₹376.42 (₹319.00 + GST)
Operating voltage: DC 12V
Operating temperature: -40~80 degrees
Operating frequency: 433MHZ Receive sensitivity: ≥-95dB
Working Mode: jump switch, point action, self-locking, and interlocking(adjustable)
Add to Compare
1 Channel Relay Module, 30A with Optocoupler, Isolation 5V Supports, High and Low Triger
SKU: AI1050 ₹187.62 (₹159.00 + GST)
Channel: 1 channel
Comes with GUIDE RAIL
Relay Voltage: 5V
High impedance controller pin
Pull-down circuit for the avoidance of malfunction
One normally closed contact and one normally open contact
Triode drive, increasing relay coil
Add to Compare
XH-M131 DC 5V Light Control Switch Photoresistor Relay Module
SKU: AI2769 ₹94.40 (₹80.00 + GST)QUICK OVERVIEW:
- Module Name: Photosensitive Relay Module
- Input Voltage: 5V DC
- Load capacity: 10A (Max)
- Output Type: Output Switch
- Control Frequency:1 MHz
Free Shipping
On orders above ₹999
COD Available
Min. order ₹250 for COD
GST Invoice
Available on all orders
1,50,000+ Orders
Delivered across India
Expert Support
Toll Free: 1800 209 0998
Product categories
- Show All Categories
- 3D Printers and Parts (379)
- Batteries, Chargers and Accessories (811)
- Clearance Sale (0)
- Development Boards (438)
- DIY Learning and Robot Kits (117)
- Drone Parts (1364)
- EBike parts (140)
- Electronic Components (783)
- Electronic Modules and Displays (1201)
- FPV Freestyle Mid/High KV Drone Motors (0)
- IoT and Wireless (544)
- Mechanical Parts and Workbench Tools (241)
- Motors & Drivers & Pumps & Actuators (583)
- Sensor Modules (639)
- Audio Amplifier Module (51)
- Breakout Board (40)
- Buck Boost Voltage Regulators (158)
- Electronic Switches/Keypads Modules (49)
- LASER Module (12)
- LED Module (13)
- Logic Level Converter (6)
- Piezo Buzzer Module (7)
- Potentiometer Module (3)
- Relay Modules (175)
- RGB LED Strips and Drivers (36)
- RTC Module (16)
- Solar Panels and Controllers (8)
- USB Interface Module (160)
- Wearable Electronic (21)
- Electronic Modules (755)