Looking for Esp32 Battery? 2 x 18650 Lithium Battery Shield for Arduino,ESP32 ,ESP8266 is available at Zbotic with fast shipping across India.
2 x 18650 Lithium Battery Shield for Arduino,ESP32 ,ESP8266
Introducing the 2 x 18650 Lithium Battery Shield – the ultimate power solution for your Arduino ESP32 and ESP8266 projects. This versatile module enables portable power, giving you the freedom to power your devices wherever you go.
Designed for flexibility, the shield features:
– Three 5V 3A solder pads and three 3V 1A solder pads for powering a wide range of devices.
– A full-size USB connector for easy output.
– Micro USB and USB Type-C connectors for convenient charging of the 18650 lithium cells.
Perfect for projects that require extended battery life or the ability to power multiple sensors and actuators at different voltages, this shield is a must-have for any portable project.
Operating the module is simple:
To power on: Press the push button once.
To power off: Release the button after turning it on, then press and hold the button for a few seconds.
With its user-friendly design and reliable performance, the 2 x 18650 Lithium Battery Shield is the ideal companion for your portable electronics projects.
Features:
- High-Quality Construction
- Uses two 18650 cells
- Dual Outputs 5V 3A; 3V 1A
- USB Type C for charging the 18650 cells
Specification:
| Output | 3 * 5V 3A 3 * 3V 1A |
|---|---|
| No. of Li-ion cells | 2 |
| Length (mm): | 100 |
| Width (mm) | 50 |
| Height (mm) | 25 |
| Weight (gm) | 36 |
| Shipping Weight | 0.039 kg |
| Shipping Dimensions | 10 × 5 × 3 cm |
Package Includes:
1 x 2 x 18650 Lithium Battery Shield for Arduino, ESP32, ESP8266
2 x 18650 Lithium Battery Shield for Arduino,ESP32 ,ESP8266 Overview
The 2 x 18650 Lithium Battery Shield is a compact power module designed to stack onto Arduino, ESP32 or ESP8266 development boards. By accommodating two 18650 Li-ion cells, it delivers stable 5V and 3V outputs to make your microcontroller projects fully portable.
Key Features of 2 x 18650 Lithium Battery Shield for Arduino,ESP32 ,ESP8266
- Supports two 18650 Li-ion cells for extended runtime
- Dual outputs: three 5V 3A solder pads and three 3V 1A solder pads
- Full-size USB Type-A output connector for easy device powering
- Micro USB and USB Type-C input ports for convenient charging
- Robust PCB and cell holder for secure construction
- Genuine product with fast shipping from Zbotic across India
Applications and Use Cases
- Portable Wi-Fi sensor nodes based on ESP8266 in outdoor environments
- Battery-backed Arduino data loggers for remote monitoring
- Field-deployable ESP32 prototypes without mains power
- Small mobile robots requiring regulated 5V or 3V supply
- On-the-go demonstrations and DIY electronics workshops
How to Use 2 x 18650 Lithium Battery Shield for Arduino,ESP32 ,ESP8266
Slide the shield onto the header pins of your Arduino, ESP32 or ESP8266 board. Insert two charged 18650 cells into the holder, then connect your microcontroller’s 5V or 3V input to the corresponding solder pad or USB output. Charge the batteries via the Micro USB or USB Type-C port—LED indicators will show charging status.
Why Buy from Zbotic?
- Genuine Products: All items sourced from authorized distributors
- Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
- Free Shipping: Free delivery on qualifying orders
- COD Available: Cash on Delivery, UPI, cards, net banking
- Technical Support: Expert help for setup and troubleshooting
- Easy Returns: Hassle-free replacement for defective products
Frequently Asked Questions
Can I use this shield with any Arduino or ESP32/ESP8266 board?
Yes, the shield is pin-compatible with standard Arduino UNO headers and common ESP32/ESP8266 dev boards, making it simple to stack and power your module.
How do I charge the 18650 cells on this shield?
Connect a 5V adapter or USB charger to the onboard Micro USB or USB Type-C port. The shield’s built-in charging circuit handles both cells simultaneously and indicates charging status via LEDs.
What output currents can I draw from the shield?
The shield provides up to 3A total on its 5V output pads and up to 1A on its 3V pads, allowing you to power a variety of peripherals and sensors.
Technical Specifications
| Model | ESP32 |
|---|---|
| Package Quantity | 18650 pcs |
| SKU | AI3452 |
| Weight | 0.05 kg |
| Availability | In Stock |
Applications & Use Cases
The 2 x 18650 Lithium Battery Shield for Arduino,ESP32 ,ESP8266 is a versatile boost converter used across a wide range of applications including voltage step-up for electronics, battery-powered LED drivers, USB power banks, and low-voltage to high-voltage conversion.
Common use cases:
- Boosting 3.7V LiPo to 5V for USB output
- Driving 12V LED strips from a 5V source
- Building a portable power bank
This product is ideal for power electronics designers and DIY enthusiasts.
Technical Tip: Boost converters increase voltage at the cost of reduced current capacity. Total power (W) remains roughly constant minus efficiency losses.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
