DHT11 Digital Relative Humidity and Temperature Sensor Module
This DHT11 Digital Relative Humidity & Temperature Sensor Module is pre-calibrated with resistive sense technology coupled with NTC thermistor, for the precise reading of the relative Humidity and surrounding temperature DHT 11 break-out board is a very popular, low-cost sensor from Aosong, the breakout provides easy installation of the DHT11 sensor module.
The board is also equipped with high- performance 8-Bit microcontroller which is connected to the DHT11 sensor module. The output of the DHT11 is in the form of a digital signal on a single data pin. The sensing update frequency is to be measured at every 2sec (0.5Hz).
The complete arrangement makes the device an ideal sensing setup to be hooked up directly to any kind of microcontroller boards like Arduino’s. The board is extra featured with onboard LED, a bypass capacitor between Vcc and Gnd and a pull-up resistor across the data line and Vcc.
The DHT-11 Digital Temperature And Humidity Sensor is a basic, ultra low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air and spits out a digital signal on the data pin (no analog input pins needed).
Its fairly simple to use, but requires careful timing to grab data. The only real downside of this sensor is you can only get new data from it once every 2 seconds, so in your code please use sensor reading interval at 2 seconds or more. Compared to the DHT22, this sensor is less precise, less accurate and works in a smaller range of temperature/humidity.
But despite its disadvantages over DHT22, it is a smaller and less expensive sensor for temperature and humidity measurement.
Application :
HVAC, Testing and inspection equipment, Automotive, Datalogger, Consumer goods, Automatic control, Weather station, Home appliances, Humidity regulator, Medical, Dehumidifier, etc.
Features:
- Low power consumption.
- DHT11 sensor adopts
- The module can detect the surrounding environment of the humidity and temperature
- High reliability and excellent long-term stability
- The output from the digital output
- Has fixed bolt hole and easy installation.
Specification:
| Temperature Measurement Accuracy(°C) | ±2.0 |
|---|---|
| Response Time(s) | <5 |
| Input Supply Voltage (VDC) | 5 |
| Breadboard Size(mm) | 19×17 (LxW) |
| Weight (g): | 0.6 |
| Shipping Weight | 0.095 kg |
| Shipping Dimensions | 4 × 4 × 1 cm |
Package Includes:
1 X DHT11 Digital Relative Humidity & Temperature Sensor Module.
Tutorial:
https://lastminuteengineers.com/dht11-module-arduino-tutorial/
Industrial 4-20mA Sensor Interface with Arduino and ESP32
The 4–20 mA current loop is the backbone of industrial process instrumentation. Developed in the 1950s and standardised...
Read More →
Build a DIY Water Quality Monitor Using pH & Turbidity Sensors
Water quality monitoring is one of the most impactful DIY electronics projects you can build. Whether you want...
Read More →
pH Sensor Module for Arduino: Buying Guide & Calibration
Table of Contents Introduction Understanding pH and Why It Matters How a pH Sensor Module Works Popular pH...
Read More →Technical Specifications
| Model | DHT11 |
|---|---|
| SKU | AI5202 |
| Weight | 0.0 kg |
| Availability | Out of Stock |
Applications & Use Cases
The DHT11 Digital Relative Humidity and Temperature Sensor Module is a versatile temperature & humidity sensor used across a wide range of applications including weather stations, greenhouse monitoring, HVAC systems, cold chain logistics, and server room monitoring.
Common use cases:
- Building a home weather station with Arduino
- Monitoring greenhouse conditions via IoT
- Alerting when server room temperature exceeds threshold
This product is ideal for IoT developers, agricultural engineers, and home automation enthusiasts.
Technical Tip: DHT22 offers better accuracy than DHT11. For precision applications, use SHT31 or BME280. Ensure adequate ventilation around the sensor.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
Swati Kumar (verified owner) –
Okay DHT11 Digital Relative Humidity and Temperature. Had to add a capacitor to stabilize readings. Works now.
Dinesh Sharma (verified owner) –
Great quality DHT11 Digital Relative Humidity and Temperature. Calibrated it easily and the accuracy is impressive.
Ishaan Bhat –
Great DHT11 Digital Relative Humidity and Temperature. Using it in my smart agriculture system. Reliable measurements every time.
Manoj Kamath (verified owner) –
Great quality DHT11 Digital Relative Humidity and Temperature. Calibrated it easily and the accuracy is impressive.
Kunal Singh (verified owner) –
Perfect DHT11 Digital Relative Humidity and Temperature for my automation project. Integrates seamlessly with my microcontroller.
Yogesh Saini (verified owner) –
Love this DHT11 Digital Relative Humidity and Temperature. Response time is fast and readings are stable.
Swati Rao –
Good DHT11 Digital Relative Humidity and Temperature. Works as described. Calibration needed some patience but results are good.
Tanvi Khurana (verified owner) –
Excellent DHT11 Digital Relative Humidity and Temperature! Readings are accurate and consistent. Perfect for my project.
Arnav Naidu –
Perfect DHT11 Digital Relative Humidity and Temperature for my automation project. Integrates seamlessly with my microcontroller.
Varun Luthra (verified owner) –
Nice DHT11 Digital Relative Humidity and Temperature. Readings are mostly accurate. Good enough for my hobby project.
Nandini Pandey –
Perfect DHT11 Digital Relative Humidity and Temperature for my automation project. Integrates seamlessly with my microcontroller.
Lakshya Kulkarni (verified owner) –
Excellent sensitivity and range on this DHT11 Digital Relative Humidity and Temperature. Works better than I expected.
Lokesh Singh (verified owner) –
Great quality DHT11 Digital Relative Humidity and Temperature. Calibrated it easily and the accuracy is impressive.
Ishaan Nayak (verified owner) –
Love this DHT11 Digital Relative Humidity and Temperature. Response time is fast and readings are stable.
Simran Kamath (verified owner) –
This DHT11 Digital Relative Humidity and Temperature works great with Arduino. Easy to wire up and code.
Himanshu Desai (verified owner) –
Perfect DHT11 Digital Relative Humidity and Temperature for my automation project. Integrates seamlessly with my microcontroller.
Naman Verma –
Great quality DHT11 Digital Relative Humidity and Temperature. Calibrated it easily and the accuracy is impressive.
Siddharth Bhat (verified owner) –
Nice DHT11 Digital Relative Humidity and Temperature. Readings are mostly accurate. Good enough for my hobby project.
Ayush Pillai –
Great quality DHT11 Digital Relative Humidity and Temperature. Calibrated it easily and the accuracy is impressive.
Nakul Saini –
Excellent sensitivity and range on this DHT11 Digital Relative Humidity and Temperature. Works better than I expected.
Mohit Sen (verified owner) –
Good DHT11 Digital Relative Humidity and Temperature. Works as described. Calibration needed some patience but results are good.
Nikhil Shetty (verified owner) –
Pretty good DHT11 Digital Relative Humidity and Temperature. Documentation could be better but the sensor itself is solid.
Ankit Mehta –
Good DHT11 Digital Relative Humidity and Temperature. Works as described. Calibration needed some patience but results are good.
Zubin Bajaj –
This DHT11 Digital Relative Humidity and Temperature works great with Arduino. Easy to wire up and code.
Dhruv Singh (verified owner) –
Very satisfied with this DHT11 Digital Relative Humidity and Temperature. Library support is good and it’s easy to interface.
Diya Chauhan –
Superb DHT11 Digital Relative Humidity and Temperature! Using it in my environmental monitoring system. Very reliable data.
Rakesh Rajan (verified owner) –
Decent DHT11 Digital Relative Humidity and Temperature for the price. Requires proper wiring but works well once set up.
Pankaj Kamath (verified owner) –
This DHT11 Digital Relative Humidity and Temperature is a must-have for sensor projects. Plug and play with Arduino.
Farhan Bose –
Excellent sensitivity and range on this DHT11 Digital Relative Humidity and Temperature. Works better than I expected.
Himanshu Saxena –
Excellent DHT11 Digital Relative Humidity and Temperature! Readings are accurate and consistent. Perfect for my project.
Urmi Dave (verified owner) –
This DHT11 Digital Relative Humidity and Temperature works great with Arduino. Easy to wire up and code.
Sonali Iyer (verified owner) –
Great quality DHT11 Digital Relative Humidity and Temperature. Calibrated it easily and the accuracy is impressive.
Tanmay Chopra –
Nice DHT11 Digital Relative Humidity and Temperature. Readings are mostly accurate. Good enough for my hobby project.