1800W 40A DC to DC Adjustable Constant Voltage and Current Power Supply Boost converter Module
This non-isolated DC power converter module boasts high power and stable output, converting 10-60V DC to 12-97V DC. Its high-quality components guarantee a conversion efficiency of up to 97%. It features an intelligent temperature control fan that activates automatically at approximately 60℃ and deactivates when the temperature falls below this threshold. The module is extensively utilized in applications such as high-power solar street lamp driving, diverse LED lighting CV driving, vehicle-mounted and portable device power supplies, DIY adjustable CV &CC power supplies, solar power charging, and various battery charging processes.
Features:
- It is boost converter module
- The MLCC ceramic capacitor is added to the input and output, and the output ripple is significantly reduced, which is about 100mV at 48V to 72V 4A
- With airfoil-type heat dissipation, the heat dissipation effect is very good, and the output power is even greater (the power of the 48V input and fan can reach around 1800W). The 100V 210A TO-247 large package power tube has a large power margin and good dynamic response
- Temperature-controlled fans, with hydraulic bearing fans, have a very good balance between noise and heat dissipation. When the load is light, the fan does not rotate. After the temperature of the load reaches approximately 60 degrees, the fan automatically turns. Reduce noise and extend life
- Undervoltage protection is adjustable, which can effectively protect a variety of batteries and can also be used for solar cells
- Output Current: 35A MAX,
- Over 15A replace existing heatsink with bigger heatsink and fan to enhance heat dissipation
- Related to the input and output voltage difference, the greater the voltage difference is, the smaller the output current will be
- Constant Range: (potentiometer) 0.8-28A(+/-0.3A)
- Output Power: Input voltage * load current (less 5% loss due to efficiency)
- Working temperature: -40 to + 85 degrees (ambient temperature is too high, please enhance heat dissipation)
- Operating frequency: 150KHz
- Conversion efficiency: up to 93 to 897%
- Overcurrent protection: Yes (with reduced flow adjustment, adjustable output current limit, currently exceeds the current limit, the output current is automatically reduced to a minimum 5A, vary according to the nature of the load current.)
- Short circuit protection: Yes, 3 20A fuses are connected in parallel, which can protect the risk of accidental short circuit of output.
- Input reverse polarity protection Reverse Input Protection: Yes (150A power MOS reverse protection)
- Input Low Voltage Protection: Yes (10V-50V adjustable, self-recovery)
- Input Over Current Protection: Yes (automatically protect when input is more than 40A, and power supply voltage will not increase)
- Reverse Input Protection: Yes (150A power MOS tube, can be connected reversely for a long time)
- Output Counter filling: Yes, for charging blocking the diode is not required.
- Installation Hole: Four 3mm screws
- Connection Type: Solderless terminals output
- Module dimensions (L x W x H) : 130x52x80
- Weight 419 g
Specifications:
| Input Voltage (V) | 8 to 60V |
|---|---|
| Output Voltage(V) | 12 – 97 |
| Max. Output Current (A) | 35A |
| Connection | Solderless terminals output |
| Operating Frequency (Hz): | 150KHz |
Package Includes:
1 x 1800W 40A DC to DC Adjustable Constant Voltage and Current Power Supply Boost converter Module
4 x Silver stand off with Nuts (50mm)
Technical Specifications
| Current Rating | 40A |
|---|---|
| Power Rating | 1800W |
| Interface / Protocol | BLE |
| SKU | AI5863 |
| Weight | 0.54 kg |
| Availability | In Stock |
Applications & Use Cases
The 1800W 40A DC to DC Adjustable Constant Voltage and Current Power Supply Boost converter Module is a versatile switch mode power supply used across a wide range of applications including electronics workbench, LED lighting, industrial equipment, embedded system power, and CCTV installations.
Common use cases:
- Powering a development board or test setup
- Driving LED strip installations
- Providing regulated DC power to equipment
This product is ideal for electronics labs, makers, and system integrators.
Technical Tip: Ensure output voltage and current match your load requirements. Switching power supplies are more efficient but may introduce noise; consider linear for sensitive analog circuits.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
Tanmay Naidu (verified owner) –
Perfect 1800W 40A DC to DC Adjustable for my portable project. Battery life is better than expected.
Vaishali Das (verified owner) –
Perfect 1800W 40A DC to DC Adjustable for my portable project. Battery life is better than expected.
Rakesh Bhat (verified owner) –
Outstanding! This 1800W 40A DC to DC Adjustable supplies clean power to my sensitive circuits. No noise at all.
Ankur Menon (verified owner) –
Good quality 1800W 40A DC to DC Adjustable. Ripple is low. Suitable for most electronics projects.
Neha Shah (verified owner) –
Good quality 1800W 40A DC to DC Adjustable. Ripple is low. Suitable for most electronics projects.
Mahesh Bhatt (verified owner) –
Good 1800W 40A DC to DC Adjustable. Output is stable. Gets slightly warm under full load but nothing concerning.
Ishan Bisht –
Bought multiple units of this 1800W 40A DC to DC Adjustable. All consistent quality. Zbotic is reliable.
Shruti Gill (verified owner) –
This 1800W 40A DC to DC Adjustable performs flawlessly. Voltage regulation is precise and consistent.
Kabir Deshpande (verified owner) –
This 1800W 40A DC to DC Adjustable is reliable and efficient. Running my IoT setup 24/7 with no issues.
Isha Gill (verified owner) –
Good 1800W 40A DC to DC Adjustable. Output is stable. Gets slightly warm under full load but nothing concerning.
Zubin Kapoor (verified owner) –
Excellent 1800W 40A DC to DC Adjustable! Output is stable and reliable. Perfect for my electronics project.
Kapil Bhatt (verified owner) –
Okay 1800W 40A DC to DC Adjustable. Output is slightly off from specified but within usable range.
Sahil Saini (verified owner) –
This 1800W 40A DC to DC Adjustable performs flawlessly. Voltage regulation is precise and consistent.
Dev Dhillon –
Excellent 1800W 40A DC to DC Adjustable! Output is stable and reliable. Perfect for my electronics project.
thanes.slm78 (verified owner) –
price hi
Sachin Khanna (verified owner) –
Bought multiple units of this 1800W 40A DC to DC Adjustable. All consistent quality. Zbotic is reliable.
Kunal Patil (verified owner) –
Perfect 1800W 40A DC to DC Adjustable for my portable project. Battery life is better than expected.
Shreyas Bhat (verified owner) –
This 1800W 40A DC to DC Adjustable is reliable and efficient. Running my IoT setup 24/7 with no issues.
safiqul haque (verified owner) –
urgent required
safiqul haque (verified owner) –
good
safiqul haque (verified owner) –
no comments
Kapil Nair (verified owner) –
Love this 1800W 40A DC to DC Adjustable. Compact size and excellent performance. Worth the price.
Advik Mittal –
Good quality 1800W 40A DC to DC Adjustable. Ripple is low. Suitable for most electronics projects.
Tanmay Chauhan (verified owner) –
Good quality 1800W 40A DC to DC Adjustable. Ripple is low. Suitable for most electronics projects.
Joseph (verified owner) –
it is good