Browse generic and unbranded electronics components at Zbotic. Our Generic category includes quality electronic parts, modules, tools, and accessories from reliable manufacturers without specific brand labelling. These products offer excellent value for prototyping, learning, and projects where brand-specific features are not required. Every product is quality-checked before listing.
Online 3D Printing Service
SKU: P0001 ₹2.36Zbotic provides a professional online 3D printing service in India for students, startups, engineers, and businesses. Our service supports rapid prototyping, custom part manufacturing, and project-based 3D printing with precision and reliability. Our streamlined online process makes it easy to upload designs, get quotes, and receive printed parts delivered to your location.
W1209 12V Digital Temperature Controller Module With Display and NTC Temperature Sensor
SKU: AI0022 ₹113.28 (₹96.00 + GST)Quick Overview:
- Temperature Control Range(°C): -50 to +110
- Resolution @-9.9°C to +99.9°C: 0.1°C
- Resolution @all temperatures: 1°C
- Accuracy: 0.1°C
- Refresh Rate(s): 0.5
- Supply Voltage(V): 12
- Measuring Inputs: NTC10K
- Cable Length: 0.5 Meter
- Output Type: 1 Channel Relay Output
- Capacity: 10A
L9110S Motor Control Driver Chip
SKU: AI0473 ₹13.10 (₹11.10 + GST)- 800mA continuous current output capability per channel;
- Lower saturation voltage;
- TTL / CMOS output level compatible, and can be directly connected to the CPU;
- Output built-in clamp diodes for inductive load;
- Integrated control and drive into a monolithic IC;
- With pin high-voltage protection function;
- Operating temperature: 0 ℃ -80 ℃
ESP-01 ESP8266 Serial WIFI Wireless Transceiver Module
SKU: AI0135 ₹293.82 (₹249.00 + GST)Quick Overview
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
- +19.5dBm output power in 802.11b mode
- Power down leakage current of <10uA
- Integrated low power 32-bit CPU could be used as application processor.
STM8S003F3P6 IC
SKU: AI0490 ₹100.30 (₹85.00 + GST)QUICK OVERVIEW
- Pin count: 20
- Max. number of GPIOs (I/O):16
- External interrupt pins: 16
- Timer CAPCOM channels: 7
- Timer complementary outputs: 2
- A/D converter channels: 5
- High-sink I/Os: 12
- Low-density Flash program memory (byte): 8K
NodeMcu ESP8266 V3 Lua CH340 WiFi Development Board
SKU: AI0182 ₹223.02 (₹189.00 + GST)Quick Overview
- Power Input: 4.5V ~ 9V (10VMAX), USB-powered
- Transfer Rate: 110-460800bps
- Support UART / GPIO data communication interface
- Support Smart Link Smart Networking
- Working temperature: -40°C ~ 125°C
- Drive Type: Dual high-power H-bridge
- Don’t need to download resetting
- A great set of tools to develop ESP8266
- Flash size: 4MByte
- Lowest cost WI-FI
2.54mm Female Headers Berg Strip – 1×40 Pins
SKU: AI0172 ₹8.85 (₹7.50 + GST)Quick Overview
- Number of Pins: 40
- Pin Spacing (pitch): 2.54 mm
- Length of the Strip: 103 mm
- Width of the Strip: 2.4 mm
- Strip Height: 11 mm (with contact points)
0.28 Inch 0-100V Three Wire DC Voltmeter
SKU: AI0349 ₹45.55 (₹38.60 + GST)
RS485 to TTL Converter Module Serial Port UART Hardware Automatic Flow Control Module
SKU: AI0572 ₹41.30 (₹35.00 + GST)Quick Overview:
- Has a 120 ohm termination resistor, shorted R0 to enable the termination resistor.
- Support multi-machine communication, allowing access at up to 128 devices on the bus.
- The module can be hot swapped, the signal does not appear dead phenomenon.
- A large area of copper to prevent interference.
- Compatible with 3.3V and 5.0V power supply.
- Compatible with 3.3V and 5.0V signal.
MI76813DBI ESP8266 Serial Wifi Wireless Gain Antenna
SKU: AI0140 ₹86.14 (₹73.00 + GST)QUICK OVERVIEW
- Radome material: polyurethane
- Flexible cable
- Stable signal
- Best for indoor applications.
- Connector: IPX female to SMA-KY
- Frequency(Hz): 900/1800
- Gain: <3 dB
- VSWR: <1.5
Digispark ATTINY85 USB Development Board
SKU: AI0036Quick Review
- The Onboard, 150 ma 5 v Regulator.
- 8 k Flash Memory (about 6k after bootloader).
- The I2C and SPI (vis USI).
- The Power LED and the Test/Status LEDs.
- Built-in USB and serial were debugging).
- Support for the Arduino IDE 1.0 + (OSX/Windows/Linux)
LT-211(SPL-1) Quick, Connection Terminals Can be, Spliced
SKU: AI2080 ₹14.99 (₹12.70 + GST)- Model: LT-211(SPL-1)
- Rated Voltage:600 V
- Rated Current:32A
- Color: Gray+orange
GY-271 QMC5883L 3-Axis Electronic Compass Module Magnetic Field Sensor
SKU: AI0394 ₹168.74 (₹143.00 + GST)Quick Overview
- 3-axis magnetic electronic compass.
- Precise heading information.
- Operating Voltage: 3 -5 V DC.
- Driver Chip: QMC5883L.
- Communication: I2C protocol.
- Measuring range: ± 1.3-8 Gauss.
L298N Based Motor Driver Module
SKU: AI0026 ₹125.08 (₹106.00 + GST)Quick Overview:
- Operating Supply Voltage: Up to 46V
- Total DC Current: Up to 4A (2A per channel)
- Logical Voltage: 5V
- Drive Voltage: 5V-35V
- Logical Current: 0-36mA
- Drive Current: 2A (max. single bridge)
- Max Power: 25W
- Dimensions: 44 x 44 x 28 mm (LxWxH)
- Weight: 26g
MP3-TF-16P MP3 SD Card Module with Serial Port
SKU: AI0569 ₹88.50 (₹75.00 + GST)Supports sampling rates (KHz): 8 / 11.025 / 12/16 / 22.05 / 24/32 / 44.1 / 48
24-bit DAC output, dynamic range support: 90dB, SNR support: 85dB
Fully supports FAT16, FAT32 file system
Maximum support 32G TF card
Support U disk to 32G, 64M bytes of NORFLASH
Cartoon Ultrasonic Sensor Mounting Bracket For HC-SR04
SKU: AI0229 ₹15.22 (₹12.90 + GST)Quick Overview
- Acrylic Body.
- Easy to install.
- compatible with HC-SR04
CD74HP4067 High Speed CMOS 16-Channel Analog/Digital Multiplexer Breakout Module
SKU: AI0149 ₹63.72 (₹54.00 + GST)
RCWL-0516 Microwave Radar Sensor
SKU: AI0309 ₹37.76 (₹32.00 + GST)Quick Overview
- Microwave frequency: ~3.18 GHz
- Detection range: up to ~7 meters
- Output: Digital HIGH/LOW
- Sensing through obstacles: Yes (non-metallic)
- Compact and low-power
PCT-223-2 Stationary Type, Quick Connection Terminal
SKU: AI2157 ₹26.08 (₹22.10 + GST)Rated voltage: 400V
Rated current: 32A
Number of poles: 2
Wire section: 0.08mm² to 4.0mm²
Number of clamps: 4
12V 3A Touch Sensor Switch for Mirror Light
SKU: AI0680 ₹141.60 (₹120.00 + GST)Quick Overview
- Output Line : 3 Line 150mm
- Input Line : Double Line 300mm
- Voltage : 12V
- Function : White Warm Two-Color Infinite Dimming
65mm Robot Wheel for BO Motors (Yellow)
SKU: AI0009 ₹28.08 (₹23.80 + GST)Quick Overview:
- Loading Capacity (Kg): 2.5
- D hole For BO Motor: 6 mm
- Wheel Diameter(mm): 65 mm
- Color
- Tyre: Black
- Rim: Yellow
- Wheel Width: 27 mm
- Body Material Plastic
- Grip Material Rubber
- Center Shaft Hole Diameter
- 5.4mm-(round side) and 3.5mm-(flat side)
MP 1584 DC-DC 3A Adjustable Buck Module
SKU: AI0498 ₹90.86 (₹77.00 + GST)Input Voltage: 4.5V – 28V
Output Voltage: 0.8V – 20V
Output Voltage Adjustment: On-board potentiometer
Output Current: 1.8A (typical), 3.0A (max).
Ceramic Capacitor Stable
Internal Soft-Start
Internally Set Current Limit without a Current Sensing Resistor
20CM Male to Male Breadboard Jumper Wires 2.5MM – 40Pins
SKU: AI0380 ₹63.72 (₹54.00 + GST)- 40P color DuPont line
- Length: 200mm
- Weight: 30 gm
- 1p-1p pin header, Male to Male
- A row of 40 root
- Durable and reusable
- Easy to install and use
XT30 Male & Female Connector
SKU: AI4446 ₹38.11 (₹32.30 + GST)XT30 Male & Female Connector
Gold plated Connections
Long connection contact points for better current flow
Small and light weight
Weight: 0.7g male, 0.9g female, 1.7g as a set
Size: Male = 16.67×10.59×5.29mm , Female=14.48×10.62×5.65mm
4mm Male&Female Gold Bullet Banana Connector
SKU: AI4439 ₹21.95 (₹18.60 + GST)- Diameter: 4.0mm
- Length:1.9CM & 2.1CM
- Gender: Male-Female
- Hook up RC Battery to Electronic
44E A1344EUA-T Hall
SKU: AI2985 ₹7.86 (₹6.66 + GST)44E A1344EUA-T Hall
Digital Output Hall-effect sensor.
Operating voltage: typically 5V.
Output Current: 25mA.
It can be used to detect both the poles of a magnet.
D1 Mini V2 NodeMCU 4M Bytes Lua Wi-Fi Internet Of Things Development Board Based ESP8266
SKU: AI0157 ₹199.42 (₹169.00 + GST)- D1 Mini V2 NodeMCU 4M Bytes Lua Wi-Fi Internet Of Things Development Board
- Use BRT (Bias Resistor Transistor)
- Easier into flash mode.
- 30% Increase in radiating area
- Good Stability.
BL-8513 Magnetic Anti-theft Alarm Device for Door/Windows
SKU: AI0575 ₹96.76 (₹82.00 + GST)
DS1307 RTC I2C Module AT24C32 without Battery
SKU: AI0106 ₹46.61 (₹39.50 + GST)Interface: Two-wire I2C
Output Pin: 1Hz
Memory: 56 bytes non-volatile RAM
Battery: LIR2032 (included)
Operating Voltage: Standard 3V lithium cell (2V to 3.5V)
Package Options: 8-pin DIP or SOIC
Operating Temperature: Suitable for various environments
Dimensions: Compact and space-saving design
High Current Active Alarm Buzzer Driver Module
SKU: AI0112 ₹27.02 (₹22.90 + GST)
TM1637 4 Bits Digital Tube LED Display Module with Clock Display(Red)
SKU: AI0107Quick Ovceview
- Driver Chip: MAX7219
- Input Voltage: 3.7 to 5.3 V
- Input Current: 30 mA
NEO-6M GPS Module with EPROM
SKU: AI0141 ₹266.68 (₹226.00 + GST)5Hz position update rate.
The cold start time of 38 s and Hot start time of 1 s.
Configurable from 4800 Baud to 115200 Baud rates. (default 9600).
SuperSense ® Indoor GPS: -162 dBm tracking sensitivity.
Support SBAS (WAAS, EGNOS, MSAS, GAGAN).
Separated 18 x 18mm GPS antenna.
18AWG extrasoft Silicone Wire (1m)
SKU: AI4533 ₹30.14 (₹28.70 + GST)18AWG extrasoft Silicone Wire (1m):
Wire gauge: 18AWG
Length: 1m
color: red
Rated Voltage: 600V
Rated Temperature: -60°C~+200°C
Conductor: Tinned Copper
Conductor construction: 150/0.08
Insulation: Silicone Rubber
Note: Wire will also made available as per requirement
OMRON 3D Printer Limit Switch ENDSTOP SS-5GL
SKU: AI0094 ₹47.20 (₹40.00 + GST)Omron micro switch-quality original
Lifetime: 30 million
Rated voltage:125V
Rated current: 5A
Dissipation Power: IC
Supply voltage: IC
Model number: SS-5GL
ZMPT101B 2mA AC Single Phase Voltage Transformer Sensor Relay
SKU: AI0684Low price
Small size (49.5mm x 19.4mm) and lightweight
Easy PCB mounting
Good consistency
Widely acclaimed.
5V Step-Up Power Module Lithium Battery Charging Protection Board
SKU: AI0013 ₹25.25 (₹21.40 + GST)BAT Discharging Stop Voltage:2.9V
Discharging Efficiency:85%(input 3.7V output 5V/1A)
Charging and discharging indication
Internally installed charging and discharging power MOS
Preset 4.2V charging voltage, precision ±1%
Max 8uA standby current
Integration charging management and discharging management
Intelligent temperature control and overtemperature protection
Integration output overvoltage protection, short circuit protection, overload protection
Nano Board R3 with CH340 Chip without USB Cable Compatible with Arduino (Unsoldered) without USB Cable Compatible with Arduino (Unsoldered)
SKU: AI0396 ₹220.66 (₹187.00 + GST)Quick Overview
- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- Standard 0.1” spacing DIP (breadboard friendly).
Black R13-507 16MM 2PIN Momentary Self-Reset Round Cap Push Button Switch
SKU: AI3401 ₹17.46 (₹14.80 + GST)QUICK OVERVIEW:
- Self-locking/Latching Self-reset
- Good electrical conductivity
- This is Momentary type push-button switch
- Easy to use
- Light Weight
- Function: Momentary
,
- Self-locking/Latching Self-reset
- Good electrical conductivity
- This is Momentary type push-button switch
- Easy to use
- Light Weight
- Function: Momentary
USB Charger Doctor (Voltmeter Ammeter)
SKU: AI0057Compact and easy to carry, no additional power supply, plug, and play.
It can easily measure the output voltage of the USB port and the device operating current or load voltage
Detect any USB charger such as PC USB, home charger, car charger.
Operating Voltage: 3 to 20V
Maximum Current: 3 A
0.56inch 0-30V Three Wire DC Voltmeter Red
SKU: AI3939 ₹48.09 (₹40.75 + GST)QUICK OVERVIEW:
- 0.56″Digital Voltmeter
- DC 0-30V 3 Wires
- Voltage Panel Meter LED Display
SMD 3 Color LED Module
SKU: AI0342 ₹40.12 (₹34.00 + GST)Quick Overview:
- RGB Trichromatic limiting resistor to prevent burnout
- PWM Adjusted Color Mixing
- Working Voltage: 5V
- LED Drive Mode: Common Cathode Driver
Anti-Corrosion Water Level Sensor with Ball Float Switch
SKU: AI0579 ₹113.28 (₹96.00 + GST)
0.56inch 0-100V Three Wire LED Display Digital DC Voltmeter-RED
SKU: AI2320 ₹75.52 (₹64.00 + GST)
28BYJ-48 5V Stepper Motor
SKU: AI0043 ₹79.06 (₹67.00 + GST)Quick Review
- Rated voltage: 5V DC
- Reduction Ratio: 64:1
- Step Angle: 5.625° / 64
- Frequency: 100Hz
- Self-positioning Torque: >34.3mN.m
- Friction torque: 600-1200 gf.cm
- Pull-in torque: 300 gf.cm
3296W-1-502LF 5K Ohm Multiturn Trimpot Through Hole
SKU: AI0685- 3/8inch square potentiometer
- Side or top adjustment with lead screw
- Sealing is IP65 rated
- 25 turns and rotational life of 200 cycles
- Resistance value ranges from 10 ohm to 2Mohm
- ±10% tolerance
- Temperature coefficient is ±100ppm/°C
MB102 830 Points Solderless Breadboard
SKU: AI0046 ₹59.00 (₹50.00 + GST)Quick Review
- Mb102 Bread Board
- 830 Solder-less Points
- Ideal for Experimenting with Circuit Design in Labs
- Compatible with resistance, diodes, transistors, LED’s, Capacitors and other types of electronic components
- Colored coordinates for easy components placement.
18650 X 4 Cell Battery Holder For Lithium-Ion
SKU: AI0701Hold 4 standard 18650 batteries.
Wire Length: 15 cm.
Output: 14.8 V.
Dimension (Appro.) : 80 x 76 x 18 mm.
Weight: 28 gm.
High-quality plastic material
0.96 Inch I2C/IIC 4pin OLED Display Module (Yellow + Blue) Without Soldered Pin
SKU: AI0119Quick Overview
- Display size: 0.96″
- Resolution radio:128 x 64
- Interface modes: I2C/IIC
- Working voltage: 3.3V
- Control Chip: SSD1306
5A Range Current Sensor Module ACS712
SKU: AI0334 ₹92.04 (₹78.00 + GST)Quick Overview:
- Product Name: 5A Range Current Sensor Module ACS712
- Low-noise analog signal path.
- Device bandwidth is set via the new FILTER pin.
- 5 µs output rise time in response to step input current.
- Small footprint, low-profile SOIC8 package.
- 1 kV RMS minimum isolation voltage from pins 1-4 to pins 5-8.
L293D Motor Driver Shield for Arduino
SKU: AI0031 ₹128.62 (₹109.00 + GST)Wide supply voltage: 4.5 V to 12 V.
Max supply current: 600 mA per motor.
The driver two holes of 3 mm dia.
Male burg-stick connectors for supply, ground and input connection.
Screw terminal connectors for easy motor connection.
High noise immunity inputs.
DC Automatic On/Off Photocell Street Lamp Light Switch Controller AC 220V 50-60Hz 10A Photo Control Photo Switch Sensor
SKU: AI0812
Model: AS-10-220
Input Voltage: AC 220V
Max Load Current: 10A
Frequency:50-60Hz
Load power: 2200W
Off delay time: 0.1S
PAM8403 5V Two-channel Stereo Mini Class-D 3W+3W Audio Amplifier
SKU: AI0607Quick Overview
- Dual channel stereo, high output power (3 w + 3 w power @ 5V and 4 ohms load)..
- Double panel wiring solves crosstalk.
- Super mini design allows it to be easily placed in a variety of digital products.
- 3W Output at 10% THD with a 4ΩLoad and 5V Power Supply.
- Filter-less, Low Quiescent Current and Low EMI and Low Noise.
- Short Circuit Protection and Thermal Shutdown
150W DC-DC Step-Up Boost Converter 10-32V to 12-35V 6A Adjustable Power Supply Module
SKU: AI0176 ₹132.16 (₹112.00 + GST)- Input voltage :10-32V
- Output voltage: 12-35V (adjustable)
- Output Current: 10A (MAX)
- Input Current: 16A (MAX) (Please enhance heat dissipation if more than 10A)
- The non-isolated step-up power conversion module
- Onboard LED illuminates when the voltage is applied to the module
- Equips Multi-turn Potentiometer.
RXB6 433Mhz Superheterodyne Wireless Receiver Module
SKU: AI0460 ₹152.22 (₹129.00 + GST)
2.54mm High Quality Gold Plating 1*40pin Straight Single Row Round Pin Header
SKU: AI3627Gender: Male header
Rated Current: 3A.
Lead Spacing: 2.54mm Pitch.
Plating: Gold
Adapter Connector Cable DC Plug 5.5×2.1mm Male To 5.5×2.1mm Male Adapter Connector Cable 1M
SKU: AI2190 ₹34.57 (₹29.30 + GST)
3S 11.1V 10A 18650 Lithium Battery Overcharge And Over-current Protection Board-Good Quality
SKU: AI1052 ₹80.24 (₹68.00 + GST)Quick Overview:
- Product Name: 3S 11.1V 10A 18650 Lithium Battery Overcharge And Over-current Protection Board-Good Quality
- Three series of lithium battery protection board.
- Automatically cancel protection after protection conditions restore.
- Suitable for lithium battery pack of 11.1V, 12V, 12.6V.
- Quiescent current < 30uA, so power consumption is small.
- With the function of overcharge protection, over discharge protection, short circuit protection, over-current protection.
MAX30100 Pulse Oximeter Heart Rate Sensor Module
SKU: AI0090 ₹84.96 (₹72.00 + GST)Quick Overview
- I2C interface plus INT pin
- Tiny 5.6mm x 2.8mm x 1.2mm 14-Pin Optically Enhanced System-in-Package
- Ultra-Low-Power Operation Increases Battery Life for Wearable Devices
- Programmable Sample Rate and LED Current for Power Savings
- Ultra-Low Shutdown Current (0.7µA, typ)
- Advanced Functionality Improves Measurement Performance
- High SNR Provides Robust Motion Artifact Resilience
MQ-3 Alcohol Gas Sensor Module
SKU: AI0109 ₹113.28 (₹96.00 + GST)Quick Overview
- Power Requirements: 5VDC @ ~165mA (heater on) / ~60mA (heater off)
- Current Consumption: 150mA
- Digital Output (DO): 0.1V and 5V
- Analog Output (AO): 0.1V – 0.3V (relative to pollution), maximum concentration voltage of about 4V
- Detecting Concentration: 0.05 – 10mg/L Alcohol
HC-05 6pin Bluetooth Module with Button
SKU: AI0016 ₹265.50 (₹225.00 + GST)Quick Overview:
- Frequency: 2.4GHz ISM band
- Modulation: GFSK (Gaussian Frequency Shift Keying)
- Emission power: ≤4dBm, Class 2
- Sensitivity: ≤-84dBm at 0.1% BERCSR Bluetooth Chip Solution
- Full Speed Bluetooth Operation with Full Piconet Support and Scatternet Support
- Incredible small size with 3.3V input, and RoHS Compliant
- UART interface and with baud rate setup function
KSD301 Normal Close NC Temperature Controlled Switch Thermostat
SKU: AI2823 ₹27.49 (₹23.30 + GST)- Model: KSD301
- Rated Voltage: 250V
- Rated Current: 10A
- Rated Temparature: 85ºC
A4988 Stepper Motor Driver Module
SKU: AI0199 ₹94.40 (₹80.00 + GST)Quick Overview
- Supply Voltage : 8-35 VDC.
- Current : 1.0A (no heatsink ).
- Current : 2.0A (with heat-sinking).
- Logic input : 3 – 5.5V .
- Automatic current decay mode detection / choice.
- Mixed with slow current decay mode.
USB 2.0 A Male to Mini-B Male Cable-1m
SKU: AI0366 ₹46.02 (₹39.00 + GST)Quick Overview
- Connector A: Male USB A
- Connector B: Male USB Mini B
- Length: 1m
- USB Type: 2.0
12mm Bore Inner Ball Mounted Pillow Block Insert Bearing KP001
SKU: AI2878QUICK OVERVIEW:
- Bearing Model: KP001
- Material: Zinc Alloy
- Bearing Internal Diameter: 12mm
- Bearing Outside Diameter: 30mm
- Bearing Width: 12mm
- Mount Hole Distance: 55mm
- Net Weight: 50 gm
PCT-222T(SPL-2) Transparent Quick Connection Terminal
SKU: AI3043 ₹15.46 (₹13.10 + GST)
USB Fast Charging Module
SKU: AI1137 ₹69.62 (₹59.00 + GST)
Reed Switch 2 x 14mm Magnetic Control Switch -Normally Open Contact-(Pack of 10 Pcs.)
SKU: AI0093 ₹92.04 (₹78.00 + GST)Small Module.
Very easy to use.
Glass Length: 14mm
Glass Diameter: 2mm
Total Length: 45mm
Max. Switching Voltage: 300 VDC
Min. Breakdown Voltage: 150 VDC
Max. Contact Rating: 10W
Max. Switching Current: 0.55 A
Max. Operate time: 0.45 ms
22AWG extrasoft Silicone Wire (length: 2m)
SKU: AI4534 ₹35.40 (₹30.00 + GST)Color : Red
Length : 2m
Gauge : 22 AWG
Rated Voltage: 600V
Rated Temperature: -60°C~+200°C
Conductor: Tinned Copper
Conductor construction: 60/0.08
Insulation: Silicone Rubber
Note: Wire will also made avaitlable as per requirement
Micro USB Cable for ESP32-1 mtr
SKU: AI0921 ₹42.01 (₹35.60 + GST)Length: 1 meter
Connector 1: Standard USB Type-A
Connector 2: Micro USB Type-B
Compatibility: Designed for use with ESP32 microcontrollers
12V/24V to 5V 5A Power Module Dc-DC XY-3606 Power Converter
SKU: AI0582 ₹132.16 (₹112.00 + GST)Working voltage: DC 9V–36V
Output voltage: 5.2V/5A/25W
9~24V input: Output 5.2V/6A/30W
24~32V input: output 5.2V/5A/25W
32~36V input: output 5.2V/3.5A/18W
1/8 inch Water Flow Sensor – YF-S401
SKU: AI0190 ₹204.14 (₹173.00 + GST)Model: YF-S401
Working Voltage: DC 3.5V~24V
Maximum Working Current: 15mA @ 5V DC
Flow Rate Range: 0.3~6L/min
Connection: 6mm (external diameter)
Inlet Water Pipe Diameter: 2.5-4mm
Load Capacity: ≤10mA (DC 5V)
Linear Magnetic Hall Sensor
SKU: AI0328 ₹38.00 (₹32.20 + GST)Quick Overview:
- Operating Voltage: 3.3V-5V
- Features wide range voltage comparator LM393
- Adjustable sensitivity
- Signal output indicator with the retaining bolt hole, convenient installation
- Output form digital switch output (0 and 1 high and low level)
- The output effective signal is low level
- When there is sound, outputs low level and the signal light
ULN2003 Stepper Motor Driver Board
SKU: AI0028 ₹41.77 (₹35.40 + GST)Size: 42mmx30mm
Use ULN2003 driver chip, 500mA
Hole pitch: standard 2.54mm
A. B. C. D LED indicating the four phase stepper motor working condition
White jack is the four phase stepper motor standard jack
Power pins are separated
Lora Antenna 868mhz
SKU: AI1070 ₹62.54 (₹53.00 + GST)Center Frequency: 868 MHz
Wavelength: ¼-wave
VSWR: ≤ 1.9 typical at center
Peak Gain: 0.6dBi
Impedance: 50-ohms
Set of Aluminum Heatsink for Raspberry Pi (Large and Small)
SKU: AI0251 ₹12.86 (₹10.90 + GST)
LCD Electronic Fish Tank Water Detector Thermometer
SKU: AI0492 ₹81.42 (₹69.00 + GST)Temperature range: -50°C ~ +110°C
Temperature display resolution: ±0.1
temperature measurement accuracy: 1°C
Cable Length: 1M
Display Dimensions : 48 x 29 x 16 (LxWxH) mm.
Easy to use, small and handy module.
Tube Type Inductive Proximity Sensor Detection Switch NPN DC6-36V 4mm Normally Open switch LJ12A3-4-Z/BX
SKU: AI0145 ₹160.48 (₹136.00 + GST)QUICK OVERVIEW
- Output Type: NPN-NO
- Red LED checks the state of the proximity sensor
- High repeated positioning accuracy
- High switching frequency
- Wide voltage range
- Antivibration, dust, water and oil prevention
- Reverse power protection, short circuit protection, directly connecting with PLC
- Can replace small switches and limit switches
Heart Rate Pulse Sensor Module
SKU: AI0050 ₹119.18 (₹101.00 + GST)Quick Overview:
- Product Name: Heart Rate Pulse Sensor Module
- Operating voltage: 5V
- Operating current: 4mA
- Pulse Sensor Board
- 24-inch Color-Coded Cable with Standard Male Headers
- Ear Clip for Earlobe Heart Rate Measurement
- Velcro Finger Strap
- Transparent Stickers to Protect Sensor
CR2032 3V Lithium Coin Battery
SKU: AI0828 ₹12.98 (₹11.00 + GST)
BF350 High Precision Resistance Strain Gauge / Pressure Sensor / Weighing Sensor 350 Ohm (Pack Of 5)
SKU: AI0447 ₹107.38 (₹91.00 + GST)Technical Indexes: BF series
Strain limit: 2.0%
Fatigue life: ≥1M
Resistance: 350 ohms
Contrast: 800: 1 (Min) (transmission)
Sensitivity Co-efficient: 2.00-2.20
Free Shipping
On orders above ₹999
COD Available
Min. order ₹250 for COD
GST Invoice
Available on all orders
1,50,000+ Orders
Delivered across India
Expert Support
Toll Free: 1800 209 0998
Product categories
- 3D Printers and Parts (379)
- Batteries, Chargers and Accessories (811)
- Clearance Sale (0)
- Development Boards (438)
- DIY Learning and Robot Kits (117)
- Drone Parts (1364)
- EBike parts (140)
- Electronic Components (783)
- Electronic Modules and Displays (1201)
- FPV Freestyle Mid/High KV Drone Motors (0)
- IoT and Wireless (544)
- Mechanical Parts and Workbench Tools (241)
- Motors & Drivers & Pumps & Actuators (583)
- Sensor Modules (639)