12V 3A Touch Sensor Switch for Mirror Light
SKU: AI0680 ₹141.60 (₹120.00 + GST)Quick Overview
- Output Line : 3 Line 150mm
- Input Line : Double Line 300mm
- Voltage : 12V
- Function : White Warm Two-Color Infinite Dimming
IRLR7843TRPBF MOSFET
SKU: AI1386 ₹17.94 (₹15.20 + GST)Product: IRLR7843TRPBF
Drain to Source Voltage (Vdss): 30 V
Current – Continuous Drain (Id) at 25°C: 161A (Tc)
Drive Voltage (Max Rds On, Min Rds On): 4.5V | 10V
ADXL345 Tripple Axis Accelerometer Board
SKU: AI0330 ₹215.94 (₹183.00 + GST)Supply Voltage: 3.3 V/ 5V.
Interface Type: I²C, SPI.
Sensing Range: ±2g, ±4g, ±8g, ±16g.
Sensitivity:
X: 28.6 LSB/g.
Y: 31.2 LSB/g.
Z: 34.5 LSB/g.
Ultra Low Power: 40µA in measurement mode, 0.1µA in standby@ 2.5V.
Free-Fall Detection.
Tap/Double Tap Detection.
26AWG Servo Wire 3core (length:1m)
SKU: AI4542 ₹29.50 (₹25.00 + GST)Length : 1 m
Wire gauge: 26AWG
Model Number : 26AWG
Rated voltage : 300V
temperature range : -30℃+80℃
Copper count ： 3 core
Core material : Extra fine Tinned copper
Skin material: PVC (polyvinyl chloride)
Colour : Black red white
Application scope : Servo , Aviation model, motor, ESC, RC aircraft, etc
temperature range : -30℃+80℃
Copper count ： 3 core
Core material : Extra fine Tinned copper
Skin material: PVC (polyvinyl chloride)
Colour : Black red white
Application scope : Servo , Aviation model, motor, ESC, RC aircraft, etc
Note: Wire will also made available as per requirement
PCT-223-4 Stationary Type, Quick Connection Terminal
SKU: AI2152 ₹40.83 (₹34.60 + GST)Rated voltage: 600V
Rated current: 32A
Number of poles: 4
Wire section :0.08~4.0mm2
Number of clamps: 8
65mm Robot Wheel for BO Motors (Yellow)
SKU: AI0009 ₹25.96 (₹22.00 + GST)Quick Overview:
- Loading Capacity (Kg): 2.5
- D hole For BO Motor: 6 mm
- Wheel Diameter(mm): 65 mm
- Color
- Tyre: Black
- Rim: Yellow
- Wheel Width: 27 mm
- Body Material Plastic
- Grip Material Rubber
- Center Shaft Hole Diameter
- 5.4mm-(round side) and 3.5mm-(flat side)
400 Points Solderless Breadboard
SKU: AI0055 ₹34.34 (₹29.10 + GST)Quick Review
- Type: Plug-in breadboard
- Size: 3.3 x 0.3 inches
- Total 400 tie points
- 2 power buses
- 400 tie in points
- 0.1″ space
- 10 rows
ESP WROOM 32 Wi-Fi Bluetooth Development Board -30 pin
SKU: AI0038 ₹377.60 (₹320.00 + GST)Quick Overview:
- Product Name: ESP WROOM 32 Wi-Fi Bluetooth Development Board -30 pin.
- 4 MB Flash.
- 30 Pin module.
- Current: 80 mA.
- Supply Voltage: 3.0 V ~ 3.6 V.
- Data Rate: 150 Mbps.
4 x 6 cm Universal PCB Prototype Board Double-Side
SKU: AI0370 ₹23.72 (₹20.10 + GST)Dimension: 4×6 CM
Quantity: 1 PCS
Base Material: FR4
Copper Thickness: 1-4 OZ
Board Thickness: 1.6
PCB Weight: 6gm
PCB color: Green
12V 4010 Cooling Fan for 3D Printer
SKU: AI0121 ₹48.38 (₹41.00 + GST)Quick Overview
- Perfectly fit on the extruder
- Noiseless Performance
- Very low Current consumption
- Easy to install and connect.
- Dimension: 40mm x 40mm x 10mm
Temperature and Humidity Sensor Model AHT20
SKU: AI0494 ₹71.98 (₹61.00 + GST)
QUICK OVERVIEW
Add to Compare
- Operating Voltage: 2.0-5.5VDC
- Measuring Range (humidity): 0% to 100% RH
- Temperature Range: -40°C to +85°C
- Output Interface: Grove I2C Interface
- Excellent long-term stability
- SMD package suitable for reflow soldering
Mini 360 Step Down Buck Converter Power Supply Module
SKU: AI0529 ₹28.67 (₹24.30 + GST)
Quick Overview
Add to Compare
- Module: Non-isolated step-down module (BUCK)
- Input voltage: DC 4.75V-23V
- Output voltage: DC 1.0V-17V (Adjustable, Output < Input)
- Rectification: Synchronous rectification
- Built-in 160°C thermal shutdown
- Output ripple: 30mV (no-load)
ST-Link V2 Programmer For STM8 and STM32
SKU: AI0012 ₹22.42 (₹19.00 + GST)Quick Overview:
- PCB installed inside of aluminum alloy U disk shell, portable, safe and reliable!
- Interface definition directly marked on the shell, clear, convenient and practical!
- 5V, 3.3V offers at the same time, allowing you to program your target board with both 5V and 3.3V
- Shell characters using laser engraving, never fade off! Permanent clarity!
- 500MA internal resettable fuse, complete protection of your expensive computer motherboard!
- SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector
- SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed
PCT-223-2 Stationary Type, Quick Connection Terminal
SKU: AI2157 ₹26.08 (₹22.10 + GST)Rated voltage: 400V
Rated current: 32A
Number of poles: 2
Wire section: 0.08mm² to 4.0mm²
Number of clamps: 4
Brown CR1220 Button Battery Patch Holder Golden Foot
SKU: AI4120 ₹9.09 (₹7.70 + GST)
Brown CR1220 Button Battery Patch Holder Golden Foot
Add to Compare
20CM Male to Male Breadboard Jumper Wires 2.5MM – 40Pins
SKU: AI0380 ₹68.44 (₹58.00 + GST)
QUICK OVERVIEW
Add to cart
Add to Compare
- 40P color DuPont line
- Length: 200mm
- Weight: 30 gm
- 1p-1p pin header, Male to Male
- A row of 40 root
- Durable and reusable
- Easy to install and use
7 x 9 cm Universal PCB Prototype Board Single-Sided 2.54mm Hole Pitch
SKU: AI0403 ₹36.23 (₹30.70 + GST)Dimension: 7 x 9 cm
Type: Single-Sided
Quantity: 1 Pcs.
Base Material: FR4
Copper Thickness: 1-4 OZ
Board Thickness: 1.6
Flat 1034 Mobile Phone Vibrator Motor
SKU: AI0298 ₹27.73 (₹23.50 + GST)Type: 1034
Rated Voltage(V): 3
Operating Voltage(VDC): 2.5 to 4
Operating Temperature (C): -20 to 60
Min. Rated Speed(RPM): 9000
Max. Rated Current(mA): 90
Max. Starting Current(mA): 120
Cable Length: 20 mm
CH-813 0.08-2.5mm SPL- 3 Pole Wire Connector with Spring Lock Lever for 3 Wire line Connection
SKU: AI2559 ₹24.78 (₹21.00 + GST)QUICK OVERVIEW:
- Model: CH-813
- Rated Voltage: 250V
- Rated Impulse Voltage: 4KV
- Material of Insulation: Modified Nylon(PA66)
- Compact, Super easy, Reliable, and Reusable.
- Color: Grey+Orange
- Rated Current:32A
- Rated power: 7KW
- Gauge:28~12AWG
PCT-214 0.08-2.5mm 4 Pole Wire Connector Terminal Block with Spring Lock Lever for Cable Connection
SKU: AI2090 ₹15.81 (₹13.40 + GST)- Model: PCT-214
- Rated Voltage: 220V
- Rated Impulse Voltage: 4KV
- Material of Insulation: Modified Nylon(PA66)
- Color: Grey+Orange
- Rated Current:32A
- Rated power: 7KW
- Gauge:28~12AWG
Joystick Module
SKU: AI0133 ₹49.32 (₹41.80 + GST)Quick Overview
- Operating Voltage: 5V
- Interface: 2.54mm pin leads
- Potentiometer Resistance: 10k ohms
- Output: Analog signals for X and Y axes
- Dimensions: Standard size for electronic building blocks
- Switch: Press-able switch included
- Compatibility: Widely compatible with Arduino and other DIY projects
- Dimensions: 34 x 34 x 15 (LxWxH) mm.
- Weight: 10gm (without Hat).
BMP280 Barometric Pressure and Altitude Sensor I2C/SPI Module
SKU: AI0205 ₹26.79 (₹22.70 + GST)Quick Overview
- Operating Voltage: 1.71V to 3.6V would typically be operated from 3.3V.
- Operating Temperature: -40 to +85 deg. Celsius (full accuracy between 0 and +65 deg. C).
- Peak current: 1.12mA.
- Operating Pressure: 300 hPa to 1100 hPa.
- Accuracy between 700 to 900hPa and 25 to 40 deg. C : ±0.12hPa and ±1.0m.
4mm SPDT 1P2T Slide Switch (Pack of 10)
SKU: AI0195 ₹19.12 (₹16.20 + GST)Quick Overview
- Rated Voltage=50V
- Rated Current = 5A
- Switch Type =SPDT
- Contact Type=Through-hole
- Contact Resistance=30m
XL4015 5A DC-DC Step Down Adjustable Power Supply Buck Module with Heatsink
SKU: AI0355 ₹71.98 (₹61.00 + GST)Quick Overview:
- Input voltage range: 4V – 38V DC
- Output voltage range: 1.25V – 36V DC adjustable
- Output current: 0 – 5A
- Output power: 75W
- High efficiency: Up to 96%
- Built-in thermal shutdown function
- Built-in current limit function
- In-built output short protection function
E18-D80NK NPN- NO Adjustable IR Sensor Proximity Switch 3-80cm Range
SKU: AI0115 ₹132.16 (₹112.00 + GST)Quick Overview
- Sensing range: 3 – 80cm.
- Input voltage: 5VDC.
- Current Consumption: 150mA.
- Digital Output.
- Cable length: 50cm
- Diffuse reflective type.
DS3231 IC Real Time Clock Integrated RTC/TCXO/Crystal
SKU: AI0847 ₹207.68 (₹176.00 + GST)Real-Time Clock Counts Seconds,
Minutes, Hours, Date of the Month,
Month, Day of the Week, and Year,
Also with Leap-Year Compensation Valid Up to 2100
Red Waterproof PBS-33B 12MM 2PIN Self-Reset Mini Round Push Button
SKU: AI3518QUICK OVERVIEW
- Good electrical conductivity
- This is a Momentary type push-button switch
- Easy to use
- Light Weight
- Function: Momentary
Type-C USB 5V 2A Step-Up Boost Converter with USB Charger
SKU: AI1130 ₹49.56 (₹42.00 + GST)
Input voltage range: 5-5.5V
Charging cut-off voltage: (4.2V/4.35V) ±0.5%:
Charging current: 2.4A±5%
Boost output voltage: 5V5.15V (wire loss compensation)
Boost output voltage ripple: 100mV
Add to Compare
0.28″ Digital Voltmeter (0-100V) and Ammeter (10 A) Dual LED Voltage Current Measurement Module
SKU: AI0348 ₹151.04 (₹128.00 + GST)Quick Overview:
- Display color: Red & Blue LED (dual display).
- Display: 0.28″ LED digital.
- Operating voltage: DC 4.5 ~ 30V.
- Measure voltage: DC 0 ~ 100V.
- Minimum resolution (V): 0.1V.
- Refresh rate: ≥500ms / times.
- Measure accuracy: 1% (± 1 digit).
- Minimum resolution (A): 0.01A.
- Operating Current: <20mA.
- Measure current: 10A (direct measurement, built-in shunt).
- Operating temperature: -10 to 65°c.
- Operating Humidity: 10 to 80% (non-condensing).
- Mounting cutout: 45.5mm x 26.5mm.
PIR Motion Sensor Detector Module HC-SR501
SKU: AI0085 ₹56.64 (₹48.00 + GST)Quick Overview
- Wide Working Voltage Range: DC 4.5V- 20V
- Current Drain: <60uA
- Detection Angle: <140°
- Detection Distance: 3 to 7m (can be adjusted)
- Blockade time: 2.5s (Default)
- Work temperature: -20- 80°C
MP 1584 DC-DC 3A Adjustable Buck Module
SKU: AI0498 ₹54.28 (₹46.00 + GST)Input Voltage: 4.5V – 28V
Output Voltage: 0.8V – 20V
Output Voltage Adjustment: On-board potentiometer
Output Current: 1.8A (typical), 3.0A (max).
Ceramic Capacitor Stable
Internal Soft-Start
Internally Set Current Limit without a Current Sensing Resistor
4mm Male&Female Gold Bullet Banana Connector
SKU: AI4439 ₹20.89 (₹17.70 + GST)- Diameter: 4.0mm
- Length:1.9CM & 2.1CM
- Gender: Male-Female
- Hook up RC Battery to Electronic
3PIN Flame Sensor Infrared Receiver Ignition Source Detection Module
SKU: AI0143 ₹33.04 (₹28.00 + GST)Quick Overview:
- Product Name: 3PIN Flame Sensor Infrared Receiver Ignition Source Detection Module
- Output Channel: 1
- Power Supply: 3.3/5V
- Built in a potentiometer for sensitivity control.
- Onboard signal output indication, output effective signal is high, at the same time the indicator light up, the output signal can directly connect to microcontroller IO.
- Detection angle about 60 degrees, the flame spectrum especially sensitive.
- The flame of the most sensitive sensors flame, the regular light is also a response, generally used for fire alarm purposes.
2 x 8 cm Universal PCB Prototype Board Single-Sided 2.54mm Hole Pitch
SKU: AI2177 ₹12.15 (₹10.30 + GST)
Quick review :
- Dimension: 2 x 8 cm
- Type: Single-Sided
- Quantity: 1 Pcs.
- Base Material: FR4
- Copper Thickness: 1-4 OZ
- Board Thickness: 1.6
D1 Mini V2 NodeMCU 4M Bytes Lua Wi-Fi Internet Of Things Development Board Based ESP8266
SKU: AI0157 ₹199.42 (₹169.00 + GST)- D1 Mini V2 NodeMCU 4M Bytes Lua Wi-Fi Internet Of Things Development Board
- Use BRT (Bias Resistor Transistor)
- Easier into flash mode.
- 30% Increase in radiating area
- Good Stability.
USB Female to 2.54mm Breakout Board with Direct 4P Adapter Board
SKU: AI0518 ₹12.74 (₹10.80 + GST)- Input Type: USB- Female
- Board Sze: 17 mm x 17 mm
- Weight: 3gm
BL-8513 Magnetic Anti-theft Alarm Device for Door/Windows
SKU: AI0575 ₹99.12 (₹84.00 + GST)Operating Voltage: 3V (2 x AAA battery)
Alarm Sound: 90dB
Weight: 32 gm
5V USB Aluminium Body Power Bank Case for 18650 Battery
SKU: AI2162 ₹122.72 (₹104.00 + GST)Quick review :5V USB Aluminium Body Power Bank Case for 18650 Battery
- Input Power: 5V DC at up to 1.5A
- Output Power: 5V DC at up to 1A
- Stabilised Output Power
- Stylish and Compact aluminium Case.
- Nice Powder coating painted colours
HX711 Dual-Channel 24 Bit Precision A/D Weight Pressure Sensor Module
SKU: AI0305 ₹50.74 (₹43.00 + GST)Quick Overview
- Output Sensitivity: 1.0 ± 0.1 mV / V.
- Two selectable differential input channels.
- On-chip active low noise PGA with the selectable gain of 32, 64 and 128.
- On-chip oscillator requiring no external component with optional external crystal.
- On-chip power-on-reset.
- Measurement Resolution: 24 bit.
R5F102AAASP#30 Microcontroller ICs
SKU: AI0505 ₹94.40 (₹80.00 + GST)
R5F102AAASP#30 The R5F102AAASP#30 is a 16-bit microcontroller (MCU) from Renesas Electronics, part of the RL78/G12 series. This MCU offers an affordable, energy-efficient solution for a wide range of embedded system applications.
Add to Compare
DS1307 RTC I2C Module AT24C32 without Battery
SKU: AI0106 ₹38.00 (₹32.20 + GST)Interface: Two-wire I2C
Output Pin: 1Hz
Memory: 56 bytes non-volatile RAM
Battery: LIR2032 (included)
Operating Voltage: Standard 3V lithium cell (2V to 3.5V)
Package Options: 8-pin DIP or SOIC
Operating Temperature: Suitable for various environments
Dimensions: Compact and space-saving design
XT30 Male & Female Connector
SKU: AI4446 ₹29.50 (₹25.00 + GST)XT30 Male & Female Connector
Gold plated Connections
Long connection contact points for better current flow
Small and light weight
Weight: 0.7g male, 0.9g female, 1.7g as a set
Size: Male = 16.67×10.59×5.29mm , Female=14.48×10.62×5.65mm
High Current Active Alarm Buzzer Driver Module
SKU: AI0112 ₹28.79 (₹24.40 + GST)Operating voltage 3.3V-5V
PCB Dimensions: 29 (L) x 14 (W) x 12 mm (H)
Wire length: 20cm
Weight: 7 gm.
Frequency: 2500Hz
Soil Moisture Hygrometer Detection Humidity Sensor Module
SKU: AI0071 ₹30.68 (₹26.00 + GST)Dual output mode, analog output more accurate
A fixed bolt hole for easy installation
With power indicator (red) and digital switching output indicator (green)
Having LM393 comparator chip, stable.
Operating Voltage: 3.3V~5V
MH-SR602 Mini Motion Sensor Detector Module For Arduino
SKU: AI0242 ₹68.44 (₹58.00 + GST)Quick Overview
- Sensing Distance: 3M-5M
- Power supply DC: 3.3V-15V
- Quiescent current: 20uA
- Delay: Adjustable
- Output: high level, H=3.3V, L=0V
TTL to RS485 Power Supply Converter Board 3.3V 5V Hardware Auto Control Module
SKU: AI0527 ₹88.50 (₹75.00 + GST)
QUICK OVERVIEW
- Anti-Interference Ability
- Baud rate: 110 ~ 256000bps
- Operating Voltage: 3v to 30VDC
- Compatible With Both 3V and 5V logic
TXS0108E High Speed Full Duplex 8 Channel Logic Level Converter
SKU: AI0101 ₹48.38 (₹41.00 + GST)Quick Overview
- VCCA Voltage level: 1.2V-3.6V
- VCCB Voltage level: 1.65V-5.5V
- It can provide 3.3-5V, 1.8-3.3V level conversion
- Dimension Approx: 26.4 x 16.2 mm
- PCB Color: Blue
- 8-bit bi-directional 3.3V-5V/5V-
- 3.3V logic level converter board
- Serial communication interface compatible with UART/IIC/SPI port easily to connect
AT89S52-24PU DIP-40 Microcontroller
SKU: AI0104 ₹103.84 (₹88.00 + GST)Quick Overview
- 8K Bytes of In-System Reprogrammable Flash Memory
- Endurance: 1,000 Write/Erase Cycles
- Fully Static Operation: 0 Hz to 33 MHz
- Three-level Program Memory Lock
- 256 x 8-Bit Internal RAM
- 32 Programmable I/O Lines
- Three 16-bit Timer/Counters
- Eight Interrupt Sources
- Programmable Serial Channel
- Low Power Idle and Power Down Modes
Nano CH340 Chip Board Compatible with Arduino (Soldered)
SKU: AI0030 ₹283.20 (₹240.00 + GST)
Operating Voltage (logic level): 5V
8 analog inputs ports: A0 ~ A7
14 Digital input / output ports: TX, RX, D2 ~ D13
1 pair of TTL level serial transceiver ports RX / TX
Using Atmel Atmega328P-AU MCU
There is a bootloader installed in it
Standard 0.1” spacing DIP (breadboard friendly).
Manual reset switch.
Add to Compare
Note: - CH340 chip might not work directly with some PC/Laptop, you will need some ch340 drivers.
I2C ADS1115 16 Bit ADC 4 channel Module with Programmable Gain Amplifier
SKU: AI1463 ₹127.44 (₹108.00 + GST)- Wide Supply Range: 2.0v To 5.5v
- Low Current Consumption
- Continuous Mode: Only 150µa Single-shot
- Auto Shut-down
- Programmable Data Rate: 8SPS to 860SPS
- It has Internal low-drift voltage reference
NEO-6M GPS Module with EPROM
SKU: AI0141 ₹266.68 (₹226.00 + GST)5Hz position update rate.
The cold start time of 38 s and Hot start time of 1 s.
Configurable from 4800 Baud to 115200 Baud rates. (default 9600).
SuperSense ® Indoor GPS: -162 dBm tracking sensitivity.
Support SBAS (WAAS, EGNOS, MSAS, GAGAN).
Separated 18 x 18mm GPS antenna.
TM1637 4 Bits Digital Tube LED Display Module with Clock Display(Red)
SKU: AI0107 ₹60.18 (₹51.00 + GST)Quick Ovceview
- Driver Chip: MAX7219
- Input Voltage: 3.7 to 5.3 V
- Input Current: 30 mA
1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V to 5V DC-DC Boost Converter Step-Up Module
SKU: AI0590 ₹23.25 (₹19.70 + GST)QUICK OVERVIEW
- Input voltage 0.8-3.3V output voltage 3.3V
- Maximum output current: 500 mA
- Starting voltage 0.8V, output current 10mA
- Input more than 3 v, and have spent 5V output of 400-400 mA
- Operating frequency: 150KHZ
- Typical conversion efficiency: 85%
44E A1344EUA-T Hall
SKU: AI2985 ₹9.46 (₹8.02 + GST)44E A1344EUA-T Hall
Digital Output Hall-effect sensor.
Operating voltage: typically 5V.
Output Current: 25mA.
It can be used to detect both the poles of a magnet.
8mm Bore Inner Ball Mounted Pillow Block Insert Bearing KP08
SKU: AI1459 ₹63.72 (₹54.00 + GST)QUICK OVERVIEW
- Type: KP08
- Material: zinc alloy
- Bore Diameter:8mm
- Mounting Hole Diameter: 5 mm
- Durable with high precision
- Can withstand great weight
Microswitch KW10-Z1P Limit Switch 1A 125V AC (Pack of 2)
SKU: AI0181 ₹26.31 (₹22.30 + GST)- Max. Switching voltage: 125 V
- Max. switching current: 1 A
- Max. switching frequency per minute: 60
- Contacts: NO, NC, COM
- Contact resistance: 100 mΩ
TP4056 1A Li-ion Lithium Battery Charging Module With Current Protection-Mini USB
SKU: AI0262 ₹33.51 (₹28.40 + GST)Quick Overview
- Input interface: Mini USB.
- Current: 1A adjustable.
- Charge precision: 1.5%.
- Input voltage: 4.5V-5.2V.
- Full charge voltage: 4.2V.
- Battery over-current protection: 3 A
- The battery Undervoltage protection: 2.5 V
49E Hall
SKU: AI2986 ₹11.56 (₹9.80 + GST)
49E Hall
Operating Supply Voltage: 3 V to 6.5 V;
Operating Supply Current: 3.5 mA;
Maximum Output Current: 10 mA
Add to Compare
18AWG extrasoft Silicone Wire (1m)
SKU: AI4533 ₹23.52 (₹22.40 + GST)18AWG extrasoft Silicone Wire (1m):
Wire gauge: 18AWG
Length: 1m
color: red
Rated Voltage: 600V
Rated Temperature: -60°C~+200°C
Conductor: Tinned Copper
Conductor construction: 150/0.08
Insulation: Silicone Rubber
Note: Wire will also made available as per requirement
OMRON 3D Printer Limit Switch ENDSTOP SS-5GL
SKU: AI0094 ₹47.20 (₹40.00 + GST)Omron micro switch-quality original
Lifetime: 30 million
Rated voltage:125V
Rated current: 5A
Dissipation Power: IC
Supply voltage: IC
Model number: SS-5GL
LM386 Audio Amplifier Module
SKU: AI0604 ₹39.18 (₹33.20 + GST)Onboard LM386 Chip.
200 multiplier benefits circuit design.
On-board speaker wiring Block.
On-board 10K variable resistor, you can adjust the volume of the enlarged.
Onboard Power Indicator.
ZB2L3 18650 Li-ion Lithium Battery Capacity Tester
SKU: AI3512 ₹152.22 (₹129.00 + GST)QUICK OVERVIEW:
- 18650 Li-ion Battery Capacity Tester.
- Can Support Maximum Capacity up to 9999Ah (9999000Mah)
- Bright Display to Display The Capacity
- Small Size Board.
ZMPT101B 2mA AC Single Phase Voltage Transformer Sensor Relay
SKU: AI0684 ₹87.32 (₹74.00 + GST)Low price
Small size (49.5mm x 19.4mm) and lightweight
Easy PCB mounting
Good consistency
Widely acclaimed.
A3144 Hall Effect Sensor Module
SKU: AI0310 ₹29.62 (₹25.10 + GST)
Digital Output Hall-effect sensor.
Operating voltage: typically 5V.
Output Current: 25mA.
It can be used to detect both the poles of a magnet.
Add to Compare
5V Step-Up Power Module Lithium Battery Charging Protection Board
SKU: AI0013 ₹25.25 (₹21.40 + GST)BAT Discharging Stop Voltage:2.9V
Discharging Efficiency:85%(input 3.7V output 5V/1A)
Charging and discharging indication
Internally installed charging and discharging power MOS
Preset 4.2V charging voltage, precision ±1%
Max 8uA standby current
Integration charging management and discharging management
Intelligent temperature control and overtemperature protection
Integration output overvoltage protection, short circuit protection, overload protection
IRLZ44N Mosfet Ic Dip-3 Package
SKU: AI5949 ₹38.59 (₹32.70 + GST)- IC Name: IRLZ44N
- Package/Case: DIP-3
MAX4466 Electret Microphone Amplifier with Adjustable Gain Module
SKU: AI0303 ₹99.12 (₹84.00 + GST)Quick Overview
- Supply Voltage Operation: +2.4V to +5.5V.
- Versions with 5nA Complete Shutdown Available only (MAX4467/MAX4468).
- Excellent Power-Supply Rejection Ratio: 112dB.
- Excellent Common-Mode Rejection Ratio: 126dB.
- High AVOL: 125dB (RL = 100kΩ).
TP4056 1A Li-Ion Battery Charging Board Micro USB with Current Protection
SKU: AI5197 ₹10.86 (₹9.20 + GST)- Dimension: 25 x 19 x 10 (LxWxH)mm.
- Input interface: micro USB.
- Current Protection: Yes
- Charging mode: Linear charging.
- Current: 1A adjustable.
- Charge precision: 1.5%.
- Input voltage: 4.5V-5.5V.
- Full charge voltage: 4.2V.
Nano Board R3 with CH340 Chip without USB Cable Compatible with Arduino (Unsoldered) without USB Cable Compatible with Arduino (Unsoldered)
SKU: AI0396 ₹220.66 (₹187.00 + GST)Quick Overview
- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- Standard 0.1” spacing DIP (breadboard friendly).
8mm Inner Diameter Zinc Alloy Pillow Block Flange Bearing KFL08
SKU: AI1438 ₹83.78 (₹71.00 + GST)QUICK OVERVIEW
- Model Number: KFL08
- Material: Zinc Alloy
- Inner diameter: 8mm
- Length: 48mm
- Height: 12mm
- Weight: 26.4g
3S 10A 12V 18650 Lithium Battery Charger Board Protection Module
SKU: AI0566 ₹51.45 (₹43.60 + GST)Quick Overview:
- Over-discharge voltage range: 2.3–3.0V ± 0.05V
- Recharge voltage range: 4.25–4.35V ± 0.05V
- Operating current: 6–8A
- Operating temperature: -40 to +50℃
- Current limit: 10–13A
10 x 10 cm Universal PCB Prototype Board Single-Sided 2.54mm Hole Pitch
SKU: AI1436 ₹75.52 (₹64.00 + GST)QUICK OVERVIEW
- Dimension: 10×10 cm
- Type: Single Sided
- Quantity: 1 Pcs.
- Base Material: FR4
- Copper Thickness: 1-4 OZ
- Board Thickness: 1.6
DC 12V Relay with Adjustable Delay Time Signal Triggering Switch Module
SKU: AI0321 ₹116.82 (₹99.00 + GST)Quick Overview:
- Module based on: NE555 chip.
- Precision Pulse Generation / Timing.
- Adjustable Duty Cycle.
- Monostable Operation.
- Standby no power consumption
- Countless Application and Information Sources.
- Time can be adjusted by a potentiometer, the default is 0-25 seconds.
- Module supplies a diode with an anti-power reverse connection.
0.96 Inch I2C/IIC 4pin OLED Display Module (Blue)
SKU: AI0263 ₹213.58 (₹181.00 + GST)Quick Overview
- Display size: 0.96″
- Resolution radio:128 x 64
- Interface modes: I2C/IIC
- Working voltage: 3.3V
- Control Chip: SSD1306
- Dimension : 2 x 2 cm
DHT-11 Temperature And Humidity Sensor Module
SKU: AI0070 ₹83.78 (₹71.00 + GST)Quick Overview
- Power Supply： 3.3~5.5V DC
- Output： 4 pin single row
- Measurement Range： Humidity 20-90%RH， Temperature 0~50℃
- Accuracy： Humidity +-5%RH， Temperature +-2℃
- Resolution： Humidity 1%RH， Temperature 1℃
- Interchangeability： Fully Interchangeable
- Long-Term Stability： <±1%RH/year
Black R13-507 16MM 2PIN Momentary Self-Reset Round Cap Push Button Switch
SKU: AI3401 ₹18.88 (₹16.00 + GST)QUICK OVERVIEW:
- Self-locking/Latching Self-reset
- Good electrical conductivity
- This is Momentary type push-button switch
- Easy to use
- Light Weight
- Function: Momentary
,
- Self-locking/Latching Self-reset
- Good electrical conductivity
- This is Momentary type push-button switch
- Easy to use
- Light Weight
- Function: Momentary
400WDC-DC High-Power Constant Voltage Constant Current Boost Power Module LED Boost Driver Laptop Battery Charging
SKU: AI3906 ₹191.16 (₹162.00 + GST)QUICK OVERVIEW:
- Super material: It is made of electronic accessories, nickel plating on surface(anti-oxidatioan), inner conductor: pure copper.it is long lasting and durable for you to use.
- Package including: 1 Pack of Constant Current Voltage Module. Moreover. The buck module has 2 heat sinks that could enhance heat dissipation. When there is a big difference between input and output voltage, please decrease power and current. With LED indicator, more stable and reliable to use.
- Input and output: Input voltage: DC8.5V-50V. Input current: 15A (MAX) over 8A, please strengthen heat dissipation. Static working current: 10mA. Output voltage: 10-60V continuously adjustable. Output current: 12A MAX, more than 7A, please strengthen heat dissipation. Constant current range: 0.2-12A. Output power: = input voltage*10A, such as: input 12V*5A=60W, input 24V*5A=120W, Input 36V*5A=180W, input 48V*5A=240W. Working temperature: -40~+85 degrees.
- High Power High Efficiency: High conversion efficiency up to 96%. High efficiency and low ripple with power indicator. In addition to the current limiting and voltage regulation function. High reliability, strong vibration resistance, good electromechanical performance.
- A wide range of applications: Widely uses in power transformer, DIY adjustable power supply, LED car display, mobile power, industrial equipment appliances, LED driver, monitor, solar energy, fan, battery conversions, micro-controllers, and electronic projects. so on. Maintain stable output voltage and limit the output current over a range of input voltages.
Towerpro MG90S Mini Digital 180 Degree Servo 2.2kg / 0.08sec / 13g
SKU: AI0092 ₹161.66 (₹137.00 + GST)Quick Overview
- Model: MG90S
- Weight: 13 grams
- Operating Voltage: 4.8V to 6.6V
- Servo Plug: JR
- Stall Torque @4.8V: 1.8kg-cm
- Stall Torque @6.6V: 2.2kg-cm
- Rotation: 180 degrees
USB Charger Doctor (Voltmeter Ammeter)
SKU: AI0057Compact and easy to carry, no additional power supply, plug, and play.
It can easily measure the output voltage of the USB port and the device operating current or load voltage
Detect any USB charger such as PC USB, home charger, car charger.
Operating Voltage: 3 to 20V
Maximum Current: 3 A
3.3V Adapter Board for 24L01 Wireless Module
SKU: AI0728 ₹32.57 (₹27.60 + GST)It can be used with NRF24L01 wireless module
Add core nRF24L01+ Breakout Adapter with onboard 3.3V Regulator
Onboard 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached nRF24L01+ module
Allows for easy connection to nRF24L01+ modules
Small power on SMD LED indicator
Free Shipping
On orders above ₹999
COD Available
Min. order ₹250 for COD
GST Invoice
Available on all orders
1,50,000+ Orders
Delivered across India
Expert Support
Toll Free: 1800 209 0998
Product categories
- 3D Printers and Parts (379)
- Batteries, Chargers and Accessories (811)
- Clearance Sale (0)
- Development Boards (438)
- DIY Learning and Robot Kits (117)
- Drone Parts (1364)
- EBike parts (140)
- Electronic Components (783)
- Electronic Modules and Displays (1201)
- FPV Freestyle Mid/High KV Drone Motors (0)
- IoT and Wireless (544)
- Mechanical Parts and Workbench Tools (241)
- Motors & Drivers & Pumps & Actuators (583)
- Sensor Modules (639)