Main Features: SIYI AI Tracking Module II 10T Computing Power Human Vehicle Multi-Target Recognition Anti-Lost
1.10T computing power;
2.Any Object Recognition
3. Enhanced AI Recognition (License Plate, Insulator, Thermal Imaging)
4. Enhanced AI Follow
This encoder is featured and developed for the series of Orange planetary DC gear motors. The encoder are tested for its precise output and robustness in all electronic as well as environmental parameters listed. So If you wish to add feedback to older or new gear motors this encoder will do the trick as long as your Motor has a long back shaft.
Robust & reliable laser measure with green laser for excellent visibility
Ideal for rough construction work due to 1.5 meter drop resistance, IP65 protection, and shock-absorbing rubber casing
The Laser measure has an Intuitive user interface with additional supportive features (favourite button, colour display, help function) which makes handling convenient.
Easy to install.
Flow range:10-200L/min
Sensor: Hall effect
Maximum current:15 mA (DC 5V)
Working voltage range: DC 3.5-12 V
Load capacity: ¡Ü10 mA (DC 5V)
This HY502 series of RFID reader/writer modules are based on non-contact card reader ASCI chip compatible with ISO14443 standard.
It uses 600nm CMOS EEPROM technology, supports ISO14443 type A protocol, and also supports the MIFARE standard encryption algorithm.
Number of elements: 16 (4×4)View Angle: X direction = 44.2°, Y direction = 45.7°Object temperature Detection range: 06H:5~200°CReference temperature Detection rang: 5~45°C
Communications: I2C
Can detect the fire flame or the wavelength at 760 nm to 1100 nm
Test flame lighters distance of 80cm, the larger the flame, the greater the distance test
The detection angle of 60 degrees, the flame spectrum particularly sensitive
Sensitivity adjustable.
8 sensor pairs spaced 16mm.
12V input power
Onboard Mode and a Select button for instant configuration of LSA08
LCD display unit showing 8 sensors analog value with bar chart and line position.
Simple Auto-Calibration function to the line following surface.
Low current consumption (typically 26mA)
Works on glossy or reflective surface
Refresh rate up to 200Hz.
Operating voltage: 4.5 V to 6 V DC
Measurement of the range from 0-2000 parts per million (PPM)
Resolution of 1 PPM 0-2000 parts per million (PPM)
Accuracy of 200 PPM
A warm – Operating time 3 minutes
Response time <90s
Output 9 mV to 13 mV in 21%O²
Measurement Range 0 – 100 Vol.% O²
Response Time <15 s
Excellent signal stability
Accurate and reliable
No external power supply
Consists of infrared filters, thermistors and other components.
Packaged by TO-46 Made of metal.
High reliability.
High sensitivity.
Fast response.
5μm Long-wave pass filter