Wide Working Voltage Range: DC 4.5V- 20V
Current Drain: <60uA
Detection Angle: <140°
Detection Distance: 3 to 7m (can be adjusted)
Blockade time: 2.5s (Default)
Work temperature: -20- 80°C
The width of the optical coupling slot: 10mm
With a signal output indication.
Single signal output
The circuit board output switch!
The output valid signal is low.
Heating Material: PTC Thermistor
Shell Material: Aluminum
Lead wire: Silicone Line
Voltage: 12V
Power: 30W
Surface Dry Heating Temperature: 220ºC
Good electrical characteristics
Different base materials, sizes, and connections
Monitoring electrode with foam tape and radiolucent stud.
ECG Electrode with convenient abrader.
ECG Electrode for monitoring applications requiring high adhesion.
Adhesive foam tape backing and proprietary sticky gel ensure excellent skin contact.
S49E hall sensor
Features wide-range voltage comparator LM393.
Signal output indicator.
Analog / Digital output
Output Channel: 1
Power Supply: 3.3/5V
Built in a potentiometer for sensitivity control.
Onboard signal output indication, output effective signal is high, at the same time the indicator light up, the output signal can directly connect to microcontroller IO.
Detection angle about 60 degrees, the flame spectrum especially sensitive.
The flame of the most sensitive sensors flames, the regular light is also a response, generally used for fire alarm purposes.
Heating voltage: 5±0.2V
Working current: 5-10mA
The detection concentration range: PH0-14
The detection range of temperature: 0-60 centigrade
The response time: ≤ 5S
Stability time: ≤ 60S
Power consumption: ≤ 0.5W
Designed to extract, amplify, and filter small biopotential signals.
Leads-Off Detection.
Shutdown Pin.
LED Indicator.
Analog Output.
5 mm Jack for Biomedical Pad Connection.
Power supply voltage: DC5 ± 2V
Sensitivity: 0.5V / (0.1mg / m3)
The minimum detection level of particles: 0.8 m
Clean air voltage: 0.9V typ.
Low consumption current (Icc: MAX. 20 mA)
The presence of dust can be detected by the photometry of only one pulse
Enable to distinguish smoke from house dust
QUICK OVERVIEW:
Power supply voltage of 2.5 V ~ 5 V
Low power consumption
Wide detection range: 240 nm to 370 nm
Wide Angle: 130 degrees
Schottky type photosensitive diode
Good linear response
High sensitivity
Product: Sound Detection Sensor Module
Operating voltage 3.3V-5V
Signal output indication
Single channel signal output
Light weight
QUICK OVERVIEW
QUICK OVERVIEW
Detection Method: On-beam
Detection Distance: 5 meters (±10%)
Detecting Objects: Opaque objects
Working Voltage: AC and DC universal, 12~240V
Output Mode: AC and DC universal five-wire relay output, normally open + normally closed
Housing Material: ABS
Cord length: 40 cm.
3-lead line: buckle
QUICK OVERVIEW:
Operating voltage (v): 4.2 ~ 6 VDC
Current consumption: ≤75mA
Verification Speed: 0.2 sec
Scanning Speed: 0.3 sec
Character file size: 256 bytes
Template size: 512 bytes
Low noise
Low power consumption
Frequency Range: 50 – 20KHz
Microphone sensitivity 56 – 58DB
Multi-Channel
Contactless transmission of data and supply energy (no battery needed)
Operating distance: Up to 1 to 5 cm (Depending on Antenna Geometry)
Operating frequency: 125KHz
Data transfer: 106 kbit/s
Data integrity: 16 Bit CRC, parity, bit coding bit counting
Anticollision
QUICK OVERVIEW:
Useful For: TEC1-12706 Thermoelectric Cooler Peltier.
Length (mm): 69.
Width (mm): 69.
Height (mm): 4
QUICK OVERVIEW:
QUICK OVERVIEW:
Operating Voltage: 3.3V to 5V
Diameter: 4mm
Length: 35mm
Output Format: digital switching outputs (0 and 1)
QUICK OVERVIEW:
QUICK OVERIVEW:
Input Current : 0-30A
Output Mode: 0-1V @ 30mA
Frequency: 50HZ-150KHZ
Opening Size: 13 x 13mm/ 0.5″ x 0.5″(L*W)
Output Plug 3.5mm
Dielectric Strength 6000V AC/1min
Suitable for lighting equipment, AC motors, air compressors, monitoring, current measurement, and protection
Meet UL94-V0 flame retardant properties
QUICK OVERVIEW:
QUICK OVERVIEW:
Maximum effective distance up to 150mm
Less than 100ms decoding time
Support external antenna
Uart interface
Support EM4100 compatible read-only or read/write tags
Small outline design
Form Color : Purple
Working Voltage:3.3V
Low-noise analog signal path
5 µs output rise time in response to step input current
Small footprint, low-profile SOIC8 package
2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8
Supply Voltage: 4.5V~5.5V DC
Measure Current Range: 30A
Sensitivity: 100mV/A
QUICK OVERVIEW:
QUICK OVERVIEW:
QUICK OVERVIEW:
QUICK OVERVIEW:
QUICK OVERVIEW:
QUICK OVERVIEW:
QUICK OVERVIEW:
QUICK OVERVIEW:
QUICK OVERVIEW:
Product Name: Weighing Load Cell Sensor 3Kg for Electronic Kitchen Scale YZC-131 With Wires
This straight bar load cell (sometimes called a strain gauge) can translate up to 5 kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the bar.
QUICK OVERVIEW:
Low noise operation.
Small fog particles.
High stability.
Driving Voltage: DC 3-12V.
High Conversion Efficiency.
Low Impedance Stable Waveform.
QUICK OVERVIEW:
QUICK OVERVIEW
On orders above ₹999
Min. order ₹250 for COD
Available on all orders
Delivered across India
Toll Free: 1800 209 0998