Maximum 20A current
Operating Voltage: 5V-12V
Size: 41mm*16mm*14mm
Net Weight: 13g
Type: LilyPad LED
Color: Green
Quantity: 1 piece
Attachment: Snap-apart design
Integration: Large sew tabs for easy sewing into fabric
Applications:
1. Single phase pure sine wave inverter
2. PV Inverter
3. Wind power inverter
4. Uninterruptible Power Supply UPS System
5. Digital generator system
6. IF power
7. Single-phase motor speed controller
8. Single-phase inverter
9. Sine wave dimmer
10. Sine wave regulator
Wide Input voltage: 3.5V-35V
Output Voltage: 4-35V (Adjustable)
Output current: rated current 3A MAX ( Heat-sink Needed)
Conversion efficiency: Up to 92% (output voltage higher, the higher the efficiency)
Switching Frequency: 50KHz
Dual-Channel Stereo Output
Run-on 7V to 15V power Supply
32 Steps DC volume control has a +32dB to -75dB range.
40 pin QFN 6 x 6 mm package.
Much higher efficiency in terms of cost and performance than competitors’ ICs
QUICK OVERVIEW:
Multipurpose Ruler Scale
Gold plated Drawing
Hard PCB material
Compaq easy to carry in the toolkit.
DC-DC DC5-30V to1.25-30V 8A Power Module with Adjustable Voltage
QUICK OVERVIEW:
6-way relay output module contact capacity is 10A 250V.
input IN1, IN2, IN3, IN4, IN5, IN6 signal, a low level is effective.
Using single-chip design, reliable performance, strong anti-interference, no false triggering, superior performance.
The trigger terminal has optocoupler isolation, the independent external power supply can trigger completely isolated.
Each relay has an activity indicator light. With 4 fixed bolt holes, easy installation.
Support all SCM control. It is applicable to the industrial sector, PLC control and home intelligent control.
Display Size: 1.3 inches
Resolution: 128×64 pixels
Pixel Color Options: Yellow (128×16 pixels) or Blue (128×48 pixels)
Protocol Support: SPI, I2C
Operating Voltage: 3.3V – 5V
Operating Temperature: -30°C to 70°C
QUICK OVERVIEW:
QUICK OVERVIEW:
QUICK OVERVIEW
Power supply voltage: 5V
Communication interface: RS485
Relay channels: 8
Contact form: 1NO 1NC
Communication protocol: Standard Modbus RTU protocol
QUICK OVERVIEW:
QUICK OVERVIEW:
QUICK OVERVIEW
QUICK OVERVIEW:
Has been assembled, and electrical test passed.
Operating Voltage: 5V
Operating Current: 12.5mA
Maximum Load: 2A @ 240VAC
Input control signal voltage:
0-2.5V status low level, relay OFF
3-5V status high level, relay ON
Overview
All voltage input (AC: 90 ~ 264V).
Output voltage: 5 VDC.
Output Power: 2W.
Output overload and short circuit protection.
No-load loss <0.1W.
Supply Voltage: DC 5V
Quiescent Current: 5mA
Maximum Operating Current: 190mA
Trigger Mode: High and low-level trigger
Load Voltage: DC 30V / AC250
Load Current: 30A
Relay Life: more than 100,000 times
QUICK OVERVIEW:
QUICK OVERVIEW
Maximum 20A current
Operating Voltage: 5V-12V
Size: 41mm*16mm*14mm
Net Weight: 13g
QUICK OVERVIEW:
Operating Voltage: 4.5-30 VDC
It is a 2-wire display.
LED Color: RED
Current Consumption: < 15 mA.
Accuracy: 0.1 V.
Refresh Speed: Approx 200mS/time.
Measure accurately up to 3.6 V.
Size: 0.96-inch OLED
Material: PM OLED
Resolution: 128*64
Interface type: SPI, IIC
Working voltage: 3.3V
Control chip: SSD1306
Meet UL, CE requirements
Ultra-thin, ultra-small
Input Voltage Range(V): 100 ~ 240
Low ripple and low noise
Output overload and short circuit protection
High efficiency, high power density
The product is designed to meet the requirements of EMC and Safety Test
On orders above ₹999
Min. order ₹250 for COD
Available on all orders
Delivered across India
Toll Free: 1800 209 0998