QUICK OVERVIEW:
Manufacturer: Arduino Officials
Operating Voltage (logic level): 5V
8 analog inputs ports: A0 ~ A7
14 Digital input / output ports: TX, RX, D2 ~ D13
1 pair of TTL level serial transceiver ports RX / TX
Using Atmel Atmega328P-AU MCU
There is a bootloader installed in it
Standard 0.1” spacing DIP (breadboard friendly).
Manual reset switch.
Fully compatible with High-Speed HDMI with Ethernet specification (Version 1.4).
A superb cable with excellent audio-visual transfer properties that deliver signal without compromising purity and balance.
Nickel-plated connectors for highest signal transfer rate and resistance in corrosion.
Large gauge PVC jacket provides maximum shielding against wear and tear and extreme temperatures.
Reinforced quad-layer braided shielding and Mylar-foil shielding provides utmost protection against RF and EM interference.
Supports 480i, 480p, 720p, 1080i, 1080p, 1440p and 4K@60p resolution HDMI plug to HDMI plug leads
Compatible with Raspberry Pi 4 Model B and all previous Raspberry Pi models
QUICK OVERVIEW:
QUICK OVERVIEW:
QUICK OVERVIEW:
Compatible With Raspberry Pi 3, 3B+,4B
High-Quality Material
Converts One GPIO into Three GPIO
Design with good heat dissipation, do not have to install the cooling fan or heatsink.
This case is constructed out of high-quality aluminium material.
Suitable for raspberry pi 4 model b motherboard only
Easy to install and insert the micro sd card
Display Size: 5
Resolution: 800 x 480 pixel
Supply Voltage: 5V @1A
Very easy to assemble with Raspberry Pi.
Module: T Type GPIO Extension Adapter
Breadboard Size: 400 Tie Point
Terminal Strip: 300 tie-points
Compatible with Raspberry Pi Model B+
QUICK OVERVIEW:
Micro USB-B (Female /Male) Converter Adapter
Mini HDMI to HDMI Adapter makes it easy to output data from more than zero raspberry, it supports high-speed data transfer.
Micro USB to USB Female Cable Take Advantage to Match USB Devices.
Male header GPIO is special for Raspberry Pi Zero.
Acrylic Adjustable Camera Mount Module for Raspberry Pi Mount Module for Raspberry Pi:
50mm outer diameter
Thin 0.8mm PCB
Microcontroller: ATmega32U4
Operating Voltage: 3.3V
Aluminum Material
Adopting Aluminum Material, With Oxidation Sand-Blasting Surface
Compatible With Certain Raspberry Pi HATs
The Raspberry Pi Zero Case has been designed to fit both the Pi Zero and the Pi Zero W.
The case consists of two parts. It has a standard base featuring a cut-out to allow access to the GPIO, and a choice of three lids i.e a Plain Lid, a GPIO Lid and a Camera Lid.
QUICK OVERVIEW:
QUICK OVERVIEW:
QUICK OVERVIEW:
Material: High-quality aluminum
Dimensions: 8.8 mm x 8.8 mm x 5 mm
Weight: Approximately 2 grams
Color: White
Adhesive: pre-applied thermal adhesive for easy installation
QUICK OVERVIEW:
Suitable for UNO.
Convenient Linker Kit Series modules and pcDuino / UNO connection.
Using 2.54 Interface.
DuPont perfect support line.
QUICK OVERVIEW:
QUICK OVERVIEW:
Waveshare Aluminum Alloy Case For Jetson Orin, With Camera Holder, Suitable for Jetson Orin Nano And Jetson Orin NX Kits:
|
Model: Waveshare Transparent and Black Acrylic Case for Raspberry Pi 5, Supports installing Official Active Cooler.
A set of 3 heatsinks
Self-adhesive thermal layer for easy application
The thermal resistance of 27°C/W
Material:
1 x Aluminium
2 x Copper
Colour: Red and Copper.
Reduces the risk of hardware failure due to overheating
Low profile, will fit into most cases.
Simple, Passive cooling. No need for noisy fans.
Perfectly sized for the RPi’s CPU
Quick Overview:
Supports NVMe M-Key SSDs
Connects to Raspberry Pi 5 via 16-pin PCIe
Compatible with 2280/2260/2242/2230 M.2 sizes
Handles up to 4 SSDs, supports SSD boot
Faster than TF card storage
Quick Overview:
Compact SMD-friendly castellated design
Enhanced security: Secure boot, tamper protection
Supports 3.3V or 5V logic (default 3.3V)
Ideal for IoT, robotics, and wearable tech
Comes with comprehensive SDK and tutorials
Quick Overview:
Waveshare Multi-functional All-in-one Mini-Computer Kit Designed for Raspberry Pi 5
Compatibility: Designed for Raspberry Pi 5 module
Case Material: Aluminum alloy
Type: PCIe to M.2 interface (adapter board not included)
Internal PCIe Slot: Options available for integrating a PCIe adapter board
Waveshare PCIe TO MiniPCIe Adapter For Raspberry Pi 5
Plug-and-play PCIe to MiniPCIe adapter
Designed for Raspberry Pi 5
Supports wireless NICs and AI modules
High-speed PCIe ×1 Gen2 connection
USB Bluetooth support with wireless module
Compact, easy-to-mount HAT+ form factor
On orders above ₹999
Min. order ₹250 for COD
Available on all orders
Delivered across India
Toll Free: 1800 209 0998