TXS0108E High Speed Full Duplex 8 Channel Logic Level Converter
SKU: AI0101 ₹48.38 (₹41.00 + GST)Quick Overview
- VCCA Voltage level: 1.2V-3.6V
- VCCB Voltage level: 1.65V-5.5V
- It can provide 3.3-5V, 1.8-3.3V level conversion
- Dimension Approx: 26.4 x 16.2 mm
- PCB Color: Blue
- 8-bit bi-directional 3.3V-5V/5V-
- 3.3V logic level converter board
- Serial communication interface compatible with UART/IIC/SPI port easily to connect
I2C ADS1115 16 Bit ADC 4 channel Module with Programmable Gain Amplifier
SKU: AI1463 ₹127.44 (₹108.00 + GST)- Wide Supply Range: 2.0v To 5.5v
- Low Current Consumption
- Continuous Mode: Only 150µa Single-shot
- Auto Shut-down
- Programmable Data Rate: 8SPS to 860SPS
- It has Internal low-drift voltage reference
1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V to 5V DC-DC Boost Converter Step-Up Module
SKU: AI0590 ₹23.25 (₹19.70 + GST)QUICK OVERVIEW
- Input voltage 0.8-3.3V output voltage 3.3V
- Maximum output current: 500 mA
- Starting voltage 0.8V, output current 10mA
- Input more than 3 v, and have spent 5V output of 400-400 mA
- Operating frequency: 150KHZ
- Typical conversion efficiency: 85%
LM386 Audio Amplifier Module
SKU: AI0604 ₹39.18 (₹33.20 + GST)Onboard LM386 Chip.
200 multiplier benefits circuit design.
On-board speaker wiring Block.
On-board 10K variable resistor, you can adjust the volume of the enlarged.
Onboard Power Indicator.
MAX4466 Electret Microphone Amplifier with Adjustable Gain Module
SKU: AI0303 ₹99.12 (₹84.00 + GST)Quick Overview
- Supply Voltage Operation: +2.4V to +5.5V.
- Versions with 5nA Complete Shutdown Available only (MAX4467/MAX4468).
- Excellent Power-Supply Rejection Ratio: 112dB.
- Excellent Common-Mode Rejection Ratio: 126dB.
- High AVOL: 125dB (RL = 100kΩ).
DC 12V Relay with Adjustable Delay Time Signal Triggering Switch Module
SKU: AI0321 ₹116.82 (₹99.00 + GST)Quick Overview:
- Module based on: NE555 chip.
- Precision Pulse Generation / Timing.
- Adjustable Duty Cycle.
- Monostable Operation.
- Standby no power consumption
- Countless Application and Information Sources.
- Time can be adjusted by a potentiometer, the default is 0-25 seconds.
- Module supplies a diode with an anti-power reverse connection.
0.96 Inch I2C/IIC 4pin OLED Display Module (Blue)
SKU: AI0263 ₹213.58 (₹181.00 + GST)Quick Overview
- Display size: 0.96″
- Resolution radio:128 x 64
- Interface modes: I2C/IIC
- Working voltage: 3.3V
- Control Chip: SSD1306
- Dimension : 2 x 2 cm
400WDC-DC High-Power Constant Voltage Constant Current Boost Power Module LED Boost Driver Laptop Battery Charging
SKU: AI3906 ₹191.16 (₹162.00 + GST)
QUICK OVERVIEW:
Add to Compare
- Super material: It is made of electronic accessories, nickel plating on surface(anti-oxidatioan), inner conductor: pure copper.it is long lasting and durable for you to use.
- Package including: 1 Pack of Constant Current Voltage Module. Moreover. The buck module has 2 heat sinks that could enhance heat dissipation. When there is a big difference between input and output voltage, please decrease power and current. With LED indicator, more stable and reliable to use.
- Input and output: Input voltage: DC8.5V-50V. Input current: 15A (MAX) over 8A, please strengthen heat dissipation. Static working current: 10mA. Output voltage: 10-60V continuously adjustable. Output current: 12A MAX, more than 7A, please strengthen heat dissipation. Constant current range: 0.2-12A. Output power: = input voltage*10A, such as: input 12V*5A=60W, input 24V*5A=120W, Input 36V*5A=180W, input 48V*5A=240W. Working temperature: -40~+85 degrees.
- High Power High Efficiency: High conversion efficiency up to 96%. High efficiency and low ripple with power indicator. In addition to the current limiting and voltage regulation function. High reliability, strong vibration resistance, good electromechanical performance.
- A wide range of applications: Widely uses in power transformer, DIY adjustable power supply, LED car display, mobile power, industrial equipment appliances, LED driver, monitor, solar energy, fan, battery conversions, micro-controllers, and electronic projects. so on. Maintain stable output voltage and limit the output current over a range of input voltages.
DC 12V-60V Lead-Acid Digital Battery Capacity Indicator Charge Tester Voltmeter
SKU: AI0542 ₹127.44 (₹108.00 + GST)Quick Overview:
- Voltage Measuring Range: 12–60V DC
- Working Current: 5–15mA
- Material: Copper + ABS Plastic
- Body Color: Black
- Digital Display Light Color: Blue
- Dashboard Cut Size for Installation: 50mm × 30mm
3.3V Adapter Board for 24L01 Wireless Module
SKU: AI0728 ₹32.57 (₹27.60 + GST)It can be used with NRF24L01 wireless module
Add core nRF24L01+ Breakout Adapter with onboard 3.3V Regulator
Onboard 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached nRF24L01+ module
Allows for easy connection to nRF24L01+ modules
Small power on SMD LED indicator
FT232RL USB TO TTL 5V 3.3V Download Cable To Serial Adapter Module for Arduino
SKU: AI0032 ₹89.68 (₹76.00 + GST)Quick Overview:
- Chipset: FT232RL
- Supported Voltages: 3.3V / 5V (selectable via jumper)
- Main Color: Red
- Pitch: 2.54 mm
- Interface: Mini USB
- Weight: ~4 g
- Material: PCB Electronic Component
12V-24V to 5V 3A Super Mini Size DC Step Down Module with 97.5% Efficiency
SKU: AI0583 ₹56.64 (₹48.00 + GST)Input Voltage:DC 4.5-24V
Module Size: 10 x 20 mm
Adjustable Range:0.8-17V,fixed voltage (1.8V 2.5V 3.3V 5V 9V 12V)
Output Current:3A (max),actual testing input 12V output 1.5A
Transform Efficiency:97.5%(max) (6.5 to 5V 0.7A)
Switch Frequency:500KHz
Output Ripple Wave:20mV (12V to 5V 3A) 20m band width
TDA2030A 6-12V 18W Audio Amplifier Module
SKU: AI0530 ₹66.08 (₹56.00 + GST)QUICK OVERVIEW
- Operating voltage: 6 to 12V DC
- Onboard TDA2030A Audio amplifier IC
- Mono channel 18W Power amplifier circuit design
- Onboard horn socket
- 10 k adjustable resistance to adjust the volume of the amplification
- Onboard power indicator light
- Chip has lead to the main pin, can directly input the audio signal
NE555 Pulse Frequency Duty Cycle Adjustable Module Square Wave Signal Generator
SKU: AI0169 ₹49.44 (₹41.90 + GST)Main chip: NE555
Input Voltage: 5V-15V DC.
Generate an adjustable pulse for MCU.
Generate an adjustable pulse, to control circuitry associated.
CP2102 USB 2.0 to TTL UART Serial Convertor Module
SKU: AI0357 ₹138.06 (₹117.00 + GST)Quick Overview:
- Stable and reliable chipset CP2102
- USB specification 2.0 compliant with full speed 12Mbps
- Standard USB type A male and TTL 6-pin connector
- 6 pins for 3.3V, RST, TXD, RXD, GND & 5V
- Baud rates: 300 bps to 1.5 Mbps
USB to RS485 Converter Adapter Support WIN7 XP Vista Linux Mac OS
SKU: AI0156 ₹66.08 (₹56.00 + GST)Fully compliant USB 2.0 standard, backward compatible with USB1.1
Support System: Windows XP, Vista, Windows 7, Linux, MacOS, and WinCE5.0 drive
Baud Rate Range: 75bps – 115200bps, up to 6Mbps
Supports Plug, Play and hot-swap ( USB side)
Better than using CH341D chip or similar chip to support the laptop USB port.
Communication distance up to 1.2KM
LCD1602 Parallel LCD Display with IIC/I2C Interface
SKU: AI0058 ₹151.04 (₹128.00 + GST)Quick Review
- Model: LCD1602
- Character Color: White
- Backlight: Blue
- Supply voltage: 5V.
Mini Micro SDCard Reader Module
SKU: AI0577 ₹37.05 (₹31.40 + GST)Quick Overview:
- Product Name: Mini Micro SDCard Reader Module
- Supports FAT file system SD carrier
- Supports playing of 4Bit ADCPM format files
- Recognize the voice files automatically
- Support microprocessor and key control
- Audio output: 16bitDAC and PWM
0.56 inch Red 4 Digit 7 Segment LED Display
SKU: AI0507 ₹22.77 (₹19.30 + GST)- Bright Red LED chip, which is made from AlGaAs on GaAs substrate
- Blackface and RED LED segments
- Type: Common cathode
- No. of Pins: 12
- Low Current Consumption
- High Brightness
- Easy to Use with PCB Mounting as well as on Breadboard
Blue Two-Wire 0.56 Inch DC5V-120V DC Digital Display Voltmeter For Car Bicycle Motorcycle
SKU: AI3380 ₹54.28 (₹46.00 + GST)- Voltage Measuring Range: 0 to 200 VDC
- It is a 2-wire display.
- LED Color: Blue
- Current Consumption: Less than 20mA, generally 5-15mA
- Accuracy: 0.1 V.
- Refresh Speed : Approx 300mS/time.
DC-DC 3A 5V-12V , 5V Step-down Power Supply Module
SKU: AI2449 ₹71.98 (₹61.00 + GST)
QUICK OVERVIEW:
- Maximum Output Current: 5A MAX
- Conversion efficiency: can up to 97.5%
- Switch frequency: 500KHz
- Operating temperature: Industrial grade (-40 ° to + 85 °)
- Improve conversion efficiency
USB Type A Breakout Board – Male
SKU: AI0519 ₹8.85 (₹7.50 + GST)- USB Type: Type-A
- PCB Size : 15x15mm
AMS1117 5V Step-Down Power Supply Module
SKU: AI0674 ₹13.33 (₹11.30 + GST)Quick Overview
- Onboard AMS1117 chip.
- Onboard power indicator to indicate power is turned on: Red LED.
- Small Compact Size, 4Pin Type, Breadboard Friendly.
- Dual-panel design, the layout is nice
CH340G USB To TTL(Serial) Converter For Arduino Nano Raspberry Pi
SKU: AI0327 ₹66.67 (₹56.50 + GST)
Built-in USB to TTL Transfer chip.
Designed to be used for USB to TTL electronic projects.
TTL interface output, easy to connect to your MCU.
Dual 3.3V and 5V Power output, work with 3.3v and 5 V target device.
The mini-module is designed specifically for STC download and ARDUINO PRO supports all series of STC
Supports WIN7/VISTA/MAC/LINUX(32 bit /64-bit system)
Add to Compare
Laser Module
SKU: AI0120 ₹46.85 (₹39.70 + GST)Quick Overview
- Voltage: 3.0 V – 5 V.
- Driver: APC circuit.
- Line length: about 135 mm.
- Transmit power: 58mW.
- Operating Current: 40mA.
- Operating Current: 40mA.
- Operating temperature: -36◦C ~ 65◦C.
NE555 Time Delay Monostable Switch Module 12V
SKU: AI0088 ₹54.28 (₹46.00 + GST)
Module based on the NE555 chip.
Input voltage: DC 12V
Adjustable time: 0-10 s
AC Control voltage: 250V/max. 10A
DC Control Voltage: 30V/max. 10A
Max. load: 2200W
Add to Compare
MH-M18 Wireless Bluetooth Audio Receiver Board Module BLT 4.2 MP3 Lossless Decode
SKU: AI0722 ₹87.32 (₹74.00 + GST)Quick Overview
- Small Size Bluetooth Audio Receiver.
- Two-channel Stereo Lossless Playback
- Convenient to use.
- Suitable for DIY projects
Hi-Link HLK 5M05 5V/5W Switch Power Supply Module
SKU: AI0280 ₹226.56 (₹192.00 + GST)Quick Overview:
- Product Name: Hi-Link HLK 5M05 5V/5W Switch Power Supply Module
- Meet UL, CE requirements,
- Ultra-thin, ultra-small
- All voltage input (AC: 90 ~ 264V)
- Low ripple and low noise
AMS1117 3.3V Power Supply Module
SKU: AI2125 ₹14.40 (₹12.20 + GST)QUICK OVERVIEW:
- Input: DC 4.5V – 12V (input voltage must be more than output voltage (more than 1V))
- Output: 3.3V, 800mA (load current cannot exceed 800ma)
- Onboard AMS1117 chip.
- Onboard power indicator to indicate power is turned on: Red LED.
- Small Compact Size, 4Pin Type, Breadboard Friendly.
- Dual-panel design, the layout is nice
150W DC-DC Step-Up Boost Converter 10-32V to 12-35V 6A Adjustable Power Supply Module
SKU: AI0176 ₹132.16 (₹112.00 + GST)- Input voltage :10-32V
- Output voltage: 12-35V (adjustable)
- Output Current: 10A (MAX)
- Input Current: 16A (MAX) (Please enhance heat dissipation if more than 10A)
- The non-isolated step-up power conversion module
- Onboard LED illuminates when the voltage is applied to the module
- Equips Multi-turn Potentiometer.
XH-A232 TPA3110 30W+30W 2.0 Channel Digital Stereo Audio Power Amplifier Board
SKU: AI2103 ₹94.40 (₹80.00 + GST)- Original TPA3110 core technology
- Easy Plug and Play Operation
- Dynamic operating Voltage Range: 12 to 24V
- High fidelity Dual 30W output.
1.3 Inch I2C/IIC 128 x 64 -WHITE OLED Display Module 4pin
SKU: AI0081 ₹314.00 (₹266.10 + GST)Driver IC: SSH1106
Resolution: 128 x 64 pixel
Display Area : 34.5 x 19mm
Input Voltage: 3.3V ~ 6V
Operating Temp : -40º~70º Celsius
Interface Type : IIC
Pixel Color: White
No of Pins: 4 pin
1×4 Matrix – Membrane Type Keypad – 4 Keys
SKU: AI0522 ₹47.20 (₹40.00 + GST)- Ultra-thin design & adhesive backing provides easy integration to any project
- Excellent price-performance ratio
- Easy communication with any microcontroller
- 5 pins 2.54mm pitch connector, 4×1 type 4 keys.
- Sticker can peel off for adhesive mounting.
- Operating Voltage(VDC): 12
- Current : 30 mA
MH-M38 Wireless Bluetooth Audio Receiver Module with Cable
SKU: AI0723 ₹141.60 (₹120.00 + GST)Bluetooth V4.2 version, support Bluetooth automatic connection technology,
Support WAV/WMA/FLAC/APE/MP3 lossless decoding, stereo dual channel output.
5V 700mA 3.5W Isolation Power Supply Module AC-DC Step Down Module
SKU: AI0544 ₹95.58 (₹81.00 + GST)
Input Voltage: 220VAC
Output Voltage: 5 VDC.
Output Power: 3.5W.
Output overload and short circuit protection.
Add to Compare
DS3231 RTC Module Precise Real Time Clock I2C – AT24C02
SKU: AI0746 ₹351.64 (₹298.00 + GST)Accuracy 2 ppm from 0° C to +40° C
Accuracy 3.5 ppm from -40° C to +85° C
Digital Temp Sensor Output: ±3° C Accuracy
Memory Chips: AT24C02 (2Kbit)
Register for Aging Trim
RST Output/Pushbutton Reset Debounce Input
Two Time-of-Day Alarms
Programmable Square-Wave Output Signal
Fast 400 Khz I2C interface
LED Traffic Lights Signal Module / Digital Signal Output Traffic Light Module
SKU: AI1090 ₹31.62 (₹26.80 + GST)Quick Overview:
- Product Name : LED Traffic Lights Signal Module / Digital Signal Output Traffic Light Module
- PCB Size: 60 x 20 x 13.5 (LxWxH)mm.
- Color: red, yellow, green
- LED Size: 10mm x 7.
- Brightness: Normal brightness.
- Voltage: 5V.
- Interface: common cathode red yellow green control.
TJA1050 CAN Controller Bus Driver Interface Module
SKU: AI0526 ₹62.54 (₹53.00 + GST)
QUICK OVERVIEW
Add to Compare
- Onboard TJA1050 CAN controller interface chip
- Chip commonly used pin has led, convenient connection to use
- Pin 5 v to the power supply
- PCB board size: 22 (mm) x11.5 (mm)
- Fully compatible with the ISO 11898 standard
- High speed (up to 1 Mbaud)
AC-DC Power Supply Module 12V 2A Switching Power Supply Board
SKU: AI2093 ₹206.50 (₹175.00 + GST)
This industrial power module is designed to convert AC power to 12V 2A DC. It features built-in over-voltage, over-current, and...
Add to Compare
Digital Sensor TTP223B Module Capacitive Touch Switch
SKU: AI0230 ₹24.78 (₹21.00 + GST)Quick Overview
- Power supply voltage(VCC): 2.0, 3, 5.5 V.
- Output high VOH: 0.8VCC V
- Output low VOL: 0.3VCC V
- Response time (touch mode) : 60 mS
- Response time (low power mode) : 220 mS
- Can replace the traditional touch of a button
- Four M2 screws positioning holes for easy installation
5V 4 Channel Relay Module
SKU: AI0066 ₹153.40 (₹130.00 + GST)Quick Overview:
- Product Name : 5V 4 Channel Relay Module
- 5V 4-Channel Relay interface board and each one needs 15-20mA Driver Current.
- Equipped with high-current relay, AC250V 10A; DC30V 10A.
- Standard interface that can be controlled directly by microcontroller (for Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
- Indication LED’s for Relay output status.
I2C Bi-Directional logic Level Converter- 4 Channel
SKU: AI2197 ₹17.94 (₹15.20 + GST)Quick review :
- Material: ABS + metal
- Dimensions: 16 x13 x 3 (L x W x H) mm
- Weight: 2gm
- Mutual transform between 5V TTL and 3.3V TTL
- Four channels of logic and high voltage low voltage logic can two-way transform
- Portable and lightness, with 2 rows 6 pin contact pins
MCU-Micro USB Breadboard 5V Power Supply Module
SKU: AI1585 ₹8.50 (₹7.20 + GST)- Interface: USB OTG
- Connector Type: USB Micro Female
- Size: 15 x 13mm
- Breakout Signals Pin Spacing : 0.1 inch / 2.54mm
- Mounting Holes: Yes
- PCB Color: Blue
LM2596 2A Buck Step-Down Power Converter Module DC 4 ~ 40 to 1.3-37V LED Voltmeter
SKU: AI0238 ₹106.20 (₹90.00 + GST)Quick Overview
- Input Voltage(VDC): 4 ~ 40.
- Output Voltage(VDC): 1.3 ~ 37.
- Output Current: 2A Rated, ( 3A maximum with heat sink).
- Switching Frequency: 150 kHz.
- Input reverse polarity protection.
- Built-in output short protection function.
5V 2 Channel Relay Module
SKU: AI0084 ₹83.78 (₹71.00 + GST)Quick Overview
- 2 Channels
- Maximum switching voltage: 250VAC / 30VDC
- Maximum switching current: 10A
- Each relay features an LED indicator.
- Dimensions: 51 x 39 x 18mm (Length x Width x Height)
Capacitor Touch Dimmer Constant Voltage LED Stepless Dimming PWM Control Board
SKU: AI0524 ₹46.61 (₹39.50 + GST)QUICK OVERVIEW
- Operating Voltage Range : 2.4 – 4.5
- Aperture (mm) : 16
- Length (mm) : 39
- Width (mm) : 19
- Height (mm) : 11
- Weight (gm) : 3
MP3 Decoder Board 2W Amplifier GPD2846A TF Card Module
SKU: AI0721 ₹63.72 (₹54.00 + GST)Quick Overview
- Working Voltage: 3.7V Lithium Battery 600MA or 5V USB Power Supply
- With Power supply, it can play Automatically
- With Multifunction LED indicator
- Supports MP3 format playback
- Supports USB audio mode
5A Constant Current / Voltage LED Drives Lithium Battery Charging Module
SKU: AI2085 ₹107.38 (₹91.00 + GST)- Input Voltage Range: 4-38V
- Output Voltage Range: 25-36V continuously adjustable
- Output current: adjustable, up to 5A
- Output power: up to 75W
- Working temperature :-40 ~ + 85 degrees
- Working frequency: 180KHz
CJMCU-TRRS 3.5mm Jack AV Stereo Module
SKU: AI2430 ₹20.65 (₹17.50 + GST)
QUICK OVERVIEW:
- Mini design, portable and easy to use.
- It is the audio-style connectors that you see on some phones, MP3 players, and development boards.
- Dimensions: 18 x 12 x 6(L x W x H) mm
- Weight: 2 gm
TPA3118 PBTL Mono Digital Amplifier Board 1X60W 12V 24V Power Amplifier Module
SKU: AI0254 ₹116.82 (₹99.00 + GST)Quick Overview
- Working Voltage: DC 8-24V
- Power Output: 60W
- Applicable Speaker Impedance: 4-8 Ω
- Sound quality is very good by using this module.
- Mono digital audio power amplifier chip.
- High output and low power consumption.
WX-DC12003 5V,0.7ASMPS
SKU: AI5398 ₹75.52 (₹64.00 + GST)- Maximum Output Current: 0.7 amps
- Input Voltage Range: (Typically AC 100-240V, 50/60Hz)
- Efficiency: High efficiency rating for reduced power consumption and heat generation
- Output Regulation: Stable output voltage regulation for consistent performance
- Short Circuit Protection: Built-in protection mechanism to prevent damage in case of a short circuit
GY-9833 AD9833 Programmable Sine Square Wave DDS Signal Generator
SKU: AI0292 ₹450.76 (₹382.00 + GST)
3 V to 5.5 V power supply
Digitally programmable frequency and phase
0 MHz to 12.5 MHz output frequency range
28-bit resolution: 0.1 Hz at 25 MHz reference clock
Sinusoidal, triangular, and square wave outputs
3-wire SPI interface
Add to Compare
XL4015 5A Step Down Adjustable Power Supply with LED Voltmeter
SKU: AI0260 ₹269.28 (₹228.20 + GST)Better than 2596, Easy to 4A 50W
Over-Temperature Protection: Yes
Input Voltage: 4V ~ 38V
Output Voltage: 1.25V ~ 36V
Output Current: 0A ~ 5A
0.28 inch Digital Voltmeter Ammeter DC 100V 50A LED Amp Volt Meter With Shunt
SKU: AI2311 ₹265.50 (₹225.00 + GST)
Operating Voltage:5V DC
Current Consumption: <60mA
Testing Voltage: 0-100V
Testing Current: 1-50A
Easy to read even in dim light
High Quality 8-bit WS2812 5050 RGB LED Built-in full-color driver development board Blackboard
SKU: AI4243 ₹29.62 (₹25.10 + GST)- Outer Diameter: 32 mm.
- Supply Voltage: DC 4-7V.
- LED Driver IC: WS2812
- Communication interface: single wire communication.
- Send data at speeds of 800Kbps.
- The color of the light was highly consistent
- Full-color module, Full-color soft lights a lamp strip.
Peacefair PZEM-004T AC Multi-function Electric Energy Metering Power Monitor
SKU: AI1968 ₹486.16 (₹412.00 + GST)Brand: Peacefair
Model: PZEM-004T
Operating Voltage: 80-260VAC
Test Voltage: 80-260VAC
Rated Current: 100A
Rated power: 100A / 22000W
Operating frequency: 45-65Hz
Measurement accuracy: 1.0
LM2596S with SMD LED DC-DC Step-Down Power Supply
SKU: AI5198 ₹60.18 (₹51.00 + GST)- Input voltage: 3-40V
- Output voltage: 1.5-35V(Adjustable)
- Output current: Rated current is 2A, maximum 3A
- Switching Frequency: 150KHz
- Operating temperature:Industrial grade (-40 to +85 )
- Conversion efficiency: 92%(highest)
300W 20A DC-DC Buck Converter Step-down Module Constant Current LED Driver Module
SKU: AI2107 ₹324.50 (₹275.00 + GST)- High Power DC-DC Step Down Module
- Input Voltage: 6-40V DC
- Output Voltage: 1.25-36V DC
- Efficiency: 97%
- Maximum Power: 300W
1602 Parallel LCD Display with Blue Backlight
SKU: AI0630 ₹70.80 (₹60.00 + GST)Quick Overview:
- Model: LCD1602
- Character Color: White
- Backlight: Blue
- Supply Voltage: 5V
- Board Dimensions (L × W × H): 80 × 36 × 10 mm
PCF8574T I2C I/O Extension Board
SKU: AI0570 ₹55.46 (₹47.00 + GST)Interface: I2C
Operating Voltage: 3-5VDC
Ports: 8-bit Parallel Ports
Can be used with Arduino and Raspberry Pi
0.56 inch Red 2 Digit 7 Segment LED Display CC – 18Pin
SKU: AI0108 ₹39.18 (₹33.20 + GST)
Bright Red LED chip, which is made from AlGaAs on GaAs substrate
Blackface and RED LED segments
Type: Common cathode
No. of Pins: 18
Low Current Consumption
High Brightness
Add to Compare
Micro SD Card Reader Module
SKU: AI0035 ₹32.69 (₹27.70 + GST)Quick Review
- Power Supply: 4.5V – 5.5V, 3.3V
- Positioning Holes: 4 M2 screws positioning hole diameter of 2.2mm
- Control Interface: GND, VCC, MISO, MOSI, SCK, CS
- Size: 45 x 28mm
- Net weight: 6g
PL2303 – PL2303HX USB To TTL Serial UART Converter Module – 5 Pin
SKU: AI0325 ₹60.18 (₹51.00 + GST)Quick Overview:
- Adopt imported controller PL2303HX, which can stabilize the flash with high speed
- 500mA self-recovery fuse for protection
- Two data transmission indicator can monitor data transfer status in real time
- Reserve 3.3V and 5V pin interface, easy for the DDWRT of different voltage system that needs power
- The entire board is coated by the high quality transparent heat-shrinkable sleeve, making the PCB in insulation state from outside,
- so that the board won’t be burnt down by material shortcut.
- Electrostatic package ensures the board will not be damaged before use
Red Two-Wire 0.56 Inch DC5V-120V DC Digital Display Voltmeter For Car Bicycle Motorcycle
SKU: AI3379 ₹83.19 (₹70.50 + GST)
QUICK OVERVIEW
- This is a 2-wire display that measures voltage from 0 to 200 VDC. The LED color is red and the current consumption is usually 5-15mA, but never more than 20mA. The display has an accuracy of 0.1 V and a refresh speed of 300mS/time.
LilyPad LED White Color
SKU: AI0734 ₹13.33 (₹11.30 + GST)Quick Overview
- Wearable e-textile technology.
- Available Various input, output, power, and sensor boards.
- Washable
XD-21 LM358 Gain Amplification Module Operational Amplifier Module
SKU: AI0726 ₹30.80 (₹26.10 + GST)LM358 chip onboard.
100 gain of the circuit design.
10K onboard adjustable resistance, you can adjust the magnification.
Onboard power indicator.
The chip has led major pin can be directly input and output signals.
0.91 inch 128×32 Blue OLED Display Module with I2C/IIC Serial Interface
SKU: AI0299 ₹177.00 (₹150.00 + GST)Quick Overview
- Driving IC: SSD1306
- Operating Voltage: 3.3-5V
- Resolution Ratio: 128 x 32
- Text Color: White
- Background Color: Black
0.28 100V 50A Dual LED Voltmeter Ammeter Blue+Red
SKU: AI3945 ₹121.54 (₹103.00 + GST)QUICK OVERVIEW:
- Operating voltage: DC 4.5 ~ 30V
- Minimum resolution(V): 100V
- Minimum resolution(A): 50A
- Display color: Red and Blue (two-color display)
- Measure accuracy: 1%
Timing Delay Switch Circuit with Double MOSFET Control
SKU: AI2753 ₹129.80 (₹110.00 + GST)Wide voltage power supply (6~30V)
supports micro USB 5.0V power supply
The interface is clear and simple, powerful, easy to understand
All set parameters automatically save power.
ENC28J60 Ethernet Module (10 Pin Package: SSOP)
SKU: AI0359 ₹286.74 (₹243.00 + GST)Quick Overview:
- ENC28J60 Ethernet Module
- HanRun HR911105A Ethernet port
- 5V supply voltage
- 100% Genuine ENC28J60 Chipset, compatible with Arduino etc.
- 25MHz Crystal
- Standard HanRun HR911105A Ethernet Interface
Laser Non-Modulator Tub Sensor Receiving Module Laser Output High Level
SKU: AI0308 ₹82.60 (₹70.00 + GST)Quick Overview
- Working Voltage: 5V DC
- Operating Temperature: -30ºc ~ 85ºc
- Output high level when received the laser signal
- Output low level when not receive laser signal.
- Application: Electronic Circuits
DC 12V Wired Mini Horn Siren Home Security Sound Alarm System 120DB Anti-theft Speaker Buzzer
SKU: AI0720 ₹146.32 (₹124.00 + GST)Quick Overview
- Material: ABS plastic
- Color: Red-black
- Length of Wire: 1m
- Sound Level: 120DB
- Voltage: 12V
- Standard Current: >=320mA
- Weight: 132g
- Diameter: 50mm
- Height: 52mm
- Installation method: wired
ESP-01 Adapter 3.3V 5V Board
SKU: AI0168 ₹56.64 (₹48.00 + GST)QUICK OVERVIEW
On-board level shift circuit
Arduino UNO R3 and the compatible board can directly connect to this module;
Interface logic voltage: 3.3V / 5V compatible(On-board level shift circuit);
Working voltage: 4.5~5.5V (Onboard 3.3V LDO Regulator);
Working current: 240mA(MAX).
KBPC5010 50A 1000V Diode Bridge Rectifier
SKU: AI5228 ₹46.49 (₹39.40 + GST)- Electrically Isolated Metal Case for Maximum Heat Dissipation
- Case to Terminal Isolation Voltage 2500
- Dimensions (Overall): 28.9 x 28.5 x 22mm
- Peak Average Current: 50A
- Reverse Voltage (Max): 1000V
W5500 TCP / IP SPI to LAN Ethernet Interface SPI to LAN / Ethernet Converter
SKU: AI0718 ₹368.16 (₹312.00 + GST)Quick Overview
- 80MHz high-speed SPI interface
- Built-in hardware TCPIP protocol stack
- Support up to 8 Socket connections
- Support TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE protocol
- Support power-down wake up
- Support high-speed serial peripheral interface (SPI mode 0~3)
- Internal 32K byte send and receive buffer
400KV Step Up Power Module
SKU: AI5209 ₹90.86 (₹77.00 + GST)Input Voltage: DC3.6V-6V
Input Current: 2A-5A
Output Voltage: DC 400KV (Please pay attention to safety when used)
Input Line Length: about 100mm (red is positive)
Output Line Length: about 160mm
0.36 inch Red 4 Digit 7 Segment LED Display CA
SKU: AI3826 ₹18.53 (₹15.70 + GST)Size: 0.36 inch
Emitting Color: Red
Mode: Common-Anode (CA)
Digit: 4-Digit
Category: LED 7-Segment Display
Hi-Link HLK 20M12 12V/20W Switch Power Supply Module
SKU: AI0765 ₹384.68 (₹326.00 + GST)
Meet UL, CE requirements,
Ultra-thin, ultra-small
All voltage input (AC: 100 ~ 240V)
Low ripple and low noise
Output overload and short circuit protection
High efficiency, high power density
The product is designed to meet the requirements of the EMC and Safety Test
Low power consumption, environmental protection, no-load loss <0.1W
DS18B20 Temperature Sensor Module
SKU: AI0332 ₹53.10 (₹45.00 + GST)Quick Overview:
- Product Name: DS18B20 Temperature Sensor Module
- Digital signal output
- 18B20 Temperature Sensor Chip
- Resolution adjustment ranges from 9-12 bytes.
- Send data via a pin
- Temperature measurement ranges: -55°C to +125°C, be accurate to 0.5°C.
SX1308 DC-DC Step Up Adjustable Power Supply 28V 2A 1.2Mhz Power Booster Module
SKU: AI0591 ₹42.60 (₹36.10 + GST)
QUICK OVERVIEW
Add to Compare
- Oscillation frequency 1.2MHz
- efficiency is as high as 95%
- The circuit has short circuit protection, overheating protection function
- 10k to adjust potentiometer, adjust the output voltage
Free Shipping
On orders above ₹999
COD Available
Min. order ₹250 for COD
GST Invoice
Available on all orders
1,50,000+ Orders
Delivered across India
Expert Support
Toll Free: 1800 209 0998
Product categories
- Show All Categories
- 3D Printers and Parts (379)
- Batteries, Chargers and Accessories (811)
- Clearance Sale (0)
- Development Boards (438)
- DIY Learning and Robot Kits (117)
- Drone Parts (1364)
- EBike parts (140)
- Electronic Components (783)
- Electronic Modules and Displays (1201)
- FPV Freestyle Mid/High KV Drone Motors (0)
- IoT and Wireless (544)
- Mechanical Parts and Workbench Tools (241)
- Motors & Drivers & Pumps & Actuators (583)
- Sensor Modules (639)
- Electronic Modules and Displays (1201)
- Character LCD Displays (2)
- Display modules (265)
- Electronic Modules (755)
- Measuring Instruments (102)
- Power Supply (62)
- Signal Generator Module & Oscilloscopes (17)