Output type: AC Output (AC 220V 1500W).
Temperature setting upper and lower limits.
Simple operation, suitable for seafood machines.
Temperature Measuring Range: -50~110°C.
Temperature Control Range: -50~110°C.
Control Accuracy: Upto 0.1℃.
Dual output mode, analog output more accurate
A fixed bolt hole for easy installation
With power indicator (red) and digital switching output indicator (green)
Having LM393 comparator chip, stable.
Operating Voltage: 3.3V~5V
Suitable for Remote Applications
• Low-Cost Due to Wafer-Level Trimming
• Operates From 4 V to 30 V
• Less Than 60-μA Current Drain
• Low Self-Heating, 0.08°C in Still Air
• Non-Linearity Only ±¼°C Typical
QUICK OVERVIEW:
Operating Voltage : 5v
Temperature measurement range : -55°C to 125°C.
Measurement Accuracy : ±0.5°C.
QUICK OVERVIEW
QUICK OVERVIEW
QUICK OVERVIEW:
Humidity measuring range: 20%~90%RH(0~50 degree
Temperature measuring range: 0~+50degree.
Humidity measurement accuracy: ±5.0%RH.
Temperature measurement accuracy: ±2.0degree.
Low power consumption.
Relative humidity and temperature measurement
All calibration, digital output
Excellent long-term stability
Operating Voltage: 3.5V-5V
Supply Current: 15mA
Optimal Sensing Distance: 3mm
Designed with the reflected infrared sensor, indicator light.
Built in a potentiometer for sensitivity control.
On-board LM393 voltage comparator chip and infrared sensing probe TCRT5000L
Signal detection sensitivity can adjust
Reserve all the way more circuits (P3 voltage drawn)
Voltage: 12v/24v
Power: 3A
Delay time: 20-60s
Detecting range: 120 degrees
Detecting distance: 1-3m
QUICK OVERVIEW:
LM393 based design.
Can detect ambient brightness and light intensity.
Adjustable sensitivity (via blue digital potentiometer adjustment).
Output Digital – 0V to 5V, Adjustable trigger level from preset.
LEDs indicating output and power.
Operating Voltage: 3.3V to 5V DC.
Operating Current: 15ma.
Current Ratio: 5 A:5 mA
Rated Primary Current at 50/60 Hz: 5 A
Winding D.C. Resistance at 20 °C: 155 Ω
Maximum Primary Current at 50/60 Hz: 20 A
Transformer Turns Ratio: Np:Ns = 1000:1
QUICK OVERVIEW:
Working voltage: DC 3.3-5V.
IC Chip: LM393
Signal output indication.
The output is digital.
Single channel signal output.
With the retaining bolt hole, convenient installation.
Output low level and the signal light when there is sound.
Adjustable wrist strap with alligator clip tip.
Inner conducting layer made of stainless shell filaments.
Durable Polyurethane-Coated Coil Cords.
High-Quality Strain relief.
The soft elastic band comfort.
Rinsing Resisting.
Contact Rating: 10 W.
Switching Voltage: 220 V.
Switching Current: 0.5 A.
Breakdown Voltage: 220 VDC.
Carry Current: 1 A.
Contact Resistance: 100 mΩ.
Model No.: XH-W3001
Operating Voltage Range: 6 to 12V
Rated Power (W): 120W
Rated Current: 10 Amp Max.
Measurement Input: NTC10K
Temperature Measuring Range:-50C~110C
Temperature Control Range:-50C~110C
Control Accuracy: Upto 0.1
Measuring Accuraccy: 0.2
Probe sheath material: Stainless Steel
Style: B3950 10K
Resistance value: 10K ± 1%
Measurement range: -20 to 105 °C
Cable Length: 0.5 Meter
Voltage: DC 2.4V – 5V
Average Current Consumption: < 2mA
Output mode: level or UART
Detection distance: 2cm – 450cm
Working temperature: -20°C to +70°C
It features temperature compensation.
Provides two output modes level or UART.
Working Voltage : 3 – 5.5V.
The maximum Current : 49mA 5V.
Range : 20cm to 800 cm
Quick review :
High Photo Sensitivity
Fast Response Time
Sensitivity adjustable
Detects a flame or a light source of a wavelength in the range of 760nm-1100 nm.
Detection range: up to 100 cm.
Adjustable detection range.
Detection angle about 60 degrees, it is sensitive to the flame spectrum.
Comparator chip LM393 makes module readings stable.
Operating voltage 3.3V-5V.
Digital and Analog Output.
QUICK OVERVIEW:
On orders above ₹999
Min. order ₹250 for COD
Available on all orders
Delivered across India
Toll Free: 1800 209 0998