Arduino MKR WAN 1300 (LORA Connectivity)
SKU: AI1987 ₹3,905.80 (₹3,310.00 + GST)
Overview
Add to Compare
- Microcontroller: SAMD21 Cortex-M0+ 32bit low power ARM MCU
- Clock Speed: 32.768 kHz (RTC), 48 MHz
- Characteristic Crypto Chip: ECC508
- The Murata CMWX1ZZABZ LoRa module
- Carrier Frequency: 433/868/915 MHz
- Operating Voltage: 3.3v
Arduino MKR Vidor 4000
SKU: AI1986 ₹5,842.18 (₹4,951.00 + GST)
Overview
Add to Compare
- FPGA: Intel® Cyclone® 10CL016
- PCI: Mini PCI Express port with programmable pins
- Camera Connector: MIPI camera connector
- Microcontroller: SAMD21 Cortex®-M0+ 32bit low power ARM MCU
- Radio module: u-Blox NINA-W102 (datasheet)
- Board Power Supply :(USB/VIN) 5V
- All pins are PWM pins
- MIPI camera connector
- Mini PCI Express port with programmable pins
- Full-Speed USB Device and embedded Host
Arduino MKR Therm Shield
SKU: AI1985 ₹4,428.54 (₹3,753.00 + GST)
The MKR Therm Shield is a great addon for MKR family boards, and allows you to connect high-quality thermocouples, and can calculate temperatures from -200°C to +700°C. An ideal solution to use for ovens, freezers, smokers, and similar environments.
Arduino MKR Mem Shield
SKU: AI1984 ₹1,923.40 (₹1,630.00 + GST)
Are you developing a complex IoT device with your MKR board and running out of memory? Add Flash memory and microSD storage to your MKR board, and allow over-the-air updates, with the Arduino MKR MEM Shield.
Arduino MKR GPS Shield
SKU: AI1983 ₹3,294.56 (₹2,792.00 + GST)
The MKR GPS Shield is based on the u-blox SAM-M8Q GNSS (Global Navigation Satellite System) module. It can be used to add GPS to any of your MKR boards. To use this shield, you can refer to the documentation of the MKR GPS library.
Arduino MKR ENV Shield Rev2
SKU: AI1982 ₹3,393.68 (₹2,876.00 + GST)
Overview
These sensors are of the latest generation and measure:
Add to Compare
- Atmospheric pressure
- Temperature and humidity
- Light intensity (in LUX, max 650)
Arduino MKR Connector Carrier (Grove Compatible)
SKU: AI1981 ₹1,923.40 (₹1,630.00 + GST)
Want to connect several Seeed Studio Grove modules to your Arduino board? The Arduino MKR CONNECTOR CARRIER is the perfect companion for Arduino MKR boards and a Grove ecosystem.
Arduino MKR CAN Shield
SKU: AI1980 ₹3,167.12 (₹2,684.00 + GST)
The MKR CAN Shield is based on the MCP2515 CAN controller and the TJA1049 CAN transceiver. Mounting this shield on a MKR family board allows you to connect to existing CAN systems. It also features the TPS54232 buck converter from Texas Instruments.
Add to Compare
Arduino MKR 485 Shield
SKU: AI1979 ₹3,232.02 (₹2,739.00 + GST)
Overview
Add to Compare
- Input Voltage:7-24V
- Interface Serial
- Compatibility MKR size
- Transceiver MAXIM MAX3157
- Buck converter Texas Instruments TPS54232
- Switchable onboard termination resistor
Arduino Leonardo without Headers
SKU: AI1978 ₹1,499.78 (₹1,271.00 + GST)
ATmega32U4 Microcontroller
Input Voltage: 7-12V
20 Digital I/O Pins
micro USB connection
Add to Compare
Arduino Edge Control
SKU: AI1977 ₹24,299.74 (₹20,593.00 + GST)
Overview
Add to Compare
- Operating Supply Voltage: 12 V.
- Dimensions: 104 mm x 86 mm.
- Interface Type: I2S, Serial, USB.
- Maximum Operating Temperature: + 85 C.
- Minimum Operating Temperature: – 40 C.
Adafruit Feather 32u4 Bluefruit LE with Stacking Headers – Assembled
SKU: AI1800 ₹4,954.82 (₹4,199.00 + GST)
Overview
Add to Compare
- Model: Adafruit Feather 32u4 Bluefruit LE
- Light as a (large?) feather – 5.7 grams
- ATmega32u4 @ 8MHz with 3.3V logic/power
- 3.3V regulator with 500mA peak current output
Adafruit ESP32 Feather V2 – 8MB Flash + 2 MB PSRAM – STEMMA QT
SKU: AI1796 ₹3,009.00 (₹2,550.00 + GST)
Overview
Add to Compare
- 240 MHz dual core Tensilica LX6 microcontroller with 600 DMIPS
- Integrated 520 KB SRAM
- Integrated 802.11b/g/n HT40 Wi-Fi transceiver, baseband, stack and LWIP
- Integrated dual-mode Bluetooth (classic and BLE)
- On-board PCB antenna
- Ultra-low noise analog amplifier
Adafruit Trinket M0 – for use with CircuitPython & Arduino IDE
SKU: AI1795 ₹1,296.82 (₹1,099.00 + GST)
Overview
Add to Compare
- Same size, form factor, and pinout as a classic Trinket
- Updating ATtiny85 8-bit AVR for ATSAMD21E18 32-bit Cortex M0+
- 256KB Flash – 32x as much as 8 KB on ATtiny85
- 32 KB RAM – 64x as much as 512 bytes on ATtiny85
- 48 MHz 32-bit processor – 6x as fast as ATtiny85 (not even taking into account 32-bit speedups)
- Native USB supported by every OS
Adafruit INA 210 Feather Wing
SKU: AI1794 ₹902.70 (₹765.00 + GST)
Overview
Add to Compare
- INA219B chip
- 3.3Vvoltage regulation
- +26VDC peak current
Adafruit SPI Non-Volatile FRAM Breakout – 4 Mbit / 512 KBytes – MB85RS4MT RoHS Compliant
SKU: AI1792 ₹3,599.00 (₹3,050.00 + GST)
Overview
Add to Compare
- Brand: Adafruit
- Memory: 4 Mbit / 512 KBytes
- Operating Frequency: 40MHz Max
- operating Voltage: 3.3V
- Color: Black
Adafruit Feather 328P -Atmega328P 3.3V @ 8MHz
SKU: AI1785 ₹1,414.82 (₹1,199.00 + GST)
Overview
Add to Compare
- ATmega328p @ 8MHz with 3.3V logic/power
- 3.3V regulator with 500mA peak current output
- USB serial converter (CP2104)
- USB bootloader and serial port debugging
- Hardware I2C, hardware SPI support
Adafruit Feather M0 Express – Designed for CircuitPython -ATSAMD21 Cortex-M0
SKU: AI1784 ₹2,712.82 (₹2,299.00 + GST)
Overview
Add to Compare
- ATSAMD21G18 @ 48MHz with 3.3V logic/power
- 256KB of FLASH + 32KB of RAM
- 32.768 KHz crystal for clock generation & RTC
- 3.3V regulator with 500mA peak current output
- Comes with a USB bootloader and serial port debugging
Adafruit Assembled Data Logging shield for Arduino
SKU: AI1783 ₹2,181.82 (₹1,849.00 + GST)
Overview
Add to Compare
- Model: Adafruit Assembled Data Logging shield
- SD card interface: FAT16 or FAT32
- Onboard regulator: 3.3 V
- Real time clock (RTC) keeps the time going even when the Arduino is unplugged
Adafruit Feather M4 Express – Featuring ATSAMD51 – ATSAMD51 Cortex M4
SKU: AI1774 ₹3,007.82 (₹2,549.00 + GST)
Overview
Add to Compare
- ATSAMD51 32-bit Cortex M4 core
- 512 KB flash, 192 KB RAM
- 3.3V regulator with 500mA peak current regulator
- USB bootloader and serial port debugging
- Built-in 100mA lipoly charger with charging status indicator LED
Adafruit PRO Trinket – 5V 16MHz
SKU: AI1773 ₹831.90 (₹705.00 + GST)
Overview
Add to Compare
- Core Processor: AVR
- Type: Development
- Interconnect System: Trinket
- Mounting Type: Fixed
- Suggested Programming Environment: Arduino
- Type:MCU 8-Bit
- Utilized IC / Part:ATtiny85
Adafruit Feather M0 Bluefruit LE
SKU: AI1771 ₹3,892.82 (₹3,299.00 + GST)
Overview
Add to Compare
- ATSAMD21G18 @ 48MHz with 3.3V logic/power
- 256KB of FLASH + 32KB of RAM
- 3.3V regulator with 500mA peak current output
- USB bootloader and serial port debugging
- Built-in 100mA lipoly charger with charging status indicator LED
Adafruit Metro Mini 328 – Arduino-Compatible – 5V 16MHz
SKU: AI1769 ₹2,004.82 (₹1,699.00 + GST)
Overview
Add to Compare
- 5V logic with 3.3V compatible inputs can be converted to a 3.3V logic operation
- 32KB Flash Memory – 0.5K for bootloader
- Four indicator LEDs
- Easy reprogramming
- 31.5KB available after bootloading
- 16MHz Clock Speed
Adafruit Feather RP2040
SKU: AI1766 ₹1,591.82 (₹1,349.00 + GST)
Overview
Add to Compare
- RP2040 32-bit Cortex M0+ dual-core running at ~125 MHz
- 8 MB SPI FLASH
- Built-in 200mA+ lipo charger
- On-board STEMMA QT / Qwiic connector
- 3.3V regulator with 500mA peak current output
- USB Type C connector
- 264kB on-chip SRAM
- 21 x Multifunction GPIO
- 3.3V regulator with 500mA peak current output
Adafruit QT Py – SAMD21 Dev Board with STEMMA QT
SKU: AI1765 ₹1,119.82 (₹949.00 + GST)
Overview
Add to Compare
- Board Type:Evaluation Platform
- Contents:Board(s)
- Core Processor:ARM® Cortex®-M0
- Mounting Type:Fixed
- Platform:Arduino
- Type:MPU
- Utilized IC / Part:ATSAMD21E18
Adafruit Feather 32u4 Bluefruit LE MCU Development Board 2829
SKU: AI1764 ₹4,718.82 (₹3,999.00 + GST)
Overview
Add to Compare
- Kit Name: Feather 32u4 Bluefruit LE
- Technology: MCU
- Processor: ATmega32u4
- Compatible:3.7 lipo battery
Adafruit Feather M4 CAN Express with ATSAME51
SKU: AI1763 ₹3,774.82 (₹3,199.00 + GST)
Overview
Add to Compare
- ATSAME51 32-bit Cortex M4 core with 120 MH
- 32-bit, 3.3 V logic and power
- 512 KB Flash, 192 KB RAM
- 2 MB SPI FLASH chip
- 3.3V regulator with 500mA peak current output
- USB Type-C
Adafruit Feather M0 Adalogger
SKU: AI1762 ₹2,712.82 (₹2,299.00 + GST)
Overview
Add to Compare
- ATSAMD21G18 @ 48MHz with 3.3V logic/power
- 256KB of FLASH + 32KB of RAM
- 3.3V regulator with 500mA peak current output
- USB bootloader and serial port debugging
- Built-in 100mA lipoly charger with charging status indicator LED
Adafruit Feather nRF52840 Sense
SKU: AI1759 ₹5,898.82 (₹4,999.00 + GST)
Overview
Add to Compare
- ARM Cortex M4F (with HW floating point acceleration) running at 64MHz
- 1MB flash and 256KB SRAM
- Native Open Source USB stack – pre-programmed with UF2 bootloader
- Bluetooth Low Energy compatible 2.4GHz radio
- FCC / IC / TELEC certified module
SparkFun AST-CAN485 Dev Board
SKU: AI1603 ₹4,954.82 (₹4,199.00 + GST)- Uses the AT90CAN microcontroller
- 16MHz Clock
- 8 analog inputs
- 2 UARTs
- 16 Digital I/Os
- DC Input: 5–16V (150mA Current Max)
- RS485 Transceiver
MICROCHIP DM320115 Evaluation Board, Curiosity Nano, ATmega4809 MCU, MPLAB X IDE, On-Board Debugger
SKU: AI1602 ₹2,899.00 (₹2,456.78 + GST)- MICROCHIP DM320115 Evaluation Board, Curiosity Nano, ATmega4809 MCU, MPLAB X IDE, On-Board Debugger
- AVR® CPU
- Single-cycle I/O access
- Two-level interrupt controller
- Two-cycle hardware multiplier
MICROCHIP DM164151 Evaluation Kit, Curiosity Nano, AVR128D MCU, 8-Bit
SKU: AI1601 ₹2,749.00 (₹2,329.66 + GST)- MICROCHIP DM164151 Evaluation Kit, Curiosity Nano, AVR128D MCU, 8-Bit
- One yellow user LED, one mechanical user switch
- One 32.768KHz crystal
- Board identification in Atmel Studio/Microchip MPLAB® X IDE
- One green power and status LED
MICROCHIP ATXMEGAE5-XPLD Development Kit, ATxMega32E5 AVR MCU, OLED Display, Digital I/O, Ambient Light Sensor
SKU: AI1600 ₹5,249.00 (₹4,448.31 + GST)- MICROCHIP ATXMEGAE5-XPLD Development Kit, ATxMega32E5 AVR MCU, OLED Display, Digital I/O, Ambient Light Sensor
- : Atmel
- : 8bit
- : ATxmega
- : AVR
MICROCHIP ATTINY817-XPRO Evaluation Kit, ATtiny817 MCU, Embedded Debugger, Microchip Studio Support
SKU: AI1599 ₹5,549.00 (₹4,702.54 + GST)- MICROCHIP ATTINY817-XPRO Evaluation Kit, ATtiny817 MCU, Embedded Debugger, Microchip Studio Support
- Two mechanical user buttons
- Two QTouch® buttons
- One yellow user LED
- 32.768 kHz crystal
MICROCHIP ATMEGA1284P-XPLD Evaluation Kit, ATMEGA1284P MCU’s, Sensors, Mechanical Buttons, LED’s, UART to USB Bridge
SKU: AI1598 ₹118.00 (₹100.00 + GST)
MICROCHIP ATMEGA1284P-XPLD Evaluation Kit, ATMEGA1284P MCU’s, Sensors, Mechanical Buttons, LED’s, UART to USB Bridge
: Atmel
: 8bit
: ATmega
: AVR
Add to Compare
MICROCHIP DM320115 Evaluation Board, Curiosity Nano MPLAB X IDE, On-Board Debugger
SKU: AI1597 ₹3,449.00 (₹2,922.88 + GST)- MICROCHIP DM320115 Evaluation Board, Curiosity Nano MPLAB X IDE, On-Board Debugger
- Core Architecture: AVR
- Silicon Family Name: ATmega
- Silicon Manufacturer: Microchip
- No. of Bits: 8bit
MICROCHIP DM080104 AVR Embedded Daughter Board AND Modules
SKU: AI1596 ₹3,549.00 (₹3,007.63 + GST)- Product: MICROCHIP DM080104 AVR Embedded Daughter Board AND Modules
- Controlled by the same ATtiny1617 MCU
- 5×6 Surface diamond pattern with dedicated driven shield
- LEDs to indicate position and mode
- MCP23017 LED driver
MICROCHIP ATMEGA328PB-XMINI Evaluation Kit, Mini, ATmega328PB Xplained Mini, 8-Bit
SKU: AI1595 ₹1,899.00 (₹1,609.32 + GST)- Product: ATMEGA328PB-XMINI Evaluation Kit, Mini, ATmega328PB Xplained Mini, 8-Bit
- Architecture: megaAVR
- Silicone Manufacturer: Atmel
- Silicon Family Name: ATmega
- No. of Bits: 8bit
Teensy LC USB Micro-controller Development Board
SKU: AI1594 ₹1,532.82 (₹1,299.00 + GST)- 32 bit ARM Cortex-M0+ 48 MHz CPU
- 62kB Flash Memory, 8kB RAM, 1/8(emu)kB EEPROM
- 13 High-Resolution Analog Inputs
- 27 Digital I/O Pins (NOT 5V Tolerant)
- 10 PWM outputs
- 7 Timers for intervals/delays, separate from PWM
- 3 UARTs (serial ports)
- SPI, I2C, I2S
- I2S (for the high-quality audio interface)
Teensy 4.1 Development Board
SKU: AI1593 ₹3,538.82 (₹2,999.00 + GST)- ARM Cortex-M7 at 600MHz
- 1024K RAM (512K is tightly coupled)
- 8 Mbyte Flash (64K reserved for recovery & EEPROM emulation)
- USB Host Port
- 2 chips Plus Program Memory
- 55 Total I/O Pins
Teensy 4.0 Development Board
SKU: AI1592 ₹2,926.40 (₹2,480.00 + GST)- ARM Cortex-M7 at 600 MHz
- 1024K RAM (512K is tightly coupled)
- 2048K Flash (64K reserved for recovery & EEPROM emulation)
- 2 USB ports, both 480 MBit/sec
Teensy 3.6 Development Board
SKU: AI1591 ₹3,066.82 (₹2,599.00 + GST)Quick overview:
- Product name:Teensy 3.6 Development Board
- 180 MHz ARM Cortex-M4 with Floating Point Unit
- 1M Flash, 256K RAM, 4K EEPROM
- Microcontroller Chip MK66FX1M0VMD18
- USB High Speed (480Mbit/sec) Port
- 2 CAN Bus Ports
- 32 General Purpose DMA Channels
- 22 PWM Outputs
- 4 I2C Ports
- 11 Touch-Sensing Inputs
- 62 I/O Pins (42 breadboards friendly)
Teensy 3.5 Development Board
SKU: AI1590 ₹3,538.82 (₹2,999.00 + GST)- 120MHz ARM Cortex-M4 with Floating Point Unit
- 512K Flash, 192K RAM, 4K EEPROM
- Microcontroller Chip MK64FX512VMD12
- 1 CAN Bus Port
- 16 General Purpose DMA Channels
- 5V Tolerance on All Digital I/O Pins
- 62 I/O Pins (42 breadboards friendly)
- 25 Analog Inputs to 2 ADC with 13-bit resolution
- 2 Analog Outputs (DAC) with 12-bit resolution
- 20 PWM Outputs (Teensy 3.6 has 22 PWM)
- USB Full Speed (12Mbit/sec) Port
- Ethernet mac, capable of full 100Mbit/sec speed
- Native (4-bit SDIO) micro SD card port
Teensy 3.2 Development Board
SKU: AI1589 ₹2,063.82 (₹1,749.00 + GST)- 32 bit ARM Cortex-M4 72 MHz CPU (M4 = DSP extensions)
- 256K Flash Memory, 64K RAM, 2K EEPROM
- 21 High-Resolution Analog Inputs (13 bits usable, 16-bit hardware)
- 1x 12 bit DAC Analog output
- 34 Digital I/O Pins (16 shared with analog)
- 12 PWM outputs
- 7 Timers for intervals/delays, separate from PWM
- USB with dedicated DMA memory transfers
- 3 UARTs (serial ports)
- SPI, 2x I2C, I2S, IR modulator
- I2S (for the high-quality audio interface)
- CAN Bus
- Real Time Clock (with user-added 32.768 crystal and battery)
PT8211 Unassembled Audio Kit for Teensy 3.x
SKU: AI1588 ₹277.30 (₹235.00 + GST)- CMOS technology
- Support 3.3V bus input level
- Low power consumption
- Two audio channel output in the same chip
- 16 bit dynamic range
- Low total harmonic distortion
PJRC Prop Shield with Motion Sensor for Teensy 3.2 and Teensy-LC Development Board
SKU: AI1587 ₹1,768.82 (₹1,499.00 + GST)- Motion Sensors – Allow motion interactive light and sound
- Audio Amplifier – Clear quality audio output to a small speaker
- Fast LED Driver – Drive APA102 / Dotstar LEDs for colourful lighting with rapid response
- Flash Memory – 8MB storage for images, sound clips and data logging
SparkFun MicroMod Teensy Processor
SKU: AI1586 ₹2,948.82 (₹2,499.00 + GST)- USB Device up to 480Mbit/sec
- Capable of enumerating as a USB keyboard, mouse, joystick, MIDI, audio.
- Support 24-bit, 16-bit, and 8-bit CSI input
- It contains a Temperature sensor with programmable trim points
Metal Protective Case for Nvidia Jetson Nano
SKU: AI1568 ₹1,371.00 (₹1,161.86 + GST)- Mini PC Chassis Design
- Compatible With Both Version Original and B01
- Special Camera Holder
- Comes With Reset and Power Button
- Precise Openings for GPIO’s, TF Card Slot, External Ports
3.2 Inch TFT LCD Touch Screen Display V4.0 for Raspberry Pi
SKU: AI1542 ₹2,122.82 (₹1,799.00 + GST)- Version: V4.0
- Resistive touch.
- Dimension: 3.2 inch.
- Operating Voltage: DC 5V.
- Driver: XPT2046.
- Resolution: 240 x 320.
40 Pin U-Shaped GPIO Expansion Board for Raspberry Pi 3 and Raspberry Pi B+
SKU: AI1514 ₹199.42 (₹169.00 + GST)- This is for Raspberry Pi 3 Raspberry Pi B +
- Input Voltage(V): 3 or 5
- Ideal for breadboard experiments
Voltage Divider Module for boards compatible with Arduino
SKU: AI1125 ₹76.70 (₹65.00 + GST)
Extern Voltage Interface and Grove Interface
Easy to use
Can adjust the gain.
Add to Compare
Wemos TTGO Xi 8F328P-U Board For Arduino Nano V3.0 Promini
SKU: AI1116 ₹507.40 (₹430.00 + GST)
It comes with USB and is more convenient to use.
The 8F328D can be powered by 3V3 and 5V, operating at 16M frequencies with excellent levels of compatibility.
Built-in high precision RC, without external crystal oscillator, can be stable operation.
Less peripheral parts, simple circuit design.
Add to Compare
Nano USB Cable (USB-A to Mini-USB) Blue – 1 m
SKU: AI0925 ₹55.46 (₹47.00 + GST)
Up to 480 Mbps data transfer rate.
USB Type: Type-A to Mini-B
Length: 1 Meter
Exclusively designed for Arduino boards.
Add to Compare
HAT DIY PCB Prototyping Board for Raspberry PI ZERO
SKU: AI0897 ₹279.00 (₹236.44 + GST)
164 holes of prototyping area
4 rows of 6 connected holes for power rails and other purposes
Silkscreen marking for 40-pin Pi Header reference
High-quality HASL PCB finishing
D0.9mm drill holes and D1.9mm pad size
Add to Compare
PIMORONI MMC (micro SD) HAT for Raspberry Pi
SKU: AI0896 ₹1,345.20 (₹1,140.00 + GST)
High-Quality Construction
Expands Raspberry Pi’s Onboard SD-Card Socket
Supports MicroSD-Card
Compatible With Raspberry Pi A+, B+, Zero & Zero W1 (with headers), 2B, 3B1 & 3B+, 4B
Add to Compare
PIMORONI Nano HAT Hacker for Raspberry Pi
SKU: AI0893 ₹295.00 (₹250.00 + GST)
Compatible With Raspberry Pi 40 Pin GPIO Header
BCM Pinout
0.8mm PCB Thickness
Can Fit Another HAT on Top
Add to Compare
Waveshare USB 3.2 Gen1 And Gigabit Ethernet HUB HAT for Raspberry Pi, 3x USB, 1x Gigabit ETH, Driver-Free
SKU: AI0890 ₹2,454.40 (₹2,080.00 + GST)
Driver-free, plug and play, compatible with OS including Windows, Mac OS, Linux, and Android
Purpose-made for Raspberry Pi 4, compatible with other Raspberry Pi versions as well
Comes with development resources and manual
Add to Compare
Waveshare Raspberry Pi Zero 2W To CM3 Adapter, Alternative Solution for Raspberry Pi CM3 / CM3+
SKU: AI0899 ₹1,439.60 (₹1,220.00 + GST)
Brand: Waveshare
Product: Raspberry Pi Zero 2W To CM3 Adapter
Adapting GPIO via female pin header
Not compatible with the first generation Zero
Add to Compare
Micro:bit T-type GPIO Board
SKU: AI0989 ₹269.00 (₹227.97 + GST)
Expansion Board Type: T-type GPIO Board
GPIO Pins: 21 GPIO Pins
Dimensions: 7 x 1.5 x 6.5cms
Connection type: 0.1-inch space headers
Mounting Holes: M3
Add to Compare
ENC28J60 Ethernet Shield for Arduino Nano 3.0 RJ45 Webserver Module
SKU: AI0997 ₹790.60 (₹670.00 + GST)
Microchip's ENC28J60 ethernet / HR911105A
Direct plug puzzle board
No soldering needed.
Add to Compare
PI ZERO/ZERO W ENC28J60 Internet Module Supporting all RPI Board
SKU: AI0892 ₹1,899.80 (₹1,610.00 + GST)
ENC28J60 Ethernet Module
HanRun HR911105A Ethernet port
3.3V supply voltage
100% Genuine ENC28J60 Chipset, compatible with raspberry pi zero.
25MHz Crystal.
Standard HanRun HR911105A Ethernet Interface.
Add to Compare
Core407I – STM32F407IGT6 Development Board
SKU: AI0901 ₹4,071.00 (₹3,450.00 + GST)
Core: Cortex-M4 32-bit RISC
Feature: a full set of single-cycle DSP instructions
Operating Frequency: 168MHz, 210 DMIPS/1.25 DMIPS/MHz
Operating Voltage: 1.8V-3.6V
Package: LQFP176
Memories: 1024kB Flash, 192+4kB SRAM
Add to Compare
Pi Zero H2 256/512MB Quad Core Open Source Development Board Replace Raspberry Pi
SKU: AI0818 ₹2,819.02 (₹2,389.00 + GST)
Material: PCB
Color: Blue
Type: 1, 2
Size(L*W): About 46x28cmm
CPU : H2 Quad-core Cortex-A7 H.265/HEVC 1080P
GPU: Mali400MP2 GPU 600MHz, Supports OpenGL ES 2.0
Memory (SDRAM): 256MB/512MB
Onboard Storage: TF card (Max. 64GB) / 2MB SPI Flash
Onboard Internet: 100M / 10M Ethernet RJ45 (POE is default off)
Wifi Antenne: XR819, IEEE 802.11 b/g/n
USB 2.0 Ports: One USB 2.0 HOST, one USB 2.0 OTG
Add to Compare
Waveshare Industrial IoT Wireless Expansion Module Designed for Raspberry Pi Compute Module 4 (4G Module Included)
SKU: AI0824 ₹10,651.86 (₹9,027.00 + GST)
CM4 SOCKET: suitable for all variants of Compute Module 4
NETWORKING: Gigabit Ethernet RJ45
M.2 B KEY / Mini-PCIe (via adapter), for connecting 5G / 4G / LoRa wireless module
Nano-SIM card slot, supports standard Nano-SIM card for 5G/4G/3G/2G communication
USB USB: 2.0 × 3
Add to Compare
Micro: bit GPIO BreadBoard Expansion Board
SKU: AI1019 ₹458.00 (₹388.14 + GST)
Expansion Board Type: Breadboard type GPIO Board
GPIO Pins: 22 GPIO Pins
Connection type: 0.1-inch space headers
Mounting Holes: M3
Add to Compare
BBC Micro : Bit V2 Go Kit
SKU: AI1018 ₹2,011.90 (₹1,705.00 + GST)
32-bit ARM Cortex-M4 CPU
Main microcontroller: Nordic Semiconductor nRF52833
Clock Speed: 64MHz
Memory size: 512KB Flash
RAM size: 128KB RAM
USB Interface: NXP KL27Z with 32KB RAM
Touch Sensitive micro:bit logo
Built-in MEMS microphone input
Add to Compare
SanDisk Micro SD/SDHC 16GB Class 10 Memory Card (Up to 98MB/s Speed)
SKU: AI1022 ₹389.40 (₹330.00 + GST)
Memory Size: 16 Gigabyte
Card Type: Micro SD
Speed: up to 98MB/s
Class: 10
High-speed Card can be used for both Mobile phone and Raspberry Pi
5 years of manufacturing defect Warranty Given by Sandisk.
Add to Compare
STM8S003F3P6 System Board STM8S003F3 STM8S STM8 Development Board
SKU: AI0615 ₹205.32 (₹174.00 + GST)
3.3v to 5v supply
High Quality PCB
Power Source: DC
RoHS Compliant
Material: Copper
Add to Compare
Raspberry Pi Pico with Headers
SKU: AI0596 ₹430.70 (₹365.00 + GST)
RP2040 microcontroller chip designed by Raspberry Pi
Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz
264KB of SRAM, and 2MB of onboard Flash memory
26 × multi-function GPIO pins
2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
Onboard temperature sensor
Add to Compare
Raspberry Pi 3 – Model B Original with Onboard WiFi and Bluetooth
SKU: AI1028 ₹3,563.60 (₹3,020.00 + GST)Quick Overview:
- Product name: Raspberry Pi 3 – Model B Original with Onboard WiFi and Bluetooth
- RAM: 1GB
- Processor: Broadcom BCM2837 chipset 1.2GHz Quad-Core ARM Cortex-A53 (64Bit)
- 802.11 b/g/n Wireless LAN and Bluetooth 4.1 (Bluetooth Classic and LE)
- Storage : SD/MMC/SDIO
- Power: 5V / 700mA~3A via micro USB
Build Hat Power Supply
SKU: AI0906 ₹1,165.00 (₹987.29 + GST)
Output voltage: +8.0V DC
Minimum load current: 0.01A
Nominal load current: 6.0A
Maximum power: 48.0W
Load regulation: ±5%
Line regulation: ±5%
Add to Compare
Raspberry Pi Compute Module 4 I/O Board
SKU: AI1030 ₹3,846.80 (₹3,260.00 + GST)
External power connector (+12V, +5V)
2 x full-size HDMI 2.0 connectors
Gigabit Ethernet RJ45 with PoE support
Micro USB socket for updating Compute Module 4
PCIe Gen 2 x1 socket
Standard fan connector
Add to Compare
Free Shipping
On orders above ₹999
COD Available
Min. order ₹250 for COD
GST Invoice
Available on all orders
1,50,000+ Orders
Delivered across India
Expert Support
Toll Free: 1800 209 0998
Product categories
- Show All Categories
- 3D Printers and Parts (379)
- Batteries, Chargers and Accessories (811)
- Clearance Sale (0)
- Development Boards (438)
- DIY Learning and Robot Kits (117)
- Drone Parts (1364)
- EBike parts (140)
- Electronic Components (783)
- Electronic Modules and Displays (1201)
- FPV Freestyle Mid/High KV Drone Motors (0)
- IoT and Wireless (544)
- Mechanical Parts and Workbench Tools (241)
- Motors & Drivers & Pumps & Actuators (583)
- Sensor Modules (639)
- Development Boards (438)
- Advance Development Boards (9)
- ARM Microcontroller (20)
- AVR Microcontroller Board (13)
- Compatible with Arduino Boards (109)
- Official Arduino Boards (30)
- PIC Programmer (13)
- Raspberry Pi (234)
- Single Board Computer (3)
- Teensy Board (9)