Operating Voltage (VDC) : 3 ~ 9
Constant Current : 20A
Maximum Current : 25A
Battery Input : Li-Po 2S
Driver Frequency : 2KHz
Network support: Quad-Band 850/900/1800/1900 MHz – works on GSM networks in all countries across the world.
TTL serial interface compatible with 3.3V and 5V MCU
the small size is suitable for all kinds of sleeve belt type and embedded.
Power supply: 5 -20 V.
Power Interface: 2.54 mm Pin header or MICRO USB interface.
Brand: Peacefair
Model: PZEM-004T
Operating Voltage: 80-260VAC
Test Voltage: 80-260VAC
Rated Current: 100A
Rated power: 100A / 22000W
Operating frequency: 45-65Hz
Measurement accuracy: 1.0
Operating Frequency Range: 433.4—473.0MHz
Transmit Power Max: 20dBm
Power Supply Voltage: DC 3.2V ~5.5V
Long Communication Distance: About 1000 meters at the default setting
Dimension: 5 x 7 cm
Quantity: 2 PCS
Base Material: FR4
Copper Thickness: 1-4 OZ
Board Thickness: 1.6 mm
PCB Weight: 10 gm
PCB Color: Green
QUICK OVERVIEW
Interface: I2C
Operating Voltage: 3-5VDC
Ports: 8-bit Parallel Ports
Can be used with Arduino and Raspberry Pi
Low density: lightweight, low inertia.
Capability to absorb shock and vibration as a result of elastic compliance.
Ability to operate with minimum or no lubrication, due to inherent lubricity.
The relatively low coefficient of friction.
Operating Voltage(VDC): 3~12
Shaft Length (mm): 8.5
Shaft Diameter (mm): 5.5 (Single D-type)
No Load Current: 40-180mA.
Rated Speed(After Reduction): 60 RPM
Rated Torque: 1 Kgcm
Diameter :12mm
Environmental conditions
Ambient temperature: -50 ~ +70 C
Relative humidity: up to 98% at +40 C
Lightweight and Easy to Mount on PCB
Gold plated brass Contact Points
Best Body Material and Build Quality
Good environmental and Temperature resistance
The dual cell can be used Separately or as Single cell, Holder
QUICK OVERVIEW:
Operating voltage: 12vDC
Output Voltage: 12 V
Output type: Double output
Detection range: adjustable 10-80 MM
Max Power Load: 36 W
Delayed off time: none
Field of application: DC, constant pressure
Load current: 3A optional
Standby current: 10mA
QUICK OVERVIEW
QUICK OVERVIEW:
Operating voltage: 5V.
Quiescent Current: 4mA.
Receiving frequency: 315MHz.
Receiver sensitivity: -105 dB.
Communication Distance (m): 20 ~ 200 meter.
LM393 based design.
Can detect ambient brightness and light intensity.
Adjustable sensitivity (via blue digital potentiometer adjustment).
Output Digital – 0V to 5V, Adjustable trigger level from preset.
LEDs indicating output and power.
Operating Voltage: 3.3V to 5V DC.
Operating Current: 15ma.
LM358 chip onboard.
100 gain of the circuit design.
10K onboard adjustable resistance, you can adjust the magnification.
Onboard power indicator.
The chip has led major pin can be directly input and output signals.
Holds 2 18650 batteries
With a cover and Locking
Comes with an ON/OFF switch
Cable length: 15cm
Internal Connection: Series
Model: A2212/6T
Motor KV: 2200
Max. Efficiency Current: 4-10A
No Load Current: 0.5A @10V
Current Capacity: 12A/60S
LiPO Batteries: 2S-3S
Quick review :
QUICK OVERVIEW:
Features: 6S AB Clip Buckle / Charger Wire protector (Pack of 5)
Type: Phenolic
Size: 70mm*50mm
Copper Layer Laminated
Easy for Soldering
QUICK OVERVIEW:
Wide voltage power supply (6~30V)
supports micro USB 5.0V power supply
The interface is clear and simple, powerful, easy to understand
All set parameters automatically save power.
The 41F is a switched Hall-effect IC designed for contactless switching applications. It incorporates various components on a single chip, including an on-chip Hall voltage generator for magnetic sensing, an amplifier to amplify the Hall voltage, a Schmitt trigger to provide switching hysteresis for noise rejection, and an open-collector output. This integrated design allows for precise and reliable switching in response to changes in magnetic fields without the need for physical contact, making it suitable for a wide range of applications requiring non-contact switching functionality.
Model: PCT-222T
Rated Voltage: 220V
Rated Impulse Voltage: 4KV
Material of Insulation: Modified Nylon(PA66)
Compact, Super easy, Reliable, and Reusable.
Color: Transparent
Rated Current:32A
Rated power: 7KW
Gauge:28~12AWG
User-programmable digital filters for gyroscope, accelerometer, and temp sensor
Digital-output temperature sensor
9-Axis MotionFusion by the on-chip digital motion processor (DMP)
Auxiliary master I2C bus for reading data from external sensors
Minimal cross-axis sensitivity between the accelerometer and gyroscope axes
MEMS structure hermetically sealed and bonded at the wafer level
10,000 g shock tolerant
400kHz fast mode I2C for communicating with all registers
On orders above ₹999
Min. order ₹250 for COD
Available on all orders
Delivered across India
Toll Free: 1800 209 0998