Buy battery protection boards (BMS) online in India at Zbotic. Our range includes battery management system boards for 1S to 16S lithium-ion and LiPo battery packs, with current ratings from 3A to 100A. These BMS modules provide essential overcharge, over-discharge, short-circuit, and overcurrent protection for safe battery operation. Available in common-port and separate-port configurations for 3.7V, 7.4V, 11.1V, 14.8V, and higher voltage battery packs. Essential for DIY power banks, eBike batteries, and custom lithium battery assemblies.
TP4056 Battery Charging Protection Module (Type C)
SKU: AI0501 ₹19.47 (₹16.50 + GST)Input interface: Type C
Current Protection: Yes
Charging mode: Linear charging.
Current: 1A adjustable.
Charge precision: 1.5%.
Input voltage: 4.5V-5.5V.
Full charge voltage: 4.2V.
TP5100 2A Lithium Ion 18650 Battery Charger Module
SKU: AI0407- Double 8.4v / 4.2v lithium rechargeable single
- Programmable charge current. 0. 1A-2A
- Programmable steady precharge current 10% -100%
- Wide operating voltage, maximum reach I5V
- Red and green LED charge status indicator
- Chip temperature protection, overcurrent protection, undervoltage protection
- Battery temperature protection, reverse battery shutdown, short circuit protection
- Switching frequency 400Khz, usable inductance 20uH and more
- PWR_ON Power battery for switching control
TP4056 1A Li-ion Lithium Battery Charging Module With Current Protection-Mini USB
SKU: AI0262Quick Overview
- Input interface: Mini USB.
- Current: 1A adjustable.
- Charge precision: 1.5%.
- Input voltage: 4.5V-5.2V.
- Full charge voltage: 4.2V.
- Battery over-current protection: 3 A
- The battery Undervoltage protection: 2.5 V
5V Step-Up Power Module Lithium Battery Charging Protection Board
SKU: AI0013 ₹25.25 (₹21.40 + GST)BAT Discharging Stop Voltage:2.9V
Discharging Efficiency:85%(input 3.7V output 5V/1A)
Charging and discharging indication
Internally installed charging and discharging power MOS
Preset 4.2V charging voltage, precision ±1%
Max 8uA standby current
Integration charging management and discharging management
Intelligent temperature control and overtemperature protection
Integration output overvoltage protection, short circuit protection, overload protection
3S 10A 12V 18650 Lithium Battery Charger Board Protection Module
SKU: AI0566 ₹51.45 (₹43.60 + GST)Quick Overview:
- Over-discharge voltage range: 2.3–3.0V ± 0.05V
- Recharge voltage range: 4.25–4.35V ± 0.05V
- Operating current: 6–8A
- Operating temperature: -40 to +50℃
- Current limit: 10–13A
1S 18650 Li-ion Lithium Battery BMS Charger Protection Board for 3.7V Battery.
SKU: AI2818 ₹12.74 (₹10.80 + GST)QUICK OVERVIEW
- High accuracy voltage detection circuit;
- Using high voltage device charging terminal;
- The built-in three-stage overcurrent detection circuit (overcurrent 1, overcurrent 2, load short circuit);
- The battery charge and discharge can control the MOS transistor;
3S 11.1V 10A 18650 Lithium Battery Overcharge And Over-current Protection Board-Good Quality
SKU: AI1052 ₹66.08 (₹56.00 + GST)Quick Overview:
- Product Name: 3S 11.1V 10A 18650 Lithium Battery Overcharge And Over-current Protection Board-Good Quality
- Three series of lithium battery protection board.
- Automatically cancel protection after protection conditions restore.
- Suitable for lithium battery pack of 11.1V, 12V, 12.6V.
- Quiescent current < 30uA, so power consumption is small.
- With the function of overcharge protection, over discharge protection, short circuit protection, over-current protection.
1S 12A 3.6V BMS Battery Protection Board for Li-ion Cell
SKU: AI2160 ₹49.32 (₹41.80 + GST)Quick Overveiw:
- Overcharge protection
- over-discharge protection
- short circuit protection
- overcurrent protection
- MOS: 6 MOS Transistor
3.7V Lithium Battery Protection Board for Polymer 18650 Bonding Pad (can Spot/Weld) 3A Overcurrent Value
SKU: AI0499 ₹12.51 (₹10.60 + GST)
XH-M603 Charging Control Module with LED Display
SKU: AI0564 ₹207.68 (₹176.00 + GST)Quick Overview:
- Model: XH-M603 / HW-632
- Input Voltage: DC 10–30V
- Display Precision: 0.1V
- Control Precision: 0.1V
- Output Type: Direct output
HX-2S-D01 2S 7.4V 18650 Lithium Battery Protection Board
SKU: AI4152Charging Voltage : 8.4V-9V
Charging Voltage Range per Cell : 4.25-4.35V±0.05V
Discharge Voltage Range : 2.5-3V±0.05V
Maximum Working Current : 8A
Working Temperature : -40~+50℃
3S 12V 25A 18650 Lithium Battery Protection Board
SKU: AI1045 ₹113.28 (₹96.00 + GST)Overcharge Voltage Range: 4.25-4.35V ± 0.05V
Over Discharge Voltage Range: 2.3-2.7V ± 0.05V
Operating Temperature: -40°C to +50°C
Storage Condition: -40°C to +80°C
Quiescent Current: Less than 30μA
Balance Current: Approximately 40-50mA
PCB BMS 6 Series 22V 18650 Lithium Battery Protection Board
SKU: AI3460 ₹107.38 (₹91.00 + GST)QUICK OVERVIEW:
- Model: 6 string 22V lithium battery protection board.
- Maximum operating current: Within15A.
- Charging current: Within 15A.
1S 3.7V 3A 2MOS BMS Li-ion 18650 Battery Protection Board
SKU: AI3457- Charging voltage: 3.7V
- Overcharge Detection Voltage: 4.25 ± 0.05V
- Overcharge release voltage: 4.23 ± 0.05V
- Over discharge detection voltage: 2.45 ± 0.1V
- Upper Limit Continuous Current: 5A
2S 5A 8.4V 18650 Lithium Battery Charger Board Protection Module
SKU: AI3439 ₹54.28 (₹46.00 + GST)QUICK OVERVIEW:
- Input Voltage: 8.4 – 9V.
- Overcharge Detection Voltage: 4.25-4.35V±0.05V.
- Over-Discharge Detection Voltage: 2.3-3.0V±0.05V.
- Maximum Working Current: 5A.
- Transient Current: 7A.
4 Series 40A 18650 Lithium Battery Protection Board 14.8V 16.8V with Balance for Drill Motor Lipo Cell Module
SKU: AI3445 ₹127.44 (₹108.00 + GST)The Successful start of the drill requires three 15C-20C power battery, or six 10C-15C power battery (ordinary 18650 cannot start the drill!!)
Strictly according to map wiring 0V, 4.2V, 8.4V, 12.6V, 16.8V, do not deliberately short circuit.
2S 3A Li-ion Lithium Battery 7.4V 8.4V 18650 Charger Protection Board Module
SKU: AI1051 ₹41.54 (₹35.20 + GST)Over-Discharge Detection Voltage: 2.3 ~ 3.0 ± 0.05V.
Maximum Working Current: 3A.
Transient Current: 5A.
Operating Temperature : -40 ~ +80 °C.
1S 3.7V 6A 4MOS BMS Li-ion 18650 Battery Protection Board
SKU: AI3348QUICK OVERVIEW:
- Model: 18650
- Product type: BMS Li-ion 18650
- Current: 10A
- Voltage: 3.7
- The high-precision voltage sensing circuit
- short circuit protection.
- Overcharge protection.
2S 20A 18650 Lithium Battery Protection Board
SKU: AI2954QUICK OVERVIEW:
- Over Charge Voltage Range: 4.25-4.35 V + 0.05 V
- Over Voltage Range: 2.5-3.0 V + 0.05 V
- Max. Operating Current: 13 A
- Max. Limiting Current: 20 A
- Charging Voltage: 8.4-9 V
1S 5A 18650 Lithium Battery Protection Board
SKU: AI3180 ₹37.05 (₹31.40 + GST)QUICK OVERVIEW:
- Small size designed for a four-cell battery pack.
- Over-charge/Over-discharge Protection.
- Pre-soldered Nickel Strip ready to mount on battery.
4S 10A 18650 Lithium Battery Protection Board
SKU: AI1053 ₹138.06 (₹117.00 + GST)This protection board is suitable for 4 series Li-ion cell.
Adopt a precision integrated circuit for fast and safe charging.
Support overcharge protection, over-discharge protection, and short circuit protection.
This product has gone through load and ageing test for quality assurance.
4 Series 14.8V 18650 Lithium Battery Equalization Board
SKU: AI3138QUICK OVERVIEW:
- Type: Voltage Regulator
- Supply Voltage:14.8V/16.8V
- Dissipation Power:18650 Lithium Battery Balanced Function Board
- Operating Temperature: Discharge Shunt balanced 4.2V 66mA
1S 3.7V 9A 6MOS BMS Li-ion 18650 Battery Protection Board
SKU: AI3459 ₹73.16 (₹62.00 + GST)QUICK OVERVIEW:
- model: 1S 3.7V 9A 6MOS
- Product: BMS
- Product type: Li-ion Battery BMS
- Current : 12A
- Capacity: 2500Mah
- Charging voltage: 4.2v
5S 100A LiFePO4 Battery Balance Charging BMS Battery Protection Board-white
SKU: AI3336QUICK OVERVIEW:
- Shortage protects recover mode: Offload release.
- Contact discharge current:80A
- Synopline discharge current:60A
- Charging current:60A
- Ampere balance (Current) : 60MA
- Current balance accuracy : 4.14-4.24V
4S 10A BMS For LFP With Balancing 12.8V
SKU: AI1056 ₹174.64 (₹148.00 + GST)
4 Series 30A 18650 Lithium Battery Protection Board 14.8V 16V with Cable
SKU: AI1057
Overcharge protection
Over-discharge protection function, short circuit protection function
Overcurrent protection function, band balance.
4S 5A BMS NMC18650 Lithium Battery Protection Board
SKU: AI1054- This protection board is suitable for 4 series Li-ion cell
- Adopt a precision integrated circuit for fast and safe charging
- This product has gone through load and ageing test for quality assurance
3S 10A Li-ion 18650 Charger Protection Board Module 10.8V 11.1V 12.6V
SKU: AI3443
- Charging Voltage: 12.6V-13V
- Overcharge Voltage Range: 4.25V-4.35V ± 0.05V
- Overpressure Voltage Range: 2.3V-3.0V ± 0.05V
- Upper Limit Operating Current: 5A-6A
4S High Current up to 30A Lithium Battery Protection Board Four Series of 14.8V 16.8V
SKU: AI3347 ₹114.46 (₹97.00 + GST)QUICK OVERVIEW:
- Overcharge detection voltage: 4.25 ± 0.025V
- Overcharge release voltage: 4.15 ± 0.05V
- Over-discharge detection voltage: 2.50 ± 0.08V
- Over-discharge termination voltage: 3 ± 0.1V
- Overcurrent: 20-30A
- Working current: 15A
HXYP-1S-5020 1S 3.7V Lithium Battery Protection Board
SKU: AI4150“HXYP-1S-5020 1S 3.7V Lithium Battery Protection Board,Solder Pad Affixed without Nickel Sheet
- Provide a full protection from dust, shock, scratches and bumps and other daily damage
- Completely fits and works
- Simple and easy, comfortable, easy to carry
1S 3.7V 2A 1MOS BMS Li-ion 18650 Battery Protection Board(Made In India)
SKU: AI8206 ₹11.78 (₹9.20 + GST)Quick Overview:
- Product Name: 1S 3.7V 2A 1MOS BMS Li-ion 18650 Battery Protection Board(Made In India)
- Model: Li-ion 18650
- Product: Li-ion BMS
- Charging voltage: 3.7V
- Charging current: 2A-9A
- Single-cell consumption of battery (self-consumption): ≤3uA
- Weight:5 gm
4S 15A 18650 Lithium Battery Protection Board
SKU: AI3183 ₹168.74 (₹143.00 + GST)Quick Overview
- Overcharging and Over Discharging Protection
- Short circuit protection: Yes
- Applicable assembly: Nominal 3.7V Batteries / 4 strings.
1S 3.7V 7.5A 5MOS BMS Li- ion 18650 Battery Protection Board
SKU: AI3349QUICK OVERVIEW:
- Over charge detection voltage : 4.25 + 0.05V
- Over charge release voltage : 4.23 + 0.05V
- discharge detection voltage : 2.45 + 0.1V
- Ceiling continuous current : 12A
- Overcurrent detection current : 7.5A
- Input Charging voltage : 3.7V
HOT DD30CRTA Car, Lead Acid Battery, Charger 12V Charging, Device 3A Current 1-, 10000AH UPS Solar, Power Module, （With Terminal）
SKU: AI2490 ₹588.82 (₹499.00 + GST)QUICK OVERVIEW:
- Power supply voltage: 15-28VDC(Recommended 16-25VDC)
- Over Charge Voltage is 14.8V
- Float Charge Voltage is 13.55V
- Maximum charge current: 3A
- Quiescent current: about 1.8mA
- High PWM Switching Frequency:300KHz
- Operating Ambient Temperature: -40℃ to +85℃
- Size: 66 x 20x 12mm
- Weight: 9g
3S 15A 18650 Lithium Battery Protection Board
SKU: AI3182- Overcharging and Over Discharging Protection
- Short circuit protection: Yes
- Applicable assembly: Nominal 3.7V Batteries / 3 strings.
3s 20A 18650 Lithium Battery Protection Board
SKU: AI3181- Overcharging and Over Discharging Protection
- Short circuit protection: Yes
- Applicable assembly: Nominal 4.5V Batteries / 3 strings.
3S 12.6V 25A 18650 Lithium Battery Protection Board with Balance （8MOS）
SKU: AI4153- Operating current: 0 – 25A.
- Instantaneous current: 35 – 40A.
- Storage condition: -40 – +80℃.
- Quiescent current: less than 30uA.
- Balance current: about 40 – 50mA.
- Effective life: more than 30000 hours.
TP4056/TC4056 1A Li-Ion Lithium Battery Charging Module – Micro B USB
SKU: AI0300 ₹12.15 (₹10.30 + GST)Quick Overview
- Input voltage : 4.5V ~ 5.5V
- Input Interface: Micro USB port
- Charging method: linear charge
- A full charge voltage: 4.2V
- Power: 4.2 w
- Charging accuracy: 1.5%
- Operating Temperature: -10 to +85ºC
- Charging indicator: LED indicators for charging and full charging.
TP4056 1A Li-ion Lithium Battery Charging Module – Mini USB
SKU: AI0076 ₹13.57 (₹11.50 + GST)Input voltage : 4.5V ~ 5.5V.
Input Interface: Mini USB port.
Charging method: linear charge.
A full charge voltage: 4.2V.
Power: 4.2 w.
Charging accuracy: 1.5%.
Operating Temperature: -10 to +85ºC
Charging indicator: Blue LED charging, Red LED full
3 Series 20A 18650 Lithium Battery Protection Board 11.1V 12V 12.6V
SKU: AI3444 ₹37.29 (₹31.60 + GST)QUICK OVERVIEW:
- 3S 11.1V 12.6V 20A 18650 lithium battery protection board (comes with recovery function-AUTO Recovery).
- Application: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650.26650, a polymer lithium battery).
- Continuous discharge current (upper limit): 20A (if the cooling environment is not good, please reduce the load current use).
- Continuous charge current (upper limit): 20A.
- Suitable for the drills with starting current below 80A, power below 135W
White 4S 100A LiFePO4 Lithium Battery Protection Balance Charging BMS Protection PCB Board
SKU: AI3463 ₹248.98 (₹211.00 + GST)QUICK OVERIVEW:
- Charging current: 60A
- Balance function: yes
- Ampere balance (Current): 50MA
- Voltage alance accuracy: 3.355-3.455 V
3 Series 40A 18650 Lithium Battery Protection Board 11.1V 12.6V with Balance for Drill Motor Lipo Cell Module
SKU: AI0500 ₹103.84 (₹88.00 + GST)3S 11.1V 12.6V 40A 18650 lithium battery protection board (comes with recovery function-AUTO Recovery)
Application: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650.26650, a polymer lithium battery)
Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)
Continuous charge current (upper limit): 20A
HX-2S-A2 Circular 2S 8.4V BMS 18650 Lithium Battery Protection Plate
SKU: AI2083 ₹41.42 (₹35.10 + GST)- Overcharge voltage range: 4.25-4.35v ± 0.05v
- Charging voltage: 8.4V-9V
- Upper limit operating current: 5A
- Upper limit instantaneous current: 7A
- Quiescent current: less than 10uA
- Internal resistance: less than 300mΩ
6S 20A Li-ion Lithium Battery 24V 18650 Charger Protection Board Module
SKU: AI2167 ₹207.68 (₹176.00 + GST)Charging voltage: 25.5V
Charging current: 20A (MAX)
Overcharge detection voltage: 4.28 ± 0.05V
Overcharge protection delay: 0.1S
Overcharge release voltage: 4.08 ± 0.05V
Over discharge detection voltage: 2.55 ± 0.08V
Overdischarge detection delay: 0.1S
The overdischarge release voltage: 2.9 ± 0.1V
4S 20A 18650 Lithium Battery Protection Board
SKU: AI1055 ₹127.44 (₹108.00 + GST)
Model: HXYP-4S-BMD1
Small size designed for a four-cell battery pack.
Simple wiring and circuit
Over-charge Protection
Continuous Current: 10A
Max Pick Current: 20A
3S 100A LiFePO4 Battery Balance Charging BMS Protection PCB Board-White
SKU: AI3335 ₹238.36 (₹202.00 + GST)Model: BMC3451 BHDC-T28A
Charging Current: 60A
Current Balance: Yes
Ampere balance (Current): 60MA
Voltage balance accuracy: 4.14-4.24V
1s18650 3.7V lithium battery protection plate 6 MOS
SKU: AI3440 ₹43.19 (₹36.60 + GST)Over charge detection voltage : 4.25 + 0.05V
Over charge release voltage : 4.23 + 0.05V
discharge detection voltage : 2.45 + 0.1V
Ceiling continuous current : 12A
Overcurrent detection current : 15A
Input Charging voltage : 4.2V
Product size : 35*7.4*2.2MM
IC components : DW01+8205A
1S 3.7V 2A 1MOS BMS Li-ion 18650 Battery Protection Board
SKU: AI3456 ₹17.82 (₹15.10 + GST)Model: Li-ion 18650
Product: Li-ion BMS
Charging voltage: 3.7V
Charging current: 2A-9A
Single-cell consumption of battery (self-consumption): ≤3uA
Weight:5 gm
5S 15A 18650 Li-ion Lithium Battery BMS Charger Protection Board for 18V 21V Battery
SKU: AI3446 ₹231.14 (₹195.88 + GST)
XH-M240 Battery Capacity and Discharge Energy Testing Meter For 18650 Lithium-Ion Battery
SKU: AI1106 ₹335.12 (₹284.00 + GST)
Model: XH-M240
Display accuracy: 0.1
Measurement accuracy: 1mAH
Power supply: DC 5V-12V
Standby current: 5-7mA
4S 30A Battery Management System ( BMS ) – LifePO4
SKU: AI7076 ₹217.12 (₹184.00 + GST)4S 30A Battery Management System ( BMS ) – LifePO4:
The 4S 30A BMS for Battery of LifePO4 chemistry is a high quality, reliable BMS. It comes in use with LifePO4 batteries. Its a high current protection circuit board but it has no balancing circuit. It has continuous discharge current of 30A (Max). The BMS provides overcharge protection, over discharge protection, and over current detection.
This 4S 30A BMS module is usable with LifePO4 Battery with 4S (4 Series) Design.
- 4S 30A BMS for LifePO4 Battery Pack
- Charging Current: 20A
- Charging Voltage: 14.8V to 18V
- Continuous Discharge Current: 30A
1S 3.7V 4.5A 3MOS BMS Li-ion 18650 Battery Protection Board
SKU: AI3458 ₹47.08 (₹39.90 + GST)- Over voltage: 4.25 ± 0.05v
- Over-discharge voltage: 4.23 ± 0.05v
- Over-voltage: 2.54 ± 0.1V
- Maximum continuous electricity charge/discharge current: 4.5A
- Maximum discharge current: 5A
5S 15A 18650 Lithium Battery Protection Board
SKU: AI2955 ₹168.74 (₹143.00 + GST)QUICK OVERVIEW:
- Continuous discharge current: 15A(max)
- Instantaneous discharge current: 25A
- Charge voltage: 21V
- Charging current: 15A(max)
- Overcharge Protect:
- Over-charge detect: 4.28±0.05V
- Protect delay: 0.5s
- Over-charge release: 4.28±0.05V
- Working current: ≤30uA
- Sleep current: (when over-charge)≤10uA
- Working Temperature Range: -30-+80
2S Li-Ion BMS HX-2S-JH10 Module
SKU: AI6596 ₹94.40 (₹80.00 + GST)2S Li-Ion BMS HX-2S-JH10 Module: Lithium Ion Protection Board BMS HX-2S-JH10 Module
HX-2S-JH10 2S Lithium ion BMS Module This module is perfect for making a 2S battery pack using the 18650 Li-ion battery. HX-2S-JH10 is a 2 Series (2S) Lithium Ion Battery Management System (BMS) Module with an 8an Ampere continuous Li-ion protection board.
HOT DD30CRTA Car Lead Acid Battery Charger 12V Charging Device 3A Current 1-10000AH UPS Solar Power Module （Without Terminal）
SKU: AI3530 ₹531.00 (₹450.00 + GST)QUICK OVERVIEW:
- Car battery charging
- Solar battery charging
- Loudspeaker
- Lead-Acid Battery Charger
- Electric Bicycle Charger
- UPS
- Portable Industrial and Medical Equipment
- Standalone Battery Chargers
Free Shipping
On orders above ₹999
COD Available
Min. order ₹250 for COD
GST Invoice
Available on all orders
1,50,000+ Orders
Delivered across India
Expert Support
Toll Free: 1800 209 0998
Product categories
- Show All Categories
- 3D Printers and Parts (379)
- Batteries, Chargers and Accessories (811)
- Clearance Sale (0)
- Development Boards (438)
- DIY Learning and Robot Kits (117)
- Drone Parts (1364)
- EBike parts (140)
- Electronic Components (783)
- Electronic Modules and Displays (1201)
- FPV Freestyle Mid/High KV Drone Motors (0)
- IoT and Wireless (544)
- Mechanical Parts and Workbench Tools (241)
- Motors & Drivers & Pumps & Actuators (583)
- Sensor Modules (639)
- Batteries, Chargers and Accessories (811)
- Battery Chargers (130)
- Battery Connector (126)
- Battery Harness (83)
- Battery Pack Accessories & Holders (144)
- Battery Protection Board (59)
- Coin Cell Battery (2)
- LiPo Battery (86)
- Lithium-Ion Battery (16)
- Non-Rechargeable Battery (3)
- Power Adapter and Cable (21)
- Wires and Cables (150)