M0 series 32-bit ARM processor
Protection: built-in 1.5KV electromagnetic isolation
Interface: 3.3V TTL
Supported protocols: IP, TCP, UDP, ARP, ICMP, DHCP, DNS, HTTPD Client
Support DHCP, DNS, AUTO MDI/MDIX, User-defined MAC address
Provide(socket), VB, C++, Delphi, Android, IOS
QUICK OVERVIEW:
Input voltage: 2V-5V
Maximum current: 600mA
Output voltage: 5V
Maximum efficiency: 75%
Operating Voltage: 12V DC
Equipped with high-current relay [email protected] / [email protected]
It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
Freewheeling diode to protect your microcontroller
Input Signal Pin connected to Burg stick for easy accessibility
LED Status indicators to indicate the relay ON/OFF status
Mounting holes provided
Product Name:4 Bit ModbusRTU Relay Module
Working Voltage:DC 12V
Working Current:1A
Work Temperature:-25℃~85℃
Work Humidity:5%~95%RH
Size:78*78*20mm
QUICK OVERVIEW:
QUICK OVERVIEW
QUICK OVERVIEW:
Outer Diameter: 18mm
PCB Thickness: Thin 0.8mm
Input Voltage: 220VAC
Output Voltage: 524VDC.
Output Power: 5W.
Output overload and short circuit protection.
Overview
QUICK OVERVIEW:
Specification:
QUICK OVERVIEW:
Part Number: G3MB-202P
Power supply:12VDC/160mA
Switching Voltage (VAC):240@2A
Isolation: Phototriac
On-board Chip: MAX485
Communication protocol: Modbus RTU protocol
Communication interface: Support RS485 / TTL UART interface
Operating Voltage: 5VDC
No. of Channel: 4
Voltage version: 12V
The static current: 5mA
Working current: 190mA
Trigger current: 2-4mA
The module can be set high-level or low-level trigger by the jumper
The rated current of the interface is 16A
Part Number: H3MB-052DP
Power supply:3-24VDC/160mA
Switching Voltage (VAC):50@2A
Isolation: Phototriac
QUICK OVERVIEW:
This 1 Channel 12V Relay Module is capable of actuating 240VAC/30A circuits safely – Eliminating dangers of high current circuits for users.
Operating Voltage – 12VDC Max Current Control – 30A Max Voltage Control (AC) – 240V Max Voltage Control (DC) – 30V
Output Modes – Normally Open / Normally Closed Dimensions – 40 x 34 x 22mm Weight – 35g
Despite being able to actuate high current and high voltage circuits, the relay itself operates on up to 12VDC, which is safe for users if a fault occurs.
Without a relay, if the high current circuit were to leak directly into a user, it could cause serious harm to a user and damage to the components.
Part Number: G3MB-202P
Power supply: 3-24VDC/160mA
Switching Voltage (VAC): 240@2A
Isolation: Phototriac
LED Type: 5050 SMD RGB
Length: 5 meters per roll
Power Consumption: 22.5 Watts
Operating Voltage: 12VDC
Controller Compatibility: Compatible with RGB LED controllers (not included)
Lifespan: Over 40,000 hours
Waterproof: Yes
Chipset: FT232RL
Output Voltage: 5V
Connector Type: USB Type-A male to 6-way SIL, 0.1″ connector
TTL Levels: 3.3V
USB Compatibility: USB 2.0 full speed compatible
Cable Length: 1.0m
Data Transfer Rate: Up to 3 M baud
Quick Overview:
2 Channel relay
ESP8266 12F WiFi module Inbuild
Power Supply:5-80 V
Switching Voltage (VAC):250@10A
Switching Voltage (VDC):30@10A
QUICK OVERVIEW:
QUICK OVERVIEW:
QUICK OVERVIEW: AC90-250V ESP8266, Wireless WIFI Relay, Module 4 Channel ESP-, 12F Wifi Development, Board AC/DC 5V/7-28V/5-, 80V Power Supply
QUICK OVERVIEW:
On orders above ₹999
Min. order ₹250 for COD
Available on all orders
Delivered across India
Toll Free: 1800 209 0998