Voltage: 3.3V or 5V.
Port: Analog.
Resistance: 10K.
Dimensions: 91 x 21 x 30 mm(LxWxH)
Weight: 18 gm.
QUICK OVERVIEW
Model: 18650 radiating battery spacer.
Material: ABS/PC (Remarkable Flame Retardant Plastic).
Bore Diameter: 18.5mm
Combined them into many different sizes and shapes of the battery pack.
Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
Operating Voltage: 3.7 – 5VDC
SNR: 90dB
Support Profile: A2DP / AVCTP / AVDTP / AVRCP / HFP
Operating Voltage(V): 5 ~30
Current Consumption Max: 5 mA
Detection distance(mm): 5 mm.
Type of detection: Inductive.
Cable Length: 100cm.
Response Frequency: 500Hz Max.
Protection class: IP 67.
Operating voltage:( 5V DC).
Detector distance: (1CM).
Adjust the potentiometer, let the modules work normally.
Small and easy to use module.
It comes with a Buzzer for metal detection indication.
Dimension: 9 x 15 CM
Base Material FR4
Copper Thickness 1-4 OZ
Board Thickness 1.6
Min. Hole Size 0.3mm
Min. Line Width 6mil
Min. Line Spacing 6mil
Surface Finishing HASL
Length: 10
Pitch: 4.5
Weight: 14 gm.
Shaft Diameter: 6 mm.
Total length: 10 inch / 254 mm.
Brand new and high quality
Included USB transceiver, without external circuit device
With 3.3V and 5V dual power output
With three LEDs: power indicator, data reception indicator, the data transmission indicator, working status
Meets the USB2.0 specification requirements
With self-recovery fuse. In the event of the accidental short circuit, it can effectively protect your computer USB port and Downloader
Asynchronous serial data bus compatible with all handshake and modulation controller interface signals
The supported data format is 8 data bits, 1 stop bit and parity bits
Charging voltage: 25.5V
Charging current: 20A (MAX)
Overcharge detection voltage: 4.28 ± 0.05V
Overcharge protection delay: 0.1S
Overcharge release voltage: 4.08 ± 0.05V
Over discharge detection voltage: 2.55 ± 0.08V
Overdischarge detection delay: 0.1S
The overdischarge release voltage: 2.9 ± 0.1V
QUICK OVERVIEW:
Power Supply: 3.3~5.5V DC
Output: 4-pin single row
Measurement Range: Humidity 20-90%RH, Temperature 0~50℃
Accuracy: Humidity ±5%RH, Temperature ±2℃
Resolution: Humidity 1%RH, Temperature 1℃
Interchangeability: Fully Interchangeable
Long-Term Stability: <±1%RH/year
Size: 12 MM
Operation: Self Locking
LED Light : Blue
Water Resistance : Waterproof
QUICK OVERVIEW:
Operating Voltage: AC 220V
Maximum Power: 5000W
Voltage range (adjust temperature or light): 0-220V AC
High-temperature FR-4 PCB
100% High quality and Brand new
Measuring range: temperature -40-80 ℃; humidity 0; 99.9%RH
Measurement accuracy (25℃): temperature: + 0.5; humidity: + 2%RH (10; 90%RH)
Resolution: temperature: 0.1 ℃, humidity: 0.1%RH
Attenuation value: temperature: <1℃ / year; humidity: < 1%RH/ years
High precision
Capacitive type
Model: HXYP-4S-BMD1
Small size designed for a four-cell battery pack.
Simple wiring and circuit
Over-charge Protection
Continuous Current: 10A
Max Pick Current: 20A
Overview
Good electrical conductivity
This is Momentary type push-button switch
Easy to use
Light Weight
Function: Momentary
Operating Voltage: 3.5V to 5.5V
Operating current: 0.3mA (measuring) 60uA (standby)
Output: Serial data
Temperature Range: -40°C to 80°C
Humidity Range: 0% to 100%
Resolution: Temperature and Humidity both are 16-bit
Accuracy: ±0.5°C and ±1%
XH-A 2.5mm 3 pin Wafer Male Connector DIP Straight:
QUICK OVERVIEW:
Cable Assembly Barrel Jack – 2.1mm ID, 5.5mm OD to USB A Male Plug 3.28′ (1.00m)
170 Tie-points for Arduino, Raspberry Pi
Colour May Vary
Great addition to your hobby craft tool kit
Perfect product for your safety and lab supply
ABS Plastic material
QUICK OVERVIEW:
Input Voltage: DC 5V
Output: DC 4.2V 1000mA (Max)
Support 18650 battery
Intelligent anti-reverse protection
Automatically stop charging when fully charged
Independent working on each slot with LED indicator
On orders above ₹999
Min. order ₹250 for COD
Available on all orders
Delivered across India
Toll Free: 1800 209 0998