Red Two-Wire 0.56 Inch DC5V-120V DC Digital Display Voltmeter For Car Bicycle Motorcycle
SKU: AI3379 ₹83.19 (₹70.50 + GST)QUICK OVERVIEW
- This is a 2-wire display that measures voltage from 0 to 200 VDC. The LED color is red and the current consumption is usually 5-15mA, but never more than 20mA. The display has an accuracy of 0.1 V and a refresh speed of 300mS/time.
XD-21 LM358 Gain Amplification Module Operational Amplifier Module
SKU: AI0726 ₹30.80 (₹26.10 + GST)LM358 chip onboard.
100 gain of the circuit design.
10K onboard adjustable resistance, you can adjust the magnification.
Onboard power indicator.
The chip has led major pin can be directly input and output signals.
0.91 inch 128×32 Blue OLED Display Module with I2C/IIC Serial Interface
SKU: AI0299 ₹155.76 (₹132.00 + GST)Quick Overview
- Driving IC: SSD1306
- Operating Voltage: 3.3-5V
- Resolution Ratio: 128 x 32
- Text Color: White
- Background Color: Black
XL7015 DC-DC Step Down Adjustable Power Supply Buck Module
SKU: AI2176 ₹86.14 (₹73.00 + GST)Quick review :
- Input voltage range: 5V-80V DC
- Output voltage range: 1.5V-20V DC adjustable.
- Output current: 0-0.8A.
- High efficiency up to 90%
- Built-in thermal shutdown function
- Built-in current limit function
- Built output short protection function
0.28 100V 50A Dual LED Voltmeter Ammeter Blue+Red
SKU: AI3945 ₹103.84 (₹88.00 + GST)QUICK OVERVIEW:
- Operating voltage: DC 4.5 ~ 30V
- Minimum resolution(V): 100V
- Minimum resolution(A): 50A
- Display color: Red and Blue (two-color display)
- Measure accuracy: 1%
DC 12V Wired Mini Horn Siren Home Security Sound Alarm System 120DB Anti-theft Speaker Buzzer
SKU: AI0720 ₹149.86 (₹127.00 + GST)Quick Overview
- Material: ABS plastic
- Color: Red-black
- Length of Wire: 1m
- Sound Level: 120DB
- Voltage: 12V
- Standard Current: >=320mA
- Weight: 132g
- Diameter: 50mm
- Height: 52mm
- Installation method: wired
W5500 TCP / IP SPI to LAN Ethernet Interface SPI to LAN / Ethernet Converter
SKU: AI0718 ₹368.16 (₹312.00 + GST)Quick Overview
- 80MHz high-speed SPI interface
- Built-in hardware TCPIP protocol stack
- Support up to 8 Socket connections
- Support TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE protocol
- Support power-down wake up
- Support high-speed serial peripheral interface (SPI mode 0~3)
- Internal 32K byte send and receive buffer
0.36 inch Red 4 Digit 7 Segment LED Display CA
SKU: AI3826 ₹18.53 (₹15.70 + GST)Size: 0.36 inch
Emitting Color: Red
Mode: Common-Anode (CA)
Digit: 4-Digit
Category: LED 7-Segment Display
300W 20A DC-DC Buck Converter Step-down Module Constant Current LED Driver Module
SKU: AI2107 ₹335.12 (₹284.00 + GST)- High Power DC-DC Step Down Module
- Input Voltage: 6-40V DC
- Output Voltage: 1.25-36V DC
- Efficiency: 97%
- Maximum Power: 300W
Hi-Link HLK 5M12 12V/5W Switch Power Supply Module
SKU: AI0704 ₹195.88 (₹166.00 + GST)Quick Overview
- Meet UL, CE requirements,
- Ultra-thin, ultra-small
- All voltage input (AC: 90 ~ 264V)
- Low ripple and low noise
- Output overload and short circuit protection
- High efficiency, high power density
SX1308 DC-DC Step Up Adjustable Power Supply 28V 2A 1.2Mhz Power Booster Module
SKU: AI0591 ₹42.60 (₹36.10 + GST)QUICK OVERVIEW
- Oscillation frequency 1.2MHz
- efficiency is as high as 95%
- The circuit has short circuit protection, overheating protection function
- 10k to adjust potentiometer, adjust the output voltage
SYD1230 6mm 650nm 5mW Red Line Laser Module
SKU: AI7231 ₹168.74 (₹143.00 + GST)Quick Overview
- Laser Output Type: Red LINE Laser
- Weight: 15 gm.
- Wavelength: 650nm
- Voltage: 3~6V
- Output Power: Min 2.5mW, Typical 3.0mW, Max 5.0mW
- Working current: Min 10mA, Typical 20mA, Max 25mA
- Working voltage: Min 2.3VDC, Typical 4.5VDC, Max 8.0VDC
MXD1230 6mm 650nm 5mW Red Line Laser Module
SKU: AI1083 ₹168.74 (₹143.00 + GST)
1 channel 5V 10A Relay Control Board Module with Optocoupler
SKU: AI0902 ₹56.64 (₹48.00 + GST)
Channel: 1 channel
Relay Voltage: 5V
High impedance controller pin
Pull-down circuit for the avoidance of malfunction
One normally closed contact and one normally open contact
Triode drive, increasing relay coil
Hi-Link HLK-10M12 12V 10W power module
SKU: AI4252 ₹253.70 (₹215.00 + GST)- Model Number: HLK-10M12
- Output Power (W): 10
- Output Type: Single
- Output Current (mA): 830
- Working Temperature (C): -25 +60
1 Channel Relay Module, 30A with Optocoupler, Isolation 12V Supports, High and Low Triger
SKU: AI2962 ₹204.14 (₹173.00 + GST)QUICK OVERVIEW
- Channel: 1 channel
- Relay Voltage: 12V
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
LilyPad LED Red Color(1pcs)
SKU: AI4107 ₹15.10 (₹12.80 + GST)
JQ6500 Voice Module MP3 Module MCU Serial Port Control Broadcast one-on-one 5 Way Control Music IC 16Mbit
SKU: AI0657 ₹192.34 (₹163.00 + GST)Quick Overview:
- Support all bit rate 11172-3 and ISO13813-3 layer3 audio decoding
- Sample rate support (kHz): 8 / 11.025 / 12 / 16 / 22.05 / 24 / 32 / 44.1 / 48
- Support Normal, Jazz, Classical, Pop, Rock and other sound effects
- UART interface: standard serial port, TTL level, baud rate can be set
- Input voltage: 3.2V–5V (best 4.2V)
- Rated current: 20mA
Real Time Clock DS1307 RTC I2C Module AT24C32 with Battery
SKU: AI0939 ₹42.13 (₹35.70 + GST)Quick Overview
- Two-wire I2C interface.
- Hour: Minutes: Seconds AM/PM.
- Day Month, Date – Year.
- DS1307 based RTC (Battery include).
- 1Hz output pin.
- Available in 8-pin DIP or SOIC
MAX7219 LED Dot Matrix 4 In 1 Display with 5P Line Module
SKU: AI0329 ₹279.66 (₹237.00 + GST)Quick Overview:
- Driver Chip: MAX7219
- Input Voltage: 5V
- Input Current: 320 mA
- Display Dimensions: 32x32x6 (LxWxH) mm
- PCB Dimensions: 128×32 (LxW) mm
DC Power Module DC Power Adapter Plate
SKU: AI0520 ₹32.69 (₹27.70 + GST)- Compatible with connector size: 5.5×2.1 mm.
- Power output interface: 2 VCC, 2-way GND
- Reliable and safe connection
- Size: 26×12×13(L×W×H) mm
- Hole Diameter: 6.5mm
- Pin Diameter: 2.1mm
- It has wide use for safe and reliable connection between various Application and power sources
4000W High-Power Thyristor Electronic Regulator, Dimming Speed Regulation, with Shell
SKU: AI2384 ₹269.04 (₹228.00 + GST)Input Voltage: AC 220V
Maximum Power Handling: 4000W
Control Method: Thyristor SCR (Silicon Controlled Rectifier)
Compatibility: Suitable for controlling various 220V appliances
Usage: Light dimming, fan speed control, stove temperature regulation, etc.
Adjustment Range: Output voltage adjustable between 0 – 220 volts
LilyPad Slide Switch Module
SKU: AI0735 ₹9.91 (₹8.40 + GST)Quick Overview
- Wearable e-textile technology.
- Available Various input, output, power, and sensor boards.
- Washable
DB9 Male Screw Terminal to RS232 RS485 Conversion Board
SKU: AI0650 ₹62.42 (₹52.90 + GST)Brings all 9 pins of a DB9 connector to screw terminal blocks
Adapter used for communication debug
9 pcs signal line was all lead out, name and number clearly labeled;
All-copper DR9 seat, anti-oxidation, better contact;
Military board, three anti-paint sprays an entire board, corrosion-resistant;
Terminal spacing 3.96MM, screw hole diameter 2MM, need to use a width of 2MM screwdriver for assembly;
Use of environmentally friendly copper terminals, through IS0-9001.
SPI to Ethernet Hardware TCP/IP W5500 Ethernet Network Module
SKU: AI0719 ₹376.42 (₹319.00 + GST)
PCB Mounted Passive Buzzer Module
SKU: AI0651 ₹22.77 (₹19.30 + GST)Quick Overview:
- Operating Voltage: 1.5 ~ 15V DC
- Working Current: Less than 25mA
- Tone Generation Range: 1.5 ~ 2.5 kHz
- Dimensions (L x W x H): 19 x 15 x 10 mm
LilyPad LED Orange Color (1pcs)
SKU: AI4110 ₹10.38 (₹8.80 + GST)- LED Color: Orange
- Compatibility: LilyPad Arduino Boards
- Dimensions: Small and lightweight for wearable integration
- Voltage: Typically operates at 3.3V to 5V
- Current Consumption: Depends on the specific LED and operating conditions
- Connection: Designed for sewing onto fabric or textile
- Features: Low power consumption, easy integration
- Application: Wearable electronics, textile-based projects
0.28inch 0-100V Three Wire DC Voltmeter Green
SKU: AI2312 ₹66.08 (₹56.00 + GST)QUICK OVERVIEW:
- Measuring Range: 0-100 VDC
- It is a 3-wire display.
- LED Color: GREEN
- Current Consumption : < 10 mA.
- Accuracy: 0.1 V.
- Refresh Speed : Approx 200mS/time.
- Measure accurately up to 3.6 V
TPA3116D2 XH-M543 120W Dual Channel High Power Digital Power Amplifier Board
SKU: AI2780 ₹285.56 (₹242.00 + GST)QUICK OVERVIEW
- Original TPA3116D2 core technology
- Easy Plug and Play Operation
- Dynamic operating Voltage Range: 12 to 24V
- High fidelity 120W out at both Channel
NE555 + CD4017 Water Flowing Light LED Module DIY Kit
SKU: AI1091 ₹57.82 (₹49.00 + GST)Chip: NE555, CD4017
LED Quantity: 10pcs
LED Color: Red
Voltage: 2.5V – 14.5V
PCB Size: 54mm x 21mm
PCB Thickness: 1.6mm.
30A Intelligent LCD Solar Controller
SKU: AI0833 ₹375.24 (₹318.00 + GST)
Built-in Industrial Micro-Controller
Big LCD Display
All Adjustable Parameters
Full 4 Stage PWM Charge Management
Non-Destructive MP3 Decoding Board with Self-Powered TF Card U Disk Decoded Player Module
SKU: AI0606 ₹96.76 (₹82.00 + GST)Support MP3 format, playing power on automatically.
When mp3 is played the red LED flashes.
Support U disk (test 32G), TF Card (test 16G) play mode; power on default.
Buttons can be adjusted up and down to control songs, volume up and down, pause or play, mode switching.
Press menu button enter the single / all song play mode.
USB LED Book Lights
SKU: AI2120 ₹31.51 (₹26.70 + GST)- Light Color: Warm light / White Light
- Power Source: USB, Voltage: 5V
- Current: 500mah LED quantity
- Adopting high technology, show excellent performance
- Compatible Device: USB device / power bank / mobile charger / computer / laptop
DS1302 Real Time Clock (RTC) Module
SKU: AI0528 ₹42.36 (₹35.90 + GST)Quick Overview
- Crystal 32.768KHz, matching capacitance 6pF
- DS1302 8-pin SMD homemade chips
- Seconds, Minutes, Hours, Day of Month, Day of Week, and Year
0.96 Inch I2C/IIC 4-Pin OLED Display Module -WHITE
SKU: AI2136 ₹217.12 (₹184.00 + GST)Size: 0.96 inch
Resolution: 128 x 64
Controlling Chip: SSH1106
Display Area: 21.74 x 10.86mm
Driving Voltage: 3.3-5V
Operating Temperature: -40~70 degrees Celsius
Interface Type: IIC
Light Color: White
CJMCU MCP4725 I2C DAC Breakout Development Board
SKU: AI2172 ₹115.64 (₹98.00 + GST)Quick review :
- 12-bit resolution
- Small package
- 2.7V to 5.5V supply
- Internal EEPROM to store settings
- I2C Interface (Standard, Fast, and High-Speed supported)
1 Road/Channel Relay Module (with light coupling) 12V
SKU: AI0832 ₹71.98 (₹61.00 + GST)
Operating Voltage: 12V DC
Equipped with high-current relay 10A@250VAC / 10A@30VDC
It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
Freewheeling diode to protect your microcontroller
Input Signal Pin connected to Burg stick for easy accessibility
LED Status indicators to indicate the relay ON/OFF status
Mounting holes provided
DSO138 2.4″ TFT Handheld Pocket-size Digital Oscilloscope Kit DIY Parts Electronic Learning Set Soldered
SKU: AI0290 ₹1,213.04 (₹1,028.00 + GST)Quick Overview
- This kit uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen.
- Adjustable vertical displacement, and with instructions.
- With automatic, regular and one-shot modes, easy to capture the moment waveform.
- Available rising or falling edge trigger.
- Observable previous trigger waveform (negative delay).
- Can freeze at any time waveform display (the HOLD function).
- Maximum Real-time Sampling Rate: 1Msps
- Accuracy: 12Bit
- Sampling Buffer Depth: 1024 bytes
- Analog Bandwidth: 0-200KHz
DB9 RS232/485 9pin Termina Female Screw with Shell,and Nut
SKU: AI3533 ₹125.08 (₹106.00 + GST)QUICK OVERVIEW:
- This breakout adapter is solderless. No soldering or crimping required.
- Comes with a wire holder for fixing cable and avoiding twisting the case. The wire board is printed with wire number which is convenient for quick wiring.
- The breakout board comes already installed in a plastic hood enclosure with a openable cover.
- Package Conatins: 1 X Female Nuts Breakout Board with Case , 2 X Screws , 1 x Line Clamp
- The breakout board can be used for automatic control equipment, industrial control equipment, cash register, tax control machine, computer, etc.
D4184 Mosfet control Module Replacement Relay
SKU: AI2432 ₹36.23 (₹30.70 + GST)QUICK OVERVIEW:
- Model: D4184
- MOS tube: 40V 50A
- Dimensions: 32.6mm X 16.5mm
- Mounting Holes Diameter: 2mm
- Compatible with MCU and control board, 3V or 5V signal.
- High-level start, low-level stop, PWM speed regulation.
CJMCU-123 WS2812 RGB LED Breakout Module
SKU: AI1088 ₹25.13 (₹21.30 + GST)
Supply Voltage: 5V.
Viewing angle: 120 degrees
The color of the light was highly consistent
Full-color module, Full-color soft lights a lamp strip.
Built-in electric reset circuit and power lost reset circuit.
Each pixel of the three primary colors can achieve 256 brightness levels, or 16M colors full-color display, and scan frequency not less than 400Hz/s.
A03B 1 Road 5V Low Level Solid State Relay Module with Fuse SSR 250V 2A Fuse
SKU: AI0320 ₹94.40 (₹80.00 + GST)Trigger voltage: 5VDC
Trigger current: 2mA
Switching Voltage: 240VAC@2A
Triggering: Low-level
XY-LPWM Signal Generator PWM Pulse Frequency Duty Cycle Adjustable Module LCD Display Module
SKU: AI2763 ₹159.30 (₹135.00 + GST)QUICK OVERVIEW:
- LCD display frequency and duty cycle, very clear, PWM output can be set separately frequency and duty cycle.
- It can be used as a square wave signal generator, generate a square wave signal.
- It is very simple, will save parameters automatically, power off is not lost.
MP3 Bluetooth 4.1 Decoder Board
SKU: AI1103 ₹90.86 (₹77.00 + GST)
Operating Voltage: 3.7 – 5VDC
SNR: 90dB
Support Profile: A2DP / AVCTP / AVDTP / AVRCP / HFP
Hi-Link 1D0505 DC-DC Step-Down Module Power Supply 5V to 5V2
SKU: AI0703 ₹109.74 (₹93.00 + GST)- Working environment temperature: -40- + 85 Degree
- Storage temperature: -40- + 80 Degree
- Relative humidity: 5-95%
- Cooling method Natural cooling
- Atmospheric pressure: 80-106 Kpa
Dual Led 0.28 Display for DC0-100V Voltage and Current Test Digital Instrument Digital Meter Panel Amplifier Red Blue 10A
SKU: AI3381 ₹105.02 (₹89.00 + GST)
4×4 Matrix 16 Keyboard Keypad
SKU: AI2126 ₹149.86 (₹127.00 + GST)QUICK OVERVIEW:
- Easy communication with any microcontroller.
- Tactile type switches.
- Over 1,000,000 operations per key.
- Contact rated for 12V dc @ 20mA.
- Over 1,000,000 operations per key.
MAX7219 Dot Led Matrix Module MCU Control LED Display Module
SKU: AI0040 ₹168.74 (₹143.00 + GST)Quick Review
- Driver Chip: MAX7219
- Input Voltage: 3.7 to 5.3 V
- Input Current: 320 mA
- Display Dimensions: 32x32x6 mm (LxWxH)
- PCB Dimensions: 50×32 mm (LxW)
Ultra-Small Size DC-DC 5V 3A BEC Power Supply Buck Step Down Module
SKU: AI2148 ₹89.25 (₹85.00 + GST)- Input voltage: 7 – 26V
- Output voltage: 5V
- Output current: 3A (Max), the current should be controlled within 1.6A for working long hours
- Conversion efficiency: 96% (Max)
- Output ripple: < 30mV
Waveshare Industrial USB TO RS485 Bidirectional Converter, Onboard original CH343G, Multi-Protection Circuits
SKU: AI1487 ₹702.10 (₹595.00 + GST)QUICK OVERVIEW:
- Brand: Waveshare
- Product: Industrial USB TO RS485 Bidirectional Converter
- Device Port: RS485
- Baud Rate: 300bps ~ 3Mbps
- Operating voltage: 5V
- Connector: USB-A
1 Digit 7 Segment LED Display
SKU: AI0510 ₹8.38 (₹7.10 + GST)QUICK OVERVIEW
- High Intensity Output
- Economically Priced
- Color: Red
- Size: 0.56″ (LxW – 0.7″ x 0.5″)
- Easy to Mount
- RoHS Compliant
1.3 Inch 240*240 RGB TFT IPSLCD Module 7pin ST7789 Chip
SKU: AI3905 ₹264.32 (₹224.00 + GST)1.3 TFT LCD with wide ±80° viewing angle.
RGB Full color display
240 x 240 high resolution 260PPI display
SPI interface w/out CS pin
ST7789 LCD display controller
3.3 operation
LilyPad Button Board Module For Arduino
SKU: AI0730 ₹20.65 (₹17.50 + GST)LilyPad is a wearable e-textile technology.
Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing.
Various input, output, power, and sensor boards are available.
4-20mA to 5V Converter for Arduino Industrial Sensor Interface Board
SKU: AI2144 ₹90.86 (₹77.00 + GST)QUICK OVERVIEW:
- Current Input support 4-20Ma & 0-20mA
- voltage output support 0-3.3V 0-5V 0-10V
- Weight: 12 g
- Wide supply voltage range, the output has multiple voltage ranges
- Zero and range can be adjusted
4×4 Matrix 16 Button Keypad Keyboard Module
SKU: AI0521 ₹46.49 (₹39.40 + GST)- 4×4 Matrix Keyboard Module with 16 buttons
- Small in size and hence Save space
- Expanded development application modules for single chip
- With 16 keys and 8 pin
AD620 Microvolt/Millivolt Voltage Amplifier Module
SKU: AI0645 ₹226.56 (₹192.00 + GST)Quick Overview:
- Operating Voltage: 3–12 VDC
- Amplification: Adjustable 1.5~1000 times
- Signal Input Voltage Range: 100µV~300mV
- Signal Output Range: 100µV~300mV
DC-DC USB 5V to 24V Boost Power Regulator Module
SKU: AI2789 ₹128.62 (₹109.00 + GST)QUICK OVERVIEW:
- Input voltage: 3.5V-12V
- Output voltage: 1.2-24V
- Easy to use, plugin USB or micro USB to output 1.2V-24V adjustable voltage.
- Turn off the output with one key.
DC-DC 1.8V-5V to 3.3V, Booster and Buck Power Modules
SKU: AI5213 ₹43.90 (₹37.20 + GST)- Input Voltage: 1.5V to 5V DC
- Output Voltage: 3.3V DC
- Dimensions (L x W)mm: 11 x 7
STC-3028 AC110-220 Dual Display Dual Temperature Adjustable Temperature Controller with 1M Cable
SKU: AI4247 ₹953.44 (₹808.00 + GST)QUICK OVERVIEW:
- Model: STC-3008
- Optional Voltage: AC110-220
- Temperature Control Range: 0 ~ 100 ° C
- Screen Display: Dual Screen Dual Display
- Sensor: 1 x NTC Sensor (line length is about 1 meter)
2Pin Round Pushbutton SPST Straight Tactile Micro Switch Through Hole (Pack of 5)
SKU: AI0708 ₹10.38 (₹8.80 + GST)Quick Overview
- Bounce Time: 10 msec.
- SPST momentary ON
- Contact Resistance: 100mohm
- Lead type: PC
- Rating: DC 12V 50mA
- Operating Force: 160±30 or 250±50gf
- Travel: 0.3±0.15mm
0.28inch 0-100V Three Wire DC Voltmeter Red
SKU: AI2313 ₹61.36 (₹52.00 + GST)Measuring Range: 0-100 VDC
It is a 3-wire display.
LED Color: RED
Current Consumption : < 10 mA.
Accuracy: 0.1 V.
Refresh Speed: Approx 200mS/time.
Measure accurately up to 3.6 V.
12V-24V 8A Adjustable Dimmer Switch For Single LED Strip
SKU: AI2166 ₹119.18 (₹101.00 + GST)Quick review :
- Operating Voltage: 12 – 24VDC
- Operating Current: up to 8A
- Operating Temperature: -20 to 60
- Function: Can achieve stepless dimming
DS3231 Real Time Clock Module 3.3V 5V Precise
SKU: AI0846 ₹123.90 (₹105.00 + GST)
Supply voltage(V):+3.3 to +5.5
operating temperature range:-40°C to +85°C
Supported Raspberry Pi and Arduino
Provide battery backup for continuous timing.
Two calendar alarm.
1Hz and 32.768kHz output.
ESP8266 WiFi 5V 1 Channel Relay Module
SKU: AI0352 ₹224.20 (₹190.00 + GST)Quick Overview:
- Onboard Module: ESP8266 WiFi module; in AP mode it can connect with 5 Clients at the same time
- Operating Way:
- Cellphone connected directly to the WiFi module
- Cellphone and WiFi module connected to the same router, and use the APP to control relay
- Transmission Distance: 400m (max)
- Relay: 5V, 10A / 250V AC, 10A / 30V DC
- Baud Rate: 9600
- Diode effusion protection
- Short response time
12V Dual Channel Relay Module (with Light Coupling)
SKU: AI0335 ₹96.76 (₹82.00 + GST)Operating Voltage: 12V DC
Two separate LEDs for On/Off indication of the Relay
Triggering input voltage 3.3V – 5V 4)
Back EMF protection
Equipped with high-current relay 10A@250VAC / 10A@30VDC
It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
Freewheeling diode to protect your microcontroller
Input Signal Pin connected to Burg stick for easy accessibility
Mounting holes provided
LM7805 5V DC / AC Three Terminal Voltage Regulator Power
SKU: AI3857 ₹102.66 (₹87.00 + GST)5V LM7805 DC/AC Three Terminal Voltage Regulator Power Supply Module Output Max 1.2A
With good peformance and high quality material, it may work for a long time.
Provide a full protection from dust, shock, scratches and bumps and other daily damage
Completely fits and works
Simple and easy, comfortable, easy to carry
PC817 4 CH Optocoupler Isolation Module
SKU: AI5214 ₹109.74 (₹93.00 + GST)- I/O Isolation for MCUs (Micro Controller Units)
- Noise Suppression in Switching Circuits
- Driving Port Signal Voltage: 3.6-24V
- Output Port Voltage Port: 3.6-30V
- Output Can Be Switched From Pull-Up or Pull-Down With Jumpers.
Tiny RTC Real Time Clock DS1307 I2C IIC Module for Arduino
SKU: AI3431 ₹39.65 (₹33.60 + GST)- Operating Voltage: 5V
- Two wire I2C interface
- Hour: Minutes: Seconds AM/PM
- Leap year compensation
- Accurate calendar up to the year 2100
- Consumes Less than 500nA in Battery-Backup
USB To 3.5mm Mic and Headphone Jack Stereo Headset Audio Adapter USB Sound Card 7.1
SKU: AI3491 ₹87.32 (₹74.00 + GST)QUICK OVERVIEW:
- One male USB plug
- Two 3.5mm (3-position) Female Jacks (1 for the mic, 1 for headset)
- Specifically for mic-capable headphones
- Convenient tangle-free flat cable design
- Allows the use of older audio accessories with newer computers
- Can be used with any device which uses USB portable devices
XH-M131 DC 12V Light Control Switch Photoresistor Relay Module
SKU: AI2770 ₹113.28 (₹96.00 + GST)QUICK OVERVIEW:
- Material – Steel, Plastic, PVC
- Power Supply – DC 12V
- Operating Current – Before the relay actuation: less than 5mA
Relay after pull-in: 5V module is less than 50mA - Switching Voltage: 250VAC@10A; 30VDC@10A
DS3231 AT24C32 IIC Module Precision RTC Module （without battery)
SKU: AI4129 ₹148.68 (₹126.00 + GST)FEATURES:
- Timekeeping Accuracy ±5ppm (±0.432 Second/Day) from -45°C to +85°C
- Two-wire serial interface (I2C)
- Input Voltage: 5V
- Battery Backup for Continuous Timekeeping
- Two Time-of-Day Alarms
- Digital Temp Sensor with ±3°C Accuracy
I2C Bi-Directional Logic Level Converter- 2 Channel
SKU: AI1582 ₹18.05 (₹15.30 + GST)- Dimensions: 11×15 x 2 (L x W x H) mm
- Weight: 1gm
- Mutual transform between 5V TTL and 3.3V TTL
- Two channels of logic and high voltage low voltage logic can two-way transform
- Portable and lightness, with 2 rows 4 pin contact pins
1 channel 5V 30A Relay Module Power Failure Relay
SKU: AI0663 ₹141.60 (₹120.00 + GST)Quick Overview
- Trigger Voltage: 5VDC
- Switching Voltage: 250VAC@30A; 30VDC@30A
- The module can be set high level or low-level trigger by the jumper
Dual Led 0.28 ” Display for DC0-100V 100A Voltage and Current Test Digital Instrument, Digital Meter Panel Amplifier Red Blue 100A
SKU: AI3247 ₹145.14 (₹123.00 + GST)QUICK OVERVIEW: Dual Led 0.28 ” Display for DC0-100V 100A Voltage and Current Test Digital Instrument, Digital Meter Panel Amplifier Red Blue 100A
- Operating current: 20mA
- Operating voltage: DC 4.5 ~ 30V
- Minimum resolution(V): 0.1V
- Minimum resolution(A): 0.01A
- Display color: Red and Blue (two-color display)
- Measure accuracy: 1%
DC-DC DC8-55V to 12V 2A Step Down Buck Module Regulated Power Supply Module 2A High Current Circuit Board
SKU: AI2164 ₹169.92 (₹144.00 + GST)Quick review:
- Model type: DC-DC Step Down Power Supply Module
- Size: 26 x 17.2mm
- Input voltage: 8-55V
- Output voltage: 12V
- Dissipation Power: 2A
TDA7297 Dual Audio Amplifier Module
SKU: AI1152 ₹205.32 (₹174.00 + GST)
Original TDA7297 core technology
Easy Plug and Play Operation
Dynamic operating Voltage Range: 8 to 16V
High fidelity Dual 15W output.
CH340C WIFI Module Adapter Download Debug for ESP8266 ESP-01/01S
SKU: AI0753 ₹138.06 (₹117.00 + GST)
KWS-V20 USB Current Voltmeter USB Tester
SKU: AI3758 ₹220.66 (₹187.00 + GST)Model: KWS-V20 USB Tester
Voltage (Input/Output): 4V – 20V
Current (Input/Output): 0A – 3A
Display: LCD screen with backlight
Time: 0-99H
Test Capacity Range: 0 – 99999mAh
Accuracy: ±1 percent
0.1-2000mhz RF Wideband Amplifier Gain 30db Low-Noise Amplifier LNA Board Module
SKU: AI1515 ₹435.42 (₹369.00 + GST)Operating frequency: 0.1-2000MHz
Amplifier gain:
F=0.1MHz, gain=32dB
F=500Mhz, gain=31dB
F=1000MHz, gain=29dB
F=1500Mhz, gain=25dB
F=2000MHz, gain=20dB
24V 4-Channel Relay Module (with Light Coupling)
SKU: AI0322 ₹187.62 (₹159.00 + GST)Operating Voltage: 24V DC
Two separate LEDs for On/Off indication of the Relay
Triggering input voltage 3.3V – 5V 4)
Back EMF protection
Equipped with high-current relay 10A@250VAC / 10A@30VDC
It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
Freewheeling diode to protect your microcontroller
Input Signal Pin connected to Burg stick for easy accessibility
Mounting holes provided
Free Shipping
On orders above ₹999
COD Available
Min. order ₹250 for COD
GST Invoice
Available on all orders
1,50,000+ Orders
Delivered across India
Expert Support
Toll Free: 1800 209 0998
Product categories
- Show All Categories
- 3D Printers and Parts (379)
- Batteries, Chargers and Accessories (811)
- Clearance Sale (0)
- Development Boards (438)
- DIY Learning and Robot Kits (117)
- Drone Parts (1364)
- EBike parts (140)
- Electronic Components (783)
- Electronic Modules and Displays (1201)
- FPV Freestyle Mid/High KV Drone Motors (0)
- IoT and Wireless (544)
- Mechanical Parts and Workbench Tools (241)
- Motors & Drivers & Pumps & Actuators (583)
- Sensor Modules (639)
- Electronic Modules and Displays (1201)
- Character LCD Displays (2)
- Display modules (265)
- Electronic Modules (755)
- Measuring Instruments (102)
- Power Supply (62)
- Signal Generator Module & Oscilloscopes (17)