QUICK OVERVIEW:
Form Color : Purple
Working Voltage:3.3V
QUICK OVERVIEW:
QUICK OVERVIEW:
QUICK OVERVIEW:
QUICK OVERVIEW:
QUICK OVERVIEW:
QUICK OVERVIEW
Low noise operation.
Small fog particles.
High stability.
Driving Voltage: DC 3-12V.
High Conversion Efficiency.
Low Impedance Stable Waveform.
QUICK OVERVIEW:
MH-Z19C NDIR Infrared Carbon Dioxide Sensor Module:
| arget: | H2S |
| Model: | MQ136 |
| Detection range: | 1-200ppm |
| Detection principle: | Semiconductor |
| Characteristics: | Good sensitivity to H2S |
| Size: | φ19×24.2 |
| Working conditions: | Loop Voltage:5±0.1V Heater Voltage:5±0.1V Heater consumption:≤950mW |
Has a signal output instruction
When the output valid signal is high, the light goes out.
The sensitivity is adjustable (fine-tuning)
The wide detection range of vibration, no direction
With mounting holes, firmware installation is flexible and convenient.
QUICK OVERVIEW
QUICK OVERVIEW:
Specification:
High-quality photosensitive sensor module/light module designed for Arduino applications.
The photoresistor resistance is typically less than 80Ω under full light conditions.
In complete darkness, the dark resistance exceeds 20MΩ, ensuring reliable light detection.
QUICK OVERVIEW: SCT-013-025 Non-invasive Split Core Current Transformer AC current sensor 25A
Supply voltage range from 4.75VDC to 5.25VDC.
Temperature compensated over -40°C to 125°C.
Pressure range from 0KPa to 10KPa.
The sensitivity of 450mV/kPa.
QUICK OVERBIEW:
| Supply voltage (V) | -0.3 ~+7 |
| Operating supply voltage (V) | 5 |
| Operating current (Max) | 90mA |
| Output mode | PWM pulse width modulation |
| Sensitivity | 15,000 / 283ml |
| Operating Temperature (C) | -10 ~ +65 |
| Storage temperature (C) | -20 ~ +80 |
| Settling time | Approximately 1 minute after the heater is switched on |
Voltage: 5V
The photo interruption module triggers a signal whenever the light is blocked between the opening of the sensor.
Water Flow Sensor (Sea) YF-B9 Flowmeter G3/4 2-50L/min 5-24V:
Detection depth: 48mm
Power: 2.0V ~ 5.0V
Dimension: 19.0mm * 63.0mm
Mounting holes size: 2.0mm
Fast response characteristics
Mounting holes to facilitate fixed installation
The probe can plug design for easy testing.
Signal light indicates the output
Dual signal output (analog output, and TTL-level output)
TTL output valid signal is low; (low output signal light, can be accessed by the microcontroller IO port)
On orders above ₹999
Min. order ₹250 for COD
Available on all orders
Delivered across India
Toll Free: 1800 209 0998