QUICK OVERVIEW
Capacity (Kg): 50.
Output Sensitivity (mv/v): 1.0±0.1.
Nonlinearity (%FS): 0.03.
Repeatability (%FS): 0.03.
Input Resistance (Ω): 1000.
Insulation Resistance (MΩ): ≥5000.
Made From High-Quality Materials.
Electronic High-Frequency Oscillations (2.4MHz).
Material: Ceramic, Wire
Diameter: Atomizer: 2cm/0.79in; Sealing ring: 2.5cm/0.98in
High sensitivity to Ammonia, Sulfide and Benzene
Stable and Long Life
Detection Range: 10 – 300 ppm NH3, 10 – 1000 ppm Benzene, 10 – 300 ppm Alcohol
Heater Voltage: 5.0V
Dimensions: 18mm Diameter, 17mm High excluding pins, Pins – 6mm High
Long life and low cost
QUICK OVERVIEW
Operating Voltage(V): 5 ~30
Current Consumption Max: 5 mA
Detection distance(mm): 5 mm.
Type of detection: Inductive.
Cable Length: 100cm.
Response Frequency: 500Hz Max.
Protection class: IP 67.
Operating voltage:( 5V DC).
Detector distance: (1CM).
Adjust the potentiometer, let the modules work normally.
Small and easy to use module.
It comes with a Buzzer for metal detection indication.
Power Supply: 3.3~5.5V DC
Output: 4-pin single row
Measurement Range: Humidity 20-90%RH, Temperature 0~50℃
Accuracy: Humidity ±5%RH, Temperature ±2℃
Resolution: Humidity 1%RH, Temperature 1℃
Interchangeability: Fully Interchangeable
Long-Term Stability: <±1%RH/year
Operating Voltage: 3.5V to 5.5V
Operating current: 0.3mA (measuring) 60uA (standby)
Output: Serial data
Temperature Range: -40°C to 80°C
Humidity Range: 0% to 100%
Resolution: Temperature and Humidity both are 16-bit
Accuracy: ±0.5°C and ±1%
QUICK OVERVIEW:
Capacity: 10KG
Rated output(MV/V): 2.0±0.15
Accuracy class: C2
Maximum number of laod cell verification intervals(N max): 2000
Minimum number of laod cell verification intervals(Vmin): EMax/5000
Combined error(%RO): <±0.030
Creep(%RO/30min): 0.03
Temperature effect on sensitivity(%RO/°C): 0.0016
Temperature effect on zero(%RO/°C): 0.003
Zero balance(%RO): 1.0
Input resistance(O): 402±6
Output resistance(O): 350±3
QUICK OVERVIEW
QUICK OVERVIEW:
The width of the optical coupling slot: 10mm
With a signal output indication.
Single signal output
The circuit board output switch!
The output valid signal is low.
LC 5A Over-current protection Sensor module uses a current transformer to collect the AC signal to achieve the relay over-current signal output within 0-5A. Relay pull while over-current, relay released while not over-current
Material: Acrylic
Dimensions: 50 x 40 x 18 (LxWxH) mm.
Weight: 8 gm
Heating voltage: 5±0.2V
Working current: 5-10mA
The detection concentration range: PH0-14
The detection range of temperature: 0-60 centigrade
The response time: ≤ 5S
Stability time: ≤ 60S
Power consumption: ≤ 0.5W
QUICK OVERVIEW
Using high-quality dual-panel design, with power indicator and TTL signal output instructions.
The switching signal having a DO (TTL) output and analog output AO.
TTL output valid signal is low.
The higher the voltage, the concentration of the analog output voltage is higher.
A hydrogen gas detection with good sensitivity.
Has a long life and reliable stability
QUICK OVERVIEW:
QUICK OVERVIEW
Power supply voltage of 2.5 V ~ 5 V
Low power consumption
Wide detection range: 240 nm to 370 nm
Wide Angle: 130 degrees
Schottky type photosensitive diode
Good linear response
High sensitivity
QUICK OVERVIEW:
QUICK OVERVIEW:
On orders above ₹999
Min. order ₹250 for COD
Available on all orders
Delivered across India
Toll Free: 1800 209 0998