QUICK OVERVIEW:
QUICK OVERVIEW:
QUICK OVERVIEW:
QUICK OVERVIEW:
QUICK OVERVIEW:
QUICK OVERVIEW:
| arget: | H2S |
| Model: | MQ136 |
| Detection range: | 1-200ppm |
| Detection principle: | Semiconductor |
| Characteristics: | Good sensitivity to H2S |
| Size: | φ19×24.2 |
| Working conditions: | Loop Voltage:5±0.1V Heater Voltage:5±0.1V Heater consumption:≤950mW |
Has a signal output instruction
When the output valid signal is high, the light goes out.
The sensitivity is adjustable (fine-tuning)
The wide detection range of vibration, no direction
With mounting holes, firmware installation is flexible and convenient.
MH-Z19C NDIR Infrared Carbon Dioxide Sensor Module:
QUICK OVERVIEW:
QUICK OVERVIEW:
Digital module with an optical sensor, with a gap of 6 mm. The module has a built-in comparator, because of this, the output is a digital signal. Supply voltage is from 3.3 V to 5 V. Together with the disc of the encoder, it can be used as a device counting the pulses, etc. The
Supply voltage: 5-18V DC
Signal voltage: 4.7V (with 5V DC power supply)
Connector: JST-SM 3p female
Pulse frequency per L/min: 11Hz*
Duty cycle pulse: 50%±10%
Measuring range: 1-25L/min
(1)Product name :Brass flow sensor
(2)material : Brass Plastic Flow Sensor
(3)size : 65.5X 21 mm
(4) Thread Connection: male G1/2 “-male G1/2 ”
(5):Mounting Position: Horizontal & Vertical
(6)Color: Brass golden
(7)Item No.: YF-B7
(8) Application: Water heater, broiler and heat pump …etc.
Operating Voltage: 3-5.5V
Supply Current: ≥ 20mA
Optimal Sensing Distance: 3mm
Working voltage of 5V, the output of the black line low, white line of high output
Uses Infrared Light to Detect Anti-Interference Ability
Sensors to adopt TCRT5000 High Sensitivity, Stable Performance
Exquisite workmanship, with the indicator
Has a fixed bolt hole for easy installation
QUICK OVERVIEW
Color BLUE
name YHDC
part number SCT013
Model number SCT013 50A/1V
Model: YF-S201C
Color: Transparent
Minimum working voltage: DC4.5
Maximum working current: 15mA (DC 5V)
Temperature: -25℃~+80℃
QUICK OVERVIEW:
High-quality photosensitive sensor module/light module designed for Arduino applications.
The photoresistor resistance is typically less than 80Ω under full light conditions.
In complete darkness, the dark resistance exceeds 20MΩ, ensuring reliable light detection.
Operating Voltage: 5-24V/DC
Number of Blows: 400 Blows
Detection Technology: Optical Sensor
Electrical Response Frequency: 20K/s
QUICK OVERVIEW: SCT-013-025 Non-invasive Split Core Current Transformer AC current sensor 25A
Specification:
Specification:
Flow Rate: 1~25 L/min
Flow Pulse: F= 11 *Q ± 5% , Q=L/min
Working Voltage:DC5V ~ 12V
Working Current: 15mA
Suffering Pressure: Max 1.5Mpa
Working Temperature: -40 °C ~+80 °C,
Min Insulation Resistance:100M Ohm
Output Pulse Duty Cycle: 50% +/- 10%
Max output Pulse Voltage: >DC4.7V ( input voltage DC5V)
Min Output Pulse Voltage :<DC0.5V ( input voltage DC5V)
Sensor : Hall effect sensor, Digital Output.
QUICK OVERVIEW:
QUICK OVERVIEW
QUICK OVERVIEW:
This is a high sensitivity digital ambient light sensor module based on TSL25911, features 600M:1 wide dynamic range, detects light intensity up to 88000Lux, controlled via I2C interface, low power consumption. It is capable of operating across various light environment. Digital light intensity sensor from Waveshare. The module is based on TSL25911 chip, which enables
QUICK OVERVIEW:
QUICK OVERBIEW:
| Supply voltage (V) | -0.3 ~+7 |
| Operating supply voltage (V) | 5 |
| Operating current (Max) | 90mA |
| Output mode | PWM pulse width modulation |
| Sensitivity | 15,000 / 283ml |
| Operating Temperature (C) | -10 ~ +65 |
| Storage temperature (C) | -20 ~ +80 |
| Settling time | Approximately 1 minute after the heater is switched on |
QUICK OVERVIEW
QUICK OVERVIEW:
Voltage: 5V
The photo interruption module triggers a signal whenever the light is blocked between the opening of the sensor.
Knob in the form of an encoder with a button that allows you to create a simple user interface. The module sends a digital signal on the SIA and SIB pins, depending on the direction of rotation. It works with voltages from 3 V to 5.3 V. The sensor has a 5 pin connector with
Detection depth: 48mm
Power: 2.0V ~ 5.0V
Dimension: 19.0mm * 63.0mm
Mounting holes size: 2.0mm
Water Flow Sensor (Sea) YF-B9 Flowmeter G3/4 2-50L/min 5-24V:
QUICK OVERVIEW:
MQ-131 Ozone Gas Detector Sensor Module WITH BLACK CAP:
Fast response characteristics
Mounting holes to facilitate fixed installation
The probe can plug design for easy testing.
Signal light indicates the output
Dual signal output (analog output, and TTL-level output)
TTL output valid signal is low; (low output signal light, can be accessed by the microcontroller IO port)
Waveshare Tracker Sensor, Infrared Line Tracking:
On orders above ₹999
Min. order ₹250 for COD
Available on all orders
Delivered across India
Toll Free: 1800 209 0998