This is the 12V variant of the 6 Channel 12V Relay Module Solid State Low Level SSR DC Control 250V 2A with Resistive Fuse in Relay Modules. Available at Original price was: ₹637.20.₹605.34Current price is: ₹605.34. (₹513.00 + GST) with free shipping across India.
Looking for 12v Module 12v? 6 Channel 12V Relay Module Solid State Low Level SSR DC Control 250V 2A with Resistive Fuse is available at Zbotic with fast shipping across India.
This 12 V 6Channel SSR Solid State Relay Module 250V 2A Output with Resistive Fuse is based on the omron G3MB -202P SSR relay which can control up to 2A at 240VAC. This is a 6 Channel SSR relay module, each relay channel has 3 separate terminals, NO (Normal Open), COM (Common), NC (Normal Closed).
When the input logic voltage is applied to the coil, the NC will disconnect from the COM breaking the conductivity between the two. At the same time, the NO will connect with the COM allowing conductivity between them. Depending on your wiring this will turn on or off the connected load.
Input parts :
- DC+: connect power positive
- DC-: connect power negative
- CH1: relay module signal trigger point (Effective low-level trigger)
- CH2: relay module signal trigger point (Effective low-level trigger)
- CH3: relay module signal trigger point (Effective low-level trigger)
- CH4: relay module signal trigger point (Effective low-level trigger)
- CH5: relay module signal trigger point (Effective low-level trigger)
- CH6: relay module signal trigger point (Effective low-level trigger)
Features :
- Has been assembled, and the electrical test passed.
- Led indicator for each relay.
- Use it to control various appliances and other equipment with a large current.
- It can be controlled directly by a Microcontroller
- Input control signal voltage:
- 0-2.5V status low level, relay OFF
- 3-5V status high level, relay ON
Specification:
| Part Number | G3MB-202P |
|---|---|
| Working current(mA) | 12.5 |
| Trigger Current (mA) | 2 |
| Trigger Voltage (VDC) | 12 |
| Switching Voltage (VAC) | 5060@2A |
| Max. Load | 2A @5060V AC |
| Shipping Weight | 0.051 kg |
| Shipping Dimensions | 13 × 6 × 3 cm |
Package Includes:
1 x 6 Channel 12V Relay Module Solid State Low Level SSR DC Control 250V 2A with Resistive
About 12v Module 12v
6 Channel 12V Relay Module Solid State Low Level SSR DC Control 250V 2A with Resistive Fuse is available at Zbotic, India’s trusted electronics and robotics store. Manufactured by Generic, this product is designed for hobbyists, students, and professionals working on electronics, robotics, and DIY projects.
Product Details
- Brand: Generic
- SKU: AI3687
- Category: Uncategorized
Why Buy from Zbotic?
Zbotic offers a wide range of electronics components, development boards, sensors, and robotics parts. All products are quality-checked and shipped within 24 hours. Free shipping on qualifying orders. We offer COD (Cash on Delivery) and secure online payment options. Our customer support team is available to help with technical queries about 12v Module 12v and other products.
Applications
12v Module 12v can be used in a variety of projects including Arduino projects, Raspberry Pi builds, drone assembly, 3D printing, IoT applications, and educational experiments. Whether you are a beginner or an advanced user, this component provides the reliability and performance you need. Order your 12v Module 12v today and start building.
About 12v Module 12v
6 Channel 12V Relay Module Solid State Low Level SSR DC Control 250V 2A with Resistive Fuse is available at Zbotic, India’s trusted electronics and robotics store. Manufactured by Generic, this product is designed for hobbyists, students, and professionals working on electronics, robotics, and DIY projects.
Product Details
- Brand: Generic
- SKU: AI3687
- Category: Electronic Hobby kits
Why Buy from Zbotic?
Zbotic offers a wide range of electronics components, development boards, sensors, and robotics parts. All products are quality-checked and shipped within 24 hours. Free shipping on qualifying orders. We offer COD (Cash on Delivery) and secure online payment options. Our customer support team is available to help with technical queries about 12v Module 12v and other products.
Applications
12v Module 12v can be used in a variety of projects including Arduino projects, Raspberry Pi builds, drone assembly, 3D printing, IoT applications, and educational experiments. Whether you are a beginner or an advanced user, this component provides the reliability and performance you need. Order your 12v Module 12v today and start building.
6 Channel 12V Relay Module Solid State Low Level SSR DC Overview
The 6 Channel 12V Relay Module Solid State Low Level SSR DC Control 250V 2A is a compact board based on the Omron G3MB-202P solid state relays. Designed for low-level 5 V logic inputs and a 12 V supply, it switches AC loads up to 240 VAC at 2 A per channel with onboard resistive fuses for added protection.
Key Features of 6 Channel 12V Relay Module Solid State Low Level SSR DC
- Six independent SSR outputs, each handling up to 240 VAC at 2 A
- Low-level trigger (2 mA at 5 VDC) compatible with microcontrollers and PLCs
- Built-in resistive fuses on each channel for overload protection
- Opto-isolated control inputs ensure minimal interference with logic circuits
- Compact PCB footprint with screw terminals for NO, COM, NC connections
- Genuine Omron G3MB-202P relays for reliable switching performance
- Fast shipping across India from Zbotic’s warehouse
Applications and Use Cases
- AC lighting control in smart home or office automation systems
- Switching heating elements or fans in temperature-regulated enclosures
- Controlling small motors and pumps in laboratory or industrial setups
- Integration with Arduino, Raspberry Pi, or PLCs for prototyping
- Load shedding or power management in distributed control systems
- Timed switching of appliances in energy-saving applications
How to Use 6 Channel 12V Relay Module Solid State Low Level SSR DC
Power the module with a stable 12 V DC supply on the DC+ and DC– terminals, then feed each input pin with a 5 V logic signal (active low) to activate the corresponding relay channel. Wire your AC load between COM and NO for normally-off operation or COM and NC for normally-on operation. Verify fuse integrity before powering high-current devices.
Why Buy from Zbotic?
- Genuine Products: All items sourced from authorized distributors
- Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
- Free Shipping: Free delivery on qualifying orders
- COD Available: Cash on Delivery, UPI, cards, net banking
- Technical Support: Expert help for setup and troubleshooting
- Easy Returns: Hassle-free replacement for defective products
Frequently Asked Questions
How do I wire the input and output terminals?
Connect 12 V DC to DC+ and DC– on the module. For each channel, apply a 5 V logic low signal to the input pin to switch the relay. Wire your AC load between the COM and NO terminals for a normally open circuit.
What protection does the resistive fuse provide?
Each channel has an onboard resistive fuse that limits current during overloads or short circuits. If a fuse blows, replace it with a similar-rated component before resuming operation.
Can I switch inductive loads like motors or transformers?
Yes, the G3MB-202P SSR can handle inductive loads up to 2 A at 240 VAC. Ensure you account for startup inrush currents and consider external snubber circuits for heavy inductive applications.
IoT Dashboard with Grafana and InfluxDB on Local Network
An IoT Grafana InfluxDB dashboard is the professional way to visualise data from your ESP32 sensor nodes on...
Read More →
ESP32 Telegram Bot: Control Hardware with Chat Commands
Imagine controlling your home appliances, reading sensor data, or toggling LEDs simply by sending a message on Telegram....
Read More →
ESP32-C3 vs ESP32: Choosing the Right Variant in 2026
The ESP32-C3 vs ESP32 comparison is one of the most searched questions among Indian IoT developers and hobbyists...
Read More →Technical Specifications
| Voltage Range | 12V - 250V |
|---|---|
| Current Rating | 2A |
| Channels | 6-channel |
| SKU | AI3687 |
| Weight | 0.06955 kg |
| Availability | In Stock |
Applications & Use Cases
The 6 Channel 12V Relay Module Solid State Low Level SSR DC Control 250V 2A with Resistive Fuse is a versatile relay modules used across a wide range of applications including home automation, industrial control, IoT projects, Arduino/Raspberry Pi interfacing, and motor control.
Common use cases:
- Switching high-voltage AC appliances with a microcontroller
- Building a smart home relay board
- Automating irrigation pumps in agriculture
This product is ideal for electronics engineers, IoT developers, and automation hobbyists.
Technical Tip: Use optocoupler-isolated relay modules to protect your microcontroller. Match relay coil voltage to your MCU logic level (3.3V or 5V).
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
Vipin Krishnan (verified owner) –
Great 6 Channel 12V Relay Module Solid. Easy to integrate with NodeMCU for WiFi-based control.
Aanya Arora –
This 6 Channel 12V Relay Module Solid works perfectly with my Arduino. Easy to wire and control.
Manish Gupta (verified owner) –
Love this 6 Channel 12V Relay Module Solid. Click sound is satisfying and switching is instantaneous.
Anand Patel (verified owner) –
Excellent 6 Channel 12V Relay Module Solid! Switching is clean and reliable. Using it for home automation.
Sahil Reddy –
This 6 Channel 12V Relay Module Solid is robust and well built. PCB quality is excellent.
Simran Nayak –
Great quality 6 Channel 12V Relay Module Solid. All channels working. Optocoupler isolation is a nice feature.
Paras Ghosh (verified owner) –
Excellent 6 Channel 12V Relay Module Solid! Switching is clean and reliable. Using it for home automation.
Mahesh Rathore (verified owner) –
Great quality 6 Channel 12V Relay Module Solid. All channels working. Optocoupler isolation is a nice feature.
Ajay Kohli (verified owner) –
Love this 6 Channel 12V Relay Module Solid. Click sound is satisfying and switching is instantaneous.
Shruti Negi (verified owner) –
Excellent 6 Channel 12V Relay Module Solid! Switching is clean and reliable. Using it for home automation.
Vansh Nayak (verified owner) –
Excellent 6 Channel 12V Relay Module Solid! Switching is clean and reliable. Using it for home automation.
Kunal Dhillon (verified owner) –
Nice 6 Channel 12V Relay Module Solid. Relay clicks are clear. Terminal connections are solid.
Ankit Bisht (verified owner) –
Excellent 6 Channel 12V Relay Module Solid! Switching is clean and reliable. Using it for home automation.
Aman Goyal (verified owner) –
Great 6 Channel 12V Relay Module Solid. Easy to integrate with NodeMCU for WiFi-based control.
Aanya Choudhury (verified owner) –
Great quality 6 Channel 12V Relay Module Solid. All channels working. Optocoupler isolation is a nice feature.
Tarun Deshpande –
Good 6 Channel 12V Relay Module Solid. Works well. LED indicators are helpful for debugging.
Ojas Mishra (verified owner) –
Love this 6 Channel 12V Relay Module Solid. Click sound is satisfying and switching is instantaneous.
Chetan Gill (verified owner) –
Decent 6 Channel 12V Relay Module Solid. Trigger voltage is compatible with both 3.3V and 5V logic.
Zara Dave (verified owner) –
Very satisfied. My smart home system runs on these 6 Channel 12V Relay Module Solid modules. Totally reliable.