QUICK OVERVIEW
Chip: NE555, CD4017
LED Quantity: 10pcs
LED Color: Red
Voltage: 2.5V – 14.5V
PCB Size: 54mm x 21mm
PCB Thickness: 1.6mm.
Built-in Industrial Micro-Controller
Big LCD Display
All Adjustable Parameters
Full 4 Stage PWM Charge Management
Support MP3 format, playing power on automatically.
When mp3 is played the red LED flashes.
Support U disk (test 32G), TF Card (test 16G) play mode; power on default.
Buttons can be adjusted up and down to control songs, volume up and down, pause or play, mode switching.
Press menu button enter the single / all song play mode.
Size: 0.96 inch
Resolution: 128 x 64
Controlling Chip: SSH1106
Display Area: 21.74 x 10.86mm
Driving Voltage: 3.3-5V
Operating Temperature: -40~70 degrees Celsius
Interface Type: IIC
Light Color: White
QUICK OVERVIEW:
QUICK OVERVIEW:
Supply Voltage: 5V.
Viewing angle: 120 degrees
The color of the light was highly consistent
Full-color module, Full-color soft lights a lamp strip.
Built-in electric reset circuit and power lost reset circuit.
Each pixel of the three primary colors can achieve 256 brightness levels, or 16M colors full-color display, and scan frequency not less than 400Hz/s.
Trigger voltage: 5VDC
Trigger current: 2mA
Switching Voltage: 240VAC@2A
Triggering: Low-level
QUICK OVERVIEW:
Operating Voltage: 3.7 – 5VDC
SNR: 90dB
Support Profile: A2DP / AVCTP / AVDTP / AVRCP / HFP
Brand new and high quality
Included USB transceiver, without external circuit device
With 3.3V and 5V dual power output
With three LEDs: power indicator, data reception indicator, the data transmission indicator, working status
Meets the USB2.0 specification requirements
With self-recovery fuse. In the event of the accidental short circuit, it can effectively protect your computer USB port and Downloader
Asynchronous serial data bus compatible with all handshake and modulation controller interface signals
The supported data format is 8 data bits, 1 stop bit and parity bits
QUICK OVERVIEW:
QUICK OVERVIEW
QUICK OVERVIEW: Dual Led 0.28 ” Display for DC0-100V 100A Voltage and Current Test Digital Instrument, Digital Meter Panel Amplifier Red Blue 100A
QUICK OVERVIEW:
1.3 TFT LCD with wide ±80° viewing angle.
RGB Full color display
240 x 240 high resolution 260PPI display
SPI interface w/out CS pin
ST7789 LCD display controller
3.3 operation
QUICK OVERVIEW:
Specification:
57mm Round Large Single Test Hook Clip Test Probe (Red)
Type: NC 108 Round
Total Length: 57mm
Single Test Hook
Color: Red
Weight: 0.006 kg
Dimensions: 6 × 4 × 1 cm
Measuring Range: 0-100 VDC
It is a 3-wire display.
LED Color: RED
Current Consumption : < 10 mA.
Accuracy: 0.1 V.
Refresh Speed: Approx 200mS/time.
Measure accurately up to 3.6 V.
Quick review :
QUICK OVERVIEW:
QUICK OVERVIEW:
AC input: AC 85-265V
AC frequency: 50HZ/60HZ
Output voltage: DC 24V
Output Current: 4A-6A
Output Power: 100W.
Modulation: Pulse width modulation
Operating Voltage: 12V DC
Two separate LEDs for On/Off indication of the Relay
Triggering input voltage 3.3V – 5V 4)
Back EMF protection
Equipped with high-current relay 10A@250VAC / 10A@30VDC
It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
Freewheeling diode to protect your microcontroller
Input Signal Pin connected to Burg stick for easy accessibility
Mounting holes provided
Logical light indication: a small light indicate CHO electrical level.
Input feature: 5PF,100K Ohm.
USB power supply; USB logic analyzer for monitoring, analyzing and debugging digital circuits
8-Channels USB logic analyzer with a 24Mhz sampling frequency
Can analyze UART, IIC, and SPI, etc automatically
Great for MCU, ARM system and FPGA development
Voltage: 0-5.5V
QUICK OVERVIEW:
FEATURES:
Operating Voltage: 5V DC.
Current Consumption: <60mA
Testing Voltage: 0-100V
Testing Current: 1-100A
Easy to read even in dim light
Operating Voltage: 0-100 VDC
It is a 3-wire display.
LED Color: Green
Current Consumption: <40 mA
Accuracy: 0.1 V.
Refresh Speed : Approx 200mS/time.
The display on Voltage: 3 V.(but not measure accurately up to 3.6V).
Quick review:
Original TDA7297 core technology
Easy Plug and Play Operation
Dynamic operating Voltage Range: 8 to 16V
High fidelity Dual 15W output.
Model: KWS-V20 USB Tester
Voltage (Input/Output): 4V – 20V
Current (Input/Output): 0A – 3A
Display: LCD screen with backlight
Time: 0-99H
Test Capacity Range: 0 – 99999mAh
Accuracy: ±1 percent
MODEL NO:2004A v1.5
QUICK OVERVIEW:
Operating Voltage: 24V DC
Two separate LEDs for On/Off indication of the Relay
Triggering input voltage 3.3V – 5V 4)
Back EMF protection
Equipped with high-current relay 10A@250VAC / 10A@30VDC
It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
Freewheeling diode to protect your microcontroller
Input Signal Pin connected to Burg stick for easy accessibility
Mounting holes provided
QUICK OVERVIEW:
Working voltage: DC 7V-40V
Operating frequency 500Hz-100kHz (adjustable R6)
Maximum output current: 250mA
Output voltage: DC 5V
Size: 26 x 23mm
QUICK OVERVIEW:
Input Voltage Range: DC 3.2V to 35V
Output Voltage Range: DC 1.25V to 30V
Maximum Output Current: 3A
Maximum Efficiency: 92%
Input/Output Connection Protection: Guards against reverse polarity
Charge Adjustment Rate: Less than 1% (measured with 12V input, 5V output, 1A current)
Conversion range: 0% -100% PWM to 0-10v voltage
PWM signal reception frequency range: 1KHz – 3KHz
Operating voltage: 12V – 30V DC
Allowable error: 5%
Type: LM2596 DC Power Supply Step-down Module
– Input: 5-60V
– Output: 1.25-26V
– Output max current: 3A
– Continuous operating current: 1.2A (output power within 20W)
QUICK OVERVIEW:
On orders above ₹999
Min. order ₹250 for COD
Available on all orders
Delivered across India
Toll Free: 1800 209 0998