Original Arduino Mega 2560 ATmega2560 MCU Rev3 A000067
SKU: AI5849 ₹3,004.28 (₹2,546.00 + GST)
Manufacturer: Arduino Official
Official Arduino Board with 3-Month brand Warranty
ATmega16U2 instead 8U2 as USB to serial converter
Stronger RESET circuit
5V operating voltage
40mA DC current per I/O pin
256KB flash memory of which 8KB used by bootloader
8KB SRAM
4KB EEPROM
Add to Compare
Arduino Nano Every with Headers
SKU: AI1991 ₹1,433.70 (₹1,215.00 + GST)
Overview
Add to Compare
- Chip: ATMEGA4809
- Clock Speed: 20MHz
- Memory: 48KB
- Interface: USB, SPI, 12C, UART
- USB Vin: 5V
- Input VIN : 6-21V
- Operating Voltage: 5V
- I/O PINS: Digital PIN 14, PWM 5, Analog 8
- Dimensions: 18x45mm
Nano Board R3 with FT232 Chip without USB Cable Compatible with Arduino (Unsoldered)
SKU: AI0455 ₹729.24 (₹618.00 + GST)- Microcontroller: ATmega328
- Operating Voltage (logic level): 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 8
- DC Current per I/O Pin: 40mA
- Flash Memory: 32KB (ATmega328) of which 2 KB used by bootloader
- SRAM: 2KB (ATmega328)
- EEPROM: 1KB (ATmega328)
5V Modbus RTU 4 Channels Relay Module, Input Optocoupler, Isolation RS485 MCU for, Arduino
SKU: AI3323 ₹590.00 (₹500.00 + GST)
QUICK OVERVIEW:
- Product Name:4 Bit ModbusRTU Relay Module
- Working Voltage:DC 5V
- Working Current:1A
- Work Temperature:-25℃~85℃
- Work Humidity:5%~95%RH
- Size:78*78*20mm
ESP32-SOLO-1 IoT Development Board Module for Arduino
SKU: AI0776 ₹1,505.00 (₹1,275.42 + GST)
Model: ESP32-SOLO-1
Product: IoT Development board
Frequency: 2.4 GHz to 2.5 GHz
Operating Supply Voltage: 5 V
Bluetooth: Sensitivity 30.8% PER –97dBm
Operating Temperature: –40 °C ~ +105 °C
Add to Compare
SmartElex GPS Data Logger Shield for Arduino
SKU: AI1024 ₹1,711.00 (₹1,450.00 + GST)
The multi-GNSS engine for GPS, GLONASS, Galileo, and QZSS.
Embedded patch antenna.
Automatic antenna switching function.
High sensitivity: -167dBm @Tracking, -149dBm @Acquisition
99 acquisition channels, 33 tracking channels
Balloon mode, for high altitude up to 80km
Support DGPS, SBAS (WAAS/EGNOS/MSAS/GAGAN)
Great anti-jamming performance due to multi-tone active interference canceller
Support SDK command developed by Quectel
Add to Compare
Nano V3.0 CH340 Chip with Mini USB Cable Compatible with Arduino (Unsoldered)
SKU: AI6241 ₹178.60 (₹151.36 + GST)- Operating Voltage (logic level): 5V
- With Mini USB
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
Mega 2560 ATmega2560-16AU Board plus USB Cable compatible with Arduino
SKU: AI6228 ₹1,064.00 (₹901.69 + GST)- Mega 2560 ATmega2560-16AU Board plus USB Cable
- 54 Digital I/O terminals (14 of which have programmable PWM outputs).
- 16 Analog Inputs.
- 4 UARTs (hardware serial ports).
- 16 MHz crystal clock.
- Operating voltage: 6 ~ 12v.
- Dimensions: 110 x 53 x 15 mm.
USB to DC Cable (Power Cable for Arduino Uno and Mega )- 50cm
SKU: AI0445 ₹116.82 (₹99.00 + GST)- Color – Black
- Cable Length – 50 cm
- Wire Thickness – 3.5 mm
- Wire Material – LD
- Core – 2
- Core Wire 12-40
- Core Material – Copper
5V Modbus RTU, 1Channel Relay Module, Input Optocoupler, Isolation RS485 MCU for, Arduino
SKU: AI4301 ₹442.50 (₹375.00 + GST)- Product Name:1 Bit Modbus RTU Relay Module
- Working Voltage: DC 5V
- Working Current:1A
- Work Temperature:-25℃~85℃
- Work Humidity:5%~95%RH
AD8232 Analog Front End Sensor Module Kit for Arduino
SKU: AI2457 ₹509.62 (₹431.88 + GST)- QUICK OVERVIEW:
- Designed to extract, amplify, and filter small analog signals.
- Leads-Off Detection.
- Shutdown Pin.
- LED Indicator.
- Analog Output.
- 3.5 mm Jack for Sensor Pad Connection.
Original Arduino Nano 33 IOT
SKU: AI2005 ₹2,469.00 (₹2,092.37 + GST)- Microcontroller: SAMD21 Cortex-M0+ 32bit low power ARM MCU (Datasheet)
- Radio module: u-blox NINA-W102
- Secure Element: ATECC608A
- IMU: LSM6DS3
- Clock Speed: 48MHz
- Operating Voltage: 3.3V
Original Arduino GIGA R1 WiFi
SKU: AI2004 ₹6,299.01 (₹5,338.14 + GST)
The Original Arduino GIGA R1 WiFi is designed for ambitious makers who want to step up their game. It levels the playing field for gamers, artists, sound designers, and anyone coming to the tech world with big ideas on a budget – because it packs advanced features into an accessible component, with the same form factor
Add to Compare
Arduino zero micro-controller boards
SKU: AI2002 ₹116.82 (₹99.00 + GST)
QUICK OVERVIEW:
Add to Compare
- Product: Arduino zero
- This official Arduino board
- Best for your school & college projects
- Clock speed: 48 MHz
- The board is powered by Atmel’s
Arduino Uno Mini Limited Edition
SKU: AI2001 ₹116.82 (₹99.00 + GST)
QUICK OVERVIEW:
Add to Compare
- Microcontroller: ATmega328P
- Circuit operating voltage: 5V
- The input voltage ranges from 6v to 20V
- Digital I/O Pins: 14
- Analog i/p pins are 6.
- 1 kb of EEPROM memory
- USB connector: USB-C
Arduino Tiny Machine Learning Kit
SKU: AI2000 ₹116.82 (₹99.00 + GST)
QUICK OVERVIEW:
Add to Compare
- Powerful Arduino Nano 33 BLE Sense LITE Board inside
- 32-bit ARM Cortex-M4 CPU running at 64 MHz
- Microcontroller: nRF52840
- Security: ECC608 crypto chip
- High-quality OV7675camera module inside
Arduino Starter Kit with 170 Pages Project Book
SKU: AI1999 ₹116.82 (₹99.00 + GST)
QUICK OVERVIEW:
Get started with electronics quickly and easily without any prior experience because with this kit you will get an Official Arduino pictorial Project book
Add to Compare
Arduino Pro Mini 328 – 3.3V/8 MHz
SKU: AI1998 ₹116.82 (₹99.00 + GST)
QUICK OVERVIEW:
Add to Compare
- Product: Arduino Pro Mini 328 – 3.3V/8 MHz
- 3.3V regulator
- Max 150mA output
- Over current protected
- DC input 3.3V up to 12V
Arduino Portenta Vision Shield – LORA
SKU: AI1997 ₹5,779.64 (₹4,898.00 + GST)
Overview
Add to Compare
- Camera: Himax HM-01B0 camera module
- Image Sensor: High sensitivity 3.6μ BrightSense pixel technology
- Microphone: 2 x MP34DT05
- Connectivity: 868/915MHz ABZ-093 LoRa Module with ARM Cortex-M0+
- Resolution: 320 x 320 active pixel resolution with support for QVGA
Arduino Portenta Machine Control Unit
SKU: AI1996 ₹37,999.54 (₹32,203.00 + GST)
Overview
Add to Compare
- Shorter Time-To-Market
- Give new life to existing products
- Add connectivity for monitoring and control
- Tailor it to your need, each I/O pin can be configured
- Make equipment smarter to be ready for the AI revolution
Arduino Nicla Voice Original Arduino Boards
SKU: AI1995 ₹9,499.00 (₹8,050.00 + GST)
Overview
Add to Compare
- Powerful processor with integrated Deep Neural Networks in a tiny form factor (22.86 x 22.86 mm)
- Integrated microphone, magnetometer and smart 6-axis IMU
- Onboard Bluetooth® Low Energy connectivity
- Add speech recognition capabilities to your projects
Arduino Nicla Vision
SKU: AI1994 ₹11,949.86 (₹10,127.00 + GST)
Overview
Add to Compare
- STMicroelectronics STM32H747AII6 Dual ARM® Cortex® – M7 core up to 480 Mhz + M4 core up to 240 Mhz
- Memory: 2MB Flash / 1MB RAM,16MB QSPI Flash for storage
- Interface: USB interface with debug functionality
- Wi-Fi and Bluetooth® Low Energy connectivity
- Supports Micro Python
Arduino Nicla Sense ME
SKU: AI1993 ₹6,700.04 (₹5,678.00 + GST)
Overview
Add to Compare
- Microcontroller: 64 MHz Arm® Cortex M4 (nRF52832)
- Connectivity: Bluetooth® 4.2
- Interface: USB interface with debug functionality
- Tiny size, packed with features
- Low power consumption
- Add sensing capabilities to existing projects
- Weight: 2g
Arduino Nano RP2040 Connect with Header
SKU: AI1992 ₹2,800.14 (₹2,373.00 + GST)
Overview
Add to Compare
- 133MHz 32bit Dual Core Arm Cortex-M0+ Processor
- 264kB on-chip SRAM
- U-Blox Nina W102 WiFi/Bluetooth Module
- 240MHz 32bit Dual Core Xtensa LX6
- 520kB on-chip SRAM
Arduino Nano 33 IOT with Header
SKU: AI1990 ₹2,199.52 (₹1,864.00 + GST)
Overview
Add to Compare
- Microcontroller: SAMD21 Cortex-M0+ 32bit low power ARM MCU (Datasheet)
- Radio module: u-blox NINA-W102
- Secure Element: ATECC608A
- IMU: LSM6DS3
- Clock Speed: 48MHz
- Operating Voltage: 3.3V
Arduino MKR1000 WIFI without headers
SKU: AI1989 ₹3,683.96 (₹3,122.00 + GST)
Overview
Add to Compare
- MICROCONTROLLER: SAMD21 Cortex-M0+ 32bit low power ARM MCU
- This Arduino MKR1000 WIFI without headers
- 5V board power supply
- Supports Li-Po cell, 3.7V, 700mAh minimum
- 8 digital I/O pins
Arduino MKR Zero Original Arduino Boards
SKU: AI1988 ₹2,623.28 (₹2,223.12 + GST)
Overview
Add to Compare
- Microcontroller: SAMD21 Cortex-M0+ 32bit low power ARM MCU
- Board Power Supply (USB/VIN): 5V
- Supported Battery(*): Li-Po single cell, 3.7V, 700mAh minimum
- DC Current for 3.3V Pin: 600mA
- Comes with a micro SD card holder
Arduino MKR WAN 1300 (LORA Connectivity)
SKU: AI1987 ₹3,905.80 (₹3,310.00 + GST)
Overview
Add to Compare
- Microcontroller: SAMD21 Cortex-M0+ 32bit low power ARM MCU
- Clock Speed: 32.768 kHz (RTC), 48 MHz
- Characteristic Crypto Chip: ECC508
- The Murata CMWX1ZZABZ LoRa module
- Carrier Frequency: 433/868/915 MHz
- Operating Voltage: 3.3v
Arduino MKR Vidor 4000
SKU: AI1986 ₹5,842.18 (₹4,951.00 + GST)
Overview
Add to Compare
- FPGA: Intel® Cyclone® 10CL016
- PCI: Mini PCI Express port with programmable pins
- Camera Connector: MIPI camera connector
- Microcontroller: SAMD21 Cortex®-M0+ 32bit low power ARM MCU
- Radio module: u-Blox NINA-W102 (datasheet)
- Board Power Supply :(USB/VIN) 5V
- All pins are PWM pins
- MIPI camera connector
- Mini PCI Express port with programmable pins
- Full-Speed USB Device and embedded Host
Arduino MKR Therm Shield
SKU: AI1985 ₹4,428.54 (₹3,753.00 + GST)
The MKR Therm Shield is a great addon for MKR family boards, and allows you to connect high-quality thermocouples, and can calculate temperatures from -200°C to +700°C. An ideal solution to use for ovens, freezers, smokers, and similar environments.
Arduino MKR Mem Shield
SKU: AI1984 ₹1,923.40 (₹1,630.00 + GST)
Are you developing a complex IoT device with your MKR board and running out of memory? Add Flash memory and microSD storage to your MKR board, and allow over-the-air updates, with the Arduino MKR MEM Shield.
Arduino MKR GPS Shield
SKU: AI1983 ₹3,294.56 (₹2,792.00 + GST)
The MKR GPS Shield is based on the u-blox SAM-M8Q GNSS (Global Navigation Satellite System) module. It can be used to add GPS to any of your MKR boards. To use this shield, you can refer to the documentation of the MKR GPS library.
Arduino MKR ENV Shield Rev2
SKU: AI1982 ₹3,393.68 (₹2,876.00 + GST)
Overview
These sensors are of the latest generation and measure:
Add to Compare
- Atmospheric pressure
- Temperature and humidity
- Light intensity (in LUX, max 650)
Arduino MKR Connector Carrier (Grove Compatible)
SKU: AI1981 ₹1,923.40 (₹1,630.00 + GST)
Want to connect several Seeed Studio Grove modules to your Arduino board? The Arduino MKR CONNECTOR CARRIER is the perfect companion for Arduino MKR boards and a Grove ecosystem.
Arduino MKR CAN Shield
SKU: AI1980 ₹3,167.12 (₹2,684.00 + GST)
The MKR CAN Shield is based on the MCP2515 CAN controller and the TJA1049 CAN transceiver. Mounting this shield on a MKR family board allows you to connect to existing CAN systems. It also features the TPS54232 buck converter from Texas Instruments.
Add to Compare
Arduino MKR 485 Shield
SKU: AI1979 ₹3,232.02 (₹2,739.00 + GST)
Overview
Add to Compare
- Input Voltage:7-24V
- Interface Serial
- Compatibility MKR size
- Transceiver MAXIM MAX3157
- Buck converter Texas Instruments TPS54232
- Switchable onboard termination resistor
Arduino Leonardo without Headers
SKU: AI1978 ₹1,499.78 (₹1,271.00 + GST)
ATmega32U4 Microcontroller
Input Voltage: 7-12V
20 Digital I/O Pins
micro USB connection
Add to Compare
Arduino Edge Control
SKU: AI1977 ₹24,299.74 (₹20,593.00 + GST)
Overview
Add to Compare
- Operating Supply Voltage: 12 V.
- Dimensions: 104 mm x 86 mm.
- Interface Type: I2S, Serial, USB.
- Maximum Operating Temperature: + 85 C.
- Minimum Operating Temperature: – 40 C.
Arducam Multi-camera adapter board for Arduino SPI Mini Camera
SKU: AI1931 ₹2,096.86 (₹1,777.00 + GST)
Overview
Add to Compare
- Connects 4 Different Camera to Arduino
- Built-in Micro USB Power Jack
- Communicates to Arduino via I2C and SPI
Arducam 2 MP Mini Module Camera Shield with OV2640 Lens for Arduino
SKU: AI1930 ₹3,276.86 (₹2,777.00 + GST)Quick Overview:
- Product Name: Arducam 2MP Mini Module Camera Shield with OV2640 Lens for Arduino
- Based on OV2640 2MP Camera
- Supports SPI Communication Protocol
- All I/O Ports Are 5/3.3V Tolerant
- Small Form Factor
- Compatible With Arduino
Arducam Mini Module Camera Shield 5 MP OV5642 Camera Module for Arduino
SKU: AI1929 ₹5,568.21 (₹4,718.82 + GST)
Overview
Add to Compare
- Based on OV5642 5MP Camera
- Supports SPI Communication Protocol
- All I/O Ports Are 5/3.3V Tolerant
- Small Form Factor
- Compatible With Arduino
Adafruit METRO 328 Fully Assembled – Arduino IDE compatible – ATmega328
SKU: AI1799 ₹2,619.60 (₹2,220.00 + GST)
Overview
Add to Compare
- Model: Adafruit METRO 328 Fully Assembled
- Processor: ATmega328
- RAM: 2 KB
- Flash Memory: 32 KB
- Operating Power: 5 V but it can easily be converted it to 3.3 V
Adafruit Trinket M0 – for use with CircuitPython & Arduino IDE
SKU: AI1795 ₹1,296.82 (₹1,099.00 + GST)
Overview
Add to Compare
- Same size, form factor, and pinout as a classic Trinket
- Updating ATtiny85 8-bit AVR for ATSAMD21E18 32-bit Cortex M0+
- 256KB Flash – 32x as much as 8 KB on ATtiny85
- 32 KB RAM – 64x as much as 512 bytes on ATtiny85
- 48 MHz 32-bit processor – 6x as fast as ATtiny85 (not even taking into account 32-bit speedups)
- Native USB supported by every OS
Adafruit Assembled Data Logging shield for Arduino
SKU: AI1783 ₹2,181.82 (₹1,849.00 + GST)
Overview
Add to Compare
- Model: Adafruit Assembled Data Logging shield
- SD card interface: FAT16 or FAT32
- Onboard regulator: 3.3 V
- Real time clock (RTC) keeps the time going even when the Arduino is unplugged
Adafruit Metro Mini 328 – Arduino-Compatible – 5V 16MHz
SKU: AI1769 ₹2,004.82 (₹1,699.00 + GST)
Overview
Add to Compare
- 5V logic with 3.3V compatible inputs can be converted to a 3.3V logic operation
- 32KB Flash Memory – 0.5K for bootloader
- Four indicator LEDs
- Easy reprogramming
- 31.5KB available after bootloading
- 16MHz Clock Speed
Adafruit FLORA – Wearable electronic platform: Arduino-compatible – v3
SKU: AI1768 ₹2,358.82 (₹1,999.00 + GST)
Overview
Add to Compare
- Input Voltage:3.5-16 v
- Chipset:ATmega32u4
- Clock speed:8 Mhz
- Can power common 3.3v modules and sensors
- Perfect for beginners
DC5-80V ESP8266, Wireless WIFI Relay, Module 1 Channel ESP-12F Wifi Development, Board Power Supply for, Arduino
SKU: AI1320 ₹416.00 (₹352.54 + GST)
DC5-80V ESP8266, Wireless WIFI Relay, Module 1 Channel ESP-, 12F Wifi Development, Board Power Supply for, Arduino:
Add to Compare
- Power Supply:5-80 V
- Switching Voltage (VAC):250@10A
- Switching Voltage (VDC):30@10A
Voltage Divider Module for boards compatible with Arduino
SKU: AI1125 ₹76.70 (₹65.00 + GST)
Extern Voltage Interface and Grove Interface
Easy to use
Can adjust the gain.
Add to Compare
Wemos TTGO Xi 8F328P-U Board For Arduino Nano V3.0 Promini
SKU: AI1116 ₹507.40 (₹430.00 + GST)
It comes with USB and is more convenient to use.
The 8F328D can be powered by 3V3 and 5V, operating at 16M frequencies with excellent levels of compatibility.
Built-in high precision RC, without external crystal oscillator, can be stable operation.
Less peripheral parts, simple circuit design.
Add to Compare
WT588D-16P Voice Sound Audio Player Module DC 2.8V-5.5V for Arduino
SKU: AI1114 ₹277.30 (₹235.00 + GST)
Module package (with FLASH memory and peripheral circuits) have DIP16, DIP28, chip packaging has DIP18, SSOP20, and LQFP32 form.
Built 13Bit/DA converter, and 12Bit/PWM output.
PWM output can directly drive 0.5W/8Ω speakers, push-pull current abundant support DAC / PWM output of two ways.
Support for loading WAV audio formats.
USB download mode, support for online download / offline download.
Add to Compare
ENC28J60 Ethernet Shield for Arduino Nano 3.0 RJ45 Webserver Module
SKU: AI0997 ₹790.60 (₹670.00 + GST)
Microchip's ENC28J60 ethernet / HR911105A
Direct plug puzzle board
No soldering needed.
Add to Compare
ESP32-WROOM-32UE Development Board Module for Arduino
SKU: AI0780 ₹1,497.00 (₹1,268.64 + GST)
Product: IoT Development Board
Model: ESP32-WROOM-32UE
CPU: Xtensa dual-core 32-bit LX6 microprocessor
Antenna: external antenna connector (which needs to be connected to an external antenna)
Voltage: 3.6V
Current: 500mA
Frequency: 240 MHz
Add to Compare
ESP32-WROOM-32E Development Board Module for Arduino
SKU: AI0778 ₹1,643.00 (₹1,392.37 + GST)
Product: Development Board
Model: ESP32-WROOM-32E
CPU: Xtensa dual-core 32-bit LX6 microprocessor
Antenna: On board Antenna
Frequency: 240 MHz
Voltage: 3.6V
Current: 500mA
Add to Compare
Espressif ESP32-WROOM-32D IoT Development Board Module for Arduino
SKU: AI0777 ₹1,497.00 (₹1,268.64 + GST)
QUICK OVERVIEW
Add to Compare
- Product: Development Board
- Model: ESP32-WROOM-32D
- CPU: Xtensa dual-core 32-bit LX6 microprocessor
- Antenna: On board Antenna
- Frequency: 240 MHz
- Voltage: 3.6V
- Current: 500mA
Arduino Frequency Counter Kit with 16×2 LCD Display
SKU: DIY020 ₹1,262.60 (₹1,070.00 + GST)
Model number: GM1602A
Resolution: 16*2
Operating temperature: -20 to 70℃
Pins: 16
Display Size: 1602
Add to Compare
Free Shipping
On orders above ₹999
COD Available
Min. order ₹250 for COD
GST Invoice
Available on all orders
1,50,000+ Orders
Delivered across India
Expert Support
Toll Free: 1800 209 0998
Product categories
- 3D Printers and Parts (379)
- Batteries, Chargers and Accessories (811)
- Clearance Sale (0)
- Development Boards (438)
- DIY Learning and Robot Kits (117)
- Drone Parts (1364)
- EBike parts (140)
- Electronic Components (783)
- Electronic Modules and Displays (1201)
- FPV Freestyle Mid/High KV Drone Motors (0)
- IoT and Wireless (544)
- Mechanical Parts and Workbench Tools (241)
- Motors & Drivers & Pumps & Actuators (583)
- Sensor Modules (639)