Buy official Arduino products online in India at Zbotic. Arduino is the world’s leading open-source electronics platform, making technology accessible to everyone. We stock genuine Arduino boards, shields, and kits backed by Arduino’s quality assurance and the largest maker community globally. Arduino products are the gold standard for learning electronics, prototyping, and building interactive projects.
Arduino Uno R3 CH340G ATMega328PB Development Board Compatible with Arduino
SKU: AI0002Quick Review:
- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
Water Level Depth Detection Sensor for Arduino
SKU: AI0049 ₹15.69 (₹13.30 + GST)Operating voltage: DC3-5V
Operating current: less than 20mA
Sensor Type: Analog
Detection Area: 40mmx16mm
Operating temperature: 10-30
Humidity: 10% -90% non-condensing
Arduino UNO R3 Development Board ATMEGA16U2 ATMEGA328P (DIP)
SKU: AI0001Quick Review:
- 14 digital input/output pins,
- 6 analogue inputs,
- 16 MHz crystal oscillator,
- USB connection,
- power jack,
- ICSP header
USB to DC Cable (Power Cable for Arduino Uno and Mega )1 meter
SKU: AI0446- Color – Black
• Cable Length – 1 Meter
• Wire Thickness – 3.5 mm
• Wire Material – LD
• Core – 2
• Core Wire 12-40
• Core Material – Copper
CH340G USB To TTL(Serial) Converter For Arduino Nano Raspberry Pi
SKU: AI0327 ₹94.40 (₹80.00 + GST)Built-in USB to TTL Transfer chip.
Designed to be used for USB to TTL electronic projects.
TTL interface output, easy to connect to your MCU.
Dual 3.3V and 5V Power output, work with 3.3v and 5 V target device.
The mini-module is designed specifically for STC download and ARDUINO PRO supports all series of STC
Supports WIN7/VISTA/MAC/LINUX(32 bit /64-bit system)
MQ 135 Air Quality/Gas Detector Sensor Module For Arduino
SKU: AI0245 ₹110.92 (₹94.00 + GST)Sensitivity to Ammonia, Sulphide and Benzene steam
Sensitive for benzene, alcohol, smoke
Fast response and recovery
Adjustable sensitivity
Signal output indicator
Output voltage boosts along with the concentration of the measured gases increases.
USB Cable For Arduino UNO/MEGA-30cm
SKU: AI0079 ₹29.97 (₹25.40 + GST)USB Type: Type-A to Type-B
Cable Length: 30 cm
Shielding: Aluminum under-mold shield
Compatibility: Fully compatible with PCs
Compliance: Meets FCC requirements on KMI/RFI interference
Sound Detection Module Sensor for Intelligent Vehicle Arduino Compatible
SKU: AI0069 ₹45.55 (₹38.60 + GST)Main chip: LM393, Electret condenser microphone
Working voltage: DC 3.3-5V
Induction distance is 0.5M
Signal output Indication
Single channel signal output
The output effective signal is low level.
Transparent Acrylic Case For Arduino UNO R3
SKU: AI0045Quick Overview
- Protective case of Arduino Uno.
- Color: Transparent.
- Fastened by eight screws.
- Made by high grade acrylic.
- Provides excellent protection, with fashion appearance.
- Unique design for Uno with pin leakage, which provides easy connection to other components.
RDA5807M FM Stereo Radio Module RRD-102 V2.0 Wireless Pro for Arduino Tuner
SKU: AI0609Quick Overview
- Supply voltage: 2.7 to 3.3 V.
- Output Impedance: 32Ω.
- Frequency band: 50 -115 MHz.
- Digital auto gain control (AGC).
- Only support 2-wire bus interface.
NANO IO Shield Expansion Board For Arduino Screw Terminals
SKU: AI2546Compatible with Arduino NANO
All digital and analog pins breakout
Compact size.
Leads all pins out, convenient for wiring and doing experiments.
Dimensions: 53 x 36 x 12 (LxWxH) mm.
Weight: 22 gm.
CH340G USB to RS232 TTL Auto Converter Adapter Module for Arduino
SKU: AI0648 ₹81.42 (₹69.00 + GST)Quick Overview:
- Resettable fuse with 500mA
- 3.3V / 5V real switchable
- 3.3V comes with the transformer
- Green Data reception indicator
- Multifunction CTS access products
- Dual protection circuit
- Full-function pins 5P
- Blue power indicator
Cable for Arduino UNO/MEGA (USB A to B)-1M
SKU: AI1400 ₹61.36 (₹52.00 + GST)QUICK OVERVIEW
- Product Name: Cable for Arduino UNO/MEGA (USB A to B)-1M
- Fully compatible with the PC.
- Moulded strain relief and PVC over moulding to ensure a lifetime of error-free data transmissions.
- Aluminium under mould shield helps meet FCC requirements on KMI/RFI interference.
- Foil and braid shield complies with fully rated cable specifications reducing EMI/FRI interference.
Tilt Sensor Vibration Alarm Vibration Switch Module for Arduino
SKU: AI0098 ₹43.90 (₹37.20 + GST)Quick Overview
- Operating voltage: 3.3 to 5VDC
- Ball Rolling type of tilt sensor.
- A Fixed bolt hole for easy installation
- Wide Voltage LM393 comparator
Cable for Arduino Nano (USB 2.0 A to USB 2.0 Mini B) 80cm – Black
SKU: AI6508 ₹33.98 (₹28.80 + GST)- Color: White & Black
- Cable Length: 80 Cm
- Wire Thickness: 4 mm
- Wire Material: PVC
- Core: 4
- Core Material: Copper
- Core Wire: 10-40, 12-40
Tiny RTC Real Time Clock DS1307 I2C IIC Module for Arduino
SKU: AI3431 ₹39.65 (₹33.60 + GST)
QUICK OVERVIEW:
- Operating Voltage: 5V
- Two wire I2C interface
- Hour: Minutes: Seconds AM/PM
- Leap year compensation
- Accurate calendar up to the year 2100
- Consumes Less than 500nA in Battery-Backup
Ethernet W5100 Shield Network Expansion Board w/ Micro SD Card Slot for Arduino
SKU: AI0414 ₹789.42 (₹669.00 + GST)Quick Overview
- Based on the W5100Based on the Wiznet W5100 allows an Arduino board to connect to the internet.
- Stackable Design, can directly be supported by for Arduino official Ethernet Library.
- Supports up to four simultaneous socket connections
- Can be used to store files for serving over the network.
- Can be accessed using the Mini SD TF library.
- IEEE802.3af compliant
- Low output ripple and noise (100mVpp)
- Overload and short-circuit protection
Liquid pH Value Detection Sensor for Arduino
SKU: AI0346 ₹663.16 (₹562.00 + GST)Heating voltage: 5±0.2V
Working current: 5-10mA
The detection concentration range: PH0-14
The detection range of temperature: 0-60 centigrade
The response time: ≤ 5S
Stability time: ≤ 60S
Power consumption: ≤ 0.5W
LilyPad 328 ATmega328P Main Board 16M Compatible with Arduino
SKU: AI0102 ₹292.64 (₹248.00 + GST)Quick Overview
- Microcontroller: ATmega328P
- Operating Voltage: 2.7V to 5.5V
- Digital I/O Pins: 14
- PWM Channels: 6
- Analog Input Channels: 6
- DC Current per I/O Pin: 40mA
- Board will run from 2V to 5V
LilyPad Tri-Color LED RGB Module for Arduino
SKU: AI0736Quick Overview
- Tri-Color LED Board
- Wearable e-textile technology.
- Washable
3D Printer Controller Board RAMPS 1.4 for Arduino Mega Shield
SKU: AI0311 ₹433.06 (₹367.00 + GST)Supply Voltage: 12V
Standard interfaces (as that of the extruder)
Reserved GCI like I2C and RS232
3 MOSFET’s are applied to the heater/ fan and thermistor circuit.
Another 5A added to protect the component parts.
An 11A fuse is added to the hotbed.
Support 5 stepper drive board
USB Cable for Arduino UNO – 50cm (Black)
SKU: AI2140Product Name: USB Cable for Arduino UNO – 50cm (Black)
USB Type: Type-A to Type-B
Color: Black
Cable Length: 50cm
Compatibility: Compatible with Arduino Uno, Arduino Mega 2560, and other boards with USB female A port
USB Standard: USB 2.0
Sensor Shield V5 Expansion Board For Arduino
SKU: AI0593Retain the merits of the V4.0 version
Laminated design
PCB immersion gold processing technology
IIC interface
Bluetooth module communication interface
SD card module communication interface
APC220 wireless rf modules communication interface
RB URF v1.1 ultrasonic sensors interface
12864 LCD string of line and parallel interface
32 servo controller interface
4×5 Matrix Array 20 Key Membrane Switch Keypad Keyboard For Arduino
SKU: AI2388- 4×5 Matrix Array 20 Key Membrane Switch Keypad Keyboard For Arduino
- Operating Voltage: 12V DC
- Connector Type: 5-pin 2.54mm pitch connector
- Layout: 4×5 matrix array (20 keys)
- Lifespan: 100 million keystrokes
IRF520 MOSFET Driver Module for Arduino ARM Raspberry pi
SKU: AI2498 ₹48.38 (₹41.00 + GST)QUICK OVERVIEW:
- Voltage: 3.3 – 5V.
- Ports: Digital Level.
- Output load voltage: 0-24 V.
- Output load current: <5A (1A above need to add heat sink).
- Platform: Arduino, MCU, ARM, raspberry pi.
- Using original IRF520 Power MOS, you can adjust the output PWM
Leonardo R3 Board Micro-USB Compatible with Arduino
SKU: AI1528 ₹444.86 (₹377.00 + GST)QUICK OVERVIEW
- Microcontroller: ATmega32u4
- Operating Voltage: 5V
- Input Voltage (Recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 20
- PWM Channels: 7
- Analog Input Channels: 12
Transparent Acrylic Case Shell Enclosure Gloss Box For Arduino Mega 2560 R3
SKU: AI5258- Compatible with Arduino MEGA2560 R3 (unassemble).
- The cover can be adjusted.
- Color: Transparent.
- Material: Acrylic.
1.8 Inch SPI 128×160 TFT LCD Display Module With PCB for Arduino
SKU: AI2327 ₹325.68 (₹276.00 + GST)QUICK OVERVIEW:
- Display Size: 1.8″
- Driver IC: ST7735
- Input Voltage (V): 3.3 to 5
- Pixel Resolution: 128 x 160
- Interface Type: SPI
XBee USB Adapter FT232RL for Arduino with Cable
SKU: AI1314 ₹270.22 (₹229.00 + GST)XBee USB Adapter FT232RL for Arduino with Cable:
- Microprocessor: FT232RL.
- Power supply: 3.3V and 5V DC.
- Interface: Mini-B USB, 2.54mm pitch pin header.
- Adapter socket: XBee compatible 2.0mm pitch female pin header.
- 3.3V and 5V IO compatible.
- USB 2.0 protocol.
- Easily connected to a PC via mini USB cable.
- XBee compatible 2.0mm pitch female pin header.
Nano IO Expansion Shield for Arduino NANO 328P
SKU: AI2545QUICK OVERVIEW:
- All digital and analog pins breakout
- XBee and nRF24L01+ module interface
- External power supply current support
- Compatible pin map for electronic brick
- Output Voltage-3.3V
- 7-12V external power supply.
Arduino Uno R3 Beginners Kit
SKU: AI0491 ₹2,439.06 (₹2,067.00 + GST)QUICK OVERVIEW
- Great for Starting with Arduino Programming
- A variety of components are included in this pack to try out different projects.
5V Active Alarm Buzzer Module for Arduino
SKU: AI5243 ₹44.13 (₹37.40 + GST)- Operating voltage 3.3V-5V
- PCB Dimensions: 29 (L) x 14 (W) x 12 mm (H)
- Wire length: 20cm
- Weight: 7 gm.
- Frequency: 2500Hz
SD Card Reading Writing Module for Arduino
SKU: AI2454 ₹51.45 (₹43.60 + GST)QUICK OVERVIEW:
- All SD SPI pins output, MOSI, SCK, MISO, and CS.
- Support 5V/3.3V input.
- This module can handle 2GB SD cards.
- Size:4.7 x 3.1 cm.
- LED indicator.
- SD Card Holder.
- Onboard 3.3V regulator (AMS1117-3.3) for +5v to 3.3V generation. 3.3V is also available as output.
16×2 (1602) LCD Keypad Shield – Blue Backlight for Arduino
SKU: AI0820 ₹187.62 (₹159.00 + GST)
Blue Backlight with white words
uses 4 Bit Arduino LCD Library
Left, Right, Up, Down and Select buttons
Screen contrast adjustment
Arduino Reset button
Operating Voltage is 5V
Original Arduino Uno Rev3 A000066
SKU: AI5973 ₹1,780.62 (₹1,509.00 + GST)Manufacturer: Arduino Officials
Micro-controller : ATmega328P.
Operating Voltage: 5V.
Input Voltage (recommended) : 7-12V.
Digital I/O Pins: 14 (of which 6 provide PWM output).
Analog Input Pins: 6.
Analog Sound Sensor Microphone Module for Arduino
SKU: AI2417QUICK OVERVIEW:
- Detectable sound signal size
- Built-in filter-rectifier circuit, DC signal output
- Good sensitivity, built-in amplifier circuit, adjustable gain
- Voltage signal for sound intensity can be obtained by AD conversion
- Analog voltage signal output, signal amplitude VCC/2
- Compatible for Arduino sensor interface.
8 Pin Female 11mm tall stackable Header Connector for Arduino-(Pack of 5)
SKU: AI1415 ₹40.59 (₹34.40 + GST)- Pitch 2.54mm.
- Plastic height: 8.5mm
- Pin Length: 11mm
- Gender of Connector: Female
- Number of Pins: 8 Pin
- Type of Row: Single-Row
- Body Orientation: Straight
Full Color LED Module / RGB V2 Light Water for Arduino
SKU: AI1089 ₹92.04 (₹78.00 + GST)Good PRINT PACK design, very beautiful.
8 worlds of the three primary colors (red-green-blue) LED color, scanning control mode.
Applicable for various platforms, such as 51 / AVR / AVR / ARM / for Arduino All kinds of platforms.
Uno Learning kit for Arduino
SKU: AI2918QUICK OVERVIEW:
- All-in-one kit, a great starter kit for learning coding.
- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
3.5 TFT LCD Shield compatible without touch for Arduino
SKU: AI1497 ₹1,388.86 (₹1,177.00 + GST)
QUICK OVERVIEW:
Add to cart
Add to Compare
- Display size-3.5 Diagonal
- LCD type- TFT LCD
- TFT resolution- 320 x 480 pixels
- Touch -NO
5V Modbus RTU 1Channel Relay Module Input Optocoupler Isolation RS485 MCU for Arduino
SKU: AI3819 ₹345.74 (₹293.00 + GST)Product Name:1 Bit Modbus RTU Relay Module
Working Voltage: DC 5V
Working Current:1A
Work Temperature:-25℃~85℃
Work Humidity:5%~95%RH
Uno R3 Beginners Kit for Arduino Uno- SECONDRY KIT
SKU: AI0060Quick Review
- Great for Starting with Arduino Programming
- Variety of components are included in this pack to try out different projects.
- The kit comes with quality components assured .
- All-in-one kit, a great starter kit for learning coding.
- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
DSM501A PM2.5 Dust Sensor Module for Arduino
SKU: AI2456QUICK OVERBIEW:
| Supply voltage (V) | -0.3 ~+7 |
| Operating supply voltage (V) | 5 |
| Operating current (Max) | 90mA |
| Output mode | PWM pulse width modulation |
| Sensitivity | 15,000 / 283ml |
| Operating Temperature (C) | -10 ~ +65 |
| Storage temperature (C) | -20 ~ +80 |
| Settling time | Approximately 1 minute after the heater is switched on |
8 Channel 5V Solid State Relay Module Board OMRON for Arduino
SKU: AI2404 ₹1,053.74 (₹893.00 + GST)
8-channel 2 AMP Solid State Relay board.
Control 8 loads of up to 2 amps each at 120 V or 240 VAC.
Good for lighting, Holiday displays etc.
With 8 Solid State Relays: 2A at 100 to 240 VAC.(50/60 Hz).
Power supply: 5 V DC (160 mA)
Trigger Current: 2mA.
Trigger Voltage: 3.3V-5V.
Advanced Kit for Arduino
SKU: AI2917 ₹2,309.26 (₹1,957.00 + GST)QUICK OVERVIEW:
- All-in-one kit, a great starter kit for learning to code.
- Model Type: UNO Rev R3
- Microcontroller Chip: ATmega328
- Input Voltage(Recommended): 7-12V
- Operating Voltage: 5
- Analog I/O Pins: 6
- Digital I/O Pins: 14 (of which 6 provide PWM output)
4 x 18650 Lithium Battery Shield V8 V9 for Arduino ESP32 ESP8266 with On-Off Button
SKU: AI3248 ₹588.82 (₹499.00 + GST)QUICK OVERVIEW:
- Buttons: 1. Voltage Switch, 2. ON-OFF
- Working Temperature: -20 °C~70 °C
- Output Port: USB or Expansion port
- Output Parameters: 5V/3A or 3V/1A
- Conversion Efficiency: up to 95%
DC5-80V ESP8266 Wireless WIFI Relay Module 1 Channel ESP8266 MOD Wifi Development Board Power Supply for Arduino
SKU: AI3763
1 Channel relay
ESP8266 MOD inbuild
Power Supply:5-80 V
Switching Voltage (VAC):250@10A
Switching Voltage (VDC):30@10A
Add to cart
Add to Compare
5V Modbus RTU 8, Channels Relay Module, Input Optocoupler, Isolation RS485 MCU for, Arduino
SKU: AI3325 ₹980.58 (₹831.00 + GST)
Product Name:8 Bit ModbusRTU Relay Module
MCU: One STM8S103K
Working Voltage: DC 12 V
Work Temperature: -25~85.
Work Humidity:5%~95%RH.
Size:140*80*20mm
Cable for Arduino Nano (USB 2.0 A to USB 2.0 Mini B)-30cm
SKU: AI0072 ₹18.76 (₹15.90 + GST)Quick Overview
- Up to 480 Mbps data transfer rate.
- USB Type: Type-A to Mini-B
- Weight: 15 gm
- Length: 30 cm
- Exclusively designed for Arduino boards.
Arduino Uno/Mega USB Cable (USB A To B)- 50CM
SKU: AI0003 ₹32.69 (₹27.70 + GST)Quick Review:
- USB Type: Type-A to Type-B
- Weight: 25 gm.
- Length: 50 cm.
- Fully compatible with the PC.
- Aluminum under-Mold shield helps meet FCC requirements on KMI/RFI interference.
Cable for Arduino Nano (USB 2.0 A to USB 2.0 Mini B) 30cm – Black
SKU: AI0406 ₹32.92 (₹27.90 + GST)- Color: White & Black
- Cable Length: 30 Cm
- Wire Thickness: 4 mm
- Wire Material: PVC
- Core: 4
- Core Material: Copper
- Core Wire: 10-40, 12-40
Infrared IR Sensor Receiver Module for Arduino
SKU: AI2495 ₹20.41 (₹17.30 + GST)QUICK OVERVIEW:
- Dimension: 2.5 x 1.5 x 1.5 cm.
- Receiving angle: 90 °.
- Working voltage: 2.7 ~ 5.5V.
- Frequency: 37.9KHz
- Receiving range: 18m.
- Weight: 4 gm.
Speed Measuring Sensor Groove Coupler Module For Arduino
SKU: AI0144 ₹30.44 (₹25.80 + GST)
Speed Measuring Sensor Groove Coupler Module For Arduino Introducing the Speed Measuring Sensor Groove Coupler Module, specifically designed for Arduino...
Add to Compare
ESP32-WROOM-32U IOT Development Board Module for Arduino
SKU: AI0779 ₹569.94 (₹483.00 + GST)
Product: IoT Development Board
Model: ESP32-WROOM-32U
CPU: Xtensa dual-core 32-bit LX6 microprocessor
Antenna: external antenna connector (which needs to be connected to an external antenna)
Voltage: 3.6V
Current: 500mA
Frequency: 240 MHz
Add to Compare
Arduino Mega 2560 R3 Board
SKU: AI0025Quick Review:
- 54 digital input / output terminals (14 of which have programmable PWM outputs).
- 16 analog inputs.
- 4 UARTs (hardware serial ports).
- 16 MHz crystal clock.
- Operating voltage: 6 ~ 12v.
- Dimensions: 110 x 53 x 15 mm.
LilyPad Button Board Module For Arduino
SKU: AI0730 ₹20.65 (₹17.50 + GST)LilyPad is a wearable e-textile technology.
Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing.
Various input, output, power, and sensor boards are available.
4-20mA to 5V Converter for Arduino Industrial Sensor Interface Board
SKU: AI2144 ₹90.86 (₹77.00 + GST)QUICK OVERVIEW:
- Current Input support 4-20Ma & 0-20mA
- voltage output support 0-3.3V 0-5V 0-10V
- Weight: 12 g
- Wide supply voltage range, the output has multiple voltage ranges
- Zero and range can be adjusted
Transparent Acrylic Case Shell Enclosure Gloss Box For Arduino UNO R3
SKU: AI2860 ₹49.09 (₹41.60 + GST)QUICK OVERVIEW:
- For Arduino UNO R3 Development Board only.
- With screw copper pillar and installation instructions.
- To protect your little computer against damages, dust and scratches Clear Top and Bottom.
- This case provides easy access to all ports.
- It requires no tools for easy assembly and disassembly.
- Simply Clicks Together Enclosure.
L293D Motor Driver Shield Expansion Board for Arduino
SKU: AI0398 ₹141.60 (₹120.00 + GST)
Wide supply voltage: 4.5 V to 12 V.
Max supply current: 600 mA per motor.
The driver two holes of 3 mm dia.
Male burg-stick connectors for supply, ground and input connection.
Screw terminal connectors for easy motor connection.
High noise immunity inputs.
Add to Compare
Cable For Arduino Nano USB A to MINI B (Nickel Plated Connector)-1.2 M
SKU: AI2086 ₹42.72 (₹36.20 + GST)- USB Type: Type-A to Mini-B
- Weight: 100 gm.
- Length: 1.2 m.
- Nickel Plated Connector
- Exclusively designed for Arduino boards.
BMP180 Digital Barometric Sensor Module compatible with Arduino
SKU: AI2425 ₹31.62 (₹26.80 + GST)QUICK OVERVIEW:
- 1.8V to 3.6V Supply Voltage
- Low power consumption – 0.5uA at 1Hz
- I2C interface
- Max I2C Speed: 3.5Mhz
- Very low noise – up to 0.02hPa (17cm)
- Fully calibrated
- Pressure Range: 300hPa to 1100hPa (+9000m to -500m)
TB6612FNG Dual Motor Driver Module 1A for Arduino
SKU: AI0999 ₹147.50 (₹125.00 + GST)
Output current: Iout=1.2A(average) / 3.2A (peak)
Standby control to save power
CW/CCW/short break/stop motor control modes
Built-in thermal shutdown circuit and a low voltage detecting circuit
All pins of the TB6612FNG broken out to 0.1 spaced pins
Filtering capacitors on both supply lines
Infrared IR Wireless Remote Control Module Kit for Arduino
SKU: AI2496 ₹61.36 (₹52.00 + GST)QUICK OVERVIEW:
- Battery: CR2025 160mAh button battery
- Effective angle: 60°
- Sticking material: 0.125mmPET
- Effective life: 20,000 times
- Static current: 3uA – 5uA
- Dynamic current: 3mA – 5mA
Proto Screw Shield 1.0 For Arduino Uno
SKU: AI2581 ₹234.82 (₹199.00 + GST)QUICK OVERVIEW:
- Arduino terminal to provide the IO, port connection.
- 3.81 posts quality, reliable, convenient, durable.
- Combined with the Proto Shield, the middle can be used as a prototype expansion board.
- Double-sided PCB Prototyping extended area vias connecting the front sides can be welded components.
- The middle section can be placed small bread plate, convenient test extend
Pro Micro 5V 16M Mini Leonardo Microcontroller Development Board For Arduino
SKU: AI5253 ₹463.74 (₹393.00 + GST)- ATMEGA32U4 running in 5V / 16MHz
- Support Arduino IDE V1.0.1
- Micro USB interface programming on the board
- Four 10-bit ADC pin
- 12 digital I / O (5 PWM capability)
- Rx and Tx hardware serial connection
6Pin FTDI FT232RL FT232 Module For Arduino USB to TTL UART Serial Wire Adapter RS232
SKU: AI5247 ₹286.74 (₹243.00 + GST)- Product: 6Pin FTDI FT232RL FT232 Module For Arduino USB to TTL UART
- Connector type: USB To TTL RS232
- Input Supply voltage: 3.3 ~ 5V
- The cables provide a fast, simple way to connect devices with a TTL level serial interface to USB
ESP32 LoRa SX1278 0.96 Inch Blue OLED Display BT WiFi Module for Arduino
SKU: AI2755 ₹1,984.76 (₹1,682.00 + GST)QUICK OVERVIEW:
- Supports Sniffer, Station, softAP and Wi-Fi Direct modes
- Data rate: 150 Mbps @ 11n HT40,72 Mbps @ 11n HT20,54 Mbps @ 11g, 11 Mbps @ 11b
- Transmit power: 19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11n
- Receiver sensitivity up to – 98 dBm
- UDP continues to throughput by 135 Mbps
Tilt Switch Sensor Module For Arduino
SKU: AI0297 ₹26.55 (₹22.50 + GST)
Operating Voltage: 5v DC.
This module is Small and Simple to use.
Digital switch output (0 & 1)
High sensitivity
Completes the circuit when the module is tilted
LED lights up when tilt switch is activated
Add to Compare
Green Rotary Encoder Module for Arduino without Demo Code
SKU: AI3020 ₹61.36 (₹52.00 + GST)QUICK OVERVIEW:
- Product Name: Green Rotary Encoder Module for Arduino without Demo Code
- Type : Incremental Encoder.
- Cycles per revolution (CPR) : 20.
- Working voltage : 0 – 5V.
- Material : PCB + Brass.
- Mounting Nut Thread diameter: 6.6mm
4 Pin Female 11mm tall stackable Header Connector for Arduino(Pack of 5)
SKU: AI1420 ₹52.86 (₹44.80 + GST)- Product Name: 4 Pin Female 11mm tall stackable Header Connector for Arduino
- Pitch 2.54mm.
- Plastic height: 8.5mm
- Pin Length: 11mm
- Gender of Connector: Female
- Number of Pins: 4 Pin
- Type of Row: Single-Row
- Body Orientation: Straight
Tilt Sensor Vibration Alarm Vibration Switch Module for Arduino (3 PIN)
SKU: AI4269 ₹30.33 (₹25.70 + GST)
Operating voltage: 3.3 to 5VDC
Ball Rolling type of tilt sensor.
A Fixed bolt hole for easy installation
Add to Compare
Original Arduino Nano A000005
SKU: AI5850 ₹1,670.88 (₹1,416.00 + GST)Manufacturer: Arduino Officials
Operating Voltage (logic level): 5V
8 analog inputs ports: A0 ~ A7
14 Digital input / output ports: TX, RX, D2 ~ D13
1 pair of TTL level serial transceiver ports RX / TX
Using Atmel Atmega328P-AU MCU
There is a bootloader installed in it
Standard 0.1” spacing DIP (breadboard friendly).
Manual reset switch.
Mega +WiFi R3 Atmega2560+NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Arduino Mega
SKU: AI2756 ₹1,263.78 (₹1,071.00 + GST)QUICK OVERVIEW:
- It is a customized version of the classic ARDUINO MEGA R3 board. Full integration of Atmel ATmega2560 microcontroller and ESP8266 Wi-Fi IC, with 32 Mb (megabits) of flash memory, and CH340G USB-TTL converter on a single board! All components can be set up to work together or independently.
Multifunction Shield For Arduino Uno / Leonardo
SKU: AI3428 ₹133.34 (₹113.00 + GST)
Multifunction Shield For Arduino Uno / Leonardo.
- 10K adjustable precision potentiometer.
- 3 x Independent push buttons.
- Piezo buzzer.
- DS18B20 temperature sensor interface.
- LM35 temperature sensor interface.
- Infrared receiver interface.
6 Pin Female 11mm tall stackable Header Connector for Arduino-(Pack of 5)
SKU: AI1409 ₹52.63 (₹44.60 + GST)- Product Name: 6 Pin Female 11mm tall stackable Header Connector for Arduino
- Pitch 2.54mm.
- Plastic height: 8.5mm
- Pin Length: 11mm
- Gender of Connector: Female
- Number of Pins: 6 Pin
- Type of Row: Single-Row
- Body Orientation: Straight
12V Modbus RTU 4, Channels Relay Module, Input Optocoupler, Isolation RS485 MCU for, Arduino
SKU: AI3324 ₹539.26 (₹457.00 + GST)Product Name:4 Bit ModbusRTU Relay Module
Working Voltage:DC 12V
Working Current:1A
Work Temperature:-25℃~85℃
Work Humidity:5%~95%RH
Size:78*78*20mm
USB To Serial Adapter Module USB TO TTL RS232 Arduino Cable With CTS RTS
SKU: AI2106 ₹153.40 (₹130.00 + GST)Chipset: FT232RL
Output Voltage: 5V
Connector Type: USB Type-A male to 6-way SIL, 0.1″ connector
TTL Levels: 3.3V
USB Compatibility: USB 2.0 full speed compatible
Cable Length: 1.0m
Data Transfer Rate: Up to 3 M baud
DC5V/8-80V ESP8266 Wireless WIFI Relay Module 2 Channel ESP-12F Wifi Development Board Power Supply for Arduino
SKU: AI3764 ₹561.68 (₹476.00 + GST)2 Channel relay
ESP8266 12F WiFi module Inbuild
Power Supply:5-80 V
Switching Voltage (VAC):250@10A
Switching Voltage (VDC):30@10A
DC3.3V-5V UV Detection Sensor Module Ultraviolet Ray Module For Arduino Sensor
SKU: AI1068 ₹377.60 (₹320.00 + GST)
Operating voltage: DC 3.3-5V
Output voltage: DC 0-1V
Test accuracy: ±1UV INDEX
Current: 0.06mA (typ), 0.1mA (max)
Response wavelength: 200nm-370nm
Transparent Acrylic Case Shell Enclosure Gloss Box For ESP8266 & ESP32 Modules
SKU: AI8156 ₹137.85 (₹116.82 + GST)Quick Overview:
- Product Name: Transparent Acrylic Case Shell Enclosure Gloss Box For ESP8266 & ESP32 Modules
- Designed specifically for ESP8266 and ESP32 development boards
- Made from transparent acrylic material for a clean and professional look
- Protects the module from dust, scratches, and accidental damage
- Lightweight and compact enclosure for easy portability
- Glossy finish enhances appearance and visibility of internal components
- Precise cutouts for USB ports, pins, buttons, and connectors
- Easy to assemble with screw-based or slot-fit design
Free Shipping
On orders above ₹999
COD Available
Min. order ₹250 for COD
GST Invoice
Available on all orders
1,50,000+ Orders
Delivered across India
Expert Support
Toll Free: 1800 209 0998
Product categories
- 3D Printers and Parts (379)
- Batteries, Chargers and Accessories (811)
- Clearance Sale (0)
- Development Boards (438)
- DIY Learning and Robot Kits (117)
- Drone Parts (1364)
- EBike parts (140)
- Electronic Components (783)
- Electronic Modules and Displays (1201)
- FPV Freestyle Mid/High KV Drone Motors (0)
- IoT and Wireless (544)
- Mechanical Parts and Workbench Tools (241)
- Motors & Drivers & Pumps & Actuators (583)
- Sensor Modules (639)