LilyPad Tri-Color LED RGB Module for Arduino
SKU: AI0736 ₹61.36 (₹52.00 + GST)Quick Overview
- Tri-Color LED Board
- Wearable e-textile technology.
- Washable
XH-M542 Single Channel High Power Digital Audio Power Amplifier Board TPA3116D2
SKU: AI2778 ₹293.82 (₹249.00 + GST)QUICK OVERVIEW:
- Original TPA3116D2 core technology
- Easy Plug and Play Operation
- Dynamic operating Voltage Range: 12 to 24V
- High fidelity 100W output.
Serial Port Mini RS232 to TTL Converter Adaptor Module Board MAX3232(Pack of 2)
SKU: AI1444 ₹39.53 (₹33.50 + GST)QUICK OVERVIEW
- High speed, replaceable MAX232 based. The device fitted supports up to 120kbps
- Works with PCs or Laptops
- Supports microcontroller UARTs – 5V TTL signal levels.
- Single DC supply: wide input range for 4201 or 5V for 4202 and 4203
- Small PCB footprint of 50´40mm
- Low current status LED(s)
- Very low power consumption
4 Road/Channel Relay Module 12V (with light coupling)
SKU: AI0323 ₹258.42 (₹219.00 + GST)Quick Overview:
- Operating Voltage: 12V DC
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc.
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- LED Status indicators to indicate the relay ON/OFF status
- Mounting holes provided
1 Channel 5V Relay Module Solid State High Level SSR DC Control 250V 2A with Resistive Fuse
SKU: AI2970 ₹142.78 (₹121.00 + GST)QUICK OVERVIEW;
- Part Number: G3MB-202P
- Power supply:5VDC/160mA
- Switching Voltage (VAC):240@2A
- Isolation: Phototriac
24V-12V 9V to 5V Fixed Output,3A Power Step-Down Adjustable Module（Chip is MP1584EN）
SKU: AI2981 ₹101.48 (₹86.00 + GST)
Input Voltage: 24V-12V
Output Voltage: 0.8V – 20V
Output Voltage Adjustment: On-board potentiometer
Output Current: 1.8A (typical), 3.0A (max).
Ceramic Capacitor Stable
Internal Soft-Start
Internally Set Current Limit without a Current Sensing Resistor
Add to cart
Add to Compare
ELM327 OBD2 V2.1 Bluetooth Interface Auto Car Diagnostic Scanner
SKU: AI3448 ₹302.08 (₹256.00 + GST)QUICK OVERVIEW:
- Engine RPM
- Calculated Load Value
- Coolant Temperature
- Fuel System Status
- Vehicle Speed
- Short Term Fuel Trim
- Long Term Fuel Trim
- Intake Manifold Pressure
- Timing Advance
- Intake Air Temperature
- Air Flow Rate
- Absolute Throttle Position
- Oxygen sensor voltages/associated short term fuel trims
- Fuel System status
- Fuel Pressure
W25Q128 Large Capacity Flash Storage Module
SKU: AI6310 ₹152.22 (₹129.00 + GST)- Using serial Nor flash external expansion memory chip W25Q128.
- Operating Voltage: 2.7-3.6V
- Support the SPI interface.
- Capacity: 128M-bit / 16M-byte
- Clock Frequency: ≤ 104MHz
MINI560 DC-DC 9V 5A Step-Down Stabilized Voltage Source Module Note:SMD Resistance Marked 16C Represents 9V
SKU: AI3030 ₹95.58 (₹81.00 + GST)
Switching Frequency: 500KHz
Input Voltage: 9 Volts
Output Voltage: 5 Volts
Module Nature: Non-isolated step-down
External Dimensions: 29185.4mm (lengthwidthheight)
Color: Output 5V
Add to cart
Add to Compare
WS2812 LilyPad RGB LED Module for Arduino
SKU: AI0737 ₹38.00 (₹32.20 + GST)Quick Overview
- Wearable e-textile technology.
- Washable
- Equipped with a WS2812
48V36V24V to 19V12V9V5V3V Adjustable Synchronous Stepdown Module / Car Charging Power Supply
SKU: AI2387QUICK OVERVIEW:
- Input Voltage: 6.5V-60V
- Output Voltage: 1.25-30V
- Adjustable Efficiency: 97% (MAX)
- Load capacity: large 10A
- Wiring method: the terminal is free of soldering, IN is input, OUT is output.
TTL FTDI Transmitter USB For 3.3V/5V Dual Power FT232RL MWC Programmer
SKU: AI0729 ₹168.74 (₹143.00 + GST)USB Connector type: USB-Mini
Chip Used: FT232RL
Output Voltage 5v and 3.3v Indicator LEDs USB Connector
Automatic detection of data transfer speeds up to 1Mbps
Data exchange capability with an external interface with UART protocol
Supports Windows 8, Windows 7, Windows Vista, Windows XP, Linux, Mac OS X, Windows CE 4.2-5.2, Windows CE 6.0
DB9 RS232/485 9pin Termina Male Screw with Shell,and Nut
SKU: AI3532 ₹130.98 (₹111.00 + GST)QUICK OVERVIEW:
| Connectors | DB9 Male Terminal to RS232/RS485 |
| Wire Hole Diameter | 10mm |
| Mounting Type | Positioning Nuts |
| Number of Pin | 9 |
| Number of Row | 2 |
| Color | Black |
4×5 Matrix Array 20 Key Membrane Switch Keypad Keyboard For Arduino
SKU: AI2388 ₹107.38 (₹91.00 + GST)- 4×5 Matrix Array 20 Key Membrane Switch Keypad Keyboard For Arduino
- Operating Voltage: 12V DC
- Connector Type: 5-pin 2.54mm pitch connector
- Layout: 4×5 matrix array (20 keys)
- Lifespan: 100 million keystrokes
IRF520 MOSFET Driver Module for Arduino ARM Raspberry pi
SKU: AI2498QUICK OVERVIEW:
- Voltage: 3.3 – 5V.
- Ports: Digital Level.
- Output load voltage: 0-24 V.
- Output load current: <5A (1A above need to add heat sink).
- Platform: Arduino, MCU, ARM, raspberry pi.
- Using original IRF520 Power MOS, you can adjust the output PWM
HOT LTC3780 5~32V to 1~30V 10A Buck-Boost Converter Module with Heatsink
SKU: AI2491
QUICK OVERVIEW:
- Input voltage Range: 5V to 32V DC
- Output voltage Range: 1V to 30V ( default 12V)
- Continuous Output Current: 8A
- Maximum Output Current: 10A
1500W DC-DC 12-48V to, 24-72V Boost Step Up Converter For Car, Laptop Solar Battery
SKU: AI2345 ₹1,574.12 (₹1,334.00 + GST)Quick Overview:
- Product Name: 1500W DC-DC 12-48V to, 24-72V Boost Step Up Converter For Car, Laptop Solar Battery
- Module model: SZ-BT07CCCV-D1
- Dimensions: 130mm x 50mm x 74mm
- Input voltage: DC10-60V
- Input current:
- 10-30V input voltage, maximum current 30A
- 31-60V input voltage, maximum current 25A
- Static working current: 15mA
- Output voltage:
- 12-90V continuously adjustable (default output is adjusted to 19V)
- 12-90V fixed output
WS2812B RGB Addressable LED Module-(Pack of 10)
SKU: AI3472 ₹164.02 (₹139.00 + GST)QUICK OVERVIEW:
- Supply Voltage: 5V.
- Viewing angle: 120 degrees
- Red: (620-630nm) @ 550-700mcd
- Green: (515-530nm) @ 1100-1400mcd
- Blue: (465-475nm) @ 200-400mcd
- Built-in electric reset circuit and power lost reset circuit.
- Each pixel of the three primary colors can achieve 256 brightness levels, or 16M colors full-color display, and scan frequency not less than 400Hz/s.
Waveshare USB to RS232 / RS485 / TTL Industrial Isolated Converter
SKU: AI2034 ₹2,326.96 (₹1,972.00 + GST)QUICK OVERVIEW:
- Product type: industrial optically isolated converter
- Baudrate: 300-921600bps
- Host port: USB
- Device port: RS485/RS232/TTL
- Operating system: Windows 10 / 8.1 / 8 / 7 / XP
Serial DB9 RS232/485 9 pin Terminal Female Screw
SKU: AI3863 ₹93.22 (₹79.00 + GST)
QUICK OVERVIEW
A DB9 Female Screw Terminal to RS232 RS485 Conversion Board without cover is a connector commonly used in serial communication for connecting various devices.
Add to cart
Add to Compare
24V Cold White 5050 SMD LED Strip-5Meter
SKU: AI2833 ₹501.50 (₹425.00 + GST)
QUICK OVERVIEW:
- LED Glow Color: Cold White
- Strip Length: 5 Meter
- Operating Voltage: 24VDC
- No. of LEDs: 60LED/Meter
- Protection Level: IP20 (Not Waterproof)
Waveshare 2-CH UART To Ethernet Converter, Serial Port Transparent Transmission Module
SKU: AI1558 ₹1,178.82 (₹999.00 + GST)- M0 series 32-bit ARM processor
- Operating Mode:TCP/UDP
- UART TTL LEVEL 3.3V / 5V compatible
- Supported protocols: IP, TCP, UDP, ARP, ICMP, DHCP, DNS, HTTPD Client
- Support DHCP, DNS, AUTO MDI/MDIX, User-defined MAC address
- Provide(socket), VB, C++, Delphi, Android, IO
MINI560 DC-DC 3.3V 5A Step-Down Stabilized Voltage Source Module Note:SMD Resistance Marked 64B Represents 3.3V
SKU: AI3029 ₹75.52 (₹64.00 + GST)Input Voltage: 5V to 20V
Output Voltage: 3.3V
Maximum Output Current: 5A
Size: 30185.4mm
Switching Frequency: 500KHz
Topology: Non-isolated buck, synchronous rectification
Operating Temperature Range: -40°C to +85°C
44 Keys RGB IR Remote Controller for 12V 5050 RGB LED Strip
SKU: AI2807 ₹146.32 (₹124.00 + GST)QUICK OVERVIEW
- Supply voltage: DC 12V
- Output current: 2 A each color
- Connecting mode: common anode
- Output: Three CMOS Drain-open Output
- Number Of buttons: 44
- Working temperature: -20℃-60℃
Waveshare USB to CAN Adapter Model A, STM32 Chip Solution, Multiple Working modes, Multi-system Compatible
SKU: AI5901 ₹2,094.50 (₹1,775.00 + GST)- Data can be saved as TXT or Excel
- Supports CAN bus detection for status checking
- Sending/receiving CAN data with time scale, allows sequentially displaying
- Baud rate of USB virtual COM port is configurable in the range of 9600 ~ 2000000bps (2000000bps by default)
- Supports setting working parameters by configuration software or serial command, can be saved after power off
- Adopts STM32 chip solution, stable and reliable communication
3000W Thyristor SCR Voltage Regulator Temperature Dimmer for Speed / Light (AC 220V)
SKU: AI2374 ₹236.00 (₹200.00 + GST)Power Handling: Up to 3000W
Operating Voltage: AC 220V
Control Method: SCR Dimmer
Compatibility: Suitable for controlling various 220V appliances
Adjustment Range: 0V – 220V
Current Handling Capacity: Up to 40A
Application: Suitable for light dimming, fan speed control, stove temperature regulation, etc.
Thyristor Type: Two-way high-power thyristor
Output Voltage Adjustment: Via onboard potentiometer knob
Convenience: Equipped with potentiometers with nuts for easy adjustment, no additional components needed
Safety Feature: Built-in protection against over-current issues
CH375B USB Disk Read-write Module USB Flash Disk For Arduino
SKU: AI3423 ₹260.78 (₹221.00 + GST)QUICK OVERVIEW:
- 2×8 connector, easy with the MCU mount.
- Jumper selectable can work in parallel or serial mode.
- On board 3.3 V LDO 1117, provides 800 mA current.
- 5 V power supply is powered by the target board.
- 12 MHZ crystal.
CJMCU-MINI USB 5V/3.3V Socket USB DC Power Socket AMS1117 Module
SKU: AI0649 ₹107.38 (₹91.00 + GST)Quick Overview:
- Type: CJMCU MINI USB AMS1117
- MINI USB Interface Input: 5V
- MINI USB Outputs: 5V and 3.3V
- DC Power Socket Interface Input: 5V–12V
- DC Power Outlet Output (5V label): 5V and 3.3V
XH-M229 Desktop PC ATX Power Supply Transfer Module
SKU: AI2773 ₹191.16 (₹162.00 + GST)QUICK OVERVIEW:
- Input Connector: 24 Pin ATX motherboard Connector
- Output Connector: 4* Binding Posts
- Onboard ON/OFF switch
- Fuse for each output line
64Mbit 8MByte Data Flash module SPI Interface BV/FVinter
SKU: AI1583 ₹110.92 (₹94.00 + GST)- IC: 25Q64FVSIG-1935
- Capacity: 64M-bit / 8M-byte
- Clock frequency: <104MHz
- Working voltage: 2.7V ~ 3.6V
- Current: 4mA
- Dimensions (LxWxH): 15.5 x 14.5 x 3.7 mm
5V Active Alarm Buzzer Module for Arduino
SKU: AI5243 ₹38.94 (₹33.00 + GST)- Operating voltage 3.3V-5V
- PCB Dimensions: 29 (L) x 14 (W) x 12 mm (H)
- Wire length: 20cm
- Weight: 7 gm.
- Frequency: 2500Hz
Type-c USB 90 degree angle conversion adapter
SKU: AI4387This is a 90-degree Angled extension USB Type-C connector.
It is useful for outputting the flight controller connector in case it is difficult to access
USB: Type C
Dimensions: 21x9x12mm
MINI V2.1 ELM327 OBD2 Bluetooth Interface Auto Car Scanner
SKU: AI3447 ₹263.14 (₹223.00 + GST)- The newly developed wireless scan tool.
-
It supports most of the OBD-II protocols.
-
Bluetooth connection, no Batteries, Cables, or Switches.
-
Wireless (Bluetooth) 5~10 meter
-
Retrieve Fault Codes (DTCs) and clear Check Engine lights.
-
Clear trouble codes and turn off the MIL (“Check Engine” light)
- Set the maximum number of responses to obtain
RS485 to TTL Serial Port Converter Adapter Communication Module
SKU: AI6313 ₹106.20 (₹90.00 + GST)- RS485 to TTL Serial Port Converter Adapter Communication Module
- Model Number: RS485 CAN
- Supply Voltage: 3.3-5v
- Operating Temperature: 40°-85°
- Type: Communication module
NY-D01 40A Digital Display Spot Welding Controller Board
SKU: AI2949 ₹893.26 (₹757.00 + GST)QUICK OVERVIEW:
- Material: Plastic+Metal
- The controller is compatible with 100A SCR.
- Digital control interface, you can display the current time and current settings.
- Time input 1-50, unit cycle (1 cycles is 20ms)
5V 16 Channel Relay Module with Light Coupling LM2596S Power Supply
SKU: AI5291 ₹506.22 (₹429.00 + GST)- 5V relay with AC contact capacity of 10A 250V and optocoupler protection.
- Onboard power supply module does not need an external power supply. I / O port driver is active low.
- The module can be used as a microcontroller development board module and also as appliance control, PLC extended output.
- It is using the industry’s top -quality isolation optocouplers, strong anti-jamming ability, stable performance.
- The 1-16 road can be any full on/off or any road.
- All interfaces can be directly connected through the terminal leads, very convenient.
2 Channel 12V Relay Module Solid State High Level SSR DC Control 240V 2A with Resistive
SKU: AI3161 ₹211.22 (₹179.00 + GST)- Part Number: G3MB-202P
- Power supply:12VDC/160mA
- Switching Voltage (VAC):240@2A
- Isolation: Phototriac
Waveshare Industrial RS232/RS485 to Ethernet Converter (EU)
SKU: AI1544 ₹6,589.12 (₹5,584.00 + GST)
Communication rate: 10/100Mbps
Baudrate: 600bps~230.4Kbps
Power supply: 5.0~36.0V
Operating current: 86.5mA (@5V)
Power consumption: <1W
Add to cart
Add to Compare
DC-DC 5A Step-Down Constant Voltage Constant Current MPPT
SKU: AI3860 ₹551.06 (₹467.00 + GST)QUICK OVERVIEW:
- DIY a voltage Regulator, with constant current function, Short-circuit proof, can protect the load.
- It can power supply for electronic devices.
- For a variety of battery charge, can observe the state of charge.
- charger for all kinds of batteries, with MPPT function, can enhance the charging current to double. With a constant current and prevents battery overcharge, effective protection of the battery.
- it can support high-power LED.
- As a car power supply , it can for your cell phone or digital products supply.
TTP229 16-Way Capacitive Touch Switch Digital keypad Module
SKU: AI3419 ₹102.66 (₹87.00 + GST)
QUICK OVERVIEW:
- Working voltage: 2.4V to 5.5V
- Built-in regulator
- Two modes
- Simple 8 key mode with independent 8 Channel parallel output.
- Advanced 16 Key modes with I2C interface output.
- Modes can be selected and configured by the user.
- Adjustable sensitivity
2 x 2 Matrix 4 Push Button Keyboard Module
SKU: AI3437 ₹62.54 (₹53.00 + GST)
QUICK OVERVIEW:
- 2×2 Matrix Keyboard Module with 4 buttons
- Small in size and hence Save space
- More convenient to use
- Expanded development application modules for single chip
- With 4 keys and 4 pin
10A RC TX Controlled Relay Switch PWM Receiver
SKU: AI1255 ₹413.70 (₹394.00 + GST)- RX lead length:100mm
- Power in/out lead length:100mm (each)
- Switching load current (DC):10A (Continuous current)
- Input Voltage (DC):5-28V
SD Card Reading Writing Module for Arduino
SKU: AI2454 ₹53.10 (₹45.00 + GST)QUICK OVERVIEW:
- All SD SPI pins output, MOSI, SCK, MISO, and CS.
- Support 5V/3.3V input.
- This module can handle 2GB SD cards.
- Size:4.7 x 3.1 cm.
- LED indicator.
- SD Card Holder.
- Onboard 3.3V regulator (AMS1117-3.3) for +5v to 3.3V generation. 3.3V is also available as output.
Momentary Tactile Push Button Module DC 5V Switch
SKU: AI2539 ₹30.33 (₹25.70 + GST)
Operating Voltage: 5V
Contact Resistance : 50mΩ max (initial)
Electrically Life:100,000 cycles
Environment temperature: -25°C to +105°C
Operating Force: 180/230(±20gf)
Seal temperature:250ºC-280ºC
I/O pins: 3 pins
12V 8 Channel Relay Module
SKU: AI0336 ₹359.90 (₹305.00 + GST)Quick Overview:
- Using high-current relay, AC250V 10A DC30V 10A.
- Contact some independent wiring, safe and reliable.
- The standard interface can be extended to a variety of development boards.
- With fixed screw holes for easy installation.
- Suitable for a variety of platforms such as 8051/AVR/AVR/ARM.
24V RGB 5050 SMD LED Strip- 5Meter
SKU: AI2834 ₹475.54 (₹403.00 + GST)QUICK OVERVIEW:
- LED Glow Color: RGB
- Strip Length: 5 Meter
- Operating Voltage: 24V DC
- Strip width: 10 mm
- No. of LEDs: 60LED/Meter
- Protection Level: IP20 (Not Waterproof)
DC-DC DC8-55V to 3.3V 2A Step Down Buck Module Regulated Power Supply Module 2A High Current Circuit Board
SKU: AI2451 ₹169.92 (₹144.00 + GST)QUICK OVERVIEW:
- Model type: DC-DC Step Down Power Supply Module
- Size: 26 x 17.2mm
- Input voltage: 8-55V
- Output voltage: 3.3V
- Dissipation Power: 2A
W5100 Ethernet Module Ethernet Network Module for Arduino
SKU: AI0256 ₹1,451.40 (₹1,230.00 + GST)Quick Overview
- Support Hardwired TCP/IP Protocols: TCP, UDP, ICMP, IPv4 ARP, IGMP, PPPoE, Ethernet
- 10BaseT/100BaseTX Ethernet PHY embedded
- Auto-Negotiation (Full-duplex and half duplex)
- Support Auto MDI/MDIX
- Simultaneously Supports to 4 independent sockets
- 0.18 µm CMOS technology
- 3.3V operation with 5V I/O signal tolerance
- 8. Provide Serial Peripheral Interface (SPI MODE 0, 3) support
LilyPad Buzzer
SKU: AI0731 ₹109.74 (₹93.00 + GST)QUICK OVERVIEW
- Wearable e-textile technology.
- Available Various input, output, power, and sensor boards.
- Washable
Waveshare RS485 CAN HAT for Raspberry Pi
SKU: AI1541 ₹848.42 (₹719.00 + GST)- Operating voltage: 3.3V
- CAN controller: MCP2515
- CAN transceiver: SN65HVD230
- 485 transceiver: SP3485
- Mounting hole size: 3.0mm
LM2577 3A DC-DC Step UP LED Voltmeter 3-34 to 4-35V Adjustable Boost Converter Module
SKU: AI1014
Input voltage range : 3-34V DC
Output voltage range : 4-35v DC adjustable
Output current:3A
Voltmeter range:0 to 40V,error +-0.1v
Multiple output regulator.
One button to switch input and output voltage display.
Power-down memory function.
Press the button for 3 seconds can turn OFF/ON the LED display.
Solar Energy Step-down and Step-up Module Red
SKU: AI3543 ₹284.38 (₹241.00 + GST)
QUICK OVERVIEW:
Output Current: 12V to 5V maximum 2A (output other voltage, calculated by 15W current, formula 15 / output voltage = output current)
Output Power: maximum 15W (such as high temperature please strengthen the heat)
Add to cart
Add to Compare
Red Electronic Building Blocks Big Key Button Module High Level Output
SKU: AI3081 ₹21.24 (₹18.00 + GST)
QUICK OVERVIEW:
- Product: Red Electronic Building Blocks Big Key Button Module High Level Output
- Interface: Standard electronic block (GND, VCC, SIG)
- Working voltage: 2-5.5VDC
- Working Current: 0.55mA(MAX)
- Output: digital level (press high, release low)
- Great for DIY projects
2 Channel Relay Module 30A with Optocoupler Isolation 12V Supports High and Low Triger （with Guide Rail）
SKU: AI4134 ₹593.54 (₹503.00 + GST)
Supply Voltage: DC 12V
Quiescent Current: 5mA
Maximum Operating Current: 190mA
Trigger Mode: High and low-level trigger
Load Voltage: DC 30V / AC 250
Load Current: 30A
Relay Life: more than 100,000 times
Add to cart
Add to Compare
Type-C Input QC2.0/3.0 Decoy Module Boost Trigger Motherboard 9V 12V 20V Adjustable Power Supply
SKU: AI3060 ₹206.50 (₹175.00 + GST)- Product name: Type-C Input QC2.0/3.0 Decoy Module
- Input voltage: DC 5V
- Output voltage: 5V>9V>12V>15V>20V
- Maximum output voltage: 20v
- Maximum output current: 5A
- Working temperature: -25 ℃ ~ 85 ℃
- Working humidity: 5% ~ 95% RH
5V 8 Channels Relay Module High and Low, Triggering Optocoupler, Isolation Relay Module, PLC Signal Amplifier, Board
SKU: AI3253 ₹1,463.20 (₹1,240.00 + GST)
QUICK OVERVIEW:
- Trigger Voltage :5
- Switching Voltage (VAC) :10A 277VAC
- Switching Voltage :12A 125VAC
CJMCU-4051 74HC4051 8 Channel Analog Multiplexer/Demultiplexer Breakout Board for Arduino
SKU: AI3436 ₹95.58 (₹81.00 + GST)QUICK OVERVIEW:
- Wide Analog Input Voltage Range: +/-5V
- Low “ON” Resistance: 80 ohm (type) at Vcc = 4.5V; 70 ohm (type) at Vcc = 6.0V; 60 ohm (type) at Vcc=9.0V
- Logic Level Translation: to enable 5V to communicate with +/-5V analog signals
- Board Size: 30 x 19 mm
USB Input QC2.0/3.0 Decoy Module Boost Trigger Motherboard 9V 12V 20V Adjustable Power Supply
SKU: AI3062 ₹227.74 (₹193.00 + GST)Product name: PD2.0/3.0 decoy
Input voltage: DC 5V
Output voltage: 5V>9V>12V>15V>20V
Maximum output voltage: 20v
Maximum output current: 5A
Working temperature: -25 ℃ ~ 85 ℃
Working humidity: 5% ~ 95% RH
Waveshare FT232 USB UART Board (Type A)
SKU: AI1552 ₹835.44 (₹708.00 + GST)QUICK OVERVIEW
- Original FT232RL
- 3 power mode
- 3 LEDs: TXD LED, RXD LED, POWER LED
- Supports Mac, Linux, Android, WinCE, Windows 7/8/8.1/10
Waveshare RS485 to Ethernet Converter
SKU: AI0803 ₹2,476.82 (₹2,099.00 + GST)
Communication rate: 10/100Mbps
Baudrate: 600bps~230.4Kbps
Power supply: 5.0~7.0V (EU plug)
Operating current: 150mA (@5V)
Power consumption: <1W
10000W Original Chips Thyristor Super Power Electronic Regulator can Change Light Speed and Temperature
SKU: AI3907 ₹991.20 (₹840.00 + GST)
QUICK OVERVIEW:
Add to cart
Add to Compare
- Use voltage: AC 220V
- Maximum power: 10000W resistive load limit power, room temperature is recommended for 5000W for a long time
- Voltage regulation: 0-100% (220 volts, 100-level adjustment, non-linear)
- It is suitable for water heater heat transfer, lighting dimming, small motor speed, electric iron thermostat
- It can be used in large appliances with an electric power of less than 10,000 watts.
Serial DB9 RS232/485 9 pin Terminal Female Nut
SKU: AI3864 ₹119.18 (₹101.00 + GST)
Brings all 9 pins of a DB9 connector to screw terminal blocks
Adapter used for communication debug
9 pcs signal line was all lead out, name and number clearly labeled;
All-copper DR9 seat, anti-oxidation, better contact;
Military board, three anti-paint sprays an entire board, corrosion-resistant;
Terminal spacing 3.96MM, screw hole diameter 2MM, need to use a width of 2MM screwdriver for assembly;
Use of environmentally friendly copper terminals, through IS0-9001.
Add to cart
Add to Compare
DC 12V Bluetooth 4 Channels Relay Module, Internet Smart Remote, Control Mobile Phone, Switch Wireless Relay
SKU: AI3152 ₹695.02 (₹589.00 + GST)Effective Control Distance (on open area): 10m
Operating Voltage: 12VDC
Relay Type: 12V, 10A / 250V AC, 10A / 30V DC
Relay Endurance: 100,000 cycles continuously
LM7806 6V DC / AC, Three Terminal Voltage, Regulator Power
SKU: AI2524 ₹107.38 (₹91.00 + GST)
QUICK OVERVIEW:
- Input Voltage: 9-24V DC/AC
- Output Voltage: 6V DC
- Max Current: 1.2A
Mini SD Card MP3 Sound Module For PIC Arduino WTV020-SD
SKU: AI0725 ₹141.60 (₹120.00 + GST)Supports FAT file system SD carrier
Supports playing of 4Bit ADCPM format files
Recognize the voice files automatically
Support microprocessor and key control
Audio output: 16bitDAC and PWM
Maximum voice storage: 512 voice
Operating voltage: DC 2.6 to 3.6V
Quiescent current: 16 μA (SD card is not inserted)
USB2.0 Audio Video Capture Card Adapter VHS To DVD Video Capture Converter
SKU: AI4293 ₹384.68 (₹326.00 + GST)USB2.0 Audio Video Capture Card Adapter VHS To DVD Video Capture Converter
Black Electronic Building Blocks Big Key Button Module High Level Output
SKU: AI2938 ₹37.76 (₹32.00 + GST)QUICK OVERVIEW:
- Interface: Standard electronic block (GND, VCC, SIG)
- Working voltage: 2-5.5VDC
- Working Current: 0.55mA(MAX)
- Output: digital level (press high, release low)
- Great for DIY projects
Waveshare PL2303 USB UART Board (Type C), USB To UART (TTL) Communication Module, USB-C Connector
SKU: AI1563 ₹305.62 (₹259.00 + GST)- Adopts PL2303GS new version device
- Supports windows XP/7/8/10/11/
- 3x LED indicators: TXD, RXD, PWR
Waveshare Industrial Grade Isolated RS232 to RS485 Converter (With Power Adapter)
SKU: AI6116 ₹2,053.20 (₹1,740.00 + GST)
QUICK OVERVIEW:
Add to cart
Add to Compare
- Product type: industrial-grade isolated converter
- Baudrate: 300-921600bps
- Device port: RS232/RS485 standard complaint
- 1200m transmission distance of RS485
- 15m transmission distance of RS232
Stainless Steel 1m Conductive Thread Wire for Wearable Lilypad (Pack of 5)
SKU: AI3352 ₹96.76 (₹82.00 + GST)QUICK OVERVIEW:
- Material: 12UM Stainless steel fiber
- Gram Weight: 0.2458g/m
- Strength: 2.8KGF.
- Length: 1m.
- Diameter(mm): 0.12.
- Resistance (Ω/m) : 27.
- 12m per spool (on plastic spools).
Piezo Buzzer 23mm
SKU: AI3583 ₹17.70 (₹15.00 + GST)
QUICK OVERVIEW:
Add to cart
Add to Compare
- Plate Diameter: 23mm
- Plate Material: Brass Resonant
- Frequency (kHz): 6.3 +/- .6kHz
24V 8 Channel Relay Module
SKU: AI3213 ₹416.54 (₹353.00 + GST)QUICK OVERVIEW:
- Header connector for connecting power and trigger voltage.
- LED on each channel indicates relay status.
- Screw terminal connector for easy relay output and aux power connection.
5D Rocker Joystick for Arduino, MCU, AVR Game
SKU: AI5926 ₹69.62 (₹59.00 + GST)- Supports up/down/left/right/middle with extra set and reset button
- 2V-9V wide working voltage
- The number of IO: 7
- Operating temperature: -40℃ to 85℃
- Size: 4×2.5cm
4×4 Matrix 16 Push Button Keyboard Module
SKU: AI3225 ₹74.34 (₹63.00 + GST)
QUICK OVERVIEW:
- 4×4 Matrix Keyboard Module with 16 buttons
- Small in size and hence Save space
- More convenient to use
- Expanded development application modules for single chip
- With 16 keys and 8 pin
- Keypad dimensions: 39mm x 43mm x 6mm
12V Relay Module with Automatic Delay Timer
SKU: AI2781 ₹450.76 (₹382.00 + GST)QUICK OVERVIEW:
- Operating Voltage: 12VDC
- Output Capacity: Can Control the Load within DC 30V 5A or AC 220V 5A
- Working Current: 50mA
DC-DC5-40V to 5V 1A Buck Step Down Converter Module with PIN
SKU: AI3005- Input voltage 5~40V
- Output: 5V
- Maximum output current 1A
- Efficiency: 76-90%
- Material: electronic component
4 Channel Relay Module, 30A with Optocoupler, Isolation 24V Supports, High and Low Triger
SKU: AI3146 ₹706.82 (₹599.00 + GST)- Supply Voltage: DC 24V
- Quiescent Current: 5mA
- Maximum Operating Current: 190mA
- Trigger Mode: high and low-level trigger
- Load Voltage: DC 30V / AC250
- Load Current: 30A
- Relay Life: more than 100,000 times
- Trigger Voltage Range: Low-level trigger: 0-2V relay ON; 3-5V relay OFF; High-level trigger: 3.3-5V relay ON; 0-2.5V relay OFF
24V 6 channel with light coupling relay
SKU: AI2398 ₹280.84 (₹238.00 + GST)
2V relay with AC contact capacity of 10A 250V and optocoupler protection.
The onboard power supply module does not need an external power supply. I / O port driver is active low.
The module can be used as a microcontroller development board module and also as appliance control, PLC extended output.
It is using the industry’s top-quality isolation optocouplers, strong anti-jamming ability, stable performance.
The 1-16 road can be any full-on/off or any road.
All interfaces can be directly connected through the terminal leads, very convenient.
5V/7-28V ESP8266 WIFI 8 Channel Relay Module ESP-12F Development Board
SKU: AI3251 ₹1,341.66 (₹1,137.00 + GST)QUICK OVERVIEW:
- Board size: 149*80mm
- Weight: 140g
- Power supply mode supports DC7-28V/5V
- Onboard WIFI module RST reset button
- 4M Byte Flash
Waveshare Solar Power Manager (C) Supports 3x 18650 Batteries Multi Protection Circuits
SKU: AI0877 ₹1,791.24 (₹1,518.00 + GST)
Supports MPPT (Maximum Power Point Tracking) function, maximizing the efficiency of the solar panel
Flexible battery recharging: from the solar panel as well as USB TYPE-C power adapter
Compatible with 6V~24V solar panels, DC-002 jack input or screw terminal input
Heavy Aluminium body with a stylish finish and Multi status LEDs
Batteries can be easily replaced by removing the cover.
Free Shipping
On orders above ₹999
COD Available
Min. order ₹250 for COD
GST Invoice
Available on all orders
1,50,000+ Orders
Delivered across India
Expert Support
Toll Free: 1800 209 0998
Product categories
- Show All Categories
- 3D Printers and Parts (379)
- Batteries, Chargers and Accessories (811)
- Clearance Sale (0)
- Development Boards (438)
- DIY Learning and Robot Kits (117)
- Drone Parts (1364)
- EBike parts (140)
- Electronic Components (783)
- Electronic Modules and Displays (1201)
- FPV Freestyle Mid/High KV Drone Motors (0)
- IoT and Wireless (544)
- Mechanical Parts and Workbench Tools (241)
- Motors & Drivers & Pumps & Actuators (583)
- Sensor Modules (639)
- Electronic Modules and Displays (1201)
- Character LCD Displays (2)
- Display modules (265)
- Electronic Modules (755)
- Audio Amplifier Module (51)
- Breakout Board (40)
- Buck Boost Voltage Regulators (158)
- Electronic Switches/Keypads Modules (49)
- LASER Module (12)
- LED Module (13)
- Logic Level Converter (6)
- Piezo Buzzer Module (7)
- Potentiometer Module (3)
- Relay Modules (175)
- RGB LED Strips and Drivers (36)
- RTC Module (16)
- Solar Panels and Controllers (8)
- USB Interface Module (160)
- Wearable Electronic (21)
- Measuring Instruments (102)
- Power Supply (62)
- Signal Generator Module & Oscilloscopes (17)