Size: 0.96-inch OLED
Material: PM OLED
Resolution: 128*64
Interface type: SPI, IIC
Working voltage: 3.3V
Control chip: SSD1306
QUICK OVERVIEW:
480×320 hardware resolution, configurable by software. (up to 1920×1080).
Resistive touch control.
Provide driver. (support RaspbianUbuntuKali and Retropie system).
When only used for display, does not occupy any I/O resources.
Multi-languages OSD menu, for power management, brightness/contrast adjustment, etc.
Supports HDMI audio output.
USB2.0 Audio Video Capture Card Adapter VHS To DVD Video Capture Converter
QUICK OVERVIEW
QUICK OVERVIEW:
Operating supply voltage: 5 to 7V
Data interface level: 2.7-5V.
Resolution: 84 x 48 pixel
Backlight: Blue.
All voltage input (AC: 90 ~ 264V).
Output voltage: 5 VDC.
Output Power: 2W.
Output overload and short circuit protection.
No-load loss <0.1W.
Supports MPPT (Maximum Power Point Tracking) function, maximizing the efficiency of the solar panel
Flexible battery recharging: from the solar panel as well as USB TYPE-C power adapter
Compatible with 6V~24V solar panels, DC-002 jack input or screw terminal input
Heavy Aluminium body with a stylish finish and Multi status LEDs
Batteries can be easily replaced by removing the cover.
Good PRINT PACK design, very beautiful.
8 worlds of the three primary colors (red-green-blue) LED color, scanning control mode.
Applicable for various platforms, such as 51 / AVR / AVR / ARM / for Arduino All kinds of platforms.
Model: PCF8563
Weight : 3 gm.
I2C pin header,
3.3V battery.
Dimensions : 61 x 16 x 11 mm (LxWxH).
Power supply: 5V / 4A (VH4 header input)
Power: ≤20W
Pitch: 3mm
Driving: 1/32 scan
Header: HUB75
QUICK OVERVIEW:
Resolution:1024 x 600
Display Port: HDMI
Touch Type: Capacitive
Touch Points:5 points
7-inch IPS screen with a hardware resolution of 1024×600.
5-points capacitive touch control.
Using Raspberry Pi, it supports Raspbian / Ubuntu / Kali / Retropie and WIN10 IoT, no need to install any drivers.
QUICK OVERVIEW:
QUICK OVERVIEW:
Operating voltage: 3.3V / 5V
Interface: 3-wire SPI, 4-wire SPI
Display Panel: IPS
Driver: GC9A01
Resolution: 240 × 240 pixels
Display Size: Φ32.4mm
QUICK OVERVIEW:
Part Number: G3MB-202P
Power supply:12VDC/160mA
Switching Voltage (VAC):240@2A
Isolation: Phototriac
MODEL NO: HY-M283
QUICK OVERVIEW:
Display Type: LCD
Touch Type: Capacitive
Touch Point:10
Display Resolution:1920×1080
Viewing Angle:178°
Default Relay trigger Setting : Low-Level
Logic Input (V) : 3.3 ~ 5
Trigger Voltage (VDC) : 12
Switching Voltage (VAC) : 250@10A
Switching Voltage (VDC) : 30@10A
QUICK OVERVIEW:
QUICK OVERVIEW:
QUICK OVERVIEW
Outer Diameter: 18mm
PCB Thickness: Thin 0.8mm
This 1 Channel 12V Relay Module is capable of actuating 240VAC/30A circuits safely – Eliminating dangers of high current circuits for users.
Operating Voltage – 12VDC Max Current Control – 30A Max Voltage Control (AC) – 240V Max Voltage Control (DC) – 30V
Output Modes – Normally Open / Normally Closed Dimensions – 40 x 34 x 22mm Weight – 35g
Despite being able to actuate high current and high voltage circuits, the relay itself operates on up to 12VDC, which is safe for users if a fault occurs.
Without a relay, if the high current circuit were to leak directly into a user, it could cause serious harm to a user and damage to the components.
Model: PZEM-022
Operating Voltage (VDC): 80 ~ 260
Rated Power (W): 100A/22000W
Color: Black
Dimension (mm): 90*50*25.
Weight (gm): 90
10.1 Inch Capacitive Touch Screen LCD display.
1024 x 600 screen resolution and IPS display panel.
Various Systems & Devices Support, Including Raspberry Pi, Jetson Nano, PC, etc.
Polycarbonate Enclosure
Multi-video input interfaces: HDMI, VGA, and AV(CVBS)
QUICK OVERVIEW:
On orders above ₹999
Min. order ₹250 for COD
Available on all orders
Delivered across India
Toll Free: 1800 209 0998