Maximum 20A current
Operating Voltage: 5V-12V
Size: 41mm*16mm*14mm
Net Weight: 13g
QUICK OVERVIEW:
QUICK OVERVIEW:
| Connectors | DB9 Male Terminal to RS232/RS485 |
| Wire Hole Diameter | 10mm |
| Mounting Type | Positioning Nuts |
| Number of Pin | 9 |
| Number of Row | 2 |
| Color | Black |
QUICK OVERVIEW:
QUICK OVERVIEW:
Switching Power Supply Step-Down Voltage Regulator Module Introducing the Precision Isolation Power Supply Module, designed to deliver a stable 3.3V output at 600mA (2.5W), converting AC to DC seamlessly. This versatile module is ideal for powering various DIY projects compatible with 5VDC operat…
QUICK OVERVIEW:
Supply Voltage: DC 4-7V.
LED driver chip: WS2812B
Communication interface: single wire communication.
Send data at speeds of 800Kbps.
The color of the light was highly consistent.
Full-color module, Full-color soft lights a lamp strip.
Waveshare Industrial 6-Channel ESP32-S3 WiFi Relay Module:
Power Supply (V):7~36
Relay Channels:6
Contact Rating: ≤10A 250VAC/30VDC
Type: LilyPad LED
Color: Green
Quantity: 1 piece
Attachment: Snap-apart design
Integration: Large sew tabs for easy sewing into fabric
This is a 90-degree Angled extension USB Type-C connector.
It is useful for outputting the flight controller connector in case it is difficult to access
USB: Type C
Dimensions: 21x9x12mm
Wide Input voltage: 3.5V-35V
Output Voltage: 4-35V (Adjustable)
Output current: rated current 3A MAX ( Heat-sink Needed)
Conversion efficiency: Up to 92% (output voltage higher, the higher the efficiency)
Switching Frequency: 50KHz
Dual-Channel Stereo Output
Run-on 7V to 15V power Supply
32 Steps DC volume control has a +32dB to -75dB range.
40 pin QFN 6 x 6 mm package.
Much higher efficiency in terms of cost and performance than competitors’ ICs
QUICK OVERVIEW:
QUICK OVERVIEW:
6-way relay output module contact capacity is 10A 250V.
input IN1, IN2, IN3, IN4, IN5, IN6 signal, a low level is effective.
Using single-chip design, reliable performance, strong anti-interference, no false triggering, superior performance.
The trigger terminal has optocoupler isolation, the independent external power supply can trigger completely isolated.
Each relay has an activity indicator light. With 4 fixed bolt holes, easy installation.
Support all SCM control. It is applicable to the industrial sector, PLC control and home intelligent control.
Power supply voltage: 5V
Communication interface: RS485
Relay channels: 8
Contact form: 1NO 1NC
Communication protocol: Standard Modbus RTU protocol
QUICK OVERVIEW:
Has been assembled, and electrical test passed.
Operating Voltage: 5V
Operating Current: 12.5mA
Maximum Load: 2A @ 240VAC
Input control signal voltage:
0-2.5V status low level, relay OFF
3-5V status high level, relay ON
Overview
Supply Voltage: DC 5V
Quiescent Current: 5mA
Maximum Operating Current: 190mA
Trigger Mode: High and low-level trigger
Load Voltage: DC 30V / AC250
Load Current: 30A
Relay Life: more than 100,000 times
QUICK OVERVIEW
Maximum 20A current
Operating Voltage: 5V-12V
Size: 41mm*16mm*14mm
Net Weight: 13g
QUICK OVERVIEW:
QUICK OVERVIEW:
M0 series 32-bit ARM processor
Protection: built-in 1.5KV electromagnetic isolation
Interface: 3.3V TTL
Supported protocols: IP, TCP, UDP, ARP, ICMP, DHCP, DNS, HTTPD Client
Support DHCP, DNS, AUTO MDI/MDIX, User-defined MAC address
Provide(socket), VB, C++, Delphi, Android, IOS
Operating Voltage: 12V DC
Equipped with high-current relay [email protected] / [email protected]
It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
Freewheeling diode to protect your microcontroller
Input Signal Pin connected to Burg stick for easy accessibility
LED Status indicators to indicate the relay ON/OFF status
Mounting holes provided
On orders above ₹999
Min. order ₹250 for COD
Available on all orders
Delivered across India
Toll Free: 1800 209 0998