5V/7-28V 8 Channels Bluetooth Relay Module Development Board
SKU: AI3765
DC7-28V/5V
4M Byte Flash
Board size: 148*79.8mm
Weight: 140g
Add to cart
Add to Compare
6 Channel 3-24V Relay Module Solid State High Level SSR DC Control DC with Resistive Fuse
SKU: AI3689
QUICK OVERVIEW:
Add to cart
Add to Compare
- Power supply:3-24VDC/160mA
- Trigger Voltage (VDC):3-24 V
- Isolation: Phototriac
6 Channel 24V Relay Module Solid State Low Level SSR DC Control 250V 2A with Resistive Fuse
SKU: AI3688
Has been assembled, and the electrical test passed.
Led indicator for each relay.
Use it to control various appliances and other equipment with a large current.
It can be controlled directly by a Microcontroller
Input control signal voltage:
0-2.5V status low level, relay OFF
3-5V status high level, relay ON
Add to cart
Add to Compare
6-30V 1-Channel Power Relay Module with Adjustable Timing Cycle
SKU: AI0096 ₹102.66 (₹87.00 + GST)
QUICK OVERVIEW
Add to Compare
- Operating voltage: 6-30V
- Time interval:0.1 s (minimum) ~ 999 min (maximum) continuously adjustable.
- Trigger Signal Source: High-Level Trigger (3.0 V-24 V)
- Output Capacity: can control no more than DC 30V 5A AC or 220 V devices 5A
- Optocoupler Isolation.
DC 12V Relay with Adjustable Delay Time Signal Triggering Switch Module
SKU: AI0321 ₹116.82 (₹99.00 + GST)Quick Overview:
- Module based on: NE555 chip.
- Precision Pulse Generation / Timing.
- Adjustable Duty Cycle.
- Monostable Operation.
- Standby no power consumption
- Countless Application and Information Sources.
- Time can be adjusted by a potentiometer, the default is 0-25 seconds.
- Module supplies a diode with an anti-power reverse connection.
NE555 Time Delay Monostable Switch Module 12V
SKU: AI0088 ₹54.28 (₹46.00 + GST)
Module based on the NE555 chip.
Input voltage: DC 12V
Adjustable time: 0-10 s
AC Control voltage: 250V/max. 10A
DC Control Voltage: 30V/max. 10A
Max. load: 2200W
Add to Compare
5V 2 Channel Relay Module
SKU: AI0084 ₹83.78 (₹71.00 + GST)Quick Overview
- 2 Channels
- Maximum switching voltage: 250VAC / 30VDC
- Maximum switching current: 10A
- Each relay features an LED indicator.
- Dimensions: 51 x 39 x 18mm (Length x Width x Height)
Timing Delay Switch Circuit with Double MOSFET Control
SKU: AI2753 ₹129.80 (₹110.00 + GST)Wide voltage power supply (6~30V)
supports micro USB 5.0V power supply
The interface is clear and simple, powerful, easy to understand
All set parameters automatically save power.
1 channel 5V 10A Relay Control Board Module with Optocoupler
SKU: AI0902 ₹56.64 (₹48.00 + GST)
Channel: 1 channel
Relay Voltage: 5V
High impedance controller pin
Pull-down circuit for the avoidance of malfunction
One normally closed contact and one normally open contact
Triode drive, increasing relay coil
1 Road/Channel Relay Module (with light coupling) 12V
SKU: AI0832 ₹70.80 (₹60.00 + GST)
Operating Voltage: 12V DC
Equipped with high-current relay 10A@250VAC / 10A@30VDC
It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
Freewheeling diode to protect your microcontroller
Input Signal Pin connected to Burg stick for easy accessibility
LED Status indicators to indicate the relay ON/OFF status
Mounting holes provided
Add to Compare
D4184 Mosfet control Module Replacement Relay
SKU: AI2432 ₹38.47 (₹32.60 + GST)QUICK OVERVIEW:
- Model: D4184
- MOS tube: 40V 50A
- Dimensions: 32.6mm X 16.5mm
- Mounting Holes Diameter: 2mm
- Compatible with MCU and control board, 3V or 5V signal.
- High-level start, low-level stop, PWM speed regulation.
PC817 2 CH Optocoupler Isolation Module
SKU: AI5225 ₹70.80 (₹60.00 + GST)- I/O Isolation for MCUs (Micro Controller Units)
- Noise Suppression in Switching Circuits
- Driving Port Signal Voltage: 3.6-24V
- Output Port Voltage Port: 3.6-30V
- Output Can Be Switched From Pull-Up or Pull-Down With Jumpers.
A03B 1 Road 5V Low Level Solid State Relay Module with Fuse SSR 250V 2A Fuse
SKU: AI0320 ₹94.40 (₹80.00 + GST)Trigger voltage: 5VDC
Trigger current: 2mA
Switching Voltage: 240VAC@2A
Triggering: Low-level
XH-M131 DC 12V Light Control Switch Photoresistor Relay Module
SKU: AI2770 ₹113.28 (₹96.00 + GST)QUICK OVERVIEW:
- Material – Steel, Plastic, PVC
- Power Supply – DC 12V
- Operating Current – Before the relay actuation: less than 5mA
Relay after pull-in: 5V module is less than 50mA - Switching Voltage: 250VAC@10A; 30VDC@10A
ESP8266 WiFi 5V 1 Channel Relay Module
SKU: AI0352 ₹224.20 (₹190.00 + GST)Quick Overview:
- Onboard Module: ESP8266 WiFi module; in AP mode it can connect with 5 Clients at the same time
- Operating Way:
- Cellphone connected directly to the WiFi module
- Cellphone and WiFi module connected to the same router, and use the APP to control relay
- Transmission Distance: 400m (max)
- Relay: 5V, 10A / 250V AC, 10A / 30V DC
- Baud Rate: 9600
- Diode effusion protection
- Short response time
12V Dual Channel Relay Module (with Light Coupling)
SKU: AI0335 ₹93.22 (₹79.00 + GST)Operating Voltage: 12V DC
Two separate LEDs for On/Off indication of the Relay
Triggering input voltage 3.3V – 5V 4)
Back EMF protection
Equipped with high-current relay 10A@250VAC / 10A@30VDC
It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
Freewheeling diode to protect your microcontroller
Input Signal Pin connected to Burg stick for easy accessibility
Mounting holes provided
PC817 4 CH Optocoupler Isolation Module
SKU: AI5214 ₹109.74 (₹93.00 + GST)- I/O Isolation for MCUs (Micro Controller Units)
- Noise Suppression in Switching Circuits
- Driving Port Signal Voltage: 3.6-24V
- Output Port Voltage Port: 3.6-30V
- Output Can Be Switched From Pull-Up or Pull-Down With Jumpers.
1 channel 5V 30A Relay Module Power Failure Relay
SKU: AI0663 ₹141.60 (₹120.00 + GST)Quick Overview
- Trigger Voltage: 5VDC
- Switching Voltage: 250VAC@30A; 30VDC@30A
- The module can be set high level or low-level trigger by the jumper
24V 4-Channel Relay Module (with Light Coupling)
SKU: AI0322 ₹180.54 (₹153.00 + GST)Operating Voltage: 24V DC
Two separate LEDs for On/Off indication of the Relay
Triggering input voltage 3.3V – 5V 4)
Back EMF protection
Equipped with high-current relay 10A@250VAC / 10A@30VDC
It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
Freewheeling diode to protect your microcontroller
Input Signal Pin connected to Burg stick for easy accessibility
Mounting holes provided
1 Channel 12V 30A Relay Module with Optocoupler and Guide Rail
SKU: AI0662 ₹332.76 (₹282.00 + GST)
Channel: 1 channel
Comes with GUIDE RAIL
Relay Voltage: 12V
High impedance controller pin
Pull-down circuit for the avoidance of malfunction
One normally closed contact and one normally open contact
Triode drive, increasing relay coil
Add to Compare
1 Channel Relay Module, 30A with Optocoupler, Isolation 24V Supports, High and Low Triger
SKU: AI3140 ₹182.90 (₹155.00 + GST)- Channel: 1 channel
- Relay Voltage: 24V
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
433MHz 5V 1 Channel Relay Module Wireless Remote Control Switch without Battery
SKU: AI0759 ₹357.54 (₹303.00 + GST)Operating voltage: DC 5V
Operating temperature: -40~80 degrees
Operating frequency: 433MHZ Receive sensitivity: ≥-95dB
Working Mode: jump switch, point action, self-locking, and interlocking(adjustable)
2 Channel Relay Module 30A with Optocoupler Isolation 5V Supports High and Low Triger
SKU: AI2963 ₹363.44 (₹308.00 + GST)QUICK OVERVIEW:
- Supply Voltage: DC 5V
- Quiescent Current: 5mA
- Maximum Operating Current: 190mA
- Trigger Mode: High and low-level trigger
- Load Voltage: DC 30V / AC250
- Load Current: 30A
- Relay Life: more than 100,000 times
433MHz 12V 1 Channel Relay Module Wireless Remote Control Switch with Battery
SKU: AI0821 ₹376.42 (₹319.00 + GST)
Operating voltage: DC 12V
Operating temperature: -40~80 degrees
Operating frequency: 433MHZ Receive sensitivity: ≥-95dB
Working Mode: jump switch, point action, self-locking, and interlocking(adjustable)
Add to Compare
1 Channel Relay Module, 30A with Optocoupler, Isolation 5V Supports, High and Low Triger
SKU: AI1050 ₹187.62 (₹159.00 + GST)Channel: 1 channel
Comes with GUIDE RAIL
Relay Voltage: 5V
High impedance controller pin
Pull-down circuit for the avoidance of malfunction
One normally closed contact and one normally open contact
Triode drive, increasing relay coil
XH-M131 DC 5V Light Control Switch Photoresistor Relay Module
SKU: AI2769 ₹94.40 (₹80.00 + GST)QUICK OVERVIEW:
- Module Name: Photosensitive Relay Module
- Input Voltage: 5V DC
- Load capacity: 10A (Max)
- Output Type: Output Switch
- Control Frequency:1 MHz
XY-LJ02 6-30V Micro USB, Digital LCD Display Time, Delay Relay Module, Control Timer Switch, Trigger Cycle Timing
SKU: AI2198 ₹362.26 (₹307.00 + GST)
Quick review :
- Product Name:Delay Relay Module
- Product Number:XY-LJ02
- Working Voltage:DC 6V-30V or 5V Micro USB
- Control Current:10A(Max)
- Quiescent Current:15mA
- Working Current:50mA
- Working temperature: -40~85℃
- Suitable for the battery: Storage Battery, Lithium battery
- Trigger signal source: High-level trigger (3.0V~24V), Low-level trigger (0.0V~0.2V), switching control (passive switch)
- Reverse protection: Yes
- Physical dimension:80*38*2.1mm
8 Channel 12V Relay Module USB (PC Intelligent) Control Switch
SKU: AI1478 ₹729.24 (₹618.00 + GST)- Square onboard USB interface for connection stability
- The use of imported high-performance USB controller chip
- Use the special relay driver chip ULN2803, relay work more stable
- Military grade PCB board production
- Input voltage: DC 12 V
- Input Current: more than 300mA
- Connection : NC / COM / NO
5V 2 Channel SSR G3MB-202P Solid State Relay Module 240V 2A Output with Resistive Fuse
SKU: AI0841 ₹169.92 (₹144.00 + GST)
2 channel 2 AMP Solid State Relay board
Control 2 loads of up to 2 amps each at 120V or 240V AC.
Good for lighting, holiday displays etc.
Input control signal voltage:
0-0.5V the state of low-level relay ON
0.5-3.3V Unknown State
3.3-5V high-level relay OFF
Operating Voltage: 5V
Operating Current: 16mA
Maximum Load: 2A @ 240VAC
5V 1 Channel Without Light Coupling Relay
SKU: AI5246 ₹69.62 (₹59.00 + GST)- The 8550 transistor drive, driveability.
- A fixed bolt holes for easy installation.
- It has a relay status indicator led Power LED(Green), 8 relay status indicator LED(Red)
- Relay control interface by single-chip IO.
- Low-level suction close, high-level release.
- Easy to use, simple 3 line structure.
4 Channel Relay Module, 30A with Optocoupler, Isolation 5V Supports, High and Low Triger
SKU: AI3144 ₹650.18 (₹551.00 + GST)- Supply Voltage: DC 5V
- Quiescent Current: 5mA
- Maximum Operating Current: 190mA
- Trigger Mode: high and low-level trigger
- Load Voltage: DC 30V / AC250
- Load Current: 30A
- Relay Life: more than 100,000 times
- Trigger Voltage Range: Low-level trigger: 0-2V relay ON; 3-5V relay OFF; High-level trigger: 3.3-5V relay ON; 0-2.5V relay OFF
ESP8266 ESP-01 5V 4-Channels WiFi Relay Module for Home Remote Control Switch
SKU: AI3147 ₹699.74 (₹593.00 + GST)QUICK OVERVIEW:
- Product: ESP8266 ESP-01 5V 4-Channels WiFi Relay Module for Home Remote Control Switch
- Working Voltage: DC 5V
- Load Voltage: DC 30V 10A /AC 250V 10A
- Work Temperature: -40℃~85℃
- Work Humidity: 0%~95%RH
8 Road/Channel Relay Module (with light coupling) 24V
SKU: AI2405 ₹377.60 (₹320.00 + GST)QUICK OVERVIEW:
- Operating Voltage: 24V DC
- Equipped with high-current relay [email protected] / [email protected]
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- LED Status indicators to indicate the relay ON/OFF status
- Mounting holes provided
5V 1 Channel SSR G3MB-202P Solid State Relay Module 240V 2A Output with Resistive Fuse
SKU: AI0840 ₹127.44 (₹108.00 + GST)
Has been assembled, and electrical test passed.
Operating Voltage: 5V
Operating Current: 12.5mA
Maximum Load: 2A @ 240VAC
Input control signal voltage:
0-2.5V status low level, relay OFF
3-5V status high level, relay ON
433 24V 1 Channel Relay Module Wireless Remote Control Switch without Battery
SKU: AI1852 ₹420.08 (₹356.00 + GST)Overview
- Product: Wireless Remote Control Switch
- Operating voltage: DC 24V
- Operating temperature: -40~80 degrees
- Operating frequency: 433MHZ Receive sensitivity: ≥-95dB
- Working Mode: jump switch, point action, self-locking, and interlocking(adjustable)
- Switch size: approx. 40 x 40 x 25mm/1.57 x 1.57 x 0.98in
12V 4 Channel Relay Module
SKU: AI2965 ₹205.32 (₹174.00 + GST)QUICK OVERVIEW:
- 4-Channel Relay interface board and each one needs 15-20mA Driver Current.
- Both controlled by 12V and 5V input Voltage.
- Equipped with high-current relay, AC250V 10A ; DC30V 10A.
- Standard interface that can be controlled directly by microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic active low).
- Indication LED’s for Relay output status.
ESP8266 ESP-01 12V 2 Channels WiFi Relay Module Things Smart Home Remote Control Switch
SKU: AI3678 ₹494.42 (₹419.00 + GST)Quick Review:
- Transmission Distance(m) :400
- Relay Channel:2
- Trigger Voltage (VDC): 12
- Switching Voltage (VAC):250@10A
- Switching Voltage (VDC):30@10A
- Baud Rate:9600
4 Channel Relay Module, 30A with Optocoupler, Isolation 12V Supports, High and Low Triger
SKU: AI3145 ₹770.54 (₹653.00 + GST)- Supply Voltage: DC 12V
- Quiescent Current: 5mA
- Maximum Operating Current: 190mA
- Trigger Mode: high and low-level trigger
- Load Voltage: DC 30V / AC250
- Load Current: 30A
- Relay Life: more than 100,000 times
- Trigger Voltage Range: Low-level trigger: 0-2V relay ON; 3-5V relay OFF; High-level trigger: 3.3-5V relay ON; 0-2.5V relay OFF
12V 6 Channel with Light Coupling Relay Module
SKU: AI2397 ₹355.18 (₹301.00 + GST)Operating Voltage: 12V DC
Equipped with high-current relay [email protected] / [email protected]
It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
Freewheeling diode to protect your microcontroller
Input Signal Pin connected to Burg stick for easy accessibility
LED Status indicators to indicate the relay ON/OFF status
Mounting holes provided
12V Modbus RTU 4, Channels Relay Module, Input Optocoupler, Isolation RS485 MCU for, Arduino
SKU: AI3324 ₹503.86 (₹427.00 + GST)Product Name:4 Bit ModbusRTU Relay Module
Working Voltage:DC 12V
Working Current:1A
Work Temperature:-25℃~85℃
Work Humidity:5%~95%RH
Size:78*78*20mm
USB Control 1 Channel Module 5V Relay Module
SKU: AI0548 ₹333.94 (₹283.00 + GST)
QUICK OVERVIEW
Add to Compare
- Contact type: NC / COM / NO
- Input current: ≥300mA
- Input voltage: DC 5V
- Support Win7, XP 32-bit systems
- Onboard square USB interface, stable connection.
- Use imported high-performance USB control chip.
- Application code: Green indicates that the relay is closed, the red disconnect
- Military grade PCB board production.
1 Channel Relay Module, 30A with Optocoupler, Isolation 24V Supports, High and Low Triger（with Guide Rail)
SKU: AI3142 ₹266.68 (₹226.00 + GST)- Channel: 1 channel
- Comes with GUIDE RAIL
- Relay Voltage: 24V
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
12V 1 Channel Relay Module
SKU: AI1456 ₹41.18 (₹34.90 + GST)
QUICK OVERVIEW
Add to Compare
- Brand new and high quality.
- 1-Channel Relay interface board,
- Equipped with high-current relay : 15A @ 125V AC or 10A @ 250V AC
- Standard interface that can be controlled directly by microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM)
Waveshare Industrial 6-Channel ESP32-S3 WiFi Relay Module
SKU: AI6709 ₹3,819.66 (₹3,237.00 + GST)Waveshare Industrial 6-Channel ESP32-S3 WiFi Relay Module:
Power Supply (V):7~36
Relay Channels:6
Contact Rating: ≤10A 250VAC/30VDC
433MHz 12V 1 Channel Relay Module Wireless Remote Control Switch
SKU: AI3895 ₹422.44 (₹358.00 + GST)QUICK OVERVIEW:
- Number of Channels -1 (One)
- Operating Voltage – 12V DC
- RF Frequency -433 MHz
- Receiver Sensitivity >90 dBm
12V 8 Channels Relay Module High and Low Triggering Optocoupler Isolation Relay Module PLC Signal Amplifier Board
SKU: AI3254 ₹1,504.50 (₹1,275.00 + GST)
Supply voltage: DC12V
Trigger mode: High and Low-Level Trigger
Load voltage: DC 30V / AC 250V
Load current: 10A
ESP8266 ESP-01 12V 4, Channels WiFi Relay, Module Things Smart, Home Remote Control, Switch
SKU: AI3148 ₹644.28 (₹546.00 + GST)- Transmission Distance(m) :400
- Relay Channel:4
- Trigger Voltage (VDC): 12
- Switching Voltage (VAC):250@10A
- Switching Voltage (VDC):30@10A
- Baud Rate:9600
Songle Single-channel 24V 30A Relay Module
SKU: AI3671 ₹192.34 (₹163.00 + GST)Operating voltage: 24V
Module size: 50mm x 33mm x 24mm (length * width * height)
4 fixed bolt holes, holes 3.1mm, spacing 44.5mm x 27.5mm
Quiescent current: 5mA
Maximum current: 190mA
Trigger current: 2-4mA
Songle Single-channel 12V 30A Relay Module
SKU: AI3670 ₹156.94 (₹133.00 + GST)Specifications:
Voltage version: 12V
The static current: 5mA
Working current: 190mA
Trigger current: 2-4mA
The module can be set high-level or low-level trigger by the jumper
The rated current of the interface is 16A
DC 24V 1 Channel Relay Module 433Mhz RF Wireless Remote Control(with Battery)
SKU: AI3892 ₹428.34 (₹363.00 + GST)QUICK OVERVIEW
- Operating Voltage (VDC): 5 ~ 12
- Maximum Voltage (V): 24
- Supply Current (A): 10
- Operating Temperature (°C): -40 to 90
- Operating Distance Range (Meter): 15 ~ 30
- Storage Condition (℃): -40 to 80
24V 8 Channels Relay, Module High and Low, Triggering Optocoupler, Isolation Relay Module, PLC Signal Amplifier, Board
SKU: AI3255 ₹1,417.18 (₹1,201.00 + GST)
QUICK OVERVIEW:
- Product Name:8 Channels Modbus Relay Module
- Working Voltage: DC 24V
- Working Current:1A
- Work Temperature:-25℃~85℃
- Work Humidity:5%~95%RH
2 Channel Relay Module, 30A with Optocoupler, Isolation 24V Supports, High and Low Triger
SKU: AI3143 ₹331.58 (₹281.00 + GST)- Supply Voltage: DC 24V
- Quiescent Current: 5mA
- Maximum Operating Current: 190mA
- Trigger Mode: High and low-level trigger
- Load Voltage: DC 30V / AC 250
- Load Current: 30A
- Relay Life: more than 100,000 times
ESP8266 ESP-01 5V 1 Channel WiFi Relay Module Things Smart Home Remote Control Switch
SKU: AI3675 ₹320.96 (₹272.00 + GST)- Diode effusion protection
- Short response time
- Onboard Relay:5V,10A/250V AC 10A/30V DC relay
- Transmission distance : 400m (max)
- Baud Rate: 9600
4 Channel 3-24V Relay Module Solid State Low Level SSR DC Control DC with Resistive Fuse
SKU: AI3682 ₹562.86 (₹477.00 + GST)Part Number: H3MB-052DP
Power supply:3-24VDC/160mA
Switching Voltage (VAC):50@2A
Isolation: Phototriac
ESP8266 ESP-01 5V 2 Channels WiFi Relay Module Things Smart Home Remote Control Switch
SKU: AI3677 ₹436.60 (₹370.00 + GST)
QUICK OVERVIEW
- Product Name: ESP8266 ESP-01 5V 2 Channels WiFi Relay Module
- Transmission Distance(m) :400
- Relay Channel:2
- Trigger Voltage (VDC): 5
- Switching Voltage (VAC):250@10A
- Switching Voltage (VDC):30@10A
- Baud Rate:9600
1 Channel Relay Module, 30A with Optocoupler, Isolation 5V Supports, High and Low Triger, （with Guide Rail）
SKU: AI3141 ₹302.08 (₹256.00 + GST)QUICK OVERVIEW:
- 1 Channel Relay Module, 30A with Optocoupler
- Channel: 1 channel
- Comes with GUIDE RAIL
- Relay Voltage: 5V
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
5V 2 channel USB PC Intelligent Control Relay Module
SKU: AI0842 ₹404.74 (₹343.00 + GST)
Contact type: NC / COM / NO
Input current: ≥300mA
Input voltage: DC 5V
Support Win7, XP 32-bit systems
Onboard square USB interface, stable connection.
Use imported high-performance USB control chip.
Application code: Green indicates that the relay is closed, the red disconnect
Military grade PCB board production.
Add to Compare
Songle Single-Channel 12V 30A Relay Module Power Failure Relay High Level
SKU: AI3673 ₹220.66 (₹187.00 + GST)This 1 Channel 12V Relay Module is capable of actuating 240VAC/30A circuits safely – Eliminating dangers of high current circuits for users.
Operating Voltage – 12VDC Max Current Control – 30A Max Voltage Control (AC) – 240V Max Voltage Control (DC) – 30V
Output Modes – Normally Open / Normally Closed Dimensions – 40 x 34 x 22mm Weight – 35g
Despite being able to actuate high current and high voltage circuits, the relay itself operates on up to 12VDC, which is safe for users if a fault occurs.
Without a relay, if the high current circuit were to leak directly into a user, it could cause serious harm to a user and damage to the components.
Songle Single-Channel 5V 30A Relay Module
SKU: AI3672 ₹159.30 (₹135.00 + GST)- Trigger Voltage: 5VDC
- Switching Voltage: 250VAC@30A; 30VDC@30A
- The module can be set high level or low-level trigger by the jumper
DC5-80V ESP8266 Wireless WIFI Relay Module 1 Channel ESP8266 MOD Wifi Development Board Power Supply for Arduino
SKU: AI3763
1 Channel relay
ESP8266 MOD inbuild
Power Supply:5-80 V
Switching Voltage (VAC):250@10A
Switching Voltage (VDC):30@10A
Add to Compare
4 Channel 3-24V Relay Module Solid State High Level SSR DC Control DC with Resistive Fuse
SKU: AI3162 ₹646.64 (₹548.00 + GST)- Part Number: H3MB-052D
- Power supply: 3-24VDC/160mA
- Trigger Voltage (VDC): 3-24 VDC
- Switching Voltage (VDC): 50@2A
- Isolation: Phototriac
Remote Control Switch of 433MHz 5V 1 Channel Relay Module
SKU: AI0715 ₹420.08 (₹356.00 + GST)
QUICK OVERVIEW
Add to Compare
- Operating voltage: DC 5V
- Operating temperature: -40~80 degrees
- Operating frequency: 433MHZ Receive sensitivity: ≥-95dB
- Working Mode: jump switch, point action, self-locking, and interlocking(adjustable)
Waveshare Modbus RTU 32-Ch Relay Module, RS485 Interface, With Multiple Isolation Protection Circuits
SKU: AI7504 ₹6,473.48 (₹5,486.00 + GST)Quick Overview:
- Operating Voltage: 7 to 36V
- Communication Interface: RS485
- Relay Channels: 32
- Contact Rating: 30VDC
DC5V/8-80V ESP8266 Wireless WIFI Relay Module 2 Channel ESP-12F Wifi Development Board Power Supply for Arduino
SKU: AI3764 ₹561.68 (₹476.00 + GST)2 Channel relay
ESP8266 12F WiFi module Inbuild
Power Supply:5-80 V
Switching Voltage (VAC):250@10A
Switching Voltage (VDC):30@10A
2 Channel 24V Relay Module Solid State High Level SSR DC Control 250V 2A with Resistive Fuse
SKU: AI3681 ₹266.68 (₹226.00 + GST)
QUICK OVERVIEW
Add to Compare
- Power supply:24VDC/160mA
- Trigger Voltage (VDC):24
- Switching Voltage (VAC):50\60@2A
- Isolation: Phototriac
AC90-250V ESP8266, Wireless WIFI Relay, Module 4 Channel ESP-12F ,Wifi Development, Board AC/DC 5V/7-28V/5-80V Power Supply
SKU: AI3250 ₹934.56 (₹792.00 + GST)QUICK OVERVIEW: AC90-250V ESP8266, Wireless WIFI Relay, Module 4 Channel ESP-, 12F Wifi Development, Board AC/DC 5V/7-28V/5-, 80V Power Supply
- Power Supply:8-80 V
- Switching Voltage (VAC):250@10A
- Switching Voltage (VDC):30@10A
2 Channel 3-24V Relay Module Solid State High Level SSR DC Control DC with Resistive Fuse
SKU: AI3159 ₹421.26 (₹357.00 + GST)- Part Number: H3MB-052DP
- Power supply: 3-24VDC/160mA
- Switching Voltage (VAC): 50@2A
- Isolation: Phototriac
12V 1 Channel Bluetooth, Relay Module Things, Smart Home Remote, Control Switch
SKU: AI3150 ₹464.92 (₹394.00 + GST)- Easy to set up and pair with Android Phone
- Onboard Bluetooth status indicator and relay indicator
- With 4 optocoupler isolation, strong anti-interference ability
- Onboard N76E003/STM8S003 and SPP-C Bluetooth 2.1 module
- Effective control distance(on open area): 10m
- Module Operating Voltage: 12VDC
3V 4 Channel Low Level Relay Module Without Light Coupling
SKU: AI4161 ₹248.98 (₹211.00 + GST)
Specification:
Maximum load: AC 250V / 10A, DC 30V / 10A
Trigger current: 3mA
Working voltage: 3V
DC +: positive power supply (VCC)
DC-: negative power supply (GND)
IN: can be a high or low level control relay
NO: normally open relay interface
COM: Common Interface Relay
NC: normally closed relay interface
Add to Compare
1 Channel 12V Relay Module Solid State High Level SSR DC Control 250V 2A with Resistive
SKU: AI3155 ₹123.90 (₹105.00 + GST)- Part Number: G3MB-052D
- Power supply: 3-24VDC/160mA
- Trigger Voltage (VDC): 3-24 VDC
- Switching Voltage (VDC): 5060@2A
- Isolation: Phototriac
DC 12V Bluetooth 2 Channels Relay Module Internet Smart Remote Control Mobile Phone Switch Wireless Relay Module
SKU: AI3151 ₹594.72 (₹504.00 + GST)- Easy to set up and pair with Android Phone
- Onboard Bluetooth status indicator and relay indicator
- With 4 optocoupler isolation, strong anti-interference ability
- Onboard N76E003/STM8S003 and SPP-C Bluetooth 2.1 module
- Effective control distance(on open area): 10m
- Module Operating Voltage: 12VDC
5V 2A 8-Channel SSR G3MB-202P Solid State Relay Module (Low level Trigger)
SKU: AI2406 ₹647.82 (₹549.00 + GST)8 channel 2 AMP Solid State Relay board
Control 8 loads of up to 2 amps each at 120V or 240V AC.
Good for lighting, holiday displays etc.
Has been assembled, and the electrical test passed.
Operating Voltage: 5V
Operating Current: 16mA
Maximum Load: 2A @ 240VAC
5V Modbus RTU 4 Channels Relay Module, Input Optocoupler, Isolation RS485 MCU for, Arduino
SKU: AI3323 ₹590.00 (₹500.00 + GST)
QUICK OVERVIEW:
- Product Name:4 Bit ModbusRTU Relay Module
- Working Voltage:DC 5V
- Working Current:1A
- Work Temperature:-25℃~85℃
- Work Humidity:5%~95%RH
- Size:78*78*20mm
12V Modbus RTU 1Channel Relay Module, Input Optocoupler Isolation RS485 MCU for Arduino
SKU: AI3320 ₹335.12 (₹284.00 + GST)
QUICK OVERVIEW:
- Product Name: 1-Bit ModbusRTU Relay Module Working Voltage: DC 12V Working Current: 1A Operating Temperature: -25℃ to 85℃ Operating Humidity: 5% to 95% RH Size: 84 x 27 x 20 mm
2 Channel Relay Module 30A with Optocoupler Isolation 24V.
SKU: AI4135 ₹644.28 (₹546.00 + GST)Specification:
Supply Voltage: DC 24V Maximum Operating Current: 190mA Trigger Mode: High and low-level trigger Load Voltage: DC 30V / AC250 Load Current: 30A Relay Life: more than 100,000 times
7-24V Modbus RTU 1, Channel Relay Module, RS485/TTL Anti-reverse, Connection
SKU: AI3326 ₹446.04 (₹378.00 + GST)QUICK OVERVIEW:
- 1VCC, GND: DC7-24V power input
- GND: DC3.3-30V optocoupler signal input
- A +, B-: RS485 communication interface, A +, B- are connected to A +, B-
- Relay switch signal output
- NC: normally closed end, the relay is short-circuited to COM before pull-in, and left floating after pull-in;
- COM: public end;
- NO: Normally open, the relay is suspended before the pull-in, and shorted to COM after the pull-in.
- Relay indicator: lit when the relay is on
- GND, RXD, TXD: TTL level UART communication interface, GND, RXD, TXD are respectively connected to GND, TXD, RXD of the external control terminal
5V Modbus RTU, 1Channel Relay Module, Input Optocoupler, Isolation RS485 MCU for, Arduino
SKU: AI4301 ₹442.50 (₹375.00 + GST)- Product Name:1 Bit Modbus RTU Relay Module
- Working Voltage: DC 5V
- Working Current:1A
- Work Temperature:-25℃~85℃
- Work Humidity:5%~95%RH
5V Modbus RTU 2, Channels Relay Module, Input Optocoupler, Isolation RS485 MCU
SKU: AI4298 ₹522.74 (₹443.00 + GST)- Product Name: 5V Modbus RTU 2 Channels Relay Module
- Working Voltage: DC 5V
- Working Current:1A
- Work Temperature:-25℃~85℃
- Work Humidity:5%~95%RH
Thermal Sensor Relay Module
SKU: AI1129 ₹324.50 (₹275.00 + GST)
Supply voltage: 5VDC
Current: greater than 150mA
Switching Voltage: 250VAC@10A; 30VDC@10A
Add to Compare
HONGFA 12V 10A DC HF33F/012-HL3 5-Pin SPDT Miniature Power Relay
SKU: AI1006 ₹51.92 (₹44.00 + GST)
Provide 5A 250VAC to meet 300000 switching capability specifications
Creepage distance: 8mm (coil & contacts)
Clearance distance: NO type 4.5mm, NC type 4mm
Creepage distance >8mm
Subminiature, standard PCB layout
Plastic sealed and flux proofed types available
UL insulation system: Class F available
Product in accordance to IEC 60335-1 available.
Add to Compare
Free Shipping
On orders above ₹999
COD Available
Min. order ₹250 for COD
GST Invoice
Available on all orders
1,50,000+ Orders
Delivered across India
Expert Support
Toll Free: 1800 209 0998
Product categories
- Show All Categories
- 3D Printers and Parts (379)
- Batteries, Chargers and Accessories (811)
- Clearance Sale (0)
- Development Boards (438)
- DIY Learning and Robot Kits (117)
- Drone Parts (1364)
- EBike parts (140)
- Electronic Components (783)
- Electronic Modules and Displays (1201)
- FPV Freestyle Mid/High KV Drone Motors (0)
- IoT and Wireless (544)
- Mechanical Parts and Workbench Tools (241)
- Motors & Drivers & Pumps & Actuators (583)
- Sensor Modules (639)
- Audio Amplifier Module (51)
- Breakout Board (40)
- Buck Boost Voltage Regulators (158)
- Electronic Switches/Keypads Modules (49)
- LASER Module (12)
- LED Module (13)
- Logic Level Converter (6)
- Piezo Buzzer Module (7)
- Potentiometer Module (3)
- Relay Modules (175)
- RGB LED Strips and Drivers (36)
- RTC Module (16)
- Solar Panels and Controllers (8)
- USB Interface Module (160)
- Wearable Electronic (21)
- Electronic Modules (755)