Has a signal output instruction
When the output valid signal is high, the light goes out.
The sensitivity is adjustable (fine-tuning)
The wide detection range of vibration, no direction
With mounting holes, firmware installation is flexible and convenient.
QUICK OVERVIEW
QUICK OVERVIEW
QUICK OVERVIEW:
Operating Voltage: 5-24V/DC
Number of Blows: 400 Blows
Detection Technology: Optical Sensor
Electrical Response Frequency: 20K/s
High-quality photosensitive sensor module/light module designed for Arduino applications.
The photoresistor resistance is typically less than 80Ω under full light conditions.
In complete darkness, the dark resistance exceeds 20MΩ, ensuring reliable light detection.
Specification:
QUICK OVERVIEW: SCT-013-025 Non-invasive Split Core Current Transformer AC current sensor 25A
QUICK OVERVIEW
QUICK OVERVIEW:
QUICK OVERBIEW:
| Supply voltage (V) | -0.3 ~+7 |
| Operating supply voltage (V) | 5 |
| Operating current (Max) | 90mA |
| Output mode | PWM pulse width modulation |
| Sensitivity | 15,000 / 283ml |
| Operating Temperature (C) | -10 ~ +65 |
| Storage temperature (C) | -20 ~ +80 |
| Settling time | Approximately 1 minute after the heater is switched on |
Voltage: 5V
The photo interruption module triggers a signal whenever the light is blocked between the opening of the sensor.
Supply voltage range from 4.75VDC to 5.25VDC.
Temperature compensated over -40°C to 125°C.
Pressure range from 0KPa to 10KPa.
The sensitivity of 450mV/kPa.
Detection depth: 48mm
Power: 2.0V ~ 5.0V
Dimension: 19.0mm * 63.0mm
Mounting holes size: 2.0mm
Water Flow Sensor (Sea) YF-B9 Flowmeter G3/4 2-50L/min 5-24V:
Fast response characteristics
Mounting holes to facilitate fixed installation
The probe can plug design for easy testing.
Signal light indicates the output
Dual signal output (analog output, and TTL-level output)
TTL output valid signal is low; (low output signal light, can be accessed by the microcontroller IO port)
MQ-131 Ozone Gas Detector Sensor Module WITH BLACK CAP:
Waveshare Tracker Sensor, Infrared Line Tracking:
Liquid Temperature: Not More Than 60C
Rated Voltage: 5V
Max Current: 10mA( 5V)
Maximum water pressure: 1.75MPa
Flow range: 1-30L/min
Connector: Male XH-3P
External Thread Diameter: G1/2
Ingress Protection Rating: IP65
Color: Black
• Detects: TVOC, CO₂, CH₂O
• Communication: UART
• Features: Sensitive, low power, compact
• Resources: Manual & examples for Raspberry Pi, Arduino, ESP32
On orders above ₹999
Min. order ₹250 for COD
Available on all orders
Delivered across India
Toll Free: 1800 209 0998