TTP224 4-way Capacitive Touch Switch Module
SKU: AI0313Quick Overview
- Onboard TTP224 capacitive touch sensor IC 4 keys
- 4 board-level status indicator
- Working voltage: 2.4V-5.5V
- Advanced Pins breakout, so that the output mode and working mode selectable.
- Low power selection
AMS1117-3.3 LDO 800MA DC 5V to 3.3V Step-Down Power Supply Module
SKU: AI0673 ₹16.17 (₹13.70 + GST)Quick Overview
- Product Name: AMS1117-3.3 LDO 800MA DC 5V to 3.3V Step-Down Power Supply Module
- Input Voltage: 4.5V to 15V
- Output Voltage: 3.3V to 5V
- Output Current: 800mA
- Onboard AMS1117 chip.
- Onboard power indicator to indicate power is turned on: Red LED.
- Output voltage interface, connection to facilitate the experimental.
- Small Compact Size, 3Pin Type, Breadboard Friendly.
2.4G NRF24L01+PA+LNA Wireless Module with Antenna
SKU: AI0178 ₹231.28 (₹196.00 + GST)- Voltage: 3-3.6V (recommended 3.3V) V.
- Maximum output power: +20dBm.
- Power-down mode current: 4.2uA.
- Operating Range: 1Km
- Antenna Gain (peak): 2Dbi.
- 2MB rate (Open area): 520m.
- 1MB rate (Open area): 750m.
- 250Kb rate (Open area): 1100m.
- It uses 2.4GHz global open ISM band, with license free.
- SPI interface facilitates the communication with MCU I/O port.
0 to 600 °C Surface Thermocouple K Type High Temperature Resistance Probe
SKU: AI2097 ₹33.75 (₹28.60 + GST)- Cable length: 1M
- Measuring range: 0 to 600 °C
- Color: Yellow
- Accuracy : ±2.5%/0.75%
- Material: Plastic
- Interface Type: flat plug-in
- Interface Length: 12.5MM
MQ-6 Liquefied Petroleum Isobutane Propane Gas Sensor Module
SKU: AI0105 ₹114.46 (₹97.00 + GST)Quick Overview
- Operating Voltage: 5V DC
- Indication of the signal output
- Dual signal output (analog output, and TTL level output)
- 0 ~ 5V analog output voltage, the higher the concentration, the higher the voltage
- High sensitivity to hydrogen
- Can be resistant to ethanol steam, LPG (petroleum), smoke interference
- Has a long life and reliable stability
- Fast response and recovery characteristics
NE555 Delay Timer Switch Adjustable 5V Relay Module
SKU: AI0170 ₹102.66 (₹87.00 + GST)
NE555 Delay Timer Switch Adjustable 5V Relay Module Introducing the NE555 Delay Timer Switch Adjustable 5V Relay Module, your go-to...
Add to cart
Add to Compare
CJMCU 64 Bit 8×8 RGB LED Driver Development Board
SKU: AI3435 ₹135.70 (₹115.00 + GST)QUICK OVERVIEW:
- Dimensions : 70*65*3 mm
- Supply Voltage : 5 VDC.
- Interface : IO .
- 8 x 8 = 64 RGB.
- Chip : WS2812b.
CP2102 Micro USB to UART TTL Module 6Pin Serial Converter UART STC Replace FT232
SKU: AI0727 ₹147.50 (₹125.00 + GST)Quick Overview
- 5P – A type USB USB specification 2.0 compliant with full-speed 12Mbps.
- Standard USB type A male and TTL 5pin connector.
- 5pins for 3.3V, TXD, RXD, GND & 5V All handshaking and modem interface signals
- Baud rates: 300 bps to 1.5 Mbps.
- Byte receives buffer; 640 bytes transmit buffer.
ESP8266 I/O Lead Out Adapter Plate Expansion Module for ESP-07 ESP-12E
SKU: AI0525Quick Overview
- ESP8266 I/O Lead Out Adapter Plate Expansion Module
- It has a reserved land pattern for a 3.3V regulator.
- Pinouts in black colour are on the upper layer.
LM6UU 6 MM Linear Motion Bearing
SKU: AI2122QUICK OVERVIEW:
- Color: silver
- Model: LM6UU
- Shaft ID: 6mm
- Outer Diameter: 12mm
- size: 19 x 12 (LxW) mm.
- Outer Casing: Chromium Steel
- Ball Circuits: 4
SIM800L V2 5V Wireless GSM GPRS MODULE Quad-Band with Antenna
SKU: AI0943 ₹455.48 (₹386.00 + GST)Network support: Quad-Band 850/900/1800/1900 MHz – works on GSM networks in all countries across the world.
TTL serial interface compatible with 3.3V and 5V MCU
the small size is suitable for all kinds of sleeve belt type and embedded.
Power supply: 5 -20 V.
Power Interface: 2.54 mm Pin header or MICRO USB interface.
5A 3 Pin SPDT(ON–OFF–ON) Toggle Switch
SKU: AI5869 ₹39.65 (₹33.60 + GST)Quick Overview:
- Product Name: 5A 3 Pin SPDT(ON–OFF–ON) Toggle Switch.
- 5A 3-Pin SPDT Toggle Switch
- ON–OFF–ON configuration
- ON positions on both sides
- Center position is OFF
- Suitable for circuit switching and control
Piezoelectric Sensor Transducer 35mm Dia (Pack of 3)
SKU: AI0131 ₹55.46 (₹47.00 + GST)Quick Overview
- Resonance Frequency: 4.6 Khz +/- 0.5 Khz
- Resonance Impedance: 200 Ohms
- Capacitance: 20nF +/- 30% at 1 Khz
- Operating Temperature -20 C +70 C
- Storage Temperature -30 C+80 C
- Metal Material Brass
GX12 12MM: 3 PIN- set of male and female
SKU: AI0935
Diameter :12mm
Environmental conditions
Ambient temperature: -50 ~ +70 C
Relative humidity: up to 98% at +40 C
36W 3A Short Distance IR Hand Sweep ON-OFF Sensor Module
SKU: AI0666Operating voltage: 12vDC
Output Voltage: 12 V
Output type: Double output
Detection range: adjustable 10-80 MM
Max Power Load: 36 W
Delayed off time: none
Field of application: DC, constant pressure
Load current: 3A optional
Standby current: 10mA
30A BLDC ESC- Brushless Electronic Speed Controller
SKU: AI0193 ₹379.05 (₹361.00 + GST)Quick Overview
- Constant Current: 30A (Max 40A<10s).
- BEC: 5V 2A.
- Input Voltage: 11.1 ~ 11.7 V.
- Li-Po battery: 2S ~ 3S.
- Ni-MH 4-10 CELLS Auto Detect.
XL7015 DC-DC Step Down Adjustable Power Supply Buck Module
SKU: AI2176 ₹86.14 (₹73.00 + GST)Quick review :
- Input voltage range: 5V-80V DC
- Output voltage range: 1.5V-20V DC adjustable.
- Output current: 0-0.8A.
- High efficiency up to 90%
- Built-in thermal shutdown function
- Built-in current limit function
- Built output short protection function
315MHz RF Transmitter Receiver Module
SKU: AI0100Operating voltage: 5V.
Quiescent Current: 4mA.
Receiving frequency: 315MHz.
Receiver sensitivity: -105 dB.
Communication Distance (m): 20 ~ 200 meter.
18650 5V 2.4A Lithium, Battery Digital Display, Charging Module Dual, USB Output Band, Display Booster, Mmodule
SKU: AI3360- Input:5V 2.1A
- Output:5V/1A or 5V/2.4A(Quick Charge )
- Protect Function: Overcharging; Overdischarging and overload protection
Solderless 400 pin breadboard – Normal Quality – Without Packing
SKU: AI2100Quick Review
- Tie Points: 400
- Double Strip: 1 (Total 300 tie points)
- Power Lanes: 2 (Total 100 tie points in power lanes)
- Hole Spacing: Standard 2.54mm
- Compatibility: Suitable for Arduino shield prototyping and testing
- Material: Plastic housing with metal contact clips
TSOP1738 IR Receiver – Infrared Receiver
SKU: AI0095 ₹32.57 (₹27.60 + GST)Quick Overview
- Supply Voltage: 5 V
- Power consumption: 0.4 to 1.0 mA
- Min. Ee irradiation: 0.35 mW/m2 typ.
- Angle of detection: 90
- Dimensions of the casing (mm): 12.5 x 10 x Thickness 5.8
- Temperature range: -25 C to +85 C
Mini ENC28J60 Ethernet LAN Network Module
SKU: AI0360 ₹497.96 (₹422.00 + GST)Quick Overview:
- Fully Compatible with 10/100/1000Base-T Networks
- Integrated MAC and 10Base-T PHY
- Supports One 10Base-T Port with Automatic Polarity Detection and Correction
- Supports Full and Half-Duplex modes
- Programmable Automatic Retransmit on Collision
- Programmable Automatic Rejection of Erroneous Packets
- SPI Interface with Clock Speeds Up to 20 MHz
- For Arduino, SPI, AVR, PIC, LPC, STM32
ATMEGA16U2 Arduino Mega 2560 R3 Improved Version CH340G Board
SKU: AI0024 ₹1,124.54 (₹953.00 + GST)Quick Overview:
- Microcontroller CH340
- Operating Voltage 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) 6-20V
- Digital I/O Pins 54 (of which 15 provide PWM output)
- Analog Input Pins 16
- DC Current per I/O Pin 40 mA
- Dimensions : 111 x 54 x 12 (LxWxH) mm.
PL2303 TA Download Cable USB to TTL RS232 Module USB to Serial
SKU: AI0613 ₹92.04 (₹78.00 + GST)Quick Overview
- Built-in TTL COM PC-PL2303HX Chip.
- Standard USB type and TTL 4 pin connector
- Simple and Easy way to give USB support to your designs
- Available for Linux, Mac, WinCE, and Windows (XP, 7), Win 8
- Cable Length: 1M
- Net Weight: 30gm
USB to RS485 TTL Serial Converter Adapter FT232
SKU: AI0326Quick Overview:
- Baud rate: 300 – 9216000bps, automatically detecting the serial signal data rate
- Load capacity: support multipoint, each converter allows RS485 interface device to connect 32
- Interface Protection: TVS tube protection, USB self-recovery protection
- Support Windows98/ME/2000/XP/WIN7/Vista, Linux, Mac
- It can be up to 32 devices on the bus.
MT8870 DTMF Audio/Speech Decoding Telephone Module
SKU: AI0316Quick Overview
- Working voltage: 5V
- Power Consumption: 500MW(MAX)r: 500 MW (MAX)
- On-board voice input interface
- On-board LED, it is very convenient to check the output state.
- Onboard 5 x LED indicators for easy viewing output state
- Operating Temperature: -40-+85 °C
- IO Drive: Current Maximum 10mA.
- PCB Size : 25.4×25.4MM
Tower Pro MG995 Plastic Gear Servo Motor (180° Rotation)
SKU: AI0395 ₹214.76 (₹182.00 + GST)Model: MG995
Weight: 55 gm
Operating voltage: 4.8V~ 7.2V
Servo Plug: JR
Stall torque @4.8V: 10 kg-cm
Stall torque @6.6V: 12 kg-cm
16AWG extrasoft Silicone Wire (1m)
SKU: AI4688 ₹55.46 (₹47.00 + GST)- Rated Voltage: 600V
- Rated Temperature: -60°C~+200°C
- Conductor: Tinned Copper
- Conductor construction: 252/0.08
- Insulation: Silicone Rubber
- Length: 1 m
- wire size:16AWG
- color: red
Note: Wire will also made available as per requirement
Original DHT22 Digital Temperature and Humidity Sensor
SKU: AI0087 ₹522.74 (₹443.00 + GST)Quick Overview
- Temperature Range: -40°C to +80°C (±0.5°C accuracy)
- Humidity Range: 0% to 100% RH (±2–5% RH accuracy)
- Operating Voltage: 3.3V to 6V
- Update Rate: Every 2 seconds
- Interface: Single-wire digital signal
- Built-in ADC: Provides calibrated digital output
- Compact Size: Easy to integrate in various projects
- Applications: IoT, weather monitoring, smart homes
XH-M603 Charging Control Module with LED Display
SKU: AI0564 ₹208.86 (₹177.00 + GST)Quick Overview:
- Model: XH-M603 / HW-632
- Input Voltage: DC 10–30V
- Display Precision: 0.1V
- Control Precision: 0.1V
- Output Type: Direct output
N20-6V-600 Rpm Micro Metal Gear Motor
SKU: AI3219 ₹214.76 (₹182.00 + GST)QUICK OVERVIEW:
- This is a DC Mini Metal Gear Motor, ideal for making robots
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
Black 2 X CR2032, Button Battery Case, with Wire and Toggle, Switch
SKU: AI2977 ₹40.42 (₹34.25 + GST)
QUICK OVERVIEW:
- Product Name: 6V Battery Case With On/Off Switch
- Type: Wire Lead Type
- Fit Battery Model: CR2032
- Available Battery Quantity: 2
- Material: Plastic, Metal
- Outside Diameter: 32.5mm
DC 3-5V X9C103S Digital Potentiometer Board Module for Arduino
SKU: AI0654 ₹210.04 (₹178.00 + GST)
Supply voltage: 3V-5V
Chip: X9C103S
Dimensions : 28 x 14 x 4 (LxWxH) mm.
10K span potentiometer.
Add to cart
Add to Compare
HTU21D Temperature and Humidity Sensor Module (HW-220 )
SKU: AI0574 ₹139.24 (₹118.00 + GST)
Power supply: 1.5 ~ 3.6V.
Humidity measure range: 0-100%RH.
Temperature measure range: -40 ~ +105 °C.
Max. power consumption: 2.7 µW.
Communication: I2C.
Add to cart
Add to Compare
HC-12 Wireless Transceiver Module – SI4438 2A Radio Chip -Original
SKU: AI0822- Frequency range = 119–1050 MHz
- Receive sensitivity = –126 dBm
- Serial TTL (RX, TX, GND) interface
- Modulation (G)FSK, 4(G)FSK, (G)MSK, OOK
HC-SR505 Mini Infrared PIR Motion Detector Sensor Module
SKU: AI0148 ₹93.22 (₹79.00 + GST)
Model: HC-SR505
Operating Voltage Range: DC4.5-20V
Average Current Consumption (mA): 0.06
Distance Measuring Range: 3 meters
Dimensions (mm) LxWxH: 10 x 23 x 5
Weight (gm): 10
Delay time: Default 8S + -30% (can be customized)
Working Temperature Range: -20°C ~ 80°C
Sensor Lens Diameter: 10mm
Induction angle: <100-degree cone angle
Add to cart
Add to Compare
APDS9960 RGB Gesture Sensor Detection I2C Breakout Module for Arduino
SKU: AI0307 ₹230.10 (₹195.00 + GST)Quick Overview
- Operational Voltage: 3.3V.
- Ambient Light & RGB Color Sensing.
- Proximity Sensing.
- Gesture Detection.
- Operating Range: 4-8in (10-20cm).
- I2C Interface (I2C Address: 0x39).
Core Board STM8S103F3P6 STM8 Development Board Minimum System Board
SKU: AI0555 ₹103.84 (₹88.00 + GST)Quick Overview:
- Chipboard: STM32F103C8T6
- Onboard SWIM interface and reset button
- Power options: Micro USB cable or 2.54mm pin header with input voltage 4.5V–15V
- Indicators: Power light and Demo indicator light
- Pin access: Leads all pins with detailed labeling
- Supports SWIM debug mode
MQ-5 Methane LPG Liquid Propane Gas Sensor Module
SKU: AI0161 ₹102.66 (₹87.00 + GST)Quick Overview
- Operating Voltage: 5V DC
- High sensitivity to LPG, natural gas, town gas.
- Small sensitivity to alcohol, smoke.
- Stable and long life.
- Simple drive circuit.
- Fast response
ANTENNA LORA 433MHZ
SKU: AI0938Center Frequency: 433 MHz
Wavelength: ¼-wave
VSWR: < 2.0 typical at center
Peak Gain: 3.6dBi
Impedance: 50-ohms
ISD1820 Recording Module Voice Board with Mic
SKU: AI0127 ₹154.58 (₹131.00 + GST)Quick Overview
- The main chip: ISD1820.
- Operating Voltage: DC 3V-5V.
- Loudspeaker: 8 ohms, 0.5W.
- An easy to use 10 seconds of voice recording.
- High-quality, natural voice restored.
- Can be used as a propaganda module.
- With looping, jog playback, single pass play function.
SL2.1A USB2.0 HIGH SPEED 4-PORT HUB CONTROLLER SMD SOP16
SKU: AI6081 ₹21.36 (₹18.10 + GST)- Perfect support for USB2.0 high speed (480MHz),
- USB2.0 full speed (12MHz)
- low speed mode (1.5MHz)
- Integrated 12M crystal oscillator
- Integrated 12MHz-to-480MHz PPL(Phase Lock Loop)
DC 12V-36V 500W Brushless Motor Controller Hall Balanced Car Driver Board
SKU: AI0179 ₹1,178.82 (₹999.00 + GST)Operating Voltage: DC12-36V
Operating Current: <=15A
Drive Power: <=500W
Speed Voltage: 0.1V-5V
Operating Temperature: -40~85 degrees Celsius
Humidity: <=90%RH
Stall Protection: Yes
1 Channel Relay Module, 30A with Optocoupler, Isolation 12V Supports, High and Low Triger
SKU: AI2962
QUICK OVERVIEW
- Channel: 1 channel
- Relay Voltage: 12V
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
10mm 100ft High Temperature Heat Resistant Polyimide Koptan Tape Hot
SKU: AI3513Width: 10 mm
Length: About 33m.
Type: Polyimide Tape.
Heat Resistance: 200℃.
Thickness Tolerance: ±10% .
One-side Self-adhesive.
ATmega328P-U Microcontroller
SKU: AI0749 ₹318.60 (₹270.00 + GST)28-Pins in a Dual In-Line Packaging (2×14 pins)
Capabilities: SPI, I2C, USART, PWM
2.7V – 5.5V Input Voltage Range
1µA – 1.5mA Power Consumption (3V)
10-bit Analog-to-Digital Converter (8-channels)
Interrupt Capabilities (2-channel)
32KB of Flash Memory for Programming
SYD1230 6mm 650nm 5mW Red Line Laser Module
SKU: AI7231 ₹173.46 (₹147.00 + GST)Quick Overview
- Laser Output Type: Red LINE Laser
- Weight: 15 gm.
- Wavelength: 650nm
- Voltage: 3~6V
- Output Power: Min 2.5mW, Typical 3.0mW, Max 5.0mW
- Working current: Min 10mA, Typical 20mA, Max 25mA
- Working voltage: Min 2.3VDC, Typical 4.5VDC, Max 8.0VDC
SC8UU 8 mm Linear Ball Bearing Slide Unit CNC 3D Printer
SKU: AI2193 ₹90.86 (₹77.00 + GST)QUICK OVERVIEW:
- Product Name: Linear Bearing
- Model: SC8UU
- Material: Metal, Rubber
- ID: 8mm.
AHT21B Temperature and Humidity Sensor Temperature
SKU: AI0739 ₹116.82 (₹99.00 + GST)Quick Overview
- Supply voltage: 2.2 – 5.5V
- Scope of Work Temperature: -40~+80°C; Humidity: 0~100%RH
- Fully calibrated and processed digital output, I²C protocol
- Wide voltage support 2.2 to 5.5V DC
- Excellent long-term stability
26AWG 30 Core 3 Way Twist Servo Extension Cable JR Futaba Twisted Wire (1m)
SKU: AI4540 ₹28.35 (₹27.00 + GST)
26AWG 30 Core 3P Twist Servo Extension Cable
Color: Black Red White
Wire Gauge: 26AWG
Cores of Copper Wire: 30 cores
length -1m
Note: Wire will also made available as per requirement
Add to cart
Add to Compare
DB9 RS232/485 9pin Terminal Male Screw with Shell,and Screw
SKU: AI3534
DB9 RS232 D-SUB Male Adapter 9-pin Port Adapter to Terminal Connector Signal Module
Suitable for variety of pin connections required to use serial communications industrial control products
No need solder! It is convenient
DB9 male adapter with screw
Piezo Buzzer 27mm with Cable – Pack of 3
SKU: AI2568 ₹27.26 (₹23.10 + GST)
QUICK O VERVIEW:
- Sound pressure level: 85DB 10cm
- The input voltage: 30vp-p max
- Operating Temperature: -20~70
- Clear sound
- Ultra-thin and lightweight
- Low power consumption for voltage type
43mm Round Small Single Test Hook Clip Test Probe Red
SKU: AI2113
Product: Test Hook Clip Test Probe
Color: Red
Total Length: 43mm (Approx. 1.7 inches)
Overall Length: Approx. 4.2 cm
Add to cart
Add to Compare
Optical Endstop Photoelectric Light Control Optical Limit Switch for 3D Printer
SKU: AI2866 ₹76.70 (₹65.00 + GST)QUICK OVERVIEW:
- Increased reliability
- Increased precision
- Dimensions : 33 x 11 x 10 mm.
- Weight: 10 gm.
- Optical Endstop Switches help to protect your 3D printer or machine from moving past its intended range and damaging itself.
Testing Connector Alligator Clip Length 28mm NC101 Red
SKU: AI4015 ₹3.92 (₹3.32 + GST)
Alligator Clip Length (without silicone cover): approx 28mm
Housing: Insulating paste resin
Insulating Material: Silicon
Withstand voltage: 300V~5A; Rated current: 10A
The thickness of clip: about 0.5mm; Opening range of clip: 10mm
Small alligator clip: except the length of the rubber sleeve is 2.8CM, the width of the clip is 4MM crocodile clip + thicken protective insulation sleeve 
P31 Small Float Level Control Switch Plastic Float Switch
SKU: AI1193
Contact Rating: 10 W.
Switching Voltage: 220 V.
Switching Current: 0.5 A.
Breakdown Voltage: 220 VDC.
Carry Current: 1 A.
Contact Resistance: 100 mΩ.
Add to cart
Add to Compare
TP5000 3.6V/4.2V 1A Lithium Battery Charger Module
SKU: AI1170 ₹75.52 (₹64.00 + GST)
Single Battery Charger Module
Programable Charge Curren Form 0.1A to 2A
Programable Precharge Current Form 10% to 100%
Based on Tp5000 Battery Charger IC
3 Pin NTC Thermistor Temperature Sensor Module
SKU: AI0495 ₹33.04 (₹28.00 + GST)QUICK OVERVIEW
- Adopt the NTC thermistor sensor, sensitivity is good
- The comparator output, signal clean, good waveform, driving ability is strong, for more than 15 ma.
- With potentiometer to adjust the temperature detection threshold
- Working voltage: 3.3 V to 5 V
- Output form: digital switch output (0 and 1)
- It has a fixed bolt hole, convenient installation
T8 Anti-backlash Spring Loaded Nut For CNC 8mm Threaded Rod Lead Screw
SKU: AI1412- Inner Diameter Size: 8 mm.
- Color: Brass.
- Material: Brass.
- Weight: 25 gm.
- Ideal for 8mm 4 Start Threaded Lead Screw.
JQ6500 Voice Module MP3 Module MCU Serial Port Control Broadcast one-on-one 5 Way Control Music IC 16Mbit
SKU: AI0657 ₹231.28 (₹196.00 + GST)Quick Overview:
- Support all bit rate 11172-3 and ISO13813-3 layer3 audio decoding
- Sample rate support (kHz): 8 / 11.025 / 12 / 16 / 22.05 / 24 / 32 / 44.1 / 48
- Support Normal, Jazz, Classical, Pop, Rock and other sound effects
- UART interface: standard serial port, TTL level, baud rate can be set
- Input voltage: 3.2V–5V (best 4.2V)
- Rated current: 20mA
50cm 60core JR Male to Futaba Female servo Extension Wire with hook
SKU: AI4512 ₹55.46 (₹47.00 + GST)- Product Name: 50cm 60core JR Male to Futaba Female servo Extension Wire with hook
- Plug Type: JR Male To futaba female Servo Extension Wire.
- Cable Length: 50 cm
- There is a 3-pin connector on both ends.
- It fits for Futaba female and JR male
- It is useful for RC Car, plane, helicopter, and drone servo connection or receiver connection.
A2212 10T 13T 1400KV Brushless Motor for Drone (Soldered Connector)
SKU: AI0197 ₹372.88 (₹316.00 + GST)Quick Overview
- Model: A2212/10T/13T
- Motor KV: 1400
- Max. Efficiency Current: 6-12A
- No Load Current: 0.7A @10V
- Current Capacity: 16A/60S
- LiPO Batteries: 2S-3S
IRF 9540 MOSFET IC DIP-3 Package
SKU: AI1387IC Name: IRF 9540
Package/Case: DIP-3
Cleaning Sponge Cleaner for Enduring Electric Welding Soldering 3.5*5CM Iron (Pack of 5)
SKU: AI4068Material: Sponge
Color : Yellow
Size: 5cm*3.5cm*1mm
3 X 6 18650 Battery Holder with 18.5MM, Bore Diameter
SKU: AI3111
QUICK OVERVIEW:
- Model: 18650 radiating battery spacer.
- Material: ABS/PC (Remarkable Flame Retardant Plastic).
- Bore Diameter: 18.5mm
- Combined them into many different sizes and shapes of the battery pack.
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
220uH 2.4A High Current Toroidal DIP Inductor
SKU: AI2181 ₹22.42 (₹19.00 + GST)Quick reveiw :
- Type: Toroidal
- Material: Core Ferrite
- Inductance: 220µH
- Tolerance: ±20%
- Current Rating (Amps): 2.4A
- Shielding: Unshielded
- Operating Temperature: -40°C ~ 105°C
- Mounting Type: Through-Hole
- Package/Case: Radial, Vertical (Open)
- Dimensions (D x W): (14mm x 7.45mm)
PCB Mounted Passive Buzzer Module
SKU: AI0651 ₹21.36 (₹18.10 + GST)Quick Overview:
- Operating Voltage: 1.5 ~ 15V DC
- Working Current: Less than 25mA
- Tone Generation Range: 1.5 ~ 2.5 kHz
- Dimensions (L x W x H): 19 x 15 x 10 mm
Capacitive Soil Moisture Sensor
SKU: AI0562 ₹57.82 (₹49.00 + GST)Operating Voltage: 3.3 ~ 5.5 VDC.
Operating Current: 5mA.
Interface: PH2.54-3P.
Dimensions mm(LxWxH): 98 x 23 x 4.
Supports 3-Pin Gravity Sensor interface
Analog output.
Weight (gm): 15.
170 pts Mini Breadboard SYB-170 Black
SKU: AI2347QUICK OVERVIEW:
- Plug-n-play.
- Easy to use.
- Components are easily interconnected using 20-28 AWG wire
- 2.54 mm hole spacing
- ABS plastic material
IRF5305 MOSFET – 55V 31A P-Channel HEXFET Power MOSFET TO-220 Package
SKU: AI1525 ₹28.56 (₹24.20 + GST)MOSFET Type: P-Channel
Package Type: TO-220
Voltage Rating (Vds): 55V
Current Rating (Id): 31A
Technology: HEXFET
Dynamic dv/dt Rating: Yes
Switching Speed: Fast
Avalanche Rating: Fully rated
AVR ISP 10 Pin to 6 Pin Adapter Board
SKU: AI0705Quick Overview
- Made of high-quality material, practical and durable
- No. of Pinon USBASP side: 10.
- No. of Pinon Device under programming side: 6.
- Connector type on USBASP side: Male.
- Connector type on Device under programming side: Female.
- Header Pin Pitch: 2.54mm (0.1in).
- Pin Numbers Text: Yes on Top and Bottom sides of every pin.
Black PBS-11B 12MM 2PIN Momentary Self- Reset Round Plastic Push Button Switch
SKU: AI3398 ₹13.33 (₹11.30 + GST)Self-locking/Latching Self-reset
Good electrical conductivity
This is Momentary type push-button switch
Easy to use
Light Weight
Function: Momentary
AT24C256 I2C Interface EEPROM Memory Module
SKU: AI0646 ₹57.53 (₹48.75 + GST)Quick Overview:
- Chipset: FT24C256A
- Operating Temperature: -55°C to 125°C
- Storage Temperature: -65°C to 150°C
- The voltage on any pin with respect to ground: -1.0V to 6.25V
- Maximum Operating Voltage: 6.25V DC
CNC Shield V3 Engraving Machine 3D Printer A4988 DRV8825 Driver Expansion Board
SKU: AI0180 ₹99.12 (₹84.00 + GST)Quick Overview
- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
- Coolant enable
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
- Compact design.
- 4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
2.54mm Standard Circuit Board Computer Jumper Cap Shunts Short Circuit Cap Yellow(Pack of 5)
SKU: AI3975 ₹5.90 (₹5.00 + GST)- This is a 2-pin jumper cap.
- This connector creates an electrical connection between two pin headers
- pin spaced: 2.54 mm.
- Color: Yellow
- Materials : Plastic, Meta
Pro Mini ATMEGA168PA 5V/16M Improved Version Module
SKU: AI0454 ₹358.72 (₹304.00 + GST)- ATmega168PA running at 16MHz
- 100% Arduino compatible board
- Colour: Blue
- Material: PCB
- Size: 33x18x6mm
ATmega328P 5V Nano V3.0 Development Board 16MHz CH340 Type-C
SKU: AI2003 ₹263.14 (₹223.00 + GST)QUICK OVERVIEW:
- Product: Arduino NANO
- Model: Nano V3.0 CH340
- Processor: ATmega328
- Operating Voltage: 5V
- Best for your electronic projects
- Tiny size makes it perfect for compact projects.
24 Bit WS2812 5050 RGB LED Built-in Full Color Driving Lights Circular Development Board
SKU: AI3434QUICK OVERVIEW:
- Outer Diameter: 89.5 mm.
- Supply Voltage: DC 4-7V.
- Communication interface: single wire communication.
- Send data at speeds of 800Kbps.
- The color of the light was highly consistent
- Full-color module, Full-color soft lights a lamp strip.
Towerpro MG90S Micro Digital Servo Motor (360° Continuous Rotation)
SKU: AI0940 ₹234.82 (₹199.00 + GST)Model: MG90S
Weight: 13 gm
Operating voltage: 4.8V~ 6.6V
Servo Plug: JR
Stall torque @4.8V : 1.8kg-cm
Stall torque @6.6V : 2.2kg-cm
LED Connector 4pin 10mm (Pack of 2)
SKU: AI5236- LED Connector 4pin 10mm L Shape.
- The connectors of this wire are for strips which PCB board width is 10mm
- Suitable for RGB / RGBW / RGBWW color 5050 LED strips
Free Shipping
On orders above ₹999
COD Available
Min. order ₹250 for COD
GST Invoice
Available on all orders
1,50,000+ Orders
Delivered across India
Expert Support
Toll Free: 1800 209 0998
Product categories
- 3D Printers and Parts (379)
- Batteries, Chargers and Accessories (811)
- Clearance Sale (0)
- Development Boards (438)
- DIY Learning and Robot Kits (117)
- Drone Parts (1364)
- EBike parts (140)
- Electronic Components (783)
- Electronic Modules and Displays (1201)
- FPV Freestyle Mid/High KV Drone Motors (0)
- IoT and Wireless (544)
- Mechanical Parts and Workbench Tools (241)
- Motors & Drivers & Pumps & Actuators (583)
- Sensor Modules (639)