Model: MG90S
Weight: 13 gm
Operating voltage: 4.8V~ 6.6V
Servo Plug: JR
Stall torque @4.8V : 1.8kg-cm
Stall torque @6.6V : 2.2kg-cm
QUICK OVERVIEW
QUICK OVERVIEW:
QUICK OVERVIEW
QUICK OVERVIEW:
QUICK OVERVIEW:
Model number: TEC1-12715
Operating Voltage: 12V
Maximum Voltage- Umax (V) : 15V
Maximum Current- Imax (A) : 15A
Maximum Power : 230 W
Power Cord: 25cm.
High sensitivity to Ammonia, Sulfide and Benzene
Stable and Long Life
Detection Range: 10 – 300 ppm NH3, 10 – 1000 ppm Benzene, 10 – 300 ppm Alcohol
Heater Voltage: 5.0V
Dimensions: 18mm Diameter, 17mm High excluding pins, Pins – 6mm High
Long life and low cost
Quick review :
QUICK OVERVIEW:
Item:30A brushed ESC
Voltage support: 4~8V.
Forward 30A
UBEC output: voltage 5.7V, current 1A.
QUICK OVERVIEW:
,
Compatible Chips:
ATMEGA Series
Tiny Series
Classic Series
CAN Series
PWM Series
QUICK OVERVIEW
QUICK OVERVIEW:
Voltage: 3.3V or 5V.
Port: Analog.
Resistance: 10K.
Dimensions: 91 x 21 x 30 mm(LxWxH)
Weight: 18 gm.
QUICK OVERVIEW:
QUICK OVERVIEW:
Product Name: Metal Button Switch
Hole diameter: 12mm
Material: Nickel plated brass
LED color: Red
Shell Color: Silver
Max current: 4A
Led voltage: 12-24V
Operation type: Momentary Self-reset
Switch contact : Flat head /High head
Waterproof level:IP66
Contact type:1NO1NC
Features:
QUICK OVERVIEW:
Overcharge Voltage Range: 4.25-4.35V ± 0.05V
Over Discharge Voltage Range: 2.3-2.7V ± 0.05V
Operating Temperature: -40°C to +50°C
Storage Condition: -40°C to +80°C
Quiescent Current: Less than 30μA
Balance Current: Approximately 40-50mA
XH-A-2.5mm-4 pin Wafer Male Connector Through Hole Straight:
QUICK OVERVIEW
Operating voltage:( 5V DC).
Detector distance: (1CM).
Adjust the potentiometer, let the modules work normally.
Small and easy to use module.
It comes with a Buzzer for metal detection indication.
QUICK OVERVIEW:
Charging voltage: 25.5V
Charging current: 20A (MAX)
Overcharge detection voltage: 4.28 ± 0.05V
Overcharge protection delay: 0.1S
Overcharge release voltage: 4.08 ± 0.05V
Over discharge detection voltage: 2.55 ± 0.08V
Overdischarge detection delay: 0.1S
The overdischarge release voltage: 2.9 ± 0.1V
Wire Size: 30AWG
Color: red
length: 5m
Rated Voltage: 600V
Rated Temperature: -60°C~+200°C
Conductor: Tinned Copper
Conductor construction: 11/0.08
Insulation: Silicone Rubber
Note: Wire will also made available as per requirement
24 pin Breakout
PCB Size: 25 x 40 mm
Connector: C type Female
Power Supply: 3.3~5.5V DC
Output: 4-pin single row
Measurement Range: Humidity 20-90%RH, Temperature 0~50℃
Accuracy: Humidity ±5%RH, Temperature ±2℃
Resolution: Humidity 1%RH, Temperature 1℃
Interchangeability: Fully Interchangeable
Long-Term Stability: <±1%RH/year
QUICK OVERVIEW:
Quick reveiw :
QUICK OVERVIEW:
Operating Voltage: 3.5V to 5.5V
Operating current: 0.3mA (measuring) 60uA (standby)
Output: Serial data
Temperature Range: -40°C to 80°C
Humidity Range: 0% to 100%
Resolution: Temperature and Humidity both are 16-bit
Accuracy: ±0.5°C and ±1%
Good electrical conductivity
This is Momentary type push-button switch
Easy to use
Light Weight
Function: Momentary
On orders above ₹999
Min. order ₹250 for COD
Available on all orders
Delivered across India
Toll Free: 1800 209 0998