Buy electronic modules, display screens, and measuring instruments online in India at Zbotic. Our collection includes OLED, TFT, LCD, e-Ink, and HMI displays in various sizes, along with power supply modules, signal generators, oscilloscopes, digital multimeters, voltage and current meters, and a wide range of functional electronic modules. Whether you need a display for your Arduino project, a bench power supply for your workstation, or a precision measuring instrument, find quality products at affordable prices with detailed specifications and fast shipping.
DS3231 RTC Memory Module Precise Real Time Clock I2C-AT24C32
SKU: AI0379Quick Overview
-
- Voltage Supply: 2.2 V ~ 5.5 V (for RTC).
- Time Format: HH: MM: SS (12/24 hr).
- 1 Hz output pin SQW.
- Date Format: YY-MM-DD-dd.
- DS 3231 based RTC with 2032 Battery Holder.
5V 1 Channel Relay Module
SKU: AI0018
1 channel relay board
Operating Voltage 5V
Max Current: 20mA
Relay Contact Current Capacity at AC250V: 10A.
Relay Contact Current Capacity at DC5V: 10A
Power supply indicator lamp
Control indicator lamp
Triode drive, increasing relay coil
Add to cart
Add to Compare
Frequency Adjustable Pulse Generator Module NE555
SKU: AI0165Quick Overview
- Input Voltage: 5V-15VDC
- Output amplitude: 4.2V V-PP to 11.4V V-PP.
- Output Current : 15mA for 5V & 35mA for 12V.
- Color: Blue
- Working voltage: 5-12V
- Size: 25x 13 x 12 mm (LxWxH)
- Minimum – 50% duty cycle, 3.7 Hz & Maximum – 98% duty cycle, 1.3KHz
650nm 6mm 5V DC 5mW Mini Laser Dot Diode Module
SKU: AI1401
Overview
Add to cart
Add to Compare
- Product Name: 650nm 6mm 5V DC 5mW Mini Laser Dot Diode Module
- Output Power: 5mW
- Working Voltage: 5V DC
- Working temperature: -10 ℃~＋40 ℃
- Housing material: Copper
- Working life: more than 2000 hours
- Spot mode: Dot Facula (continuous output)
- Laser wavelength: 650nm red-colored
- Operating current: <40mA
- Power lead length: 120mm
AC110-240V PIR Infrared Motion Sensor.
SKU: AI1529Working voltage: AC85-265V
Shell size: 37.2*27.5mm
Load power: <40W
Sensing distance: 3-5m
Induction angle: 120 degrees
Delay time: 30s
0.28 Inch 0-100V Three Wire DC Voltmeter
SKU: AI0349
Operating Voltage: 0-100 VDC
Measuring Voltage: 0 to 100 VDC
It is a 3-wire display.
LED Color: BLUE
Current Consumption : < 20 mA.
Accuracy: 0.1 V.
Refresh Speed : Approx. 200mS/time.
The display on Voltage: 3 V.(but not measure accurately up to 3.6V).
Add to cart
Add to Compare
RS485 to TTL Converter Module Serial Port UART Hardware Automatic Flow Control Module
SKU: AI0572Quick Overview:
- Has a 120 ohm termination resistor, shorted R0 to enable the termination resistor.
- Support multi-machine communication, allowing access at up to 128 devices on the bus.
- The module can be hot swapped, the signal does not appear dead phenomenon.
- A large area of copper to prevent interference.
- Compatible with 3.3V and 5.0V power supply.
- Compatible with 3.3V and 5.0V signal.
MP3-TF-16P MP3 SD Card Module with Serial Port
SKU: AI0569Supports sampling rates (KHz): 8 / 11.025 / 12/16 / 22.05 / 24/32 / 44.1 / 48
24-bit DAC output, dynamic range support: 90dB, SNR support: 85dB
Fully supports FAT16, FAT32 file system
Maximum support 32G TF card
Support U disk to 32G, 64M bytes of NORFLASH
MAX485 TTL to RS485 Converter Module
SKU: AI0571
On-board MAX485 chip, A low power consumption for the RS-485 communication, slew-rate limited transceiver.
A low power consumption for the RS-485 communication
Onboard then 5.08 (mm) pitch 2P terminal to facilitate RS-485 communication wiring.
Slew-rate limited transceiver
All pins of the chip have been lead to can be controlled through the microcontroller.
Convenient RS-485 communication wiring
Multiple Units can be connected to the same RS-485 bus wiring.
All Chip pins are brought out for proper controls
Add to cart
Add to Compare
CD74HP4067 High Speed CMOS 16-Channel Analog/Digital Multiplexer Breakout Module
SKU: AI0149
2V to 6V operation
“On” resistance: 70 Ohms @ 4.5V
6ns break-before-make @ 4.5V
Wide operating temperature range: -55C to 125C
Add to cart
Add to Compare
12V 3A Touch Sensor Switch for Mirror Light
SKU: AI0680Quick Overview
- Output Line : 3 Line 150mm
- Input Line : Double Line 300mm
- Voltage : 12V
- Function : White Warm Two-Color Infinite Dimming
Type-C USB 5V 2A Step-Up Boost Converter with USB Charger
SKU: AI1130
Input voltage range: 5-5.5V
Charging cut-off voltage: (4.2V/4.35V) ±0.5%:
Charging current: 2.4A±5%
Boost output voltage: 5V5.15V (wire loss compensation)
Boost output voltage ripple: 100mV
Add to cart
Add to Compare
MP 1584 DC-DC 3A Adjustable Buck Module
SKU: AI0498Input Voltage: 4.5V – 28V
Output Voltage: 0.8V – 20V
Output Voltage Adjustment: On-board potentiometer
Output Current: 1.8A (typical), 3.0A (max).
Ceramic Capacitor Stable
Internal Soft-Start
Internally Set Current Limit without a Current Sensing Resistor
0.28″ Digital Voltmeter (0-100V) and Ammeter (10 A) Dual LED Voltage Current Measurement Module
SKU: AI0348Quick Overview:
- Display color: Red & Blue LED (dual display).
- Display: 0.28″ LED digital.
- Operating voltage: DC 4.5 ~ 30V.
- Measure voltage: DC 0 ~ 100V.
- Minimum resolution (V): 0.1V.
- Refresh rate: ≥500ms / times.
- Measure accuracy: 1% (± 1 digit).
- Minimum resolution (A): 0.01A.
- Operating Current: <20mA.
- Measure current: 10A (direct measurement, built-in shunt).
- Operating temperature: -10 to 65°c.
- Operating Humidity: 10 to 80% (non-condensing).
- Mounting cutout: 45.5mm x 26.5mm.
DS1307 RTC I2C Module AT24C32 without Battery
SKU: AI0106Interface: Two-wire I2C
Output Pin: 1Hz
Memory: 56 bytes non-volatile RAM
Battery: LIR2032 (included)
Operating Voltage: Standard 3V lithium cell (2V to 3.5V)
Package Options: 8-pin DIP or SOIC
Operating Temperature: Suitable for various environments
Dimensions: Compact and space-saving design
High Current Active Alarm Buzzer Driver Module
SKU: AI0112
Operating voltage 3.3V-5V
PCB Dimensions: 29 (L) x 14 (W) x 12 mm (H)
Wire length: 20cm
Weight: 7 gm.
Frequency: 2500Hz
Add to cart
Add to Compare
TM1637 4 Bits Digital Tube LED Display Module with Clock Display(Red)
SKU: AI0107Quick Ovceview
- Driver Chip: MAX7219
- Input Voltage: 3.7 to 5.3 V
- Input Current: 30 mA
LM386 Audio Amplifier Module
SKU: AI0604Onboard LM386 Chip.
200 multiplier benefits circuit design.
On-board speaker wiring Block.
On-board 10K variable resistor, you can adjust the volume of the enlarged.
Onboard Power Indicator.
ZMPT101B 2mA AC Single Phase Voltage Transformer Sensor Relay
SKU: AI0684Low price
Small size (49.5mm x 19.4mm) and lightweight
Easy PCB mounting
Good consistency
Widely acclaimed.
0.96 Inch I2C/IIC 4pin OLED Display Module (Blue)
SKU: AI0263Quick Overview
- Display size: 0.96″
- Resolution radio:128 x 64
- Interface modes: I2C/IIC
- Working voltage: 3.3V
- Control Chip: SSD1306
- Dimension : 2 x 2 cm
USB Charger Doctor (Voltmeter Ammeter)
SKU: AI0057Compact and easy to carry, no additional power supply, plug, and play.
It can easily measure the output voltage of the USB port and the device operating current or load voltage
Detect any USB charger such as PC USB, home charger, car charger.
Operating Voltage: 3 to 20V
Maximum Current: 3 A
0.56inch 0-30V Three Wire DC Voltmeter Red
SKU: AI3939QUICK OVERVIEW:
- 0.56″Digital Voltmeter
- DC 0-30V 3 Wires
- Voltage Panel Meter LED Display
DC 12V-60V Lead-Acid Digital Battery Capacity Indicator Charge Tester Voltmeter
SKU: AI0542Quick Overview:
- Voltage Measuring Range: 12–60V DC
- Working Current: 5–15mA
- Material: Copper + ABS Plastic
- Body Color: Black
- Digital Display Light Color: Blue
- Dashboard Cut Size for Installation: 50mm × 30mm
SMD 3 Color LED Module
SKU: AI0342Quick Overview:
- RGB Trichromatic limiting resistor to prevent burnout
- PWM Adjusted Color Mixing
- Working Voltage: 5V
- LED Drive Mode: Common Cathode Driver
CP2102 USB 2.0 to TTL UART Serial Convertor Module
SKU: AI0357 ₹138.06 (₹117.00 + GST)Quick Overview:
- Stable and reliable chipset CP2102
- USB specification 2.0 compliant with full speed 12Mbps
- Standard USB type A male and TTL 6-pin connector
- 6 pins for 3.3V, RST, TXD, RXD, GND & 5V
- Baud rates: 300 bps to 1.5 Mbps
Mini Micro SDCard Reader Module
SKU: AI0577Quick Overview:
- Product Name: Mini Micro SDCard Reader Module
- Supports FAT file system SD carrier
- Supports playing of 4Bit ADCPM format files
- Recognize the voice files automatically
- Support microprocessor and key control
- Audio output: 16bitDAC and PWM
USB Type A Breakout Board – Male
SKU: AI0519 ₹8.85 (₹7.50 + GST)- USB Type: Type-A
- PCB Size : 15x15mm
0.56inch 0-100V Three Wire LED Display Digital DC Voltmeter-RED
SKU: AI2320
Operating Voltage: 0-100 VDC
It is a 3-wire display.
LED Color: RED
Current Consumption : <40 mA
Accuracy: 0.1 V.
Refresh Speed : Approx 200mS/time.
The display on Voltage: 3 V.(but not measure accurately up to 3.6V).
Laser Module
SKU: AI0120Quick Overview
- Voltage: 3.0 V – 5 V.
- Driver: APC circuit.
- Line length: about 135 mm.
- Transmit power: 58mW.
- Operating Current: 40mA.
- Operating Current: 40mA.
- Operating temperature: -36◦C ~ 65◦C.
CH340G USB To TTL(Serial) Converter For Arduino Nano Raspberry Pi
SKU: AI0327 ₹66.67 (₹56.50 + GST)Built-in USB to TTL Transfer chip.
Designed to be used for USB to TTL electronic projects.
TTL interface output, easy to connect to your MCU.
Dual 3.3V and 5V Power output, work with 3.3v and 5 V target device.
The mini-module is designed specifically for STC download and ARDUINO PRO supports all series of STC
Supports WIN7/VISTA/MAC/LINUX(32 bit /64-bit system)
0.96 Inch I2C/IIC 4pin OLED Display Module (Yellow + Blue) Without Soldered Pin
SKU: AI0119Quick Overview
- Display size: 0.96″
- Resolution radio:128 x 64
- Interface modes: I2C/IIC
- Working voltage: 3.3V
- Control Chip: SSD1306
PAM8403 5V Two-channel Stereo Mini Class-D 3W+3W Audio Amplifier
SKU: AI0607Quick Overview
- Dual channel stereo, high output power (3 w + 3 w power @ 5V and 4 ohms load)..
- Double panel wiring solves crosstalk.
- Super mini design allows it to be easily placed in a variety of digital products.
- 3W Output at 10% THD with a 4ΩLoad and 5V Power Supply.
- Filter-less, Low Quiescent Current and Low EMI and Low Noise.
- Short Circuit Protection and Thermal Shutdown
Hi-Link HLK 5M05 5V/5W Switch Power Supply Module
SKU: AI0280Quick Overview:
- Product Name: Hi-Link HLK 5M05 5V/5W Switch Power Supply Module
- Meet UL, CE requirements,
- Ultra-thin, ultra-small
- All voltage input (AC: 90 ~ 264V)
- Low ripple and low noise
1.3 Inch I2C/IIC 128 x 64 -WHITE OLED Display Module 4pin
SKU: AI0081Driver IC: SSH1106
Resolution: 128 x 64 pixel
Display Area : 34.5 x 19mm
Input Voltage: 3.3V ~ 6V
Operating Temp : -40º~70º Celsius
Interface Type : IIC
Pixel Color: White
No of Pins: 4 pin
MH-M18 Wireless Bluetooth Audio Receiver Board Module BLT 4.2 MP3 Lossless Decode
SKU: AI0722Quick Overview
- Small Size Bluetooth Audio Receiver.
- Two-channel Stereo Lossless Playback
- Convenient to use.
- Suitable for DIY projects
DS3231 RTC Module Precise Real Time Clock I2C – AT24C02
SKU: AI0746Accuracy 2 ppm from 0° C to +40° C
Accuracy 3.5 ppm from -40° C to +85° C
Digital Temp Sensor Output: ±3° C Accuracy
Memory Chips: AT24C02 (2Kbit)
Register for Aging Trim
RST Output/Pushbutton Reset Debounce Input
Two Time-of-Day Alarms
Programmable Square-Wave Output Signal
Fast 400 Khz I2C interface
5V 4 Channel Relay Module
SKU: AI0066Quick Overview:
- Product Name : 5V 4 Channel Relay Module
- 5V 4-Channel Relay interface board and each one needs 15-20mA Driver Current.
- Equipped with high-current relay, AC250V 10A; DC30V 10A.
- Standard interface that can be controlled directly by microcontroller (for Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
- Indication LED’s for Relay output status.
150W DC-DC Step-Up Boost Converter 10-32V to 12-35V 6A Adjustable Power Supply Module
SKU: AI0176- Input voltage :10-32V
- Output voltage: 12-35V (adjustable)
- Output Current: 10A (MAX)
- Input Current: 16A (MAX) (Please enhance heat dissipation if more than 10A)
- The non-isolated step-up power conversion module
- Onboard LED illuminates when the voltage is applied to the module
- Equips Multi-turn Potentiometer.
USB Fast Charging Module
SKU: AI1137
Operating Voltage: 12 – 24VDC
Output Power: 36W
Supported Fast Charging Protocol: FCP,AFC,SFCP,SCP
Long Lifespan
TTP224 4-way Capacitive Touch Switch Module
SKU: AI0313Quick Overview
- Onboard TTP224 capacitive touch sensor IC 4 keys
- 4 board-level status indicator
- Working voltage: 2.4V-5.5V
- Advanced Pins breakout, so that the output mode and working mode selectable.
- Low power selection
NE555 Delay Timer Switch Adjustable 5V Relay Module
SKU: AI0170
NE555 Delay Timer Switch Adjustable 5V Relay Module Introducing the NE555 Delay Timer Switch Adjustable 5V Relay Module, your go-to...
Add to cart
Add to Compare
CP2102 Micro USB to UART TTL Module 6Pin Serial Converter UART STC Replace FT232
SKU: AI0727Quick Overview
- 5P – A type USB USB specification 2.0 compliant with full-speed 12Mbps.
- Standard USB type A male and TTL 5pin connector.
- 5pins for 3.3V, TXD, RXD, GND & 5V All handshaking and modem interface signals
- Baud rates: 300 bps to 1.5 Mbps.
- Byte receives buffer; 640 bytes transmit buffer.
12V/24V to 5V 5A Power Module Dc-DC XY-3606 Power Converter
SKU: AI0582Working voltage: DC 9V–36V
Output voltage: 5.2V/5A/25W
9~24V input: Output 5.2V/6A/30W
24~32V input: output 5.2V/5A/25W
32~36V input: output 5.2V/3.5A/18W
AMS1117-3.3 LDO 800MA DC 5V to 3.3V Step-Down Power Supply Module
SKU: AI0673Quick Overview
- Product Name: AMS1117-3.3 LDO 800MA DC 5V to 3.3V Step-Down Power Supply Module
- Input Voltage: 4.5V to 15V
- Output Voltage: 3.3V to 5V
- Output Current: 800mA
- Onboard AMS1117 chip.
- Onboard power indicator to indicate power is turned on: Red LED.
- Output voltage interface, connection to facilitate the experimental.
- Small Compact Size, 3Pin Type, Breadboard Friendly.
0 to 600 °C Surface Thermocouple K Type High Temperature Resistance Probe
SKU: AI2097- Cable length: 1M
- Measuring range: 0 to 600 °C
- Color: Yellow
- Accuracy : ±2.5%/0.75%
- Material: Plastic
- Interface Type: flat plug-in
- Interface Length: 12.5MM
CJMCU 64 Bit 8×8 RGB LED Driver Development Board
SKU: AI3435 ₹135.70 (₹115.00 + GST)QUICK OVERVIEW:
- Dimensions : 70*65*3 mm
- Supply Voltage : 5 VDC.
- Interface : IO .
- 8 x 8 = 64 RGB.
- Chip : WS2812b.
1×4 Matrix – Membrane Type Keypad – 4 Keys
SKU: AI0522- Ultra-thin design & adhesive backing provides easy integration to any project
- Excellent price-performance ratio
- Easy communication with any microcontroller
- 5 pins 2.54mm pitch connector, 4×1 type 4 keys.
- Sticker can peel off for adhesive mounting.
- Operating Voltage(VDC): 12
- Current : 30 mA
36W 3A Short Distance IR Hand Sweep ON-OFF Sensor Module
SKU: AI0666Operating voltage: 12vDC
Output Voltage: 12 V
Output type: Double output
Detection range: adjustable 10-80 MM
Max Power Load: 36 W
Delayed off time: none
Field of application: DC, constant pressure
Load current: 3A optional
Standby current: 10mA
Mini ENC28J60 Ethernet LAN Network Module
SKU: AI0360Quick Overview:
- Fully Compatible with 10/100/1000Base-T Networks
- Integrated MAC and 10Base-T PHY
- Supports One 10Base-T Port with Automatic Polarity Detection and Correction
- Supports Full and Half-Duplex modes
- Programmable Automatic Retransmit on Collision
- Programmable Automatic Rejection of Erroneous Packets
- SPI Interface with Clock Speeds Up to 20 MHz
- For Arduino, SPI, AVR, PIC, LPC, STM32
XL7015 DC-DC Step Down Adjustable Power Supply Buck Module
SKU: AI2176Quick review :
- Input voltage range: 5V-80V DC
- Output voltage range: 1.5V-20V DC adjustable.
- Output current: 0-0.8A.
- High efficiency up to 90%
- Built-in thermal shutdown function
- Built-in current limit function
- Built output short protection function
PL2303 TA Download Cable USB to TTL RS232 Module USB to Serial
SKU: AI0613 ₹92.04 (₹78.00 + GST)Quick Overview
- Built-in TTL COM PC-PL2303HX Chip.
- Standard USB type and TTL 4 pin connector
- Simple and Easy way to give USB support to your designs
- Available for Linux, Mac, WinCE, and Windows (XP, 7), Win 8
- Cable Length: 1M
- Net Weight: 30gm
MT8870 DTMF Audio/Speech Decoding Telephone Module
SKU: AI0316Quick Overview
- Working voltage: 5V
- Power Consumption: 500MW(MAX)r: 500 MW (MAX)
- On-board voice input interface
- On-board LED, it is very convenient to check the output state.
- Onboard 5 x LED indicators for easy viewing output state
- Operating Temperature: -40-+85 °C
- IO Drive: Current Maximum 10mA.
- PCB Size : 25.4×25.4MM
USB to RS485 TTL Serial Converter Adapter FT232
SKU: AI0326Quick Overview:
- Baud rate: 300 – 9216000bps, automatically detecting the serial signal data rate
- Load capacity: support multipoint, each converter allows RS485 interface device to connect 32
- Interface Protection: TVS tube protection, USB self-recovery protection
- Support Windows98/ME/2000/XP/WIN7/Vista, Linux, Mac
- It can be up to 32 devices on the bus.
Hi-Link HLK 10M05 5V/10W Switch Power Supply Module
SKU: AI0762 ₹247.80 (₹210.00 + GST)
Meet UL, CE requirements,
Ultra-thin, ultra-small
All voltage input (AC: 100 ~ 240V)
Low ripple and low noise
Output overload and short circuit protection
High efficiency, high power density
The product is designed to meet the requirements of the EMC and Safety Test
Add to cart
Add to Compare
DC 3-5V X9C103S Digital Potentiometer Board Module for Arduino
SKU: AI0654
Supply voltage: 3V-5V
Chip: X9C103S
Dimensions : 28 x 14 x 4 (LxWxH) mm.
10K span potentiometer.
Add to cart
Add to Compare
LilyPad LED Blue Color
SKU: AI0732Wearable e-textile technology.
Available Various input, output, power, and sensor boards.
Washable
DS18B20 Temperature Sensor Module
SKU: AI0332Quick Overview:
- Product Name: DS18B20 Temperature Sensor Module
- Digital signal output
- 18B20 Temperature Sensor Chip
- Resolution adjustment ranges from 9-12 bytes.
- Send data via a pin
- Temperature measurement ranges: -55°C to +125°C, be accurate to 0.5°C.
Airfly 5V Single Channel Relay Module (Made In India)
SKU: AI0532Quick Overview
- 1 channel relay board
- Operating Voltage 5V
- Max Current : 20mA
- Relay Contact Current Capacity at AC250V: 10A
- Relay Contact Current Capacity at DC5V: 10A
LilyPad LED Yellow Color(1pcs)
SKU: AI4109LED Color: Yellow
Compatibility: LilyPad Arduino Boards
Dimensions: Small and lightweight for wearable integration
Voltage: Typically operates at 3.3V to 5V
Current Consumption: Depends on the specific LED and operating conditions
Connection: Designed for sewing onto fabric or textile
Features: Low power consumption, easy integration
Application: Wearable electronics, textile-based projects
SYD1230 6mm 650nm 5mW Red Line Laser Module
SKU: AI7231Quick Overview
- Laser Output Type: Red LINE Laser
- Weight: 15 gm.
- Wavelength: 650nm
- Voltage: 3~6V
- Output Power: Min 2.5mW, Typical 3.0mW, Max 5.0mW
- Working current: Min 10mA, Typical 20mA, Max 25mA
- Working voltage: Min 2.3VDC, Typical 4.5VDC, Max 8.0VDC
1 Channel Relay Module, 30A with Optocoupler, Isolation 12V Supports, High and Low Triger
SKU: AI2962
QUICK OVERVIEW
- Channel: 1 channel
- Relay Voltage: 12V
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
AC-DC Power Supply Module 24V 6A Switching Power Supply Board
SKU: AI2131
QUICK OVERVIEW:
- Input voltage:AC85-265V
- Output voltage:DC 24V
- Output current:6A
- Output power:100W
- Frequency:50HZ/60HZ
DB9 RS232/485 9pin Terminal Male Screw with Shell,and Screw
SKU: AI3534
DB9 RS232 D-SUB Male Adapter 9-pin Port Adapter to Terminal Connector Signal Module
Suitable for variety of pin connections required to use serial communications industrial control products
No need solder! It is convenient
DB9 male adapter with screw
LilyPad LED Red Color(1pcs)
SKU: AI4107
This is a simple pack of five Red Lily Pad LEDs that are still attached to one another, letting you...
Add to cart
Add to Compare
JQ6500 Voice Module MP3 Module MCU Serial Port Control Broadcast one-on-one 5 Way Control Music IC 16Mbit
SKU: AI0657Quick Overview:
- Support all bit rate 11172-3 and ISO13813-3 layer3 audio decoding
- Sample rate support (kHz): 8 / 11.025 / 12 / 16 / 22.05 / 24 / 32 / 44.1 / 48
- Support Normal, Jazz, Classical, Pop, Rock and other sound effects
- UART interface: standard serial port, TTL level, baud rate can be set
- Input voltage: 3.2V–5V (best 4.2V)
- Rated current: 20mA
PCB Mounted Passive Buzzer Module
SKU: AI0651Quick Overview:
- Operating Voltage: 1.5 ~ 15V DC
- Working Current: Less than 25mA
- Tone Generation Range: 1.5 ~ 2.5 kHz
- Dimensions (L x W x H): 19 x 15 x 10 mm
AVR ISP 10 Pin to 6 Pin Adapter Board
SKU: AI0705Quick Overview
- Made of high-quality material, practical and durable
- No. of Pinon USBASP side: 10.
- No. of Pinon Device under programming side: 6.
- Connector type on USBASP side: Male.
- Connector type on Device under programming side: Female.
- Header Pin Pitch: 2.54mm (0.1in).
- Pin Numbers Text: Yes on Top and Bottom sides of every pin.
Waveshare Industrial USB TO RS485 Bidirectional Converter, Onboard original CH343G, Multi-Protection Circuits
SKU: AI1487QUICK OVERVIEW:
- Brand: Waveshare
- Product: Industrial USB TO RS485 Bidirectional Converter
- Device Port: RS485
- Baud Rate: 300bps ~ 3Mbps
- Operating voltage: 5V
- Connector: USB-A
LilyPad LED Orange Color (1pcs)
SKU: AI4110- LED Color: Orange
- Compatibility: LilyPad Arduino Boards
- Dimensions: Small and lightweight for wearable integration
- Voltage: Typically operates at 3.3V to 5V
- Current Consumption: Depends on the specific LED and operating conditions
- Connection: Designed for sewing onto fabric or textile
- Features: Low power consumption, easy integration
- Application: Wearable electronics, textile-based projects
AT24C256 I2C Interface EEPROM Memory Module
SKU: AI0646Quick Overview:
- Chipset: FT24C256A
- Operating Temperature: -55°C to 125°C
- Storage Temperature: -65°C to 150°C
- The voltage on any pin with respect to ground: -1.0V to 6.25V
- Maximum Operating Voltage: 6.25V DC
LED Connector 4pin 10mm (Pack of 2)
SKU: AI5236- LED Connector 4pin 10mm L Shape.
- The connectors of this wire are for strips which PCB board width is 10mm
- Suitable for RGB / RGBW / RGBWW color 5050 LED strips
Human/Metal Touch Sensor Module
SKU: AI0136Quick overview
- Operating Voltage: 5V DC
- Output: Analog/Digital
- Signal Output Indicator: Yes
- Power Supply Range: 2V to 5.5V DC
- Power Consumption: Low
- Installation: Four M2 screws positioning holes for easy integration
LilyPad LED Green Color
SKU: AI0733Wearable e-textile technology.
Available Various input, output, power, and sensor boards.
Washable
CJMCU MCP4725 I2C DAC Breakout Development Board
SKU: AI2172Quick review :
- 12-bit resolution
- Small package
- 2.7V to 5.5V supply
- Internal EEPROM to store settings
- I2C Interface (Standard, Fast, and High-Speed supported)
RDA5807M FM Stereo Radio Module RRD-102 V2.0 Wireless Pro for Arduino Tuner
SKU: AI0609Quick Overview
- Supply voltage: 2.7 to 3.3 V.
- Output Impedance: 32Ω.
- Frequency band: 50 -115 MHz.
- Digital auto gain control (AGC).
- Only support 2-wire bus interface.
USB ASP AVR Programmer for ATMEL Processors
SKU: AI0399 ₹168.74 (₹143.00 + GST)
Compatible Chips:
ATMEGA Series
Tiny Series
Classic Series
CAN Series
PWM Series
Sliding Adjustable Potentiometer Module 10k
SKU: AI0655Voltage: 3.3V or 5V.
Port: Analog.
Resistance: 10K.
Dimensions: 91 x 21 x 30 mm(LxWxH)
Weight: 18 gm.
24 Bit WS2812 5050 RGB LED Built-in Full Color Driving Lights Circular Development Board
SKU: AI3434QUICK OVERVIEW:
- Outer Diameter: 89.5 mm.
- Supply Voltage: DC 4-7V.
- Communication interface: single wire communication.
- Send data at speeds of 800Kbps.
- The color of the light was highly consistent
- Full-color module, Full-color soft lights a lamp strip.
Ultra-Small Size DC-DC 5V 3A BEC Power Supply Buck Step Down Module
SKU: AI2148- Input voltage: 7 – 26V
- Output voltage: 5V
- Output current: 3A (Max), the current should be controlled within 1.6A for working long hours
- Conversion efficiency: 96% (Max)
- Output ripple: < 30mV
MAX7219 Dot Led Matrix Module MCU Control LED Display Module
SKU: AI0040Quick Review
- Driver Chip: MAX7219
- Input Voltage: 3.7 to 5.3 V
- Input Current: 320 mA
- Display Dimensions: 32x32x6 mm (LxWxH)
- PCB Dimensions: 50×32 mm (LxW)
Free Shipping
On orders above ₹999
COD Available
Min. order ₹250 for COD
GST Invoice
Available on all orders
1,50,000+ Orders
Delivered across India
Expert Support
Toll Free: 1800 209 0998
Product categories
- Show All Categories
- 3D Printers and Parts (379)
- Batteries, Chargers and Accessories (811)
- Clearance Sale (0)
- Development Boards (438)
- DIY Learning and Robot Kits (117)
- Drone Parts (1364)
- EBike parts (140)
- Electronic Components (783)
- Electronic Modules and Displays (1201)
- FPV Freestyle Mid/High KV Drone Motors (0)
- IoT and Wireless (544)
- Mechanical Parts and Workbench Tools (241)
- Motors & Drivers & Pumps & Actuators (583)
- Sensor Modules (639)
- Electronic Modules and Displays (1201)
- Character LCD Displays (2)
- Display modules (265)
- Electronic Modules (755)
- Measuring Instruments (102)
- Power Supply (62)
- Signal Generator Module & Oscilloscopes (17)