QUICK OVERVIEW:
LM393 based design.
Can detect ambient brightness and light intensity.
Adjustable sensitivity (via blue digital potentiometer adjustment).
Output Digital – 0V to 5V, Adjustable trigger level from preset.
LEDs indicating output and power.
Operating Voltage: 3.3V to 5V DC.
Operating Current: 15ma.
The 41F is a switched Hall-effect IC designed for contactless switching applications. It incorporates various components on a single chip, including an on-chip Hall voltage generator for magnetic sensing, an amplifier to amplify the Hall voltage, a Schmitt trigger to provide switching hysteresis for noise rejection, and an open-collector output. This integrated design allows for precise and reliable switching in response to changes in magnetic fields without the need for physical contact, making it suitable for a wide range of applications requiring non-contact switching functionality.
QUICK OVERVIEW:
Working Voltage: 3.5 to 24V DC (min tested working voltage 3.5V).
Max current draw: 15mA @ 5V.
Working Flow Rate: 1 to 30 Liters/Minute.
Maximum water pressure: 1.75 MPa.
Flow rate pulse characteristics: Frequency (Hz) = 7.5 * Flow rate (L/min).
QUICK OVERVIEW:
Current Ratio: 5 A:5 mA
Rated Primary Current at 50/60 Hz: 5 A
Winding D.C. Resistance at 20 °C: 155 Ω
Maximum Primary Current at 50/60 Hz: 20 A
Transformer Turns Ratio: Np:Ns = 1000:1
Digital I2S interface with high precision 24-bit data
High signal to noise ratio is 61 dBA
High sensitivity – 26 dBFS
Stable frequency response from 60 Hz to 15 kHz
Low power consumption: low current consumption 1.4 mA
High PSR: -75 dBFS
QUICK OVERVIEW:
Working voltage: DC 3.3-5V.
IC Chip: LM393
Signal output indication.
The output is digital.
Single channel signal output.
With the retaining bolt hole, convenient installation.
Output low level and the signal light when there is sound.
Adjustable wrist strap with alligator clip tip.
Inner conducting layer made of stainless shell filaments.
Durable Polyurethane-Coated Coil Cords.
High-Quality Strain relief.
The soft elastic band comfort.
Rinsing Resisting.
Contact Rating: 10 W.
Switching Voltage: 220 V.
Switching Current: 0.5 A.
Breakdown Voltage: 220 VDC.
Carry Current: 1 A.
Contact Resistance: 100 mΩ.
Working Voltage : 3 – 5.5V.
The maximum Current : 49mA 5V.
Range : 20cm to 800 cm
Model No.: XH-W3001
Operating Voltage Range: 6 to 12V
Rated Power (W): 120W
Rated Current: 10 Amp Max.
Measurement Input: NTC10K
Temperature Measuring Range:-50C~110C
Temperature Control Range:-50C~110C
Control Accuracy: Upto 0.1
Measuring Accuraccy: 0.2
QUICK OVERVIEW
Voltage: DC 2.4V – 5V
Average Current Consumption: < 2mA
Output mode: level or UART
Detection distance: 2cm – 450cm
Working temperature: -20°C to +70°C
It features temperature compensation.
Provides two output modes level or UART.
Quick review :
High Photo Sensitivity
Fast Response Time
Sensitivity adjustable
Detects a flame or a light source of a wavelength in the range of 760nm-1100 nm.
Detection range: up to 100 cm.
Adjustable detection range.
Detection angle about 60 degrees, it is sensitive to the flame spectrum.
Comparator chip LM393 makes module readings stable.
Operating voltage 3.3V-5V.
Digital and Analog Output.
QUICK OVERVIEW:
Made From High-Quality Materials.
Electronic High-Frequency Oscillations (2.4MHz).
Material: Ceramic, Wire
Diameter: Atomizer: 2cm/0.79in; Sealing ring: 2.5cm/0.98in
Model number: TEC1-12715
Operating Voltage: 12V
Maximum Voltage- Umax (V) : 15V
Maximum Current- Imax (A) : 15A
Maximum Power : 230 W
Power Cord: 25cm.
QUICK OVERVIEW
Capacity (Kg): 50.
Output Sensitivity (mv/v): 1.0±0.1.
Nonlinearity (%FS): 0.03.
Repeatability (%FS): 0.03.
Input Resistance (Ω): 1000.
Insulation Resistance (MΩ): ≥5000.
QUICK OVERVIEW:
Measuring range: temperature -40-80 ℃; humidity 0; 99.9%RH
Measurement accuracy (25℃): temperature: + 0.5; humidity: + 2%RH (10; 90%RH)
Resolution: temperature: 0.1 ℃, humidity: 0.1%RH
Attenuation value: temperature: <1℃ / year; humidity: < 1%RH/ years
High precision
Capacitive type
Detection distance: 2-40cm
IO Interface: 4-wire interfaces (- / + / S / EN)
Output signal: TTL level
Adjustment: adjust multi-turn resistance
Effective angle: 35 °
QUICK OVERVIEW:
QUICK OVERVIEW:
Capacity: 10KG
Rated output(MV/V): 2.0±0.15
Accuracy class: C2
Maximum number of laod cell verification intervals(N max): 2000
Minimum number of laod cell verification intervals(Vmin): EMax/5000
Combined error(%RO): <±0.030
Creep(%RO/30min): 0.03
Temperature effect on sensitivity(%RO/°C): 0.0016
Temperature effect on zero(%RO/°C): 0.003
Zero balance(%RO): 1.0
Input resistance(O): 402±6
Output resistance(O): 350±3
QUICK OVERVIEW
QUICK OVERVIEW:
QUICK OVERVIEW:
LC 5A Over-current protection Sensor module uses a current transformer to collect the AC signal to achieve the relay over-current signal output within 0-5A. Relay pull while over-current, relay released while not over-current
QUICK OVERVIEW
Material: Acrylic
Dimensions: 50 x 40 x 18 (LxWxH) mm.
Weight: 8 gm
QUICK OVERVIEW
Power supply voltage: DC5 ± 2V
Sensitivity: 0.5V / (0.1mg / m3)
The minimum detection level of particles: 0.8 m
Clean air voltage: 0.9V typ.
Low consumption current (Icc: MAX. 20 mA)
The presence of dust can be detected by the photometry of only one pulse
Enable to distinguish smoke from house dust
S49E hall sensor
Features wide-range voltage comparator LM393.
Signal output indicator.
Analog / Digital output
On orders above ₹999
Min. order ₹250 for COD
Available on all orders
Delivered across India
Toll Free: 1800 209 0998