QUICK OVERVIEW:
Operating Voltage (VDC) : 3 ~ 9
Constant Current : 20A
Maximum Current : 25A
Battery Input : Li-Po 2S
Driver Frequency : 2KHz
Support High Voltage (HV) Receivers
Input voltage: 3.7V-27V
Max current: 30A
18AWG silicone cable
JST Plug
Cable length 20cm
Weight: 11g – With LED indicator lamp
Length: 10″ (25.4 cm).
Pitch: 4.5 (11.43 cm).
Weight: 14 gm.
Shaft Diameter: 6 mm.
Total length: 10 inch / 254 mm.
Model: X6 Plus 2480
Color: Black
Propeller Type: CCW
Prop. Diameter (inch): 24
Pitch(inch): 8
Quick Overview:
TVL: 600TVL
Sensor Type: CMOS
Operating Voltage: 3.7V – 5V
Current Consumption: ~100mA
Lens Type: Fixed lens
Weight: Around 3 grams
Product: Cyclone 45A BLHeil_S ESC
Voltage: Support 2-6S power supply
Working current: 35A
Support protocols: dshot 125/300/600
Model: FPV cameras
Signal System: PAL
Min illumination: 0.01Lux/1.2F
Image Sensor: 1/3CMOS SUPER HAD II
S/N Ratio: > 60Db(AGC OFF)
Electronic Shutter Speed PAL: 1/50-100.000
QUICK OVERVIEW: UBEC-5V/3A
QUICK OVERVIEW:
Model: Brushed
Current: 3.3V-6V, long-distance running 2.7A, peak 10A
Size: 20x9mm
Weight: 2g
Usage: suitable for modeling Car, changing toys, intelligent building blocks, etc.
Specifications:
Quick Overview:
Specification:
Model 30A 2-6S ESC
Current Range 30A to 40A
Voltage 4 V-16.8V
Connector Female-Banana connector
Specifically optimized firmware ESC, the ESC has a very good compatibility
Highly intelligent, adaptive ability, extremely easy to use
Quick Overview:
30A BLDC ESC Brushless Electronic Speed Controller:
The 30A Brushless DC (BLDC) Electronic Speed Controller (ESC) is designed to control the speed, direction, and braking of brushless motors in RC vehicles, drones, and other electric models. This ESC offers smooth and precise control, enhancing the performance and maneuverability of your model.
This is the new and improved V2 of the Unmanned Telemetry kit. The full features and specifications are listed below but the main features are that both air and ground module are now interchangeable, and each is with a USB connector and a DF13 connector. Please note that to connect to Pixhawk, it is a good idea to also purchase a 6-pos to 6-pos cable as this is easier and better than using the cable included.
Specifications:
| Frequency (MHz) | 433 |
| Rated Power (W) | 100mW |
| Range(m) | 1600 |
| Receive Sensitivity(dBm) | -121 |
| Serial Interface | 3.3V UART |
| Air Data Rates(kbps) | 250 |
| Operating Current (A) | 1.1 |
| Voltage(V) | 3.6 to 7 |
| Operating Temperature (°C) | -10 to 85 |
| Weight(gm) | 36 |
Frequency:5.8 GHz
Impedence:50Ω
Dimension:15x18x62 mm
Weight:8 gm
| Material | Plastic |
| Weight(gm) | 8 |
| Base Diameter | 30 mm |
| Height (mm) | 130 |
| Color | Black |
| Compatible | 250 Quad Copter |
Compatible with all drone frames.
2*40/8pcs, ensuring a secure fit for various battery sizes.
Provides stability during flights and maneuvers.
Made from high-quality materials for long-lasting use.
QUICK OVERVIEW:
QUICK OVERVIEW:
Quick Overview:
Brand: Ready to sky
Model: 40A 2-6S ESC
Current: 40A
Burst Current(10sec): 60A
Programming: Timing(high/middle)
Ubec-8A 6-36V 2~8S Lipo Esc:
On orders above ₹999
Min. order ₹250 for COD
Available on all orders
Delivered across India
Toll Free: 1800 209 0998