Maximum 20A current
Operating Voltage: 5V-12V
Size: 41mm*16mm*14mm
Net Weight: 13g
QUICK OVERVIEW:
QUICK OVERVIEW:
2 channel 2 AMP Solid State Relay board
Control 2 loads of up to 2 amps each at 120V or 240V AC.
Good for lighting, holiday displays etc.
Input control signal voltage:
0-0.5V the state of low-level relay ON
0.5-3.3V Unknown State
3.3-5V high-level relay OFF
Operating Voltage: 5V
Operating Current: 16mA
Maximum Load: 2A @ 240VAC
QUICK OVERVIEW:
QUICK OVERVIEW:
220V to 5V 2A AC-DC Converter, Low Wave Power Supply Switch Module
Package: Module
is_customized: Yes
Operating Temperature: -40°-+85°
Dissipation Power: 10W
Supply Voltage: 5V 2A
Application: AC-DC module
Type: LilyPad LED
Color: Green
Quantity: 1 piece
Attachment: Snap-apart design
Integration: Large sew tabs for easy sewing into fabric
Applications:
1. Single phase pure sine wave inverter
2. PV Inverter
3. Wind power inverter
4. Uninterruptible Power Supply UPS System
5. Digital generator system
6. IF power
7. Single-phase motor speed controller
8. Single-phase inverter
9. Sine wave dimmer
10. Sine wave regulator
Wide Input voltage: 3.5V-35V
Output Voltage: 4-35V (Adjustable)
Output current: rated current 3A MAX ( Heat-sink Needed)
Conversion efficiency: Up to 92% (output voltage higher, the higher the efficiency)
Switching Frequency: 50KHz
Dual-Channel Stereo Output
Run-on 7V to 15V power Supply
32 Steps DC volume control has a +32dB to -75dB range.
40 pin QFN 6 x 6 mm package.
Much higher efficiency in terms of cost and performance than competitors’ ICs
Model: LCD2004
Interface: I2C
Interface Address: 0x27
Character Color: White
Backlight: Blue
Supply voltage: 5V
Dimensions(L x W x H) mm.: 98 x 60 x 14
Multipurpose Ruler Scale
Gold plated Drawing
Hard PCB material
Compaq easy to carry in the toolkit.
DC-DC DC5-30V to1.25-30V 8A Power Module with Adjustable Voltage
QUICK OVERVIEW:
QUICK OVERVIEW:
Display Size: 1.3 inches
Resolution: 128×64 pixels
Pixel Color Options: Yellow (128×16 pixels) or Blue (128×48 pixels)
Protocol Support: SPI, I2C
Operating Voltage: 3.3V – 5V
Operating Temperature: -30°C to 70°C
QUICK OVERVIEW:
QUICK OVERVIEW:
Power supply voltage: 5V
Communication interface: RS485
Relay channels: 8
Contact form: 1NO 1NC
Communication protocol: Standard Modbus RTU protocol
QUICK OVERVIEW:
QUICK OVERVIEW:
QUICK OVERVIEW
QUICK OVERVIEW:
Has been assembled, and electrical test passed.
Operating Voltage: 5V
Operating Current: 12.5mA
Maximum Load: 2A @ 240VAC
Input control signal voltage:
0-2.5V status low level, relay OFF
3-5V status high level, relay ON
Overview
All voltage input (AC: 90 ~ 264V).
Output voltage: 5 VDC.
Output Power: 2W.
Output overload and short circuit protection.
No-load loss <0.1W.
Supply Voltage: DC 5V
Quiescent Current: 5mA
Maximum Operating Current: 190mA
Trigger Mode: High and low-level trigger
Load Voltage: DC 30V / AC250
Load Current: 30A
Relay Life: more than 100,000 times
QUICK OVERVIEW:
Maximum 20A current
Operating Voltage: 5V-12V
Size: 41mm*16mm*14mm
Net Weight: 13g
QUICK OVERVIEW:
QUICK OVERVIEW:
Operating Voltage: 4.5-30 VDC
It is a 2-wire display.
LED Color: RED
Current Consumption: < 15 mA.
Accuracy: 0.1 V.
Refresh Speed: Approx 200mS/time.
Measure accurately up to 3.6 V.
Meet UL, CE requirements
Ultra-thin, ultra-small
Input Voltage Range(V): 100 ~ 240
Low ripple and low noise
Output overload and short circuit protection
High efficiency, high power density
The product is designed to meet the requirements of EMC and Safety Test
QUICK OVERVIEW:
QUICK OVERVIEW:
Overview
On orders above ₹999
Min. order ₹250 for COD
Available on all orders
Delivered across India
Toll Free: 1800 209 0998