Browse generic and unbranded electronics components at Zbotic. Our Generic category includes quality electronic parts, modules, tools, and accessories from reliable manufacturers without specific brand labelling. These products offer excellent value for prototyping, learning, and projects where brand-specific features are not required. Every product is quality-checked before listing.
Zbotic provides a professional online 3D printing service in India for students, startups, engineers, and businesses. Our service supports rapid prototyping, custom part manufacturing, and project-based 3D printing with precision and reliability. Our streamlined online process makes it easy to upload designs, get quotes, and receive printed parts delivered to your location.
QUICK OVERVIEW
QUICK OVERVIEW
Working voltage: AC85-265V
Shell size: 37.2*27.5mm
Load power: <40W
Sensing distance: 3-5m
Induction angle: 120 degrees
Delay time: 30s
QUICK OVERVIEW
Supports sampling rates (KHz): 8 / 11.025 / 12/16 / 22.05 / 24/32 / 44.1 / 48
24-bit DAC output, dynamic range support: 90dB, SNR support: 85dB
Fully supports FAT16, FAT32 file system
Maximum support 32G TF card
Support U disk to 32G, 64M bytes of NORFLASH
Product Name : Potentiometer
Resistance Value : 50K ohm
Adjustment Type : Top Adjustment
Type : Single Linear (Type B)
Features : Knurled Shaft
Shaft Diameter : 6mm / 0.23″
Shaft Length : 10mm / 0.4″
Thread Hole Dia : 6.2mm / 0.24″
Base Height : 9mm / 0.35″
Base Size : 11 x 9.5mm / 0.43″ x 0.37″(L*W)
Microwave frequency: ~3.18 GHz
Detection range: up to ~7 meters
Output: Digital HIGH/LOW
Sensing through obstacles: Yes (non-metallic)
Compact and low-power
Supply Voltage: 3.3 V/ 5V.
Interface Type: I²C, SPI.
Sensing Range: ±2g, ±4g, ±8g, ±16g.
Sensitivity:
X: 28.6 LSB/g.
Y: 31.2 LSB/g.
Z: 34.5 LSB/g.
Ultra Low Power: 40µA in measurement mode, 0.1µA in standby@ 2.5V.
Free-Fall Detection.
Tap/Double Tap Detection.
Rated voltage: 400V
Rated current: 32A
Number of poles: 2
Wire section: 0.08mm² to 4.0mm²
Number of clamps: 4
Real-Time Clock Counts Seconds,
Minutes, Hours, Date of the Month,
Month, Day of the Week, and Year,
Also with Leap-Year Compensation Valid Up to 2100
Input Voltage: 4.5V – 28V
Output Voltage: 0.8V – 20V
Output Voltage Adjustment: On-board potentiometer
Output Current: 1.8A (typical), 3.0A (max).
Ceramic Capacitor Stable
Internal Soft-Start
Internally Set Current Limit without a Current Sensing Resistor
Interface: Two-wire I2C
Output Pin: 1Hz
Memory: 56 bytes non-volatile RAM
Battery: LIR2032 (included)
Operating Voltage: Standard 3V lithium cell (2V to 3.5V)
Package Options: 8-pin DIP or SOIC
Operating Temperature: Suitable for various environments
Dimensions: Compact and space-saving design
Operating voltage 3.3V-5V
PCB Dimensions: 29 (L) x 14 (W) x 12 mm (H)
Wire length: 20cm
Weight: 7 gm.
Frequency: 2500Hz
5Hz position update rate.
The cold start time of 38 s and Hot start time of 1 s.
Configurable from 4800 Baud to 115200 Baud rates. (default 9600).
SuperSense ® Indoor GPS: -162 dBm tracking sensitivity.
Support SBAS (WAAS, EGNOS, MSAS, GAGAN).
Separated 18 x 18mm GPS antenna.
44E A1344EUA-T Hall
Digital Output Hall-effect sensor.
Operating voltage: typically 5V.
Output Current: 25mA.
It can be used to detect both the poles of a magnet.
QUICK OVERVIEW
Onboard LM386 Chip.
200 multiplier benefits circuit design.
On-board speaker wiring Block.
On-board 10K variable resistor, you can adjust the volume of the enlarged.
Onboard Power Indicator.
Omron micro switch-quality original
Lifetime: 30 million
Rated voltage:125V
Rated current: 5A
Dissipation Power: IC
Supply voltage: IC
Model number: SS-5GL
Low price
Small size (49.5mm x 19.4mm) and lightweight
Easy PCB mounting
Good consistency
Widely acclaimed.
BAT Discharging Stop Voltage:2.9V
Discharging Efficiency:85%(input 3.7V output 5V/1A)
Charging and discharging indication
Internally installed charging and discharging power MOS
Preset 4.2V charging voltage, precision ±1%
Max 8uA standby current
Integration charging management and discharging management
Intelligent temperature control and overtemperature protection
Integration output overvoltage protection, short circuit protection, overload protection
QUICK OVERVIEW:
,
Compact and easy to carry, no additional power supply, plug, and play.
It can easily measure the output voltage of the USB port and the device operating current or load voltage
Detect any USB charger such as PC USB, home charger, car charger.
Operating Voltage: 3 to 20V
Maximum Current: 3 A
QUICK OVERVIEW:
QUICK OVERVIEW
Rating contract (Max.): 10 W
Switching power supply (Max.): 110VDC
Resistance contract (Max.): 100 Ω
Appro. Float Ball Size (mm) : 24×17 (LxD)
Body Total Length (mm) : 85
Cable Length (cm) : 37
Total Float opening: 70°
Switch ON/OFF angle Approx. betn 15° to 20°
Model number: TEC1-12706
Operating Voltage: 12V
Maximum Voltage Umax (V): 15.4V
Maximum Current Imax (A): 6A
Maximum Power: 92 W
Maximum Temperature: 138°C
Power Cord: 200mm
Hold 4 standard 18650 batteries.
Wire Length: 15 cm.
Output: 14.8 V.
Dimension (Appro.) : 80 x 76 x 18 mm.
Weight: 28 gm.
High-quality plastic material
Wide supply voltage: 4.5 V to 12 V.
Max supply current: 600 mA per motor.
The driver two holes of 3 mm dia.
Male burg-stick connectors for supply, ground and input connection.
Screw terminal connectors for easy motor connection.
High noise immunity inputs.
Model: AS-10-220
Input Voltage: AC 220V
Max Load Current: 10A
Frequency:50-60Hz
Load power: 2200W
Off delay time: 0.1S
On orders above ₹999
Min. order ₹250 for COD
Available on all orders
Delivered across India
Toll Free: 1800 209 0998