It can be used with NRF24L01 wireless module
Add core nRF24L01+ Breakout Adapter with onboard 3.3V Regulator
Onboard 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached nRF24L01+ module
Allows for easy connection to nRF24L01+ modules
Small power on SMD LED indicator
Input Voltage:DC 4.5-24V
Module Size: 10 x 20 mm
Adjustable Range:0.8-17V,fixed voltage (1.8V 2.5V 3.3V 5V 9V 12V)
Output Current:3A (max),actual testing input 12V output 1.5A
Transform Efficiency:97.5%(max) (6.5 to 5V 0.7A)
Switch Frequency:500KHz
Output Ripple Wave:20mV (12V to 5V 3A) 20m band width
QUICK OVERVIEW
Main chip: NE555
Input Voltage: 5V-15V DC.
Generate an adjustable pulse for MCU.
Generate an adjustable pulse, to control circuitry associated.
Fully compliant USB 2.0 standard, backward compatible with USB1.1
Support System: Windows XP, Vista, Windows 7, Linux, MacOS, and WinCE5.0 drive
Baud Rate Range: 75bps – 115200bps, up to 6Mbps
Supports Plug, Play and hot-swap ( USB side)
Better than using CH341D chip or similar chip to support the laptop USB port.
Communication distance up to 1.2KM
QUICK OVERVIEW:
Bluetooth V4.2 version, support Bluetooth automatic connection technology,
Support WAV/WMA/FLAC/APE/MP3 lossless decoding, stereo dual channel output.
Quick review :
QUICK OVERVIEW
Better than 2596, Easy to 4A 50W
Over-Temperature Protection: Yes
Input Voltage: 4V ~ 38V
Output Voltage: 1.25V ~ 36V
Output Current: 0A ~ 5A
Operating Voltage:5V DC
Current Consumption: <60mA
Testing Voltage: 0-100V
Testing Current: 1-50A
Easy to read even in dim light
Brand: Peacefair
Model: PZEM-004T
Operating Voltage: 80-260VAC
Test Voltage: 80-260VAC
Rated Current: 100A
Rated power: 100A / 22000W
Operating frequency: 45-65Hz
Measurement accuracy: 1.0
Interface: I2C
Operating Voltage: 3-5VDC
Ports: 8-bit Parallel Ports
Can be used with Arduino and Raspberry Pi
LM358 chip onboard.
100 gain of the circuit design.
10K onboard adjustable resistance, you can adjust the magnification.
Onboard power indicator.
The chip has led major pin can be directly input and output signals.
QUICK OVERVIEW:
Wide voltage power supply (6~30V)
supports micro USB 5.0V power supply
The interface is clear and simple, powerful, easy to understand
All set parameters automatically save power.
QUICK OVERVIEW
On-board level shift circuit
Arduino UNO R3 and the compatible board can directly connect to this module;
Interface logic voltage: 3.3V / 5V compatible(On-board level shift circuit);
Working voltage: 4.5~5.5V (Onboard 3.3V LDO Regulator);
Working current: 240mA(MAX).
Input Voltage: DC3.6V-6V
Input Current: 2A-5A
Output Voltage: DC 400KV (Please pay attention to safety when used)
Input Line Length: about 100mm (red is positive)
Output Line Length: about 160mm
Size: 0.36 inch
Emitting Color: Red
Mode: Common-Anode (CA)
Digit: 4-Digit
Category: LED 7-Segment Display
Meet UL, CE requirements,
Ultra-thin, ultra-small
All voltage input (AC: 100 ~ 240V)
Low ripple and low noise
Output overload and short circuit protection
High efficiency, high power density
The product is designed to meet the requirements of the EMC and Safety Test
Low power consumption, environmental protection, no-load loss <0.1W
Channel: 1 channel
Relay Voltage: 5V
High impedance controller pin
Pull-down circuit for the avoidance of malfunction
One normally closed contact and one normally open contact
Triode drive, increasing relay coil
MODEL NO: CW-113-V1.1
Input Voltage: AC 100 – 240 V (50 HZ/60 HZ).
Output Voltage: DC 24V.
Output Current: 6A to 9A (no voltage drop).
Output Power: 150W (maximum 220 W).
Overload Protection: Yes.
Over Current Protection: Yes.
Short Circuit Protection: Yes.
5V Tolerant Inputs.
Supports Hot Insertion.
I2C Bus and SMBus Compatible.
Low Standby Current.
1-to-8 Bidirectional Translating Switches.
Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II.
Active-Low Reset Input.
Power Up With All Switch Channels Deselected.
Bluetooth version: 4.2
Supply current: 1A
Power supply voltage: 5V
Max. Audio Output Power: 10W
No soldering Required on Module
Quick Overview:
Input Voltage: AC 220V
Maximum Power Handling: 4000W
Control Method: Thyristor SCR (Silicon Controlled Rectifier)
Compatibility: Suitable for controlling various 220V appliances
Usage: Light dimming, fan speed control, stove temperature regulation, etc.
Adjustment Range: Output voltage adjustable between 0 – 220 volts
Brings all 9 pins of a DB9 connector to screw terminal blocks
Adapter used for communication debug
9 pcs signal line was all lead out, name and number clearly labeled;
All-copper DR9 seat, anti-oxidation, better contact;
Military board, three anti-paint sprays an entire board, corrosion-resistant;
Terminal spacing 3.96MM, screw hole diameter 2MM, need to use a width of 2MM screwdriver for assembly;
Use of environmentally friendly copper terminals, through IS0-9001.
Product: Test Hook Clip
Color: Black
Total Length: 43mm
Overall Length: Approx. 1.7 inch / 4.2 cm
Easy to use.
QUICK OVERVIEW:
QUICK OVERVIEW:
On orders above ₹999
Min. order ₹250 for COD
Available on all orders
Delivered across India
Toll Free: 1800 209 0998