Buy microcontroller development boards online in India at Zbotic. Our extensive collection includes official and compatible Arduino boards, Raspberry Pi single-board computers, ARM-based microcontrollers (STM32, ESP32), AVR boards (ATmega), PIC programmers, Teensy boards, and advanced development platforms. Whether you are a beginner learning embedded programming or a professional building complex IoT and automation systems, we have the right development board for your project. All boards come with detailed documentation and are sourced from authorized distributors for guaranteed authenticity.
STM32F103C8T6 Minimum System Board Microcomputer STM32 ARM Core Board
SKU: AI0253 ₹123.90 (₹105.00 + GST)Quick Overview
- Brand New and High quality STM32 Board
- Model: STM32F103C8T6.
- Core: ARM 32 Cortex-M3 CPU.
- Debug mode: SWD.
- 72MHz work frequency.
- 64K flash memory, 20K SRAM.
- 2.0-3.6V power, I/O.
Black Aluminum Heatsink for Raspberry Pi
SKU: AI0462 ₹12.86 (₹10.90 + GST)- Dimensions: 14 x 14 x 7 (LxWxH) mm
- Material: aluminum
- Color: Black
- Teeth Number: 4 rows and 5 columns
- Compatible with most Raspberry Pi cases
- Suitable for Auxiliary heat for Raspberry pi 2 model B/Raspberry Pi B+.
Digispark ATTINY85 USB Development Board
SKU: AI0036 ₹210.04 (₹178.00 + GST)Quick Review
- The Onboard, 150 ma 5 v Regulator.
- 8 k Flash Memory (about 6k after bootloader).
- The I2C and SPI (vis USI).
- The Power LED and the Test/Status LEDs.
- Built-in USB and serial were debugging).
- Support for the Arduino IDE 1.0 + (OSX/Windows/Linux)
Arduino Uno R3 CH340G ATMega328PB Development Board Compatible with Arduino
SKU: AI0002 ₹202.96 (₹172.00 + GST)Quick Review:
- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
ST-Link V2 Programmer For STM8 and STM32
SKU: AI0012 ₹22.42 (₹19.00 + GST)Quick Overview:
- PCB installed inside of aluminum alloy U disk shell, portable, safe and reliable!
- Interface definition directly marked on the shell, clear, convenient and practical!
- 5V, 3.3V offers at the same time, allowing you to program your target board with both 5V and 3.3V
- Shell characters using laser engraving, never fade off! Permanent clarity!
- 500MA internal resettable fuse, complete protection of your expensive computer motherboard!
- SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector
- SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed
Nano CH340 Chip Board Compatible with Arduino (Soldered)
SKU: AI0030 ₹283.20 (₹240.00 + GST)
Operating Voltage (logic level): 5V
8 analog inputs ports: A0 ~ A7
14 Digital input / output ports: TX, RX, D2 ~ D13
1 pair of TTL level serial transceiver ports RX / TX
Using Atmel Atmega328P-AU MCU
There is a bootloader installed in it
Standard 0.1” spacing DIP (breadboard friendly).
Manual reset switch.
Add to cart
Add to Compare
Note: - CH340 chip might not work directly with some PC/Laptop, you will need some ch340 drivers.
Arduino UNO R3 Development Board ATMEGA16U2 ATMEGA328P (DIP)
SKU: AI0001 ₹395.30 (₹335.00 + GST)Quick Review:
- 14 digital input/output pins,
- 6 analogue inputs,
- 16 MHz crystal oscillator,
- USB connection,
- power jack,
- ICSP header
USB to DC Cable (Power Cable for Arduino Uno and Mega )1 meter
SKU: AI0446 ₹25.13 (₹21.30 + GST)- Color – Black
• Cable Length – 1 Meter
• Wire Thickness – 3.5 mm
• Wire Material – LD
• Core – 2
• Core Wire 12-40
• Core Material – Copper
USB 2.0 A Male to Mini-B Male Cable-1m
SKU: AI0366 ₹41.89 (₹35.50 + GST)Quick Overview
- Connector A: Male USB A
- Connector B: Male USB Mini B
- Length: 1m
- USB Type: 2.0
Set of Aluminum Heatsink for Raspberry Pi (Large and Small)
SKU: AI0251 ₹13.45 (₹11.40 + GST)
Large Heatsink: 14 x 14 x 7 (LxWxH) mm
Small Heatsink: 9 x 9 x 5 (LxWxH) mm
Material: Aluminum
Color: White
Teeth Number
Large Heatsink: 6 Teeth
Small Heatsink: 5 Teeth
Compatible with most Raspberry Pi cases
USB Cable For Arduino UNO/MEGA-30cm
SKU: AI0079 ₹29.97 (₹25.40 + GST)USB Type: Type-A to Type-B
Cable Length: 30 cm
Shielding: Aluminum under-mold shield
Compatibility: Fully compatible with PCs
Compliance: Meets FCC requirements on KMI/RFI interference
ATMEGA16U2 Arduino Mega 2560 R3 Improved Version CH340G Board
SKU: AI0024 ₹1,224.84 (₹1,038.00 + GST)Quick Overview:
- Microcontroller CH340
- Operating Voltage 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) 6-20V
- Digital I/O Pins 54 (of which 15 provide PWM output)
- Analog Input Pins 16
- DC Current per I/O Pin 40 mA
- Dimensions : 111 x 54 x 12 (LxWxH) mm.
Transparent Acrylic Case For Arduino UNO R3
SKU: AI0045 ₹38.23 (₹32.40 + GST)Quick Overview
- Protective case of Arduino Uno.
- Color: Transparent.
- Fastened by eight screws.
- Made by high grade acrylic.
- Provides excellent protection, with fashion appearance.
- Unique design for Uno with pin leakage, which provides easy connection to other components.
High Speed Micro SD Card Reader
SKU: AI2170 ₹45.08 (₹38.20 + GST)Quick review :
- Model: C286.
- Type: USB Card Reader.
- Interface: USB2.0.
- Reader Type: USB Flash Drive.
- Supported Memory Cards: Micro SD/HC.
- Maximum Memory Supported: 512GB.
- Tata transfer rate: 480 Mbps.
2.4″ Inch Touch Screen TFT Display Shield for Arduino UNO MEGA
SKU: AI0282 ₹526.28 (₹446.00 + GST)Quick Overview
- 4″ Touch LCD TFT display module for Arduino
- 240*320 pixels resolution
- Ability to display 262000 different colors
- The shield comes equipped with a microSD card slot.
- SPFD5408 controller with built-in video RAM buffer
3 in 1 Aluminum Heat Sink Set for Raspberry Pi 3/4
SKU: AI2147 ₹12.74 (₹10.80 + GST)Material: Lightweight aluminum with adhesive backing strip
Set Includes: Three heatsinks
Thermal Resistance: 27°C/W
Color: Silver
Weight: 3g for a set of 3 heatsinks
SPI BIOS FLASH Non-Dismantling Test Program Clip SOP8 24C 93C 25LF
SKU: AI5260 ₹162.84 (₹138.00 + GST)- Pitch Lead: 2.54mm
- Pitch row: 3.81mm
- SOIC 8 / SOP8 Clip
- Supports many different EEPROMS 150mil / 209mil – 24Cxx, 25Cxx, 93Cxx, 95xxx, 25Lxx
Pro Mini ATMEGA168PA 5V/16M Improved Version Module
SKU: AI0454 ₹199.42 (₹169.00 + GST)- ATmega168PA running at 16MHz
- 100% Arduino compatible board
- Colour: Blue
- Material: PCB
- Size: 33x18x6mm
USB Cable for Arduino UNO – 30cm (Black)
SKU: AI0368 ₹45.08 (₹38.20 + GST)Quick Overview
- USB Type: Type-A to Type-B
- Color – Black
- Cable Length – 30cm
- Wire Thickness – 4 mm
- Wire Material – PVC
- Core – 4
- Core Wire -10-40, 12-40
- Core Material -Copper
CNC Shield V3 Engraving Machine 3D Printer A4988 DRV8825 Driver Expansion Board
SKU: AI0180 ₹97.94 (₹83.00 + GST)Quick Overview
- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
- Coolant enable
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
- Compact design.
- 4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
HDMI to HDMI Cable 0.5 Meter Flat Pure Copper Black
SKU: AI2485 ₹135.70 (₹115.00 + GST)QUICK OVERVIEW:
- Connector: 24K gold plated
- Cable: Flat.
- Length: 0.5M.
- Supports all HDTV devices including 1.4
- Supports resolution up to 1080P
- Supports 3D and Blu-ray Disc
ATmega328P 5V Nano V3.0 Development Board 16MHz CH340 Type-C
SKU: AI2003 ₹192.34 (₹163.00 + GST)QUICK OVERVIEW:
- Product: Arduino NANO
- Model: Nano V3.0 CH340
- Processor: ATmega328
- Operating Voltage: 5V
- Best for your electronic projects
- Tiny size makes it perfect for compact projects.
Blue 1.8 Inch ST7735 TFT LCD Module with 4 IO 128*160
SKU: AI2421 ₹273.76 (₹232.00 + GST)QUICK OVERVIEW:
- Display Size: 1.8″
- Driver IC: ST7735
- Input Voltage (V): 3.3 to 5
- Pixel Resolution: 128 x 160
- Interface Type: SPI
Arduino Mega 2560 R3 Board
SKU: AI0025 ₹1,187.08 (₹1,006.00 + GST)Quick Review:
- 54 digital input / output terminals (14 of which have programmable PWM outputs).
- 16 analog inputs.
- 4 UARTs (hardware serial ports).
- 16 MHz crystal clock.
- Operating voltage: 6 ~ 12v.
- Dimensions: 110 x 53 x 15 mm.
NANO IO Shield Expansion Board For Arduino Screw Terminals
SKU: AI2546 ₹151.04 (₹128.00 + GST)Compatible with Arduino NANO
All digital and analog pins breakout
Compact size.
Leads all pins out, convenient for wiring and doing experiments.
Dimensions: 53 x 36 x 12 (LxWxH) mm.
Weight: 22 gm.
Cable For Arduino Nano USB A to MINI B (Nickel Plated Connector)-1.2 M
SKU: AI2086 ₹42.72 (₹36.20 + GST)- USB Type: Type-A to Mini-B
- Weight: 100 gm.
- Length: 1.2 m.
- Nickel Plated Connector
- Exclusively designed for Arduino boards.
Ultra-thin Raspberry PI Routing Chip Radiator with Thermal Adhesive Size: 30x40x5MM
SKU: AI2108 ₹26.43 (₹22.40 + GST)Product: Routing Chip Radiator
Material: aluminum
Color: Black
Teeth Number: 7 rows and 14 columns
Compatible with most Raspberry Pi cases
Suitable for Auxiliary heat for Raspberry pi 2 model B/Raspberry Pi B+.
Cable for Arduino UNO/MEGA (USB A to B)-1M
SKU: AI1400 ₹61.36 (₹52.00 + GST)QUICK OVERVIEW
- Product Name: Cable for Arduino UNO/MEGA (USB A to B)-1M
- Fully compatible with the PC.
- Moulded strain relief and PVC over moulding to ensure a lifetime of error-free data transmissions.
- Aluminium under mould shield helps meet FCC requirements on KMI/RFI interference.
- Foil and braid shield complies with fully rated cable specifications reducing EMI/FRI interference.
PIC ICD2 PICKit2 PICKIT3 Universal Programming Adapter Programmer Board
SKU: AI0556 ₹116.82 (₹99.00 + GST)Quick Overview:
- Applicable for 40 pin IC
- Prime high-quality, dropship good looks
- Reasonable transport forged
- For Arduino building
Micro USB-A to Micro-B Cable -100cm
SKU: AI0633 ₹35.87 (₹30.40 + GST)Quick Overview:
- USB Type: Type-A to Micro-B
- Length: 100cm
- Exclusively designed for Arduino boards.
Cable for Arduino Nano (USB 2.0 A to USB 2.0 Mini B) 80cm – Black
SKU: AI6508 ₹33.98 (₹28.80 + GST)- Color: White & Black
- Cable Length: 80 Cm
- Wire Thickness: 4 mm
- Wire Material: PVC
- Core: 4
- Core Material: Copper
- Core Wire: 10-40, 12-40
Ethernet W5100 Shield Network Expansion Board w/ Micro SD Card Slot for Arduino
SKU: AI0414 ₹789.42 (₹669.00 + GST)Quick Overview
- Based on the W5100Based on the Wiznet W5100 allows an Arduino board to connect to the internet.
- Stackable Design, can directly be supported by for Arduino official Ethernet Library.
- Supports up to four simultaneous socket connections
- Can be used to store files for serving over the network.
- Can be accessed using the Mini SD TF library.
- IEEE802.3af compliant
- Low output ripple and noise (100mVpp)
- Overload and short-circuit protection
40 pin GPIO Reference Board For Raspberry Pi B+/Respberry Pi 2
SKU: AI0834 ₹18.41 (₹15.60 + GST)
Compatible with all 40 pin GPIO headers on Raspberry Pi’s such as Model A+, Model B+, Pi 2, Pi 3, Pi Zero
Dimensions: 62 x 11 x 2mm(LxWxH).
Weight: 3gm.
No of IO pins: 40.
Color: Red.
Without soldered jumpers.
HDMI Female to Mini HDMI Male Adapter
SKU: AI0603 ₹42.72 (₹36.20 + GST)Quick Overview
- This Mini HDMI to HDMI adapter is capable of carrying the increased bandwidth of HDMI 2.0 at 18 Gbps.
- It Supports Audio Return Channel (ARC), HDMI Ethernet Channel (HEC), 48 Bit Deep Color, 32 channel audio, HDCP, Dolby True HD 7.1 audio, and 3D video.
- Also Supports resolutions up to 4Kx2K (UHD) including 4096×2160, 3840×2160, 2560×1600, 2560×1440, 1920×1200, and 1080p
- Gold plated male to female adapter resists corrosion and provides rigidity. Grip treads help easy plugging and unplugging.
White Micro USB Cable for Raspberry Pi 3
SKU: AI2082 ₹19.59 (₹16.60 + GST)- Interface: USB to Micro USB
- Colour: White
- Cable Length: 30CM
- Current Rating: 2.5 Amp
- Voltage Rating: 5V
Uno WiFi R3 ATMEGA328P NodeMCU ESP8266 8MB Memory USB-TTL CH340G Compatible for Arduino UNO
SKU: AI0341 ₹464.92 (₹394.00 + GST)Quick Overview:
- USB-TTL converter.
- Logic Level: 5V.
- Operating Supply Voltage: 5V.
- Digital I/O Pins: 14.
- Analog I/O Pins: 6.
UNO Based ESP8266 Nodemcu Development Board
SKU: AI0255 ₹245.44 (₹208.00 + GST)Quick Overview
- Based on ESP-8266EX.
- Arduino compatible, using Arduino IDE to program.
- Support OTA wireless upload.
- Onboard 5V 1A Switching Power Supply (highest input voltage 24V).
- The direct use of Arduino IDE development, the same operation with Arduino UNO.
- 6. Operating Voltage: 3.3V
- 7. Digital I/O Pins: 11
- 8. Analog Input Pins: 1
GPIO Flat Grey Cable Female to Female Connectors for Raspberry Pi (40pin 20CM )
SKU: AI5241 ₹56.64 (₹48.00 + GST)- Length: 20cm.
- Weight: 30gm.
- Gender: Female to Female
- Compatible With Raspberry Pi Model B+
- GPIO Connector: 40-Pin
LilyPad 328 ATmega328P Main Board 16M Compatible with Arduino
SKU: AI0102 ₹292.64 (₹248.00 + GST)Quick Overview
- Microcontroller: ATmega328P
- Operating Voltage: 2.7V to 5.5V
- Digital I/O Pins: 14
- PWM Channels: 6
- Analog Input Channels: 6
- DC Current per I/O Pin: 40mA
- Board will run from 2V to 5V
Official Case for Raspberry Pi 3 Model B – Red/White
SKU: AI0048 ₹87.32 (₹74.00 + GST)Quick Review
- High-quality ABS construction
- Available in both red/white and black/grey
- Removable side panels and lid for easy access to GPIO, camera and display connectors
- Light pipes for power and activity LEDs
- Extraordinarily handsome
50 CM Micro USB Cable
SKU: AI2098 ₹28.67 (₹24.30 + GST)
This is Multipurpose Micro USB Cable mainly used for Arduino boards and Flight Controller Boards as well as can be...
Add to cart
Add to Compare
Official Raspberry Pi Black 4 in 1 Heat Sink Set Aluminum for Pi 4B
SKU: AI1422 ₹62.54 (₹53.00 + GST)- Product Name: Official Raspberry Pi Black 4 in 1 Heat Sink Set Aluminum for Pi 4B
- Suitable for Raspberry Pi B+, Pi 2 B, Pi 3B, Pi 4B
- Material: aluminum
- Color: Black
Waveshare DIY HDMI Cable Right-angle HDMI Plug Adapter
SKU: AI2064 ₹184.08 (₹156.00 + GST)Quick Overview
- Right-angle HDMI plug adapter for DIY HDMI cable assemblies
- Converts to female HDMI interface via FFC or cable assembly
- Compact dimensions: approximately 18 × 16.5 × 16.5 mm
- Perfect for tight or low-clearance installations
- Ideal for custom HDMI cable building in embedded boards, displays, or compact devices
- Durable and reliable connection for HDMI signal transmission
Micro USB Cable for Raspberry Pi- 80CM
SKU: AI0401 ₹37.29 (₹31.60 + GST)Quick Overview
- Length: 80CM
- Diameter: 3 mm.
- Color: Black
- Material: PE/PVC/ABS
Raspberry Pi Pico
SKU: AI0554 ₹402.38 (₹341.00 + GST)QUICK OVERVIEW
- RP2040 microcontroller chip designed by Raspberry Pi
- Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz
- 264KB of SRAM, and 2MB of onboard Flash memory
- 26 × multi-function GPIO pins
- 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
- Onboard temperature sensor
GD32F103C8T6 Minimum System Board Microcomputer STM32 ARM Core Board
SKU: AI5800 ₹139.24 (₹118.00 + GST)GD32F103C8T6 Minimum System Board Microcomputer STM32 ARM Core Board:
- 100% Brand new and high-quality STM32 Board
- Model: GD32F103C8T6.
- Core: STM32 ARM
Type-C Male to Female Cable with Switch for Raspberry Pi 4
SKU: AI1476 ₹153.40 (₹130.00 + GST)- Length: 20cm
- Color: Black
- Connector Type: Type C Female to Type C Male
USB Cable for Arduino UNO – 50cm (Black)
SKU: AI2140 ₹36.34 (₹30.80 + GST)Product Name: USB Cable for Arduino UNO – 50cm (Black)
USB Type: Type-A to Type-B
Color: Black
Cable Length: 50cm
Compatibility: Compatible with Arduino Uno, Arduino Mega 2560, and other boards with USB female A port
USB Standard: USB 2.0
Sensor Shield V5 Expansion Board For Arduino
SKU: AI0593 ₹89.68 (₹76.00 + GST)Retain the merits of the V4.0 version
Laminated design
PCB immersion gold processing technology
IIC interface
Bluetooth module communication interface
SD card module communication interface
APC220 wireless rf modules communication interface
RB URF v1.1 ultrasonic sensors interface
12864 LCD string of line and parallel interface
32 servo controller interface
5V 3A USB to Type C Cable With ON/OFF Switch Power Control for Raspberry Pi 4B (1 Meters Black)
SKU: AI3498 ₹95.58 (₹81.00 + GST)QUICK OVERVIEW:
- Product: 5V 3A USB to Type C Cable With ON/OFF Switch Power Control for Raspberry Pi 4B
- Length: 1M
- Diameter: 3 mm.
- Color: Black
- Material: PE/PVC/ABS
- cable type : Type C
- comes with ON/OFF Switch
2.8 inch SPI Touch Screen Module TFT Interface 240*320
SKU: AI2151 ₹913.41 (₹774.08 + GST)QUICK OVERVIEW:
- Touch: Resistive
- Display Size: 2.8″
- Size: 8.5 x 4.8cm
- Input Voltage (V): 3.3 to 5
- Driver IC: ILI9341
- Color Depth: 262K/65K
- Resolution (dots): 240 x 320
2.8 inch SPI Screen Module TFT Interface 240 x 320 without Touch
SKU: AI2771 ₹515.66 (₹437.00 + GST)
QUICK OVERVIEW:
Display Size: 2.8″
- Size: 8.5 x 4.8cm
- Input Voltage (V): 3.3 to 5
- Color Depth: 262K/65K
- Resolution (dots): 240 x 320
Square Cap for 12*12*7.3mm Square Tachile Switch Red(Pack of 10)
SKU: AI4245 ₹16.52 (₹14.00 + GST)- Product Name: Switch Cap
- Material: Plastic
- Inner Size: 3.8 x 3.4mm/0.15 x 0.13inch(L*W)
- Overall Size : 12x12x5.8mm/0.47×0.47×0.23inch(L*W*H)
- Detailed Size: Pls see above picture
- Fit Switch: 12*12*7.3mm Square-Head Tactile Switch
- Net Weight: 8g
- color: Red
DIY Nano IO Shield V1.0
SKU: AI3422 ₹77.88 (₹66.00 + GST)Compatible with Arduino NANO
All digital and analog pins breakout
Compact size.
Leads all pins out, convenient for wiring, and doing experiments.
Dimensions: 53 x 36 x 12 (LxWxH) mm.
Weight: 22 gm.
Arduino Mega 2560 R3 Sensor Shield V2.0
SKU: AI3412 ₹147.50 (₹125.00 + GST)PCB finest Immersion Gold processing
Plug it easier to set up a variety of commonly used module interface
JoyStick Shield Module Robotics Control
SKU: AI3228 ₹112.10 (₹95.00 + GST)QUICK OVERVIEW:
- 2-Axis joystick
- Bluetooth / Serial interface
- I2C interface
- nRF24L01 interface
- Nokia 5110 LCD interface
- Interface connector
- Power switch to switch between 3.3 and 5V
Leonardo R3 Board Micro-USB Compatible with Arduino
SKU: AI1528 ₹488.52 (₹414.00 + GST)QUICK OVERVIEW
- Microcontroller: ATmega32u4
- Operating Voltage: 5V
- Input Voltage (Recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 20
- PWM Channels: 7
- Analog Input Channels: 12
New High Quality Transparent ABS Case for Raspberry Pi 3/3+ with Slot for Cooling Fan & GPIO
SKU: AI1475 ₹80.24 (₹68.00 + GST)- This simple case provides tough protection for your raspberry pi along with access to ports
- High Quality two-piece injection-molded ABS enclosure
- Click together design, no screws, standoffs or elastic bands required
- It is easy to use. You just need to click them together after you fix your pi board on it with screws.
- 4 x Non-slip Silicone Gaskets provided, which can be stuck to the bottom four corners of the box, to prevent it from slipping when placed on a surface.
Digispark ATTINY85 Mini USB Development Board
SKU: AI0966 ₹239.54 (₹203.00 + GST)High Performance, Low Power AVR® 8-Bit Microcontroller
Non-volatile Program and Data Memories
512 Bytes In-System Programmable EEPROM
512 Bytes Internal SRAM
USI – Universal Serial Interface (12C, SPI, 1-wire) with Start Condition Detector
10-bit ADC
4 Single Ended Channels
Two Differential ADC Channel Pairs with Programmable Gain (1x, 20x)
Low Power Consumption
Active Mode:1 MHz, 1.8V: 300 µA
Transparent Acrylic Case Shell Enclosure Gloss Box For Arduino Mega 2560 R3
SKU: AI5258 ₹48.38 (₹41.00 + GST)- Compatible with Arduino MEGA2560 R3 (unassemble).
- The cover can be adjusted.
- Color: Transparent.
- Material: Acrylic.
HDMI Female to HDMI Male Right, Angle Adapter for Raspberry Pi 3
SKU: AI3488 ₹37.76 (₹32.00 + GST)QUICK OVERVIEW:
- Supports resolutions up to 4Kx2K (UHD) including 4096×2160, 3840×2160, 2560×1600, 2560×1440, 1920×1200 & 1080p
- HDMI Male-Female Adapter Right Angle 90 Degree
- Gold Plated HDMI Male to Female Connector Supports 4K for TV Stick
- Connector 1: HDMI Female
- Connector 2: HDMI Male
- Angle: Right Angle
- Compatibility: Raspberry Pi 3 and other HDMI-enabled devices
- Compliance: HDMI 2.0 standard
- Bandwidth: Up to 18 Gbps
- Material: High-quality construction
- Installation: Plug-and-play
- Dimensions: Standard HDMI adapter size
- Color: Black
Thickened Thermal Conductive Silica Gel Pad Size: 10x10x6MM
SKU: AI3372 ₹42.48 (₹36.00 + GST)QUICK OVERVIEW:
- Product: Thermal Conductive Silica Gel Pad
- Product type: Thermal Insulator Gel pad
- Operating Temperature: -40 ℃ – 200 ℃ will not melt
- Color: Color of Actual Product Can vary from given Image
- Size: 10x10x6MM
Waveshare 7 inch Capacitive Touch Display for Raspberry Pi, DSI Interface, 800×480
SKU: AI1551 ₹4,552.44 (₹3,858.00 + GST)QUICK OVERVIEW
- Display Size:7 inches
- Resolution:800×480
- Display Port:DSI
- Touch Type:Capacitive
- Touch Points:5 Points
18650 Battery Holder/Development Board Compatible With Raspberry Pi3B/3B+
SKU: AI3461 ₹156.94 (₹133.00 + GST)18650 Battery Holder/Development Board
- Compatible With Raspberry Pi3B/3B+
- Can Provide Output Current Up-to 6A
- I2C Battery Monitoring
- Built-in Battery Charger
Nano IO Expansion Shield for Arduino NANO 328P
SKU: AI2545 ₹149.86 (₹127.00 + GST)QUICK OVERVIEW:
- All digital and analog pins breakout
- XBee and nRF24L01+ module interface
- External power supply current support
- Compatible pin map for electronic brick
- Output Voltage-3.3V
- 7-12V external power supply.
HDMI to VGA Converter with Audio for Raspberry Pi
SKU: AI0585 ₹155.76 (₹132.00 + GST)Quick Overview
- Interface: HDMI Input, VGA Output.
- Converts complete HDMI into VGA video.
- Resolution of up to 720P/1080i/1080P
- Plug and play, no driver needed.
- Powered by HDMI, no external power adapter required.
Arduino Uno R3 Beginners Kit
SKU: AI0491 ₹2,439.06 (₹2,067.00 + GST)QUICK OVERVIEW
- Great for Starting with Arduino Programming
- A variety of components are included in this pack to try out different projects.
5 Inch Touch Screen HDMI Interface TFT LCD for Raspberry Pi 3 model B + Touch Pen
SKU: AI2389 ₹2,469.74 (₹2,093.00 + GST)QUICK OVERVIEW:
- Display Size: 5″
- Resolution: 800 x 480 pixel
- Supply Voltage: 5V @1A
- Very easy to assemble with Raspberry Pi.
White 3 in 1 Heat Sink Set Aluminum for Raspberry Pi 4B 1pcs 15*14*5mm 1pcs 8*8*4mm 1pcs 8*8*4mm
SKU: AI4204 ₹12.86 (₹10.90 + GST)- 100% brand new and high quality.
- 3 pcs Aluminum heatsink kit for Raspberry Pi2 B B+ model.
- Cool down the board and make your Raspberry operate safely.
- The heatsink have a layer of adhesive on the back of them. Simply peel the adhesive off and stick onto your board.
- Dimension: small 2 Pcs ( 8mm x 8mm x 4mm)big( 15mm x 14mm x 5mm).
CH376S USB Module U Disk Read Write Module
SKU: AI2762 ₹224.20 (₹190.00 + GST)QUICK OVERVIEW:
- Supply Voltage: 5V
- Internal curing CH376S chip FAT file system, file operations simple and fast
- Support including USB thumb drives, USB hard drives, USB flash drives, and USB storage devices, USB card reader
- Compatible with CH372, host compatible with CH375
4 in 1 Heat Sink Set Aluminum for Raspberry Pi 4B (White)
SKU: AI4206 ₹26.55 (₹22.50 + GST)- Reduces the risk of hardware failure due to overheating
- Low profile, will fit into most cases.
- Simple, Passive cooling. No need for noisy fans.
- Perfectly sized for the RPi’s CPU
HDMI to HDMI Cable 1 Meter Round High Quality Copper-Clad Steel Black for Raspberry Pi 3
SKU: AI4103 ₹87.32 (₹74.00 + GST)- Product Name: HDMI to HDMI Cable 1 Meter Round High Quality Copper-Clad Steel Black
- Length: 1 M.
- Weight: 48 gm.
- Color: Steel Black
- High-Speed HDMI
- Fully shielded audio and video lines for optimum reduction of electromagnetic interference.
- 3d Transmission due to extending bandwidth.
- Maximum Digital Resolutions: 4K x 2K @ 30 Hz
5 in 1 Pure Copper Heat Sink for Raspberry 4B
SKU: AI3500 ₹243.08 (₹206.00 + GST)QUICK OVERVIEW:
- Material: Pure Capper
- Suitable for: Raspberry pi 4B
- Colour: Copper
- Better heat dissipation than Aluminium heat Sink
Raspberry Pi 8 channel Level Switching (3.5V to 5V) IO Module
SKU: AI3110 ₹81.42 (₹69.00 + GST)
Voltage level: 1.8V-6V
Dimension: 38mm x 31.6mm
Conversion level range: 1.8 V-6 V
Instructions for use: (3.3 V, 5 V to each other)
4 pairs of power supply interfaces, supports more situation
Use tantalum capacitors for power filter, provides more stability
VCCB 5V power supply (can be an external 5V power supply)
Short USB to Micro-USB Power Line Cable (17cm)
SKU: AI3486 ₹80.24 (₹68.00 + GST)Specification:
- Cable length: 17 cm
- Colour: Black
- Cable Type: USB to Micro USB
- Simple to store in any device case
- Good quality connector and hence longer life.
HDMI to HDMI 1M Flat Pure Copper Black
SKU: AI1474 ₹116.82 (₹99.00 + GST)- Connector: Gold plated
- Cable: Flat.
- Length: 1 M.
- Supports all HDTV devices including 1.4
- Supports resolution up to 1080P
- Supports 3D and Blu-ray Disc
- Transfer digital audio & video signals at warp speed of 10.2 gigabytes per second
16×2 (1602) LCD Keypad Shield – Blue Backlight for Arduino
SKU: AI0820 ₹187.62 (₹159.00 + GST)
Blue Backlight with white words
uses 4 Bit Arduino LCD Library
Left, Right, Up, Down and Select buttons
Screen contrast adjustment
Arduino Reset button
Operating Voltage is 5V
Raspberry Pi 4 Model-B with 4 GB RAM
SKU: AI1029 ₹11,778.76 (₹9,982.00 + GST)
1GB/2GB/4GB Variants
Quad-Core 64-bit Broadcom 2711, Cortex A72 Processor
WLAN 802.11 b/g/n/ac (2,4 + 5,0 GHz)
LAN RJ45 10/100/1000 Mbit (Gigabit LAN over USB 3.0)
Operating Power 5V@3A via USB Type-C port
Dual-Display Micro HDMI Ports which supports H 265 Decode for 4K Video @60p
Raspberry 4B Black Injection Molding Premium Case Supporting 3007 Fans
SKU: AI1210 ₹217.12 (₹184.00 + GST)
Easy three-piece installation design.
Easy fitment of Pi board.
Case color: Black.
Rubber pad grip at the bottom.
Precise access to all port and cable strips.
Injection Molded Construction.
Original Arduino Uno Rev3 A000066
SKU: AI5973 ₹1,780.62 (₹1,509.00 + GST)Manufacturer: Arduino Officials
Micro-controller : ATmega328P.
Operating Voltage: 5V.
Input Voltage (recommended) : 7-12V.
Digital I/O Pins: 14 (of which 6 provide PWM output).
Analog Input Pins: 6.
Free Shipping
On orders above ₹999
COD Available
Min. order ₹250 for COD
GST Invoice
Available on all orders
1,50,000+ Orders
Delivered across India
Expert Support
Toll Free: 1800 209 0998
Product categories
- Show All Categories
- 3D Printers and Parts (379)
- Batteries, Chargers and Accessories (811)
- Clearance Sale (0)
- Development Boards (438)
- DIY Learning and Robot Kits (117)
- Drone Parts (1364)
- EBike parts (140)
- Electronic Components (783)
- Electronic Modules and Displays (1201)
- FPV Freestyle Mid/High KV Drone Motors (0)
- IoT and Wireless (544)
- Mechanical Parts and Workbench Tools (241)
- Motors & Drivers & Pumps & Actuators (583)
- Sensor Modules (639)
- Development Boards (438)
- Advance Development Boards (9)
- ARM Microcontroller (20)
- AVR Microcontroller Board (13)
- Compatible with Arduino Boards (109)
- Official Arduino Boards (30)
- PIC Programmer (13)
- Raspberry Pi (234)
- Single Board Computer (3)
- Teensy Board (9)