Maximum 20A current
Operating Voltage: 5V-12V
Size: 41mm*16mm*14mm
Net Weight: 13g
44 Keys RGB IR Remote Controller for 12V 5050 RGB LED Strip
SKU: AI2807 ₹126.26 (₹107.00 + GST)QUICK OVERVIEW
- Supply voltage: DC 12V
- Output current: 2 A each color
- Connecting mode: common anode
- Output: Three CMOS Drain-open Output
- Number Of buttons: 44
- Working temperature: -20℃-60℃
2 Channel 12V Relay Module Solid State High Level SSR DC Control 240V 2A with Resistive
SKU: AI3161 ₹160.48 (₹136.00 + GST)- Part Number: G3MB-202P
- Power supply:12VDC/160mA
- Switching Voltage (VAC):240@2A
- Isolation: Phototriac
CJMCU-2317 MCP23017 Serial Interface Module
SKU: AI0838 ₹285.56 (₹242.00 + GST)
16 Bit Bidirectional I/O Port.
Configurable Interrupt Output Pins
Configurable Interrupt Source.
High-Speed I2C Bus Compatible.
External Reset Input.
Low Standby Current
4 CHANNEL USB QC3.0 QC2.0 DC-DC Buck Converter Charging Step Down Module 6-32V 9V 12V 24V to Fast Quick Charger Circuit Board
SKU: AI6289 ₹328.04 (₹278.00 + GST)- Input voltage: 6~32V
- Type: 6-32V DC-DC Buck Converter Step Down to Fast Quick Charger Circuit Board
- Material: Metal + Plastic
- Output voltage: default 5V, automatically adjust between 3-12V after triggering fast charge
- Output power: up to 24W (5V/3.4A, 9V/2.5A, 12V/2A, etc.)
- Output voltage cable compensation function
- Conversion efficiency: 90%-97%
0.56 inch Red 3 Digit 7 Segment LED Display CC 12pin (Pack of 2)
SKU: AI3471 ₹39.18 (₹33.20 + GST)QUICK OVERVIEW:
- Bright Red LED chip, which is made from AlGaAs on GaAs substrate
- Blackface and RED LED segments
- Type: Common cathode
- No. of Pins: 12
- Low Current Consumption
- High Brightness
64Mbit 8MByte Data Flash module SPI Interface BV/FVinter
SKU: AI1583 ₹71.98 (₹61.00 + GST)- IC: 25Q64FVSIG-1935
- Capacity: 64M-bit / 8M-byte
- Clock frequency: <104MHz
- Working voltage: 2.7V ~ 3.6V
- Current: 4mA
- Dimensions (LxWxH): 15.5 x 14.5 x 3.7 mm
MINI560 DC-DC 3.3V 5A Step-Down Stabilized Voltage Source Module Note:SMD Resistance Marked 64B Represents 3.3V
SKU: AI3029 ₹62.54 (₹53.00 + GST)Input Voltage: 5V to 20V
Output Voltage: 3.3V
Maximum Output Current: 5A
Size: 30185.4mm
Switching Frequency: 500KHz
Topology: Non-isolated buck, synchronous rectification
Operating Temperature Range: -40°C to +85°C
Waveshare Solar Power Management Module, for 6V~24V Solar Panel
SKU: AI1488 ₹684.40 (₹580.00 + GST)QUICK OVERVIEW:
- Model: Waveshare Solar Power Management Module
- Solar panel input voltage : 6V~24V
- Micro USB input voltage : 5V
- Pinheader / USB output : 5V 1A
- Charging cutoff Voltage: 4.2V±1％
Waveshare RP2040-Zero Without Header
SKU: AI1559 ₹402.38 (₹341.00 + GST)- Processor: Raspberry Pi official RP2040 mini
- Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
- 264KB of SRAM, and 2MB of onboard Flash memory
- USB-C connector, keeps it up to date, easier to use
LM317 DC Linear Regulator, DC-DC 4.5~40V Turn 1.2~37V, Step Down Power Module, Adjustable
SKU: AI5950 ₹57.82 (₹49.00 + GST)- Output Current: 1.5A (minimum), 2.2A (typ)
- Input and output voltage difference (VI-VO): 40Vdc (max)
- Adjustable output voltage range: 1.2 ~ 37V
- Operating temperature: -55 to +150
- Output Current: 1.5A
- Input voltage: 4.2 ~ 40 V
5V Active Alarm Buzzer Module for Arduino
SKU: AI5243 ₹44.13 (₹37.40 + GST)- Operating voltage 3.3V-5V
- PCB Dimensions: 29 (L) x 14 (W) x 12 mm (H)
- Wire length: 20cm
- Weight: 7 gm.
- Frequency: 2500Hz
Serial DB9 RS232/485 9 pin Termina Male Nut
SKU: AI3865 ₹67.26 (₹57.00 + GST)- Brings all 9 pins of a DB9 connector to screw terminal blocks.
- Adapter used for communication debug.
- 9 pcs signal line was all lead out, name and number clearly labelled.
- All-copper DR9 seat, anti-oxidation, better contact.
- Military board, three anti-paint sprays an entire board, corrosion-resistant.
- Terminal spacing 3.96MM, screw hole diameter 2MM, need to use a width of 2MM screwdriver for assembly.
- Use of environmentally friendly copper terminals.
2 x 18650 Lithium Battery Shield for Arduino,ESP32 ,ESP8266
SKU: AI3452 ₹374.06 (₹317.00 + GST)QUICK OVERVIEW:
- Provides Multiple Output
- Good-Quality Construction
- Supports two 18650 Li-ion cells
- Dual Outputs 5V 3A; 3V 1A
2 x 2 Matrix 4 Push Button Keyboard Module
SKU: AI3437 ₹42.36 (₹35.90 + GST)
QUICK OVERVIEW:
- 2×2 Matrix Keyboard Module with 4 buttons
- Small in size and hence Save space
- More convenient to use
- Expanded development application modules for single chip
- With 4 keys and 4 pin
TTP229 16-Way Capacitive Touch Switch Digital keypad Module
SKU: AI3419 ₹89.68 (₹76.00 + GST)
QUICK OVERVIEW:
- Working voltage: 2.4V to 5.5V
- Built-in regulator
- Two modes
- Simple 8 key mode with independent 8 Channel parallel output.
- Advanced 16 Key modes with I2C interface output.
- Modes can be selected and configured by the user.
- Adjustable sensitivity
Capacitive Touch Switch HTTM Touch Button Sensor Module-RED
SKU: AI2960 ₹75.52 (₹64.00 + GST)
QUICK OVERVIEW:
- Operating voltage: + 2.7 ~ 6V
- Working temperature: 30 ~ + 70 Celsius
- OUT pin output voltage: + 3.3V ± 0.1V
- OUT pin Maximum output current: 500mA
220W AC-DC 110-245V to 24V 8A 9A 10A Switching Power Board
SKU: AI3846 ₹1,304.73 (₹1,105.70 + GST)QUICK OVERVIEW:
- AC input: AC 110-245v (Global common)
- AC frequency: 50HZ/60HZ
- Output voltage: 24V
- Output Current: 8A-10A
- Output Power: 220W
- Modulation: Pulse width modulation
Capacitive Touch Switch HTTM Touch Button Sensor Module-YELLOW
SKU: AI2961 ₹60.18 (₹51.00 + GST)
QUICK OVERVIEW:
- Operating voltage: + 2.7 ~ 6V
- Working temperature: 30 ~ + 70 Celsius
- OUT pin output voltage: + 3.3V ± 0.1V
- OUT pin Maximum output current: 500mA
Reed Switch Module
SKU: AI2586 ₹47.91 (₹40.60 + GST)QUICK OVERVIEW:
- Working voltage 3.3V-5
- Output format: digital switching output (0 and 1)A
- fixed bolt holes for easy installation
2 Channel USB QC3.0 QC2.0 DC-DC Buck Converter Charging Step Down Module 6-32V 9V 12V 24V to Fast Quick Charger Circuit Board
SKU: AI5915 ₹205.32 (₹174.00 + GST)- Two channels, allowing you to simultaneously charge two USB devices.
- Supports Quick Charge 3.0 (QC3.0) and Quick Charge 2.0 (QC2.0) standards.
- Accepts input voltages in the range of 6-32V. This flexibility allows the module to be used in various applications with different power sources, such as automotive systems (12V), power adapters, or other DC power supplies.
LilyPad LED Normal Green Color(1pcs)
SKU: AI4108 ₹15.69 (₹13.30 + GST)Type: LilyPad LED
Color: Green
Quantity: 1 piece
Attachment: Snap-apart design
Integration: Large sew tabs for easy sewing into fabric
8 Road/Channel Relay Module (with light coupling) 24V
SKU: AI2405 ₹377.60 (₹320.00 + GST)QUICK OVERVIEW:
- Operating Voltage: 24V DC
- Equipped with high-current relay [email protected] / [email protected]
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- LED Status indicators to indicate the relay ON/OFF status
- Mounting holes provided
0.96″ OLED Display Module – SPI/I2C – 128×64 – 7 Pin (Blue)
SKU: AI2323 ₹193.52 (₹164.00 + GST)QUICK OVERVIEW:
- Product Name: 0.96″ OLED Display Module – SPI/I2C – 128×64 – 7 Pin (Blue)
- Driver IC: SSD1306
- Resolution: 128 x 64
- Visual Angle: >160°
- Input Voltage: 3.3V ~ 6V
- Only Need 2 I/O Port Control
- Pixel Color: Blue
0.56inch 0-30V Three Wire DC Voltmeter Green
SKU: AI3941 ₹189.98 (₹161.00 + GST)
QUICK OVERVIEW
Add to cart
Add to Compare
- 0.56″Digital Voltmeter
- DC 0-30V 3 Wires
- Voltage Panel Meter LED Display
DC-DC DC8-55V to 3.3V 2A Step Down Buck Module Regulated Power Supply Module 2A High Current Circuit Board
SKU: AI2451 ₹185.26 (₹157.00 + GST)QUICK OVERVIEW:
- Model type: DC-DC Step Down Power Supply Module
- Size: 26 x 17.2mm
- Input voltage: 8-55V
- Output voltage: 3.3V
- Dissipation Power: 2A
Hi-Link HLK 20M15 15V/20W Switch Power Supply Module
SKU: AI0766 ₹450.76 (₹382.00 + GST)
Meet UL, CE requirements,
Ultra-thin, ultra-small
All voltage input (AC: 100 ~ 240V)
Low ripple and low noise
Output overload and short circuit protection
High efficiency, high power density
The product is designed to meet the requirements of the EMC and Safety Test
Low power consumption, environmental protection, no-load loss <0.1W
W5100 Ethernet Module Ethernet Network Module for Arduino
SKU: AI0256 ₹912.14 (₹773.00 + GST)Quick Overview
- Support Hardwired TCP/IP Protocols: TCP, UDP, ICMP, IPv4 ARP, IGMP, PPPoE, Ethernet
- 10BaseT/100BaseTX Ethernet PHY embedded
- Auto-Negotiation (Full-duplex and half duplex)
- Support Auto MDI/MDIX
- Simultaneously Supports to 4 independent sockets
- 0.18 µm CMOS technology
- 3.3V operation with 5V I/O signal tolerance
- 8. Provide Serial Peripheral Interface (SPI MODE 0, 3) support
Dual Display 3A DC-DC 5-23V To 0-16.5V Step Down Power Supply Buck Converter Adjustable LCD Step- down Voltage Regulator Without Case
SKU: AI6242 ₹559.32 (₹474.00 + GST)- Input voltage: 5-23V.
- Converter Type: DC-DC.
- Quantity: 1pc.
- Display Accuracy: 1%.
- Module Size: 62*44*18 mm.
5V 16 Channel Relay Module with Light Coupling LM2596S Power Supply
SKU: AI5291 ₹536.90 (₹455.00 + GST)- 5V relay with AC contact capacity of 10A 250V and optocoupler protection.
- Onboard power supply module does not need an external power supply. I / O port driver is active low.
- The module can be used as a microcontroller development board module and also as appliance control, PLC extended output.
- It is using the industry’s top -quality isolation optocouplers, strong anti-jamming ability, stable performance.
- The 1-16 road can be any full on/off or any road.
- All interfaces can be directly connected through the terminal leads, very convenient.
Type-c USB 90 degree angle conversion adapter
SKU: AI4387 ₹92.40 (₹88.00 + GST)This is a 90-degree Angled extension USB Type-C connector.
It is useful for outputting the flight controller connector in case it is difficult to access
USB: Type C
Dimensions: 21x9x12mm
0.96 Inch 80*160 IPS TFT Module 8pin(with GND VCC) ST7735 Chip
SKU: AI3563 ₹200.60 (₹170.00 + GST)QUICK OVERVIEW
- Product Type: TFT
- Resolution: 80*160
- Display Size: 0.96 Inch
- No.of Pins: 8
Momentary Tactile Push Button Module DC 5V Switch
SKU: AI2539 ₹30.44 (₹25.80 + GST)
Operating Voltage: 5V
Contact Resistance : 50mΩ max (initial)
Electrically Life:100,000 cycles
Environment temperature: -25°C to +105°C
Operating Force: 180/230(±20gf)
Seal temperature:250ºC-280ºC
I/O pins: 3 pins
LCD1602 Parallel LCD Display with Gray Backlight
SKU: AI2514 ₹118.00 (₹100.00 + GST)QUICK OVERVIEW:
- Model: LCD1602
- Character Color: Black
- Backlight: Gray
- Supply voltage: 5V
- Dimensions (LxWxH) mm.: 80 x 36 x 10
LC100A 2.5 LCD Digital High Precision Inductance/Capacitance (L/C) Meter
SKU: AI1966 ₹1,367.62 (₹1,159.00 + GST)
Overview
Add to cart
Add to Compare
- Supply voltage: 5V
- Interface to the power supply: Mini USB or Φ5.5 DC Socket
- Display: 1602 LCD
- Effective display digits: 4 digits
- LC Resonance measurement method of capacitance, Inductance and Large Inductance
- Charge-discharge method of measurement of large capacitance
LilyPad Buzzer
SKU: AI0731 ₹64.90 (₹55.00 + GST)QUICK OVERVIEW
- Wearable e-textile technology.
- Available Various input, output, power, and sensor boards.
- Washable
1 Channel 3-24V Relay Module Solid State Low Level SSR DC Control DC with Resistive Fuse
SKU: AI2969 ₹125.08 (₹106.00 + GST)QUICK OVERVIEW:
- Part Number: H3MB-052D
- Power supply: 3-24VDC/160mA
- Trigger Voltage (VDC): 3-24 VDC
- Switching Voltage (VDC): 50@2A
- Isolation: Phototriac
Waveshare Industrial Modbus RTU 8-Channel Relay Module RS485 Bus, Multi Protection
SKU: AI0825 ₹2,765.92 (₹2,344.00 + GST)
Power supply voltage: 5V
Communication interface: RS485
Relay channels: 8
Contact form: 1NO 1NC
Communication protocol: Standard Modbus RTU protocol
Red Electronic Building Blocks Big Key Button Module High Level Output
SKU: AI3081 ₹22.89 (₹19.40 + GST)
QUICK OVERVIEW:
- Product: Red Electronic Building Blocks Big Key Button Module High Level Output
- Interface: Standard electronic block (GND, VCC, SIG)
- Working voltage: 2-5.5VDC
- Working Current: 0.55mA(MAX)
- Output: digital level (press high, release low)
- Great for DIY projects
DC-DC 5A Step-Down Constant Voltage Constant Current MPPT
SKU: AI3860 ₹506.22 (₹429.00 + GST)QUICK OVERVIEW:
- DIY a voltage Regulator, with constant current function, Short-circuit proof, can protect the load.
- It can power supply for electronic devices.
- For a variety of battery charge, can observe the state of charge.
- charger for all kinds of batteries, with MPPT function, can enhance the charging current to double. With a constant current and prevents battery overcharge, effective protection of the battery.
- it can support high-power LED.
- As a car power supply , it can for your cell phone or digital products supply.
12V 8 Channel Relay Module
SKU: AI0336 ₹349.28 (₹296.00 + GST)Quick Overview:
- Using high-current relay, AC250V 10A DC30V 10A.
- Contact some independent wiring, safe and reliable.
- The standard interface can be extended to a variety of development boards.
- With fixed screw holes for easy installation.
- Suitable for a variety of platforms such as 8051/AVR/AVR/ARM.
AC Power Monitoring Digital Display
SKU: AI2786 ₹1,038.40 (₹880.00 + GST)QUICK OVERVIEW:
- Electrical parameter measurement function (voltage, current, active power, energy, frequency, power factor)
- Overload alarm function (over power alarm threshold, backlight, and power flashing to alarm).
- Power alarm threshold preset function (can set power alarm threshold).
- The energy can be reset using the key.
2 Channel Relay Module 30A with Optocoupler Isolation 12V Supports High and Low Triger （with Guide Rail）
SKU: AI4134 ₹464.92 (₹394.00 + GST)Supply Voltage: DC 12V
Quiescent Current: 5mA
Maximum Operating Current: 190mA
Trigger Mode: High and low-level trigger
Load Voltage: DC 30V / AC 250
Load Current: 30A
Relay Life: more than 100,000 times
24V RGB 5050 SMD LED Strip- 5Meter
SKU: AI2834 ₹494.42 (₹419.00 + GST)QUICK OVERVIEW:
- LED Glow Color: RGB
- Strip Length: 5 Meter
- Operating Voltage: 24V DC
- Strip width: 10 mm
- No. of LEDs: 60LED/Meter
- Protection Level: IP20 (Not Waterproof)
Waveshare 128×128, General 1.5inch OLED Display Module
SKU: AI1171 ₹1,215.40 (₹1,030.00 + GST)
Driver: SSD1327
Interface: SPI / I2C
Display color: White
Grayscale: 16
Resolution: 128×128
Viewing angle: >160°
Operating voltage: 3.3V / 5V
USB Input QC2.0/3.0 Decoy Module Boost Trigger Motherboard 9V 12V 20V Adjustable Power Supply
SKU: AI3062 ₹188.80 (₹160.00 + GST)Product name: PD2.0/3.0 decoy
Input voltage: DC 5V
Output voltage: 5V>9V>12V>15V>20V
Maximum output voltage: 20v
Maximum output current: 5A
Working temperature: -25 ℃ ~ 85 ℃
Working humidity: 5% ~ 95% RH
USB Type-B Female Head to DIP 4 pin Breakout PCB Module
SKU: AI2634 ₹18.64 (₹15.80 + GST)QUICK OVERVIEW:
- Connector Type: USB Type -B
- Compatible Devices: Printer Dev. Board etc
- PCB Size: 20 x 20 mm
- Weight: 4gm
1.3 Inch 128×64 OLED Display Screen Module with SPI Serial Interface – V2
SKU: AI2324 ₹286.74 (₹243.00 + GST)Quick Overview
- Driver IC: SH1106
- Resolution: 128 x 64
- Visual Angle: >160°
- Input Voltage: 3.3V ~ 6V
- Pixel Color: Blue
ESP8266 ESP-01 12V 1 Channel WiFi Relay Module Things Smart Home Remote Control Switch
SKU: AI4136 ₹337.48 (₹286.00 + GST)
Quick Overview: ESP8266 ESP-01 12V 1 Channel WiFi Relay Module Things Smart Home Remote Control Switch
Add to cart
Add to Compare
- Diode effusion protection
- Short response time
- Onboard Relay:12V,10A/250V AC 10A/30V DC relay
- Transmission distance : 400m (max)
- Operating Voltage:12 V
- Baud Rate: 9600
Waveshare RS485 to Ethernet Converter
SKU: AI0803 ₹2,619.60 (₹2,220.00 + GST)
Communication rate: 10/100Mbps
Baudrate: 600bps~230.4Kbps
Power supply: 5.0~7.0V (EU plug)
Operating current: 150mA (@5V)
Power consumption: <1W
DC5-12V PWM Power controler Remote Control Relay Model Remote Switch lamp PWM With LED Display
SKU: AI4403 ₹367.50 (₹350.00 + GST)
Type-C Input QC2.0/3.0 Decoy Module Boost Trigger Motherboard 9V 12V 20V Adjustable Power Supply
SKU: AI3060 ₹206.50 (₹175.00 + GST)- Product name: Type-C Input QC2.0/3.0 Decoy Module
- Input voltage: DC 5V
- Output voltage: 5V>9V>12V>15V>20V
- Maximum output voltage: 20v
- Maximum output current: 5A
- Working temperature: -25 ℃ ~ 85 ℃
- Working humidity: 5% ~ 95% RH
LM7806 6V DC / AC, Three Terminal Voltage, Regulator Power
SKU: AI2524 ₹88.50 (₹75.00 + GST)
QUICK OVERVIEW:
- Input Voltage: 9-24V DC/AC
- Output Voltage: 6V DC
- Max Current: 1.2A
SG-002 Handheld Analog ±12V/0-24mA Signal Generator and Rechargeable Battery Pocket Voltage Current Simulator Calibrator With Battery
SKU: AI4211 ₹1,641.38 (₹1,391.00 + GST)Power Supply: external micro USB-5V.
Voltage Output: 0-12V.
Current Output: 0-22mA.
Multiple Display: Just push the small button to switch the display mode
Serial DB9 RS232/485 9 pin Terminal Female Nut
SKU: AI3864 ₹70.80 (₹60.00 + GST)
Brings all 9 pins of a DB9 connector to screw terminal blocks
Adapter used for communication debug
9 pcs signal line was all lead out, name and number clearly labeled;
All-copper DR9 seat, anti-oxidation, better contact;
Military board, three anti-paint sprays an entire board, corrosion-resistant;
Terminal spacing 3.96MM, screw hole diameter 2MM, need to use a width of 2MM screwdriver for assembly;
Use of environmentally friendly copper terminals, through IS0-9001.
Add to cart
Add to Compare
CJMCU-4051 74HC4051 8 Channel Analog Multiplexer/Demultiplexer Breakout Board for Arduino
SKU: AI3436 ₹70.80 (₹60.00 + GST)QUICK OVERVIEW:
- Wide Analog Input Voltage Range: +/-5V
- Low “ON” Resistance: 80 ohm (type) at Vcc = 4.5V; 70 ohm (type) at Vcc = 6.0V; 60 ohm (type) at Vcc=9.0V
- Logic Level Translation: to enable 5V to communicate with +/-5V analog signals
- Board Size: 30 x 19 mm
2 Channel Relay Module 30A with Optocoupler Isolation 5V Supports High and Low Triger (with Guide Rail）
SKU: AI4133 ₹407.10 (₹345.00 + GST)Supply Voltage: DC 5V
Quiescent Current: 5mA
Maximum Operating Current: 190mA
Trigger Mode: High and low-level trigger
Load Voltage: DC 30V / AC250
Load Current: 30A
Relay Life: more than 100,000 times
Black Electronic Building Blocks Big Key Button Module High Level Output
SKU: AI2938 ₹18.64 (₹15.80 + GST)QUICK OVERVIEW:
- Interface: Standard electronic block (GND, VCC, SIG)
- Working voltage: 2-5.5VDC
- Working Current: 0.55mA(MAX)
- Output: digital level (press high, release low)
- Great for DIY projects
USB Adapter Board Male To Female Adapter Micro USB/Type-C Interface 4P 2.54mm
SKU: AI6346 ₹56.64 (₹48.00 + GST)- Product Number: XY-USB4
- Voltage: 5VDC
- Temperature range: -20℃ ~ 85℃
- Working Humidity range:0%-95%RH
- 2.54 mm – 4P (VCC/D-/D+/GND)
- It is stable.
- Multiple interfaces
Waveshare Industrial RS232/RS485 to Ethernet Converter (EU)
SKU: AI1544 ₹5,134.18 (₹4,351.00 + GST)
Communication rate: 10/100Mbps
Baudrate: 600bps~230.4Kbps
Power supply: 5.0~36.0V
Operating current: 86.5mA (@5V)
Power consumption: <1W
Add to cart
Add to Compare
Multi Coin Acceptor Selector, Model Name/Number: CS-616
SKU: AI0882 ₹1,198.88 (₹1,016.00 + GST)Usage/Application: All Coin Operated machines
Model Name/Number: CS-616
Accept The Currency: 6 types
LM2577 3A DC-DC Step UP LED Voltmeter 3-34 to 4-35V Adjustable Boost Converter Module
SKU: AI1014 ₹282.02 (₹239.00 + GST)
Input voltage range : 3-34V DC
Output voltage range : 4-35v DC adjustable
Output current:3A
Voltmeter range:0 to 40V,error +-0.1v
Multiple output regulator.
One button to switch input and output voltage display.
Power-down memory function.
Press the button for 3 seconds can turn OFF/ON the LED display.
Mini SD Card MP3 Sound Module For PIC Arduino WTV020-SD
SKU: AI0725 ₹126.26 (₹107.00 + GST)Supports FAT file system SD carrier
Supports playing of 4Bit ADCPM format files
Recognize the voice files automatically
Support microprocessor and key control
Audio output: 16bitDAC and PWM
Maximum voice storage: 512 voice
Operating voltage: DC 2.6 to 3.6V
Quiescent current: 16 μA (SD card is not inserted)
Waveshare Industrial Grade Isolated RS232 to RS485 Converter (With Power Adapter)
SKU: AI6116 ₹2,236.10 (₹1,895.00 + GST)QUICK OVERVIEW:
- Product type: industrial-grade isolated converter
- Baudrate: 300-921600bps
- Device port: RS232/RS485 standard complaint
- 1200m transmission distance of RS485
- 15m transmission distance of RS232
1.3 Inch I2C IIC OLED LCD Module 4pin (with GND VCC) Blue SH1106 Chip
SKU: AI3590 ₹310.34 (₹263.00 + GST)Display Size: 1.3 inches
Resolution: 128×64 pixels
Pixel Color Options: Yellow (128×16 pixels) or Blue (128×48 pixels)
Protocol Support: SPI, I2C
Operating Voltage: 3.3V – 5V
Operating Temperature: -30°C to 70°C
10000W Original Chips Thyristor Super Power Electronic Regulator can Change Light Speed and Temperature
SKU: AI3907 ₹1,031.32 (₹874.00 + GST)QUICK OVERVIEW:
- Use voltage: AC 220V
- Maximum power: 10000W resistive load limit power, room temperature is recommended for 5000W for a long time
- Voltage regulation: 0-100% (220 volts, 100-level adjustment, non-linear)
- It is suitable for water heater heat transfer, lighting dimming, small motor speed, electric iron thermostat
- It can be used in large appliances with an electric power of less than 10,000 watts.
10 Segments 4 Colors Stripe Digital Tubes 2R3Y4G1B Anode（BBS）
SKU: AI3521 ₹50.27 (₹42.60 + GST)
10 Segments 4 Colors Stripe Digital Tubes 2R3Y4G1B Anode Introducing the 10-Segment 4-Color Stripe Digital Tubes (Model: 2R3Y4G1B Anode, BBS)...
Add to cart
Add to Compare
Waveshare 2.13inch E-Ink Paper display HAT for Raspberry Pi, Three-Color
SKU: AI1491 ₹1,303.90 (₹1,105.00 + GST)QUICK OVERVIEW:
- Display Resolution: 212 x 104
- Display Color: Red, Black and White
- No backlight keeps displaying last content for a long time even when power is down
- Ultra low power consumption, basically power is only required for refreshing
- Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
0.56inch 0-100V Three Wire LED Display Digital DC Voltmeter-BLUE
SKU: AI2318 ₹75.52 (₹64.00 + GST)Operating Voltage: 0-100 VDC
It is a 3-wire display.
LED Color: Blue
Current Consumption : <40 mA.
Accuracy: 0.1 V.
Refresh Speed : Approx 200mS/time.
The display on Voltage: 3 V.(but not measure accurately up to 3.6V).
Waveshare PL2303 USB UART Board (Type C), USB To UART (TTL) Communication Module, USB-C Connector
SKU: AI1563 ₹300.90 (₹255.00 + GST)- Adopts PL2303GS new version device
- Supports windows XP/7/8/10/11/
- 3x LED indicators: TXD, RXD, PWR
Stainless Steel 1m Conductive Thread Wire for Wearable Lilypad (Pack of 5)
SKU: AI3352 ₹198.24 (₹168.00 + GST)QUICK OVERVIEW:
- Material: 12UM Stainless steel fiber
- Gram Weight: 0.2458g/m
- Strength: 2.8KGF.
- Length: 1m.
- Diameter(mm): 0.12.
- Resistance (Ω/m) : 27.
- 12m per spool (on plastic spools).
8CH Quality Test Hook Clip Logic Analyzer Test Folder for USB Saleae 24M
SKU: AI1527 ₹151.04 (₹128.00 + GST)Overview
- Cable Length: 19CM
- Weight: 20 g
- Cable Color: Multicolor
Waveshare UART TTL to Ethernet Converter
SKU: AI1545 ₹1,322.78 (₹1,121.00 + GST)M0 series 32-bit ARM processor
Protection: built-in 1.5KV electromagnetic isolation
Interface: 3.3V TTL
Supported protocols: IP, TCP, UDP, ARP, ICMP, DHCP, DNS, HTTPD Client
Support DHCP, DNS, AUTO MDI/MDIX, User-defined MAC address
Provide(socket), VB, C++, Delphi, Android, IOS
Piezo Buzzer 23mm
SKU: AI3583 ₹10.74 (₹9.10 + GST)QUICK OVERVIEW:
- Plate Diameter: 23mm
- Plate Material: Brass Resonant
- Frequency (kHz): 6.3 +/- .6kHz
24V 8 Channel Relay Module
SKU: AI3213 ₹416.54 (₹353.00 + GST)QUICK OVERVIEW:
- Header connector for connecting power and trigger voltage.
- LED on each channel indicates relay status.
- Screw terminal connector for easy relay output and aux power connection.
Wanptek WPS605H Adjustable DC Power Supply
SKU: AI5966 ₹7,952.02 (₹6,739.00 + GST)- Small size, lightweight, and high power density.
- Constant Voltage and Current automatic switching function
- The program-controlled encoder adjusts voltage and current.
- Three groups of four-digit digital tube displays, respectively display voltage, current, power.
- With OUTPUT button.
- With OCP short circuit alarm protection.
- With a USB fast charging interface, it supports multiple fast charging protocols.
- LED display of voltage, current and power, high precision and features of voltage stabilization, current limiting, and simple operation.
- Adjustable Output Voltage & Current: output voltage and output current can be continuously
- Adjusted between 0 and nominal value with fine regulating and coarse regulating
- It has over-voltage protection(OVP), over current protection(OCP), over-temperature protection
- Temperature controlled fan cooling, low noise, long life.
- Dual voltage input and convenient choice.
- Output Voltage ranges from 0 to rating voltage with continuous adjustment.
- Output current ranges from 0 to rating current with continuous adjustment
200W AC-DC 110-245V to 12V 17A Switching Power Board
SKU: AI3845 ₹1,294.46 (₹1,097.00 + GST)QUICK OVERVIEW:
- Voltage input: AC110~245V
- Frequency input: 50HZ-60HZ
- Output voltage: DC12V
- Output current: rated current 17A/peak current 20A
- Output power: 200W
Solar Energy Step-down and Step-up Module Red
SKU: AI3543 ₹252.52 (₹214.00 + GST)QUICK OVERVIEW:
Output Current: 12V to 5V maximum 2A (output other voltage, calculated by 15W current, formula 15 / output voltage = output current)
Output Power: maximum 15W (such as high temperature please strengthen the heat)
4 Channel 5V Relay Module Solid State High Level SSR DC Control 250V 2A with Resistive
SKU: AI3163 ₹365.80 (₹310.00 + GST)- Part Number: G3MB-202P
- Power supply:5VDC/160mA
- Trigger Voltage (VDC):5
- Switching Voltage (VAC):240@2A
- Isolation: Phototriac
DC 12V Bluetooth 4 Channels Relay Module, Internet Smart Remote, Control Mobile Phone, Switch Wireless Relay
SKU: AI3152 ₹689.12 (₹584.00 + GST)Effective Control Distance (on open area): 10m
Operating Voltage: 12VDC
Relay Type: 12V, 10A / 250V AC, 10A / 30V DC
Relay Endurance: 100,000 cycles continuously
Waveshare 1.69inch LCD Display Module, 240×280 Resolution, SPI Interface, IPS, 262K Colors
SKU: AI5904 ₹944.00 (₹800.00 + GST)- Operating Voltage: 3.3V / 5V
- Communication Interface: 4-wire SPI
- Driver: ST7789V2
- Display Panel: IPS
Free Shipping
On orders above ₹999
COD Available
Min. order ₹250 for COD
GST Invoice
Available on all orders
1,50,000+ Orders
Delivered across India
Expert Support
Toll Free: 1800 209 0998
Product categories
- Show All Categories
- 3D Printers and Parts (379)
- Batteries, Chargers and Accessories (811)
- Clearance Sale (0)
- Development Boards (438)
- DIY Learning and Robot Kits (117)
- Drone Parts (1364)
- EBike parts (140)
- Electronic Components (783)
- Electronic Modules and Displays (1201)
- FPV Freestyle Mid/High KV Drone Motors (0)
- IoT and Wireless (544)
- Mechanical Parts and Workbench Tools (241)
- Motors & Drivers & Pumps & Actuators (583)
- Sensor Modules (639)
- Electronic Modules and Displays (1201)
- Character LCD Displays (2)
- Display modules (265)
- Electronic Modules (755)
- Measuring Instruments (102)
- Power Supply (62)
- Signal Generator Module & Oscilloscopes (17)