XM-18 Temperature and Humidity Controller

Looking for Xm-18 Controller? XM-18 Temperature and Humidity Controller is available at Zbotic with fast shipping across India.

Product Description

• The XM 18 Controller is a fully automated device designed to regulate both temperature and humidity in incubators. Utilizing advanced micro-electronic technology and precision sensors, it continuously monitors and adjusts temperature and humidity levels for optimal conditions.

Features

• This device can:
  – Display the temperature, humidity and turning frequency digitally
  – Control the temperature, humidity and eggs turning automatically
  – Alarm automatically in case of emergency
  – Cool and ventilate automatically
  – Switch to a backup system if needed

Main Technical Index:

• This device can measure temperature and humidity with the following specifications:- Temperature range: 0-99℃
  – Temperature accuracy: ±0.1℃
  – Humidity range: 0-99% RH
  – Humidity accuracy: ±3% RHIt also has seven signal outputs for different functions:- Over-temperature: triggers when the temperature is too high
  – Temperature control: regulates the temperature within a set range
  – Insufficient temperature: triggers when the temperature is too low
  – Egg left-turning and egg right-turning: rotates the eggs periodically
  – Humidity control: regulates the humidity within a set range
  – Lighting: provides illumination for the eggsThe maximum output load current for each function is as follows:

  – Temperature control and insufficient temperature: ≤8A / AC220V
  – Over-temperature, egg left-turning, egg right-turning, humidity control and lighting: ≤1A / AC22

  The device can also adjust the number and duration of egg-turnings and ventilations:

  – Egg-turning cycle: 0 to 999 minutes (default is 90 minutes)
  – Egg-turning duration: 0 to 999 seconds (default is 180 seconds)
  – Ventilation cycle: 0 to 999 minutes (default is 120 minutes)
  – Ventilation duration: 0 to 999 seconds (default is 30 seconds)

  The device has a temperature sensor with a length of about 2 meters.

Working conditions:

• Working voltage: AC 160V ~ 240V, 50Hz
• Relative humidity: less than 85%
• Ambient temperature: -10 ~ 60 C

Package Includes:

• 1 x XM-18 Automatic Incubator Controller Thermostat

Tutorial:

XM-18 Temperature and Humidity Controller Overview

The XM-18 Temperature and Humidity Controller is a fully automated device designed specifically for incubators, offering precise regulation of both temperature and humidity. Using advanced micro-electronic technology and precision sensors, it continuously monitors conditions and adjusts heating, cooling, humidifying, ventilation, and egg turning to maintain optimal incubation environments.

Key Features of XM-18 Temperature and Humidity Controller

• Digital display of temperature (0–99℃ ±0.1℃), humidity (0–99% RH ±3% RH) and egg-turning frequency
• Automatic control of heating, cooling, humidification, ventilation and egg turning
• Built-in audible and visual alarm in case of temperature or humidity deviations
• Seamless switch to backup system for uninterrupted operation
• Compact micro-electronic design for reliable long-term use
• Genuine XM-18 units with fast shipping across India from Zbotic

Applications and Use Cases

• Poultry and waterfowl egg incubators for consistent hatch rates
• Commercial hatcheries requiring automated environment control
• Research laboratories studying embryonic development
• Reptile and amphibian breeding setups with precise humidity needs
• Seed germination chambers where stable moisture is critical
• Small-scale fermentation or tissue culture rooms needing humidity regulation

How to Use XM-18 Temperature and Humidity Controller

Mount the XM-18 inside your incubator, position the sensor probe near the eggs or samples, and connect the unit to mains power. Use the front-panel buttons to set target temperature, humidity and egg-turning intervals. Once parameters are confirmed, the controller will manage heating, cooling, humidification, ventilation and periodic turning automatically, while displaying real-time readings and alerting you to any out-of-range condition.

Why Buy from Zbotic?

• Genuine Products: All items sourced from authorized distributors
• Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
• Free Shipping: Free delivery on qualifying orders
• COD Available: Cash on Delivery, UPI, cards, net banking
• Technical Support: Expert help for setup and troubleshooting
• Easy Returns: Hassle-free replacement for defective products

Frequently Asked Questions

How do I set the desired temperature and humidity levels?

Press the “Temp Set” and “Hum Set” buttons on the front panel to enter adjustment mode. Use the arrow keys to increase or decrease values, then confirm each setting by pressing “OK.” The digital display will show the new targets.

What happens if the primary sensor fails?

If the XM-18 detects a sensor fault or out-of-range reading, it triggers an audible/visual alarm and automatically switches control to the built-in backup system to maintain stable conditions.

Can I adjust the egg-turning frequency?

Yes. In the menu, select the “Turn Frequency” option and set the interval in minutes or hours. The controller will rotate eggs at your chosen rate, and the display will show the current turning schedule.

Related Articles:

Sensor Fusion with Kalman Filter on Arduino: IMU Example

If you have ever built a drone, a self-balancing robot, or any motion-tracking project with an Arduino and...

Read More →

SCD41 CO2 Sensor: True CO2 Measurement for Indoor Air Quality Monitoring

Indoor air quality is a growing concern in homes, offices, schools, and factories across India. While temperature and...

Read More →

Gyroscope Sensor L3G4200D: Angular Rate Measurement Guide

The L3G4200D gyroscope sensor is a three-axis MEMS angular rate sensor from STMicroelectronics that has become a staple...

Read More →