QUICK OVERVIEW:
Working Voltage: 3.5 to 24V DC (min tested working voltage 3.5V).
Max current draw: 15mA @ 5V.
Working Flow Rate: 1 to 30 Liters/Minute.
Maximum water pressure: 1.75 MPa.
Flow rate pulse characteristics: Frequency (Hz) = 7.5 * Flow rate (L/min).
QUICK OVERVIEW
On-board level shift circuit
Arduino UNO R3 and the compatible board can directly connect to this module;
Interface logic voltage: 3.3V / 5V compatible(On-board level shift circuit);
Working voltage: 4.5~5.5V (Onboard 3.3V LDO Regulator);
Working current: 240mA(MAX).
Temperature Range: -40°C to +80°C (±0.5°C accuracy)
Humidity Range: 0% to 100% RH (±2–5% RH accuracy)
Operating Voltage: 3.3V to 6V
Update Rate: Every 2 seconds
Interface: Single-wire digital signal
Built-in ADC: Provides calibrated digital output
Compact Size: Easy to integrate in various projects
Applications: IoT, weather monitoring, smart homes
Diameter :12mm
Environmental conditions
Ambient temperature: -50 ~ +70 C
Relative humidity: up to 98% at +40 C
High precision determination accurate to 1 Lu for different lights
Operating Voltage: 3-5VDC
Built-in 16bit A/D converter
I2C interface
QUICK OVERVIEW:
Power supply: 1.5 ~ 3.6V.
Humidity measure range: 0-100%RH.
Temperature measure range: -40 ~ +105 °C.
Max. power consumption: 2.7 µW.
Communication: I2C.
QUICK OVERVIEW:
User-programmable digital filters for gyroscope, accelerometer, and temp sensor
Digital-output temperature sensor
9-Axis MotionFusion by the on-chip digital motion processor (DMP)
Auxiliary master I2C bus for reading data from external sensors
Minimal cross-axis sensitivity between the accelerometer and gyroscope axes
MEMS structure hermetically sealed and bonded at the wafer level
10,000 g shock tolerant
400kHz fast mode I2C for communicating with all registers
Digital signal output
18B20 Temperature Sensor Chip
Resolution adjustment ranges from 9-12 bytes.
Send data via a pin
Temperature measurement ranges: -55°C to +125°C, be accurate to 0.5°C.
Quick review :
Model: XKT-412.
Input Voltage: 12V.
Output Voltage: 5V.
Operating Current: 1.2-2 A.
Receive Coil: 3mm, the receiver output 5V / 1A current
Normal Use Distance: 2 ~ 10mm
Operating Current: 1.2-2 A.
Model: PCT-222T
Rated Voltage: 220V
Rated Impulse Voltage: 4KV
Material of Insulation: Modified Nylon(PA66)
Compact, Super easy, Reliable, and Reusable.
Color: Transparent
Rated Current:32A
Rated power: 7KW
Gauge:28~12AWG
Model: HC-SR505
Operating Voltage Range: DC4.5-20V
Average Current Consumption (mA): 0.06
Distance Measuring Range: 3 meters
Dimensions (mm) LxWxH: 10 x 23 x 5
Weight (gm): 10
Delay time: Default 8S + -30% (can be customized)
Working Temperature Range: -20°C ~ 80°C
Sensor Lens Diameter: 10mm
Induction angle: <100-degree cone angle
QUICK OVERVIEW
Holds 2 x 18650 batteries.
With a cover and locking.
Comes with an ON/OFF switch.
It also includes DC Jack.
Easy install, convenient to use.
Diameter :12mm
Environmental conditions
Ambient temperature: -50 ~ +70 C
Relative humidity: up to 98% at +40 C
Contact Rating: 10 W.
Switching Voltage: 220 V.
Switching Current: 0.5 A.
Breakdown Voltage: 220 VDC.
Carry Current: 1 A.
Contact Resistance: 100 mΩ.
Product Type: Bend Pin Header
Pin Configuration: 3 rows of 4 pins each
Pitch: 2.54mm (standard spacing for through-hole components)
Breakable Design: Can be easily separated into individual headers if needed.
QUICK OVERVIEW
28-Pins in a Dual In-Line Packaging (2×14 pins)
Capabilities: SPI, I2C, USART, PWM
2.7V – 5.5V Input Voltage Range
1µA – 1.5mA Power Consumption (3V)
10-bit Analog-to-Digital Converter (8-channels)
Interrupt Capabilities (2-channel)
32KB of Flash Memory for Programming
Type: Photoresistor (Light Dependent Resistor)
Operating Principle: Photoconductivity
Dark Resistance: Greater than 200 MΩ
Light Resistance: Less than 2.4KΩ
Sensitivity: High sensitivity to varying light levels
Diameter: 5mm
Color: White (Note: Color may vary based on availability)
Material: High resistance semiconductor
Operating Temperature: -40°C to +70°C
9450 2 blades Self Lock Propeller CW & CCW
Size: 9 inches and larger
Hub type: standard
Diameter (inches): 9
Pitch: 4.5
Blades: 2
Product: DC Conversion Power Module
Input Voltage Range:2.8V-5.5V
Output Voltage:+/-12V (V +:+12V;V-:-12V)
Output Current:+12V stable output current capability of 50mA,-12V stable output current capability 30mA,almost meet all ADC, DAC and amplifier applications
Size:2.4×1.2cm
5V Tolerant Inputs.
Supports Hot Insertion.
I2C Bus and SMBus Compatible.
Low Standby Current.
1-to-8 Bidirectional Translating Switches.
Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II.
Active-Low Reset Input.
Power Up With All Switch Channels Deselected.
Width: 10 mm
Length: About 33m.
Type: Polyimide Tape.
Heat Resistance: 200℃.
Thickness Tolerance: ±10% .
One-side Self-adhesive.
QUICK OVERVIEW:
Self-locking/Latching Self-reset
Good electrical conductivity
This is Momentary type push-button switch
Easy to use
Light Weight
Function: Momentary
DB9 RS232 D-SUB Male Adapter 9-pin Port Adapter to Terminal Connector Signal Module
Suitable for variety of pin connections required to use serial communications industrial control products
No need solder! It is convenient
DB9 male adapter with screw
MODEL NO: CW-113-V1.1
Input Voltage: AC 100 – 240 V (50 HZ/60 HZ).
Output Voltage: DC 24V.
Output Current: 6A to 9A (no voltage drop).
Output Power: 150W (maximum 220 W).
Overload Protection: Yes.
Over Current Protection: Yes.
Short Circuit Protection: Yes.
Note: Wire will also made available as per requirement
Bluetooth version: 4.2
Supply current: 1A
Power supply voltage: 5V
Max. Audio Output Power: 10W
No soldering Required on Module
Voltage: DC 2.4V – 5V
Average Current Consumption: < 2mA
Output mode: level or UART
Detection distance: 2cm – 450cm
Working temperature: -20°C to +70°C
It features temperature compensation.
Provides two output modes level or UART.
QUICK OVERVIEW:
Single Battery Charger Module
Programable Charge Curren Form 0.1A to 2A
Programable Precharge Current Form 10% to 100%
Based on Tp5000 Battery Charger IC
QUICK OVERVIEW
Input Voltage: DC3.6V-6V
Input Current: 2A-5A
Output Voltage: DC 400KV (Please pay attention to safety when used)
Input Line Length: about 100mm (red is positive)
Output Line Length: about 160mm
Center Frequency: 433 MHz
Wavelength: ¼-wave
VSWR: < 2.0 typical at center
Peak Gain: 3.6dBi
Impedance: 50-ohms
QUICK OVERVIEW:
Contact Rating: 10 W.
Switching Voltage: 220 V.
Switching Current: 0.5 A.
Breakdown Voltage: 220 VDC.
Carry Current: 1 A.
Contact Resistance: 100 mΩ.
QUICK OVERVIEW:
IC Name: IRF 9540
Package/Case: DIP-3
Working Voltage : 3 – 5.5V.
The maximum Current : 49mA 5V.
Range : 20cm to 800 cm
On orders above ₹999
Min. order ₹250 for COD
Available on all orders
Delivered across India
Toll Free: 1800 209 0998