Looking for Adafruit Ina 210 Feather? Adafruit INA 210 Feather Wing is available at Zbotic with fast shipping across India.
The INA219 FeatherWing makes power-monitoring problems a thing of the past. Instead of struggling with two multimeters, you can just use the handy INA219B chip on this breakout to both measure both the high side voltage and DC current draw over I2C with 1% precision. Works with any and all Feathers! Communicates over I2C so its super-simple to use, you can even change the I2C address to have up to 4 of these Wings on one Feather.
Many current-measuring devices are only good for low side measuring. That means that unless you want to get a battery involved, you have to stick the measurement resistor between the target ground and true ground. This can cause problems with circuits since electronics tend to not like it when the ground references change and move with varying current draw. This chip is much smarter – it can handle high side current measuring, up to +26VDC, even though it is powered with 3.3V. It will also report back that high side voltage, which is great for tracking battery life or solar panels.
A precision amplifier measures the voltage across the 0.1 ohm, 1% sense resistor. Since the amplifier maximum input difference is ±320mV this means it can measure up to ±3.2 Amps. With the internal 12 bit ADC, the resolution at ±3.2A range is 0.8mA. With the internal gain set at the minimum of div-8, the max current is ±400mA and the resolution is 0.1mA. Advanced hackers can remove the 0.1 ohm current sense resistor and replace it with their own to change the range (say a 0.01 ohm to measure up 32 Amps with a resolution of 8mA)
Package Includes:
1 x Adafruit INA 210 Feather Wing
About Adafruit Ina 210 Feather
Adafruit INA 210 Feather Wing is available at Zbotic, India’s trusted electronics and robotics store. Manufactured by Adafruit, this product is designed for hobbyists, students, and professionals working on electronics, robotics, and DIY projects.
Product Details
- Brand: Adafruit
- SKU: AI1794
- Category: Boards Compatible with Arduino
Why Buy from Zbotic?
Zbotic offers a wide range of electronics components, development boards, sensors, and robotics parts. All products are quality-checked and shipped within 24 hours. Free shipping on qualifying orders. We offer COD (Cash on Delivery) and secure online payment options. Our customer support team is available to help with technical queries about Adafruit Ina 210 Feather and other products.
Applications
Adafruit Ina 210 Feather can be used in a variety of projects including Arduino projects, Raspberry Pi builds, drone assembly, 3D printing, IoT applications, and educational experiments. Whether you are a beginner or an advanced user, this component provides the reliability and performance you need. Order your Adafruit Ina 210 Feather today and start building.
About Adafruit Ina 210 Feather
Adafruit INA 210 Feather Wing is available at Zbotic, India’s trusted electronics and robotics store. Manufactured by Adafruit, this product is designed for hobbyists, students, and professionals working on electronics, robotics, and DIY projects.
Product Details
- Brand: Adafruit
- SKU: AI1794
- Category: PCT and DC Power Connectors
Why Buy from Zbotic?
Zbotic offers a wide range of electronics components, development boards, sensors, and robotics parts. All products are quality-checked and shipped within 24 hours. Free shipping on qualifying orders. We offer COD (Cash on Delivery) and secure online payment options. Our customer support team is available to help with technical queries about Adafruit Ina 210 Feather and other products.
Applications
Adafruit Ina 210 Feather can be used in a variety of projects including Arduino projects, Raspberry Pi builds, drone assembly, 3D printing, IoT applications, and educational experiments. Whether you are a beginner or an advanced user, this component provides the reliability and performance you need. Order your Adafruit Ina 210 Feather today and start building.
Adafruit INA 210 Feather Wing Overview
The Adafruit INA 210 Feather Wing adds precise high-side power monitoring to any Feather board using the INA219B chip. Over I2C it measures bus voltage up to 26 V and DC current draw with 1% precision, letting you profile battery packs, sensors and motors without extra wiring hassles.
Key Features of Adafruit INA 210 Feather Wing
- Onboard INA219B high-side current and voltage sensor with 1% precision
- Measures bus voltage up to 26 V DC and corresponding load current
- Built-in 3.3 V regulator for stable sensor supply from any Feather
- I2C interface with adjustable address for up to four Wings on one Feather
- Feather-compatible 0.1″ headers for plug-and-play stacking
- Genuine Adafruit product with fast shipping from Zbotic across India
Applications and Use Cases
- Battery health monitoring on off-grid solar systems
- Profiling current consumption of IoT sensor nodes
- Measuring motor draw in robotics and RC projects
- Power diagnostics in wearable or portable electronics
- Evaluating efficiency of DC converters and regulators
How to Use Adafruit INA 210 Feather Wing
Slide the Wing onto any 3.3 V Feather board’s header, then connect via I2C (SDA/SCL). Install the Adafruit INA219 library in your Arduino IDE, upload an example sketch, and observe real-time voltage and current readings over the serial monitor. Use the solder jumpers to change I2C address if stacking multiple Wings.
Why Buy from Zbotic?
- Genuine Products: All items sourced from authorized distributors
- Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
- Free Shipping: Free delivery on qualifying orders
- COD Available: Cash on Delivery, UPI, cards, net banking
- Technical Support: Expert help for setup and troubleshooting
- Easy Returns: Hassle-free replacement for defective products
Frequently Asked Questions
What voltages and currents can the INA 210 Feather Wing measure?
The onboard INA219B chip measures bus voltages from 0 V to 26 V DC with 1% precision and uses its built-in shunt resistor to sense DC current draw on the high side of your circuit.
How do I set up multiple INA 210 Wings on one Feather?
The Wing includes solder-jumper address pins for the INA219B; by setting these jumpers you can configure up to four unique I2C addresses and stack multiple Wings on a single Feather board.
Will this Wing work with all Feather boards?
Yes, the Adafruit INA 210 Feather Wing is designed to stack on any Feather form-factor board (3.3 V logic) and communicates via I2C, making it compatible with both single-board and cellular Feather varieties.
ESP8266 Smart Plug: WiFi Power Switch Under ₹300
Esp8266 Smart Plug Wifi — this DIY project gives you smartphone control over real-world devices at a fraction...
Read More →
Arduino Prototyping Tools: PCB, Perfboard & Breadboard Guide
Every Arduino project goes through a journey: from a concept sketched on paper, to a breadboard prototype covered...
Read More →
Arduino CAN Bus Tutorial: MCP2515 Module for Automotive Projects
The Arduino CAN bus MCP2515 module is your gateway to reading automotive sensor data, communicating with vehicle ECUs,...
Read More →Technical Specifications
| Brand | Adafruit |
|---|---|
| SKU | AI1794 |
| Weight | 0.007 kg |
| Availability | Out of Stock |
Applications & Use Cases
The Adafruit INA 210 Feather Wing is a versatile boards compatible with arduino used across a wide range of applications including electronics learning, robotics, home automation, sensor interfacing, and motor control.
Common use cases:
- Learning programming and electronics
- Building a line-following robot
- Creating a home automation hub
This product is ideal for students, hobbyists, and electronics beginners.
Technical Tip: Arduino Uno is the standard learning board. Mega offers more pins for complex projects. Nano suits breadboard prototyping.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
- Genuine Adafruit product sourced from authorized channels
Sarthak Yadav (verified owner) –
Outstanding quality Adafruit INA 210 Feather Wing. I teach electronics and order these in bulk for my classes.
Farhan Tiwari (verified owner) –
Excellent Adafruit INA 210 Feather Wing! Built a weather station with this. Everything works as expected.
Aditya Desai (verified owner) –
Great quality Adafruit INA 210 Feather Wing. Uploaded my first sketch and it worked flawlessly. Ideal for beginners.
Vivek Iyer (verified owner) –
Using this Adafruit INA 210 Feather Wing for my smart farming project. Reliable and easy to interface.
Deepak Kapoor (verified owner) –
This Adafruit INA 210 Feather Wing made my robotics project so much easier. Highly recommended for students.
Jayesh Ghosh (verified owner) –
Great Adafruit INA 210 Feather Wing for my college mini project. Got good marks thanks to this working perfectly!
Tanmay Rathore (verified owner) –
Very satisfied with this Adafruit INA 210 Feather Wing. Fast shipping and genuine components. Zbotic is the best!
Neha Singh (verified owner) –
Okay Adafruit INA 210 Feather Wing. Works but had to troubleshoot driver issues initially.
Ananya Rathore (verified owner) –
Nice Adafruit INA 210 Feather Wing for the price. Using it in my college project, performs well.
Farhan Sharma (verified owner) –
Great Adafruit INA 210 Feather Wing for my college mini project. Got good marks thanks to this working perfectly!
Vinay Rathore (verified owner) –
This Adafruit INA 210 Feather Wing made my robotics project so much easier. Highly recommended for students.
Nikhil Das (verified owner) –
Pretty good Adafruit INA 210 Feather Wing. Compatible with most libraries. Happy with the purchase.